Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lake effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

266 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Combining Eddy Covariance Towers, Field Measurements, and the MEMS 2 Ecosystem Model Improves Confidence in the Climate Impacts of Bioenergy With Carbon Capture and Storage

ABSTRACT Carbon dioxide removal technologies such as bioenergy with carbon capture and storage (BECCS) are required if the effects of climate change are to be reversed over the next century. However, BECCS demands extensive land use change that may create positive or negative radiative forcing impacts upstream of the BECCS facility through changes to in situ greenhouse gas fluxes and land surface albedo. When quantifying these upstream climate impacts, even at a single site, different methods can give different estimates. Here we show how three common methods for estimating the net ecosystem carbon balance of bioenergy crops established on former grassland or former cropland can differ in their central estimates and uncertainty. We place these net ecosystem carbon balance forcings in the context of associated radiative forcings from changes to soil N 2 O and CH 4 fluxes, land surface albedo, embedded fossil fuel use, and geologically stored carbon. Results from long term eddy covariance measurements, a soil and plant carbon inventory, and the MEMS 2 process‐based ecosystem model all agree that establishing perennials such as switchgrass or mixed prairie on former cropland resulted in net negative radiative forcing (i.e., global cooling) of −26.5 to −39.6 fW m −2 over 100 years. Establishing these perennials on former grassland sites had similar climate mitigation impacts of −19.3 to −42.5 fW m −2 . However, the largest climate mitigation came from establishing corn for BECCS on former cropland or grassland, with radiative forcings from −38.4 to −50.5 fW m −2 , due to its higher plant productivity and therefore more geologically stored carbon. Our results highlight the strengths and limitations of each method for quantifying the field scale climate impacts of BECCS and show that utilizing multiple methods can increase confidence in the final radiative forcing estimates.

Falvo, Grant [Department of Plant, Soil and Microb↗
DOE OSTI2025

Scientific program for the Forward Physics Facility

The recent direct detection of neutrinos at the LHC has opened a new window on high-energy particle physics and highlighted the potential of forward physics for groundbreaking discoveries. In the last year, the physics case for forward physics has continued to grow, and there has been extensive work on defining the Forward Physics Facility and its experiments to realize this physics potential in a timely and cost-effective manner. Following a 2-page Executive Summary, we first present the status of the FPF, beginning with the FPF’s unique potential to shed light on dark matter, new particles, neutrino physics, QCD, and astroparticle physics. We then summarize the current designs for the Facility and its experiments, FASER2, FASER 2, FORMOSA, and FLArE.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Wellbore Stability and Mud Loss Management in Geothermal Drilling: Optimizing Mud Weight to Mitigate Tensile Wellbore Fracturing at The Geysers, California

As part of a U.S. Department of Energy (DOE) Geothermal Technologies Office-funded initiative, Geysers Power Company, LLC, a subsidiary of Calpine Corporation, has been working to enhance drilling performance at the world’s largest geothermal field, The Geysers, in northern California. In a recent drilling operation of the GDC-36 well, excessive mud losses were encountered, initially addressed through repeated but largely ineffective cement plugging. Ultimately, the most effective strategy was to drill blind through the loss zones, made feasible by the high rate of penetration (ROP) achieved with PDC bits, allowing significant progress before the mud tanks were depleted and water-sensitive argillic formation layers could collapse. In response to these challenges, the project team explored alternative methods to minimize downtime and risks associated with cement plugging and continuous mud loss and to contemplate the driving mechanisms for the losses. Wellbore imaging using Formation MicroImager (FMI) and Ultrasonic Borehole Imager (UBI) tools revealed longitudinal tensile fractures, which were attributed to mud weights exceeding the minimum circumferential stress resulting from the native stress field and formation pressure. This study examines the mud losses encountered and leverages wellbore imaging data to understand the mechanisms behind mud induced tensile fracturing in specific rock facies. Understanding fracture behavior across different lithologies is crucial, as fractures within the reservoir can enhance steam migration throughout the system. The reservoir at The Geysers lies within the Mesozoic Franciscan Assemblage, a tectonic mélange formed by subduction. It consists of metamorphosed turbidite sandstone (greywacke) and mudstone (argillite), oceanic upper crust (including greenstone and chert), and serpentinized ultramafic rocks - each exhibiting distinct geomechanical fracturing properties. The structural fabric of the Franciscan Assemblage was shaped by low-angle Mesozoic thrust faulting and later overprinted by sub-vertical strike-slip structures related to the Pacific-North American plate boundary. A wellbore stability model was developed using core measurements and logs to simulate fracturing scenarios during drilling under varying stress conditions. These simulations guided the development of an optimized mud weight management strategy that should enable adaptive adjustments during drilling, reducing the likelihood of tensile fracturing and mud losses, ultimately improving operational efficiency.

15 GEOTHERMAL ENERGY↗
DOE OSTI2026

Introducing furanocoumarin biosynthetic genes in tomato results in coumarins accumulation and impacts growth

Over the past three decades, efforts to decipher plant metabolism have shed light on key enzymes driving specialized metabolite biosynthesis. Although only few pathways have been completely investigated to date, their characterization paves the way for exploring the potential effects of specialized metabolites on plant physiology. Among them is the linear furanocoumarin pathway, which was recently completed to produce up to psoralen. In this study, we report the first metabolic engineering of the linear furanocoumarin pathway to enable artificial psoralen production in tomato, through the integration of four genes coding for the enzymes: Umbelliferone Synthase (PsDiox), Demethylsuberosin Synthase (PsPT1), Marmesin Synthase (FcCYP76F112) and Psoralen Synthase (PsCYP71AJ3). Metabolic analyses confirmed the detection of small quantities of psoralen in the transgenic tomato line, but also highlighted a larger accumulation of coumarins and particularly scopoletin. Using morphophysiological and multi-omics analyses, we explorate how such metabolic modifications, could impact growth and affect plant physiology.

coumarins↗
DOE OSTI2026

Disorder-induced spin-cluster magnetism in a doped kagome spin liquid candidate

The search for new quantum spin liquid materials relies on systems with strong frustration such as spins on an ideal kagome lattice. However, lattice imperfections can have substantial effects which are as yet not well understood. In recent work, the two-dimensional kagome system YCu 3 ⁢(OH) 6 ⁢[(Cl 𝑥 ⁢Br (1−𝑥) ) 3−𝑦 ⁢(OH) 𝑦 ] has emerged as a leading candidate hosting a Dirac spin liquid which appears to survive at least for 𝑥 < 0.4, associated with alternating-bond-hexagon (ABH) disorder. Here in magnetic samples with 𝑥 = 0.58, 𝑦 = 0.1 we report unusual in-plane ferromagnetic canting (FM) of the in-plane antiferromagnet (AFM), with an unusually wide regime of short-ranged order, and propose theoretical models to explain this behavior. First, we show that Kitaev-type exchanges naturally arise on the kagome lattice to second order in the known Dzyaloshinskii-Moriya exchanges, and that these interactions can produce the unusual in-plane FM canting from antichiral AFM. Second, we propose a phenomenological model of weakly FM-canted spin clusters to describe the short-ranged regime and analyze quantum fluctuations in an ABH toy model to show how ABH disorder can stabilize this regime. Here, the combination of experimental observation and theory suggests that kagome-Kitaev interactions and ABH disorder are necessary for describing the magnetic fluctuations in this family of materials, with potential implications for the proposed proximate spin liquid phase.

Seth, Arnab [Georgia Institute of Technology, Atla↗
DOE OSTI2025

Beyond traditional diagnostics: Identifying active galactic nuclei using spectral energy distribution fitting in DESI data

Active galactic nuclei (AGN) are typically identified through their distinctive X-ray or radio emissions, mid-infrared (MIR) colors, or emission lines. However, each method captures different subsets of AGN due to signal-to-noise (S/N) limitations, redshift coverage, and extinction effects, underscoring the necessity for a multiwavelength approach for comprehensive AGN samples. This study explores the effectiveness of spectral energy distribution (SED) fitting as a robust method for AGN identification. Using CIGALE optical-MIR SED fits on DESI Early Data Release galaxies, we compare SED-based AGN selection (AGNFRAC ≥ 0.1) with traditional methods including BPT diagrams, WISE colors, X-ray, and radio diagnostics. The SED fitting identifies ∼70% of narrow- and broad-line AGN and 87% of WISE-selected AGN. Incorporating high S/N WISE photometry reduces star-forming galaxy contamination from 62% to 15%. Initially, ∼50% of SED-AGN candidates are undetected by standard methods, but additional diagnostics classify ∼85% of these sources, revealing low-ionization nuclear emission-line regions and retired galaxies potentially representing evolved systems with weak AGN activity. Further spectroscopic and multiwavelength analysis will be essential to determine the true AGN nature of these sources. SED fitting provides complementary AGN identification, unifying multiwavelength AGN selections. This approach enables more complete – albeit somewhat contaminated – AGN samples, which are essential for upcoming large-scale surveys where spectroscopic diagnostics may be limited.

Seyfert↗
DOE OSTI2026

Genetic and metabolic drivers of membrane remodeling in Clostridium thermocellum under alcohol stress

Clostridium thermocellum is a leading candidate for consolidated bioprocessing of lignocellulosic biomass into biofuels due to its native cellulolytic capabilities. Beyond ethanol, C. thermocellum is being developed as a platform for producing higher-chain alcohols such as isobutanol and n-butanol. However, its physiological adaptations to alcohol stress remain poorly understood. Here, we investigate how C. thermocellum remodels its membrane lipid composition in response to exogenous ethanol, n-butanol, isobutanol, and butyrate. Exposure to linear alcohols such as n-butanol or to organic acids like butyrate increased the proportion of straight-chain fatty acids in the membrane at the expense of branched-chain species, whereas exposure to the branched alcohol isobutanol produced the opposite effect. Isotope tracer experiments demonstrated that C. thermocellum directly incorporates the carbon backbones of exogenous alcohols and acids into fatty acids, providing a mechanistic basis for these contrasting shifts. We show that the bifunctional aldehyde/alcohol dehydrogenase AdhE is essential for the assimilation of exogenous alcohols into fatty acids, acting through its oxidative activity by first oxidizing alcohols to aldehydes and then converting them to acyl-CoA intermediates. Deletion of the pyruvate:ferredoxin oxidoreductase isozyme pfor4 abolished branched-chain fatty acid synthesis, but supplementation with isobutanol restored production, indicating that Pfor4 substitutes for the canonical branched-chain α-keto acid dehydrogenase complex. These findings reveal two distinct routes for branched-chain fatty acid production in C. thermocellum: a Pfor4-dependent pathway from α-keto acid intermediates derived from amino acid synthesis, and an AdhE-dependent salvage pathway that assimilates exogenous branched-chain alcohols.

Acetivibrio thermocellus↗
DOE OSTI2025

Recrystallization, cracking, and erosion of dispersoid-strengthened tungsten materials during exposure to divertor plasmas

In this study, we investigated the effects of combined intense particle and heat flux exposure on advanced tungsten plasma-facing materials within the DIII-D fusion facility. Our test matrix included two types of dispersoid-strengthened tungsten (containing either 100 nm diameter TiO 2 or Ni particles), along with high-purity polycrystalline tungsten as a reference. This experiment relied on a sample geometry angled at 15° relative to the divertor surface, thereby allowing the surfaces to intercept steady-state perpendicular heat fluxes (q ⟂ ) ranging from 10.1 to 19.6 MW/m 2 . During each shot, the samples were exposed to 42 Hz edge-localized modes (ELMs), allowing us to test the material response to transient heating. We correlated the exposure conditions with extensive post-test surface composition analysis and microscopy to determine how the plasma modified each surface. The angled specimens closest to the strike point received the highest combined heat and particle flux and melted midway through the experiment. EBSD analysis revealed they were completely recrystallized throughout, with an average grain size >100 µm. On the other hand, the specimens that received a lower steady state heat flux survived with more superficial surface damage. Whereas the high-purity polycrystalline tungsten exhibited a higher surface roughness, the dispersoid-strengthened material exhibited more extensive shallow inter-granular cracking. In addition, the surface was depleted of dispersoids following plasma exposure, possibly because of evaporation and/or sputtering. The results described here provide insights into the performance of these materials in a fusion environment which can guide further optimization for use in long-pulse devices.

Kolasinski, Robert D. [Sandia National Laboratorie↗
DOE OSTI2025

Review on Preprocessing Strategies, Deactivation, Thermal Safety, and Future Perspectives in Lithium-Ion Battery Recycling

The rapid growth in the use of lithium-ion batteries (LIBs) in electric vehicles, consumer electronics, and renewable energy storage has made effective end-of-life management essential. Recycling LIBs is critical not only for resource recovery and environmental protection but also for ensuring safety and economic viability. This review focuses on the preprocessing technologies that precede typical recovery processes, including disassembly, sorting, discharging, electrolyte removal, dismantling, thermal treatment, separation, and flotation. These steps play a foundational role in determining the efficiency, safety, and environmental impact of LIB recycling. LIBs pose substantial fire and explosion risks due to residual charge, flammable electrolytes, and reactive materials. The conditions and successive progression of the exothermic reactions which lead to thermal runaway has been discussed. It also explores secure deactivation techniques such as external circuit discharge, saline immersion, and thermomechanical methods, alongside fire prevention strategies including the use of flame retardants, elimination of oxidants, and reduction of heat generation and accumulation. Challenges and future directions are outlined, highlighting the need for standardized designs, automation, and safer, more sustainable recycling infrastructure. Furthermore, this review is distinguished by its focused analysis of preprocessing and deactivation steps, with particular attention to the thermal safety engineering aspects of LIB recycling.

Battery deactivation↗
DOE OSTI2025

Pyrogenic Organic Matter Laboratory Experiment: Aerobic Respiration and Geochemistry from Variably Inundated Stream Sediments (v3)

This dataset supports a broader study examining the effects of variable inundation and pyrogenic organic matter on ecosystem respiration. The dataset provides data generated from a laboratory batch experiment investigating the interaction between variable inundation conditions (wet and dry sediment) and pyrogenic organic matter (burned and unburned treatments). The contents include time series dissolved oxygen, sediment geochemistry data, and field metadata (including qualitative information on instream and river corridor characteristics). This data package was originally published in November 2025. It was updated in April 2026 (v2; new and modified files) and May 2026 (v3; modified files). See the change history section in the readme for more details For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions. This dataset is comprised of (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) international generic sample number (IGSN) mapping file; (5) readme; (6) field protocol; (7) sample name metadata; (8) an environmental context picture for the dry and inundated sampling locations; and (9) a subfolder with sample data from the sediment incubation experiment. The sample data subfolder contains (1) dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC); (2) total nitrogen (TN); (3) gravimetric moisture; (4) partial pressure and production rates of carbon dioxide, methane, and nitrous oxide; (5) field wet sediment mass, dry sediment mass, water mass, and field wet sediment volume in incubation and sediment NPOC/TN vials; (6) methods codes; (7) respiration rates, pH, and temperature from after the incubation, raw time series dissolved oxygen and temperature, and a subfolder containing associated plots and scripts; (8) ions; (9) FTICR-MS methods; and (10) a subfolder of 12 Tesla (12T) FTICR-MS data. This folder contains the CoreMS processed data and three subfolders, one containing the .xml files, one containing the CoreMS output files, and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS). All files are .csv, .pdf, .R, .xml, .html, .Rmd, .py, .cal, .json, or .jpg.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Enhancing Hydrogen Production from Bioenergy Crops via Photoreforming

Photoreforming perennial bioenergy crops (willow, Miscanthus , and poplar) has the potential to produce H 2 with reduced environmental impacts. To understand the compositional effects of the biomass on the average rate of H 2 production over the first 30 min of reaction ( r H 2 ), the r H 2 values of model biomass component (i.e., cellulose, hemicellulose, and lignin) mixtures were compared with those from the raw biomass. The higher cellulose or hemicellulose content in multicomponent mixtures resulted in higher r H 2 , whereas lignin reduced the hydrogen production rate. However, with raw biomass, the ratio of biomass components alone did not determine the r H 2 via photoreforming, with rates of hydrogen production for different varieties of willow ranging between 1.9 μmol h -1 and 12.3 μmol h -1 , 11.8 μmol h -1 for a poplar, and 6.8 μmol h -1 for a miscanthus biomass. In addition, comparable r H 2 values of raw poplar and its extracted cellulose via an IonoSolv treatment indicated the possibility of using raw biomass materials without delignification for generating H 2 via photoreforming. Importantly, r H 2 was positively correlated with the interaction between water and the biomass, as assessed by NMR relaxation via an examination of the T 1 /T 2 ratio. A stronger water-biomass interaction resulted in a higher r H 2 . Genetic modification of biomass has been suggested as a putative way to improve the r H 2 of biomass with an enhanced interaction with water. This research enhances the understanding of factors influencing H 2 production from lignocellulosic biomass by photoreforming and supports the breeding and management of perennial biomass crops to maximize H 2 yields while minimizing land area requirements.

biomass↗
DOE OSTI2025

Chemical versus physical pressure effects on the structure transition of bilayer nickelates

The observation of high-T c superconductivity (HTSC) in concomitant with pressure-induced orthorhombic-tetragonal structural transition in bilayer La 3 Ni 2 O 7 has sparked hopes of achieving HTSC by stabilizing the tetragonal phase at ambient pressure. Chemical pressure, introduced by replacing La 3+ with smaller rare-earth R 3+ has been considered as a potential route. However, our experimental and theoretical investigation reveals that such substitutions, despite causing lattice contraction, actually produce stronger orthorhombic distortions, requiring higher pressures for the structural transition. A linear extrapolation of P c versus the average size of A-site cations (<$r_A$>), yields a putative critical value of (<$r_A$>) ≈ 1.23 Å for P c ≈ 1 bar. The negative correlation between P c and (<$r_A$>) indicates that replacing La 3+ with smaller R 3+ ions is unlikely to reduce P c to ambient pressure. Instead, substituting La 3+ with larger cations like Sr 2+ or Ba 2+ might be a feasible approach. Our results provide guidance for realizing ambient-pressure HTSC in bilayer nickelates.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A dendritic strontium river isoscape for fisheries applications in the Sacramento River basin, California, USA

Objective Understanding the origins and movements of fish is fundamental to effective conservation and fisheries management. Strontium isotope ratios ( 87 Sr/ 86 Sr) in otoliths provide a powerful tracer of natal origin and migratory pathways. However, existing 87 Sr/ 86 Sr isoscapes for the Sacramento River basin, an ecosystem that supports ecologically and economically important salmon populations, rely on discrete classification approaches that overlook unsampled habitats and do not incorporate spatial uncertainty. Our objective was to develop a continuous, network-explicit 87 Sr/ 86 Sr isoscape with quantified uncertainty to fill in data gaps and enable probabilistic assignments of fish origin and movement. Methods We used river water 87 Sr/ 86 Sr data from 106 sites (1997–2021) to develop spatial stream network models that use dendritic connectivity and watershed characteristics (lithology, bedrock age, and land cover) to predict river water 87 Sr/ 86 Sr throughout the basin. Models were fitted using maximum and restricted likelihood and were evaluated via Akaike’s information criterion and leave-one-out cross validation. We produced both historical (pre-dam) and present-day (below-dam) isoscapes, delineated uncertainty-informed isotopic ranges using k -means clustering, and applied a proof-of-concept Bayesian assignment to estimate natal origins and early rearing habitats for two endangered winter-run Chinook Salmon Oncorhynchus tshawytscha. Results Cross validation indicated strong performance of the 87 Sr/ 86 Sr model (leave-one-out cross validation: R 2 = 0.91; root mean square error = 0.0005). Uncertainty-informed clustering identified 19 isotopic “suites” (reaches with indistinguishable 87 Sr/ 86 Sr values) in present-day anadromous habitats and 25 suites in the historical network. Example natal and early rearing assignments included predictions that challenged expectations for juvenile salmon migration based on predicted river 87 Sr/ 86 Sr compositions. Conclusions This study developed a continuous, network-explicit 87 Sr/ 86 Sr isoscape that integrates existing river data to predict 87 Sr/ 86 Sr in unsampled reaches and the likely achievable range and resolution of otolith-based origin and life history inference. The resulting river isoscape provides a valuable tool to predict salmon movements and identify habitats supporting their survival and growth that otherwise might remain undetected. Coupling these predictions with complementary approaches that ground-truth juvenile presence (e.g., targeted fish surveys) represents an important step toward science-informed restoration and management of critical habitats throughout the Sacramento River basin.

Environmental sciences↗
DOE OSTI2025

Observation of Orbital-Selective Dual Modulations in an Anisotropic Antiferromagnetic Kagome Metal TbTi 3 ⁢Bi 4

Orbital selectivity is pivotal in dictating the phase diagrams of multiorbital systems, with prominent examples including the orbital-selective Mott phase and superconductivity. The intercalation of anisotropic layers represents an effective method for enhancing orbital selectivity and thereby shaping the low-energy physics of multiorbital systems. Despite its potential, related experimental studies, especially those elucidating the correlation between orbital selectivity and magnetism, remain limited. In this work, we systematically examine the interplay between orbital selectivity and magnetism in the newly discovered anisotropic kagome TbTi 3 ⁢Bi 4 single crystal, and report the coexistence of orbital-selective dual-band modulations (𝑞 1 ∼ 1/3⁢𝑎*, 𝑞 2 ∼ 0.28⁢𝑏*) within the antiferromagnetic (AFM) state. By combining soft x-ray and vacuum ultraviolet angle-resolved photoemission spectroscopy measurements, neutron powder diffraction, scanning tunneling microscopy, and density-functional-theory calculations, we identify these dual-band reconstructions as manifestations of the AFM order driven by a (approximately 1/3, 0.28, 0) nesting instability of the intercalated Tb 5⁢𝑑 𝑥⁢𝑧 orbitals. These orbital-selective modulations induce unusual momentum-dependent band folding and lead to the emergence of Dirac cones only at the $\bar{M}$ 1 point, signaling a topological phase transition in the AFM state. Importantly, the discovery of orbital-selective (approximately 1/3, 0.28, 0) AFM order offers crucial insights into the mechanism underlying the fractional magnetization plateau in this kagome AFM metal. Our findings not only underscore the essential role of both conducting and localized electrons in determining the magnetic orders of Ln⁢Ti 3 ⁢Bi 4 (Ln = lanthanide) kagome metals but also offer a pathway for manipulating magnetism through selective control of anisotropic electronic structures.

Zhang, Renjie [Shanghai Jiao Tong University (Chin↗