Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lattice distortion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Tunable Lattice Reconstruction, Triangular Network of Chiral One-Dimensional States, and Bandwidth of Flat Bands in Magic Angle Twisted Bilayer Graphene

The interplay between interlayer van der Waals interaction and intralayer lattice distortion can lead to structural reconstruction in slightly twisted bilayer graphene (TBG) with the twist angle being smaller than a characteristic angle θ c . Experimentally, the θ c is demonstrated to be very close to the magic angle (θ≈1.08°). Here we address the transition between reconstructed and unreconstructed structures of the TBG across the magic angle by using scanning tunneling microscopy (STM). Our experiment demonstrates that both structures are stable in the TBG around the magic angle. By using a STM tip, we show that the two structures can be changed to each other and a triangular network of chiral one-dimensional states hosted by domain boundaries can be switched on and off. Consequently, the bandwidth of the flat band, which plays a vital role in the emergent strongly correlated states in the magic angle TBG, is tuned. This provides an extra control knob to manipulate the exotic electronic states of the TBG near the magic angle.

1-dimensional systems↗
DOE OSTI2024

Low Temperature Dynamic Polaron Liquid in a Manganite Exhibiting Colossal Magnetoresistance

Polarons - fermionic charge carriers bearing a strong companion lattice deformation - exhibit a natural tendency for self-localization due to the recursive interaction between electrons and the lattice. While polarons are ubiquitous in insulators, how they evolve in transitions to metallic and superconducting states in quantum materials remains an open question. Here, we use resonant inelastic x-ray scattering to track the electron-lattice coupling in the colossal magneto-resistive bi-layer manganite La 1.2 Sr 1.8 Mn 2 O 7 across its metal-to-insulator transition. The response in the insulating high-temperature state features harmonic emissions of a dispersionless oxygen phonon at small energy transfer. Additionally, upon cooling into the metallic state, we observe a drastic redistribution of spectral weight from the region of these harmonic emissions to a broad high energy continuum. In concert with theoretical calculations, we show that this evolution implies a shift in electron-lattice coupling from static to dynamic lattice distortions that leads to a distinct polaronic ground state in the low temperature metallic phase - a dynamic polaron liquid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Interfacial electronic states of misfit heterostructure between hexagonal ZnO and cubic NiO

The combination of materials with dissimilar symmetries can induce a large amount of stress at the interfacial layer of films, thereby promoting the appearance of novel properties in related devices. The study of the interfacial state is critical for determining the inner mechanism. In this work, the misfit heterostructure between cubic NiO films and wurtzite ZnO is investigated. A NiO film grown using molecular beam epitaxy on a ZnO substrate shows a highly (100)-oriented texture featuring three domains with a rotation angle of 30°, which is in agreement with first principles calculations. Misfit-induced dislocations and lattice distortions within the interfacial layers of the NiO film give rise to interfacial electronic states, which are different from those in bulk; these electronic states are analyzed by in situ synchrotron-based x-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, x-ray absorption spectroscopy, and ex situ electron energy loss spectroscopy. Additionally, the origin of these interfacial states is discussed. This work aims to provide insights for the integration of semiconducting hexagonal ZnO with other functional materials that have a cubic symmetry. Additionally, we investigate the integration of photon and electron-based techniques to explore the interfacial states of complex interfaces, which is an important aspect of material science.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Kitaev physics in the two-dimensional magnet NiPSe 3

The Kitaev interaction, found in candidate materials such as α − RuCl 3 , occurs through the metal ( M )-ligand ( X )-metal ( M ) paths of the edge-sharing octahedra because the large spin-orbit coupling (SOC) on the metal atoms activates directional spin interactions. Here, we show that even in 3 d transition-metal compounds, where the SOC of the metal atom is negligible, heavy ligands can induce bond-dependent Kitaev interactions. In this work, we take as an example the 3 d transition-metal chalcogenophosphate NiPSe 3 and show that the key is found in the presence of a sizable SOC on the Se p orbital, one which mediates the super-exchange between the nearest-neighbor Ni sites. Our study provides a pathway for engineering enhanced Kitaev interactions through the interplay of SOC strength, lattice distortions, and chemical substitutions. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗
DOE OSTI2024

Three-dimensional higher-order saddle-point-induced flatbands in Co-based kagome metals

The saddle point (Van Hove singularity) exhibits a divergent density of states in two-dimensional systems, leading to fascinating phenomena such as strong correlations and unconventional superconductivity, yet it is seldom observed in three-dimensional (3D) systems. In this work we find two types of 3D higher-order saddle points (HOSPs) in emerging 3D kagome metals YbCo 6⁢ Ge 6 and MgCo 6 ⁢Ge 6 . Both HOSPs exhibit a singularity in their density of states, which is significantly enhanced compared to the ordinary saddle point. The HOSP near the Fermi energy generates a flatband extending a large area in the Brillouin zone, potentially amplifying the correlation effect and fostering electronic instabilities. Two types of HOSPs exhibit distinct robustness upon element substitution and lattice distortions in these kagome compounds. Our work paves the way for engineering exotic band structures, such as saddle points and flatbands, and exploring interesting phenomena in Co-based kagome materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Strain-tunable microwave-resonance technique for quantum materials

By integrating a dielectric microwave resonator with a piezoelectric-based strain device, we develop an in situ strain-tunable microwave spectroscopy technique that enables contactless measurements of material properties under strain. To demonstrate the capability of this device, we measure the strain-dependent microwave surface impedance of the representative iron-based superconductor Ba⁢Fe 2 (As 1−𝑥 ⁢P 𝑥 ) 2 at the slightly overdoped composition. We successfully control and observe the suppression of superconductivity under both compressive and tensile anisotropic lattice distortions along the tetragonal [110] T direction, as manifested by changes in the quality factor and resonance frequency shifts of microwave resonance. Furthermore, strain-induced changes in microwave surface resistivity, an extension of conventional DC-limit transport elastoresistivity to the microwave regime, provide information on electronic anisotropy equivalent to that of DC elastoresistivity, while offering a contactless alternative. Furthermore, our strain-tunable cavity therefore serves as a powerful, contactless probe of fundamental material properties under strain and may also potentially facilitate the design of hybrid quantum systems with strain-engineered quantum degrees of freedom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Dislocation contrast on X-ray topographs under weak diffraction conditions

The contrast of dislocations in 4H-SiC crystals shows distinctive features on grazing-incidence X-ray topographs for diffraction at different positions on the operative rocking curve. Ray-tracing simulations have previously been successfully applied to describe the dislocation contrast at the peak of a rocking curve.The present work shows that the dislocation images observed under weak diffraction conditions can also be simulated using the ray-tracing method. Furthermore, these simulations indicate that the contrast of the dislocations is dominated by orientation contrast. Analysis of the effective misorientation reveals that the dislocation contrast in weak-beam topography is more sensitive to the local lattice distortion, consequently enabling information to be obtained on the dislocation sense which cannot be obtained from the peak.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-energy micrometre-scale pixel direct conversion X-ray detector

The objective of this work was to fabricate and characterize a new X-ray imaging detector with micrometre-scale pixel dimensions (7.8 µm) and high detection efficiency for hard X-ray energies above 20 keV. A key technology component consists of a monolithic hybrid detector built by direct deposition of an amorphous selenium film on a custom designed CMOS readout integrated circuit. Characterization was carried out at the synchrotron beamline 1-BM-B at the Advanced Photon Source of Argonne National Laboratory. The direct conversion detector demonstrated micrometre-scale spatial resolution with a 63 keV modulation transfer function of 10% at Nyquist frequency. In addition, spatial resolving power down to 8 µm was determined by imaging a transmission bar target at 21 keV. X-ray signal linearity, responsivity and lag were also characterized in the same energy range. Finally, phase contrast edge enhancement was observed in a phase object placed in the beam path. This amorphous selenium/CMOS detector technology can address gaps in commercially available X-ray detectors which limit their usefulness for existing synchrotron applications at energies greater than 50 keV; for example, phase contrast tomography and high-resolution imaging of nanoscale lattice distortions in bulk crystalline materials using Bragg coherent diffraction imaging. Here, the technology will also facilitate the creation of novel synchrotron imaging applications for X-ray energies at or above 20 keV.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The seeds and homogeneous nucleation of photoinduced nonthermal melting in semiconductors due to self-amplified local dynamic instability

Laser-induced nonthermal melting in semiconductors has been studied over the past four decades, but the underlying mechanism is still under debate. Here, by using an advanced real-time time-dependent density functional theory simulation, we reveal that the photoexcitation-induced ultrafast nonthermal melting in silicon occurs via homogeneous nucleation with random seeds originating from a self-amplified local dynamic instability. Because of this local dynamic instability, any initial small random thermal displacements of atoms can be amplified by a charge transfer of photoexcited carriers, which, in turn, creates a local self-trapping center for the excited carriers and yields the random nucleation seeds. Because a sufficient amount of photoexcited hot carriers must be cooled down to band edges before participating in the self-amplification of local lattice distortions, the time needed for hot carrier cooling is the response for the longer melting time scales at shorter laser wavelengths. This finding provides fresh insights into photoinduced ultrafast nonthermal melting.

42 ENGINEERING↗
DOE OSTI2024

Unrecoverable lattice rotation governs structural degradation of single-crystalline cathodes

Transitioning from polycrystalline to single-crystalline nickel-rich cathodes has garnered considerable attention in both academia and industry, driven by advantages of high tap density and enhanced mechanical properties. However, cathodes with high nickel content (>70%) suffer from substantial capacity degradation, which poses a challenge to their commercial viability. Here, leveraging multiscale spatial resolution diffraction and imaging techniques, we observe that lattice rotations occur universally in single-crystalline cathodes and play a pivotal role in the structure degradation. These lattice rotations prove unrecoverable and govern the accumulation of adverse lattice distortions over repeated cycles, contributing to structural and mechanical degradation and fast capacity fade. These findings bridge the previous knowledge gap that exists in the mechanistic link between fast performance failure and atomic-scale structure degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Extended flexibility of neutron Larmor diffraction for increased diffraction range in mosaicity measurements

Larmor diffraction (LD) is a neutron scattering technique that offers enhanced resolution by harnessing the Larmor precession of neutron spins in a magnetic field. By encoding subtle changes in neutron momentum transfer into significant alterations in the Larmor phase of neutron spins, LD can be employed to measure lattice expansion, lattice distortion, and mosaicity with exceptional resolution. As originally proposed by Rekveldt et al., LD necessitates the magnetic field boundaries to be tilted to be parallel to the crystal plane of interest. Here, this report explores the fundamental principles shared between LD and spin-echo small-angle neutron scattering (SESANS). Drawing inspiration from the flexibility of SESANS to adjust magnetic field boundaries to optimize the resolution in the measurement of the neutron momentum transfers q, we will demonstrate that the strict requirement of parallel alignment between the magnetic field boundaries and the crystal plane can be relaxed for the measurements of mosaicity. Such relaxation will expand the accessible diffraction angles for these situations that are highly constrained.

Larmor diffraction↗
DOE OSTI2021

Phase transition dynamics in one-dimensional halide perovskite crystals

Triiodide perovskites CsPbI 3 , CsSnI 3 , and FAPbI 3 (where FA is formamidinium) are highly promising materials for a range of optoelectronic applications in energy conversion. However, they are thermodynamically unstable at room temperature, preferring to form low-temperature (low-T) non-perovskite phases with one-dimensional anisotropic crystal structures. While such thermodynamic behavior represents a major obstacle toward realizing high-performance devices based on their high-temperature (high-T) perovskite phases, the underlying phase transition dynamics are still not well understood. In this work, we use in situ optical micro-spectroscopy to quantitatively study the transition from the low-T to high-T phases in individual CsSnI 3 and FAPbI 3 nanowires. We reveal a large blueshift in the photoluminescence (PL) peak (~38 meV) at the low-T/high-T two-phase interface of partially transitioned FAPbI 3 wire, which may result from the lattice distortion at the phase boundary. Compared to the experimentally derived activation energy of CsSnI 3 (~1.93 eV), the activation energy of FAPbI 3 is relatively small (~0.84 eV), indicating a lower kinetic energy barrier when transitioning from a face-sharing octahedral configuration to a corner-sharing one. Further, the phase propagation rate in CsSnI 3 is observed to be relatively high, which may be attributed to a high concentration of Sn vacancies. Our results could not only facilitate a deeper understanding of phase transition dynamics in halide perovskites with anisotropic crystal structures, but also enable controllable manipulation of optoelectronic properties via local phase engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Phase transition dynamics in one-dimensional halide perovskite crystals

Triiodide perovskites CsPbI 3 , CsSnI 3 , and FAPbI 3 (where FA is formamidinium) are highly promising materials for a range of optoelectronic applications in energy conversion. However, they are thermodynamically unstable at room temperature, preferring to form low-temperature (low-T) non-perovskite phases with one-dimensional anisotropic crystal structures. While such thermodynamic behavior represents a major obstacle toward realizing high-performance devices based on their high-temperature (high-T) perovskite phases, the underlying phase transition dynamics are still not well understood. Here we use in situ optical micro-spectroscopy to quantitatively study the transition from the low-T to high-T phases in individual CsSnI 3 and FAPbI 3 nanowires. We reveal a large blueshift in the photoluminescence (PL) peak (~38 meV) at the low-T/high-T two-phase interface of partially transitioned FAPbI 3 wire, which may result from the lattice distortion at the phase boundary. Compared to the experimentally derived activation energy of CsSnI 3 (~1.93 eV), the activation energy of FAPbI 3 is relatively small (~0.84 eV), indicating a lower kinetic energy barrier when transitioning from a face-sharing octahedral configuration to a corner-sharing one. Further, the phase propagation rate in CsSnI 3 is observed to be relatively high, which may be attributed to a high concentration of Sn vacancies. Furthermore, our results could not only facilitate a deeper understanding of phase transition dynamics in halide perovskites with anisotropic crystal structures, but also enable controllable manipulation of optoelectronic properties via local phase engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tailoring Mechanical Properties of a Multi-Principle-Element Alloy by a Multi-Length-Scale Approach

A multiscale strengthening approach was employed to tailor the mechanical properties of a NiCoCr-based multi-principal element alloy (MPEA). Initially, the addition of Mo was utilized to strengthen the alloys by achieving grain size refinement, severe lattice distortion, and a reduction in stacking fault energy (SFE). Subsequently, the Suzuki segregation phenomenon was leveraged by carefully controlling stacking fault (SF) density via pre-straining and a subsequent 500°C heat treatment. Consequently, the Mo-added MPE alloys that were pre-strained and subsequently heat-treated exhibited a true yield stress of 2.3 GPa, with a corresponding fracture elongation of 12%. The Mo promotes complex SF interactions and the SFs formed during prior straining serve as sites for Suzuki segregation during subsequent heat treatment, varying the local SFE with Cr segregation, creating a roughened landscape and hindering dislocation dynamics. This multiscale strengthening approach presents a promising route for achieving desired mechanical properties in MPEAs.

mechanical properties↗
DOE OSTI2026

Machine Learning Vacancy Formation Energy in Nickel-Based Superalloys

Thermal vacancies play a critical role in high-temperature Ni-based superalloys and influence various properties such as creep resistance, oxidation, etc. This study systematically investigates the impact of commonly used transition metals (Cr, Co, Fe), refractory metals (Nb, Ta, Mo, W) and other elements (Al, Cu, Ti, Mn) on the thermodynamic stability of 36 binary, 20 ternary, 11 quaternary, 9 quinary, and 3 senary FCC Ni-based alloys covering various elemental combinations. Density functional theory-based studies on Ni-X binary alloys show that higher concentrations of Cr, Nb, Ta, Al, and Ti introduce significant lattice distortions and broaden the distribution of vacancy formation energies (standard deviation up to 0.15 eV). These elements partially donate electrons, reducing their self-consistent chemical potentials relative to single-element reference values and lowering vacancy formation energies, while Co, Fe, Mo, and W show lower charge localization. These trends extend from 3-6 element alloys, where Cr, Nb, and Ta-rich compositions have low-energy states (~0.5 eV) that increase vacancy concentrations. Finally, graph neural network models are developed to screen over 5000 virtual alloys. Eleven leading compositions are identified with mean vacancy formation energy higher than 1.75 eV and vacancy concentration ~2 orders of magnitude lower than pure Ni at 1000 K. These results provide valuable guidelines to achieve controlled defect engineering in structural alloys.

DFT↗
DOE OSTI2024

Enhancing Mechanical Properties of a Medium-Entropy Alloy by Regulating Mo Addition

Some multi-principal element alloys (MPEAs), including equiatomic, single-phase CrCoNi and CrCoFeMnNi are now widely recognized for their remarkable combinations of pronounced hardening rates, high ductility, and exceptional fracture toughness at room and cryogenic temperatures. To push the limit of hardenability of the medium-entropy alloy, the strategies associated with local lattice distortion or stacking fault energy (SFE) reduction that promote complex heterogeneity and defect dynamics require further investigation. The purposes of this study are to (1) further enhance the mechanical properties of a typical medium-entropy NiCoCr with alloying Mo, and (2) understand the strengthening mechanism of a Mo-added medium-entropy alloys.

Hung, Chang-Yu↗
DOE OSTI2025

Final report on assessment of molten salt corrosion testing of unirradiated and ion irradiated advanced manufactured high entropy alloys

Generation IV reactors and future fusion reactor designs have led to more demanding materials performance requirements due to their increased operating temperatures, corrosive coolants, and increased radiation doses compared to the current light-water reactor fleet. Among the innovative nuclear technologies under development, molten salt reactors stand out for their potential to offer superior fuel utilization, intrinsic safety characteristics, and economic viability. Of the proposed Generation IV designs, the gas fast reactor operates at 450 to 850°C and the molten salt reactor operates at 565 to 850°C, with the molten salt reactor design needing molten salt corrosion resistant materials [1, 2]. These increased temperatures and more extreme corrosion environments necessitate higher material performance, such as creep strength, radiation-tolerant microstructures, corrosion resistance, and high-temperature tensile properties. Hastelloy-N, a nickel-based alloy with additions of molybdenum and chromium, has been successfully employed to contain molten fluoride salt at temperatures up to 705°C. However, Hastelloy-N becomes embrittled upon neutron irradiation, primarily due to the accumulation of helium produced by (n,a) transmutation reactions. Furthermore, the corrosive nature of molten fluoride and chloride salts presents a formidable challenge, as these salts can react with and dissolve alloying elements such as Cr, Mo, and Fe, leading to selective leaching, loss of protective oxide layers, and accelerated degradation. High entropy alloys (HEAs) and refractory high entropy alloys (RHEAs) have emerged as a prominent area of interest, due to their ability to achieve tailored chemical compositions for specific applications. Unlike conventional alloys, HEAs are characterized by having multiple principal elements in equimolar or near equimolar ratios, leading to an unconventional alloying strategy [3]. This alloying strategy is believed to promote unique properties, such as single-phase stabilization of chemically compatible elements, lattice distortion effects due to atomic radius differences, and proposed sluggish diffusion effects. For extreme-environment applications, RHEAs have garnered much research interest because of the possibility of creating relatively ductile materials that can operate in extremely high-temperature environments, beyond the operating temperatures where other Ni-based superalloys begin to lose strength [4-6]. Idaho National Laboratory (INL) initiated a joint international effort with the Czech Republic to explore the feasibility of manufacturing HEAs for high-temperature nuclear applications using advanced manufacturing. This effort was funded at INL by the United States Department of Energy's Office of Nuclear Energy under the Advanced Reactor Technologies and Advanced Materials and Manufacturing Technologies (AMMT) Program. The HEAs were specifically designed for the corrosive and irradiation environments experienced in gas-cooled fast reactors, molten salt reactors, and fusion power. These alloys have been manufactured by multiple processes to determine the impact of manufacturing processes on the performance of the alloys in corrosive and irradiation environments. Preliminary molten salt corrosion testing showed that equimolar MoNbTiV and MoNbTi alloys exhibit exceptional performance, with arc-melted variants demonstrating only minimal degradation after 1000 hours of exposure to molten chloride salt at 700°C. Conversely, Nb2TiVZr2 showed significant molten salt corrosion susceptibility and microstructural instability during high-temperature molten salt exposures, and was, therefore deemed unfit for molten salt reactor applications. The MoNbTiV, MoNbTi, and Nb2TiVZr2 alloys were further evaluated through ion irradiation experiments conducted at the Michigan Ion Beam Laboratory at the University of Michigan. The microstructural stability and the evolution of irradiation-induced defects were characterized to assess the irradiation resistance of each of these alloys.

36 - MATERIALS SCIENCE↗