Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC COMPRESSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Inner Magnetospheric Physics

The inner magnetosphere extends from just above the topside ionosphere to approximately 8 RE geocentric distance. Magnetospheric physics is a young science that only started to be recognized as a region with the space observations by Explorer 1 in 1958. The region is mostly populated by ionized gas or plasma from Earth’s ionosphere. Plasma populations are differentiated by their energies primarily. From the least energetic to most are the plasmasphere, ring current, and radiation belts, extending from about 1 eV to 10 MeV in energy and from 1,000s cm-3 down to a few particles per cubic centimeter and less, respectively. The solar wind and solar erupted coronal mass ejections (CMEs) arriving and interacting with Earth’s magnetic field creates a dynamo effect that drives million ampere currents along magnetic field lines that close through the ionosphere. The solar wind dynamo also creates a 100s kV electric field across the magnetosphere that drives convective motion of the plasma within it. The solar wind driven currents compress Earth’s magnetic field on the sunward side and greatly extents the field on the nightside to form the magnetotail. The energy stored in the magnetotail is impulsively released when magnetic field lines there merge, releasing energy into the plasma trapped by the magnetic field. Those plasma become the ring current that loses plasma into the atmosphere to produce the aurora and at the same time ring current plasma can be further energized by wave-particle interactions to become the radiation belts. The presentation will review these topics and a few of the underlying physical processes that are involved in this highly coupled planetary system.

inner magnetosphere↗

Optimization of Isentropic Compression Loads on Current-Adder Pulsed Power Accelerator Architectures

The Thor pulsed power generator is being developed at Sandia National Laboratories. The design consists of up to 288 decoupled and transit time isolated capacitor-switch units, called “bricks”, that can be individually triggered to achieve a high degree of pulse tailoring for magnetically-driven isentropic compression experiments (ICE). The connecting transmission lines are impedance matched to the bricks, allowing the capacitor energy to be efficiently delivered to an ICE strip-line load with peak pressures of over 100 GPa. Thor will drive experiments to explore equation of state, material strength, and phase transition properties of a wide variety of materials. We present an optimization process for producing tailored current pulses, a requirement for many material studies, on the Thor generator. This technique, which is unique to the novel “current-adder” architecture used by Thor, entirely avoids the iterative use of complex circuit models to converge to the desired electrical pulse. We describe the optimization procedure for the Thor design and show results for various materials of interest. Also, we discuss the extension of these concepts to the megajoule-class Neptune machine design. Given this design, we are able to design shockless ramp-driven experiments in the 1 TPa range of material pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic fields and flows between 1 and 0.3 AU during the primary mission of Helios 1

Magnetic phenomena and coronal holes observed by Helios 1 during nearly four rotations of the sun are discussed. It is estimated that the magnetic field intensity of open field lines in some of the coronal holes (which changed in shape and latitude from one rotation to the next) was of the order of 10-20 G during the studied period, December 1974 to March 1975. Magnetic field polarity, cold magnetic enhancements, and longitudinal widths of the stream are described. It is concluded that between the sun and 0.3 AU there was a diverging stream surrounded by a thin boundary layer in which there was large velocity shear. There is evidence for compression of the magnetic field in the western boundary layer.

Burlaga, L. F.↗

Three-Dimensional Magnetohydrodynamic Modeling of the Solar Wind Including Pickup Protons and Turbulence Transport

To study the effects of interstellar pickup protons and turbulence on the structure and dynamics of the solar wind, we have developed a fully three-dimensional magnetohydrodynamic solar wind model that treats interstellar pickup protons as a separate fluid and incorporates the transport of turbulence and turbulent heating. The governing system of equations combines the mean-field equations for the solar wind plasma, magnetic field, and pickup protons and the turbulence transport equations for the turbulent energy, normalized cross-helicity, and correlation length. The model equations account for photoionization of interstellar hydrogen atoms and their charge exchange with solar wind protons, energy transfer from pickup protons to solar wind protons, and plasma heating by turbulent dissipation. Separate mass and energy equations are used for the solar wind and pickup protons, though a single momentum equation is employed under the assumption that the pickup protons are comoving with the solar wind protons.We compute the global structure of the solar wind plasma, magnetic field, and turbulence in the region from 0.3 to 100 AU for a source magnetic dipole on the Sun tilted by 0 deg - .90 deg and compare our results with Voyager 2 observations. The results computed with and without pickup protons are superposed to evaluate quantitatively the deceleration and heating effects of pickup protons, the overall compression of the magnetic field in the outer heliosphere caused by deceleration, and the weakening of corotating interaction regions by the thermal pressure of pickup protons.

Usmanov, Arcadi V.↗

An iterative forward analysis technique to determine the equation of state of dynamically compressed materials

Here, we developed an iterative forward analysis (IFA) technique with the ability to use hydrocode simulations as a fitting function for analysis of dynamic compression experiments. The IFA method optimizes over parameterized quantities in the hydrocode simulations, breaking the degeneracy of contributions to the measured material response. Velocity profiles from synthetic data generated using a hydrocode simulation are analyzed as a first-order validation of the technique. We also analyze multiple magnetically driven ramp compression experiments on copper and compare with more conventional techniques. Excellent agreement is obtained in both cases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Physics of Micro-Pinches

This project focused on using pulsed-power-driven techniques to study the coupling of high-energy-density (HED) magnetic fields to HED matter in the laboratory. Specifically, we studied a phenomenon known as "micro-pinching" to obtain HED conditions on a modest, university-scale pulsed-power driver: the 1-MA, 100-ns MAIZE linear transformer driver (LTD) facility at the University of Michigan. We used the "X-pinch" platform as a means of generating micro-pinch HED plasmas. An X-pinch is formed when two or more wires are crossed into the shape of an 'X' and a large electrical current is driven through the wires. This creates an intense electrical current density at the crossing point of the wires. Associated with this current density is an intense magnetic field and an intense magnetic field pressure. The magnetic field pressure compresses and heats the wire material into the HEDP regime. The use of an X-pinch platform ensures that the micro-pinch HED plasma will form in a well-controlled location, which helps with diagnostics alignment. This platform allowed us to explore the extreme plasma conditions and magnetic field pressures that can be generated with compact pulsed-power technology and intensely focused discharge currents. Understanding the limits of intensely focused discharge currents could have an enormous impact on HED science, especially when one considers the scaling of these platforms to the 30-MA Z facility at Sandia National Laboratories, where pressures well in excess of 1 Gbar could be achieved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Broadband Observations and Modeling of the Shell-Type Supernova Remnant G347.3-0.5

The supernova remnant G347.3-0.5 emits a featureless power law in X-rays, thought to indicate shock acceleration of electrons to high energies. We here produce a broadband spectrum of the bright northwest limb of this source by combining radio observations from the Australia Telescope Compact Array (ATCA), X-ray observations from the Advanced Satellite for Cosmology and Astrophysics (ASCA), and TeV gamma-ray observations from the CANGAROO imaging Cerenkov telescope. We assume that this emission is produced by an electron population generated by diffusive shock acceleration at the remnant forward shock. The nonlinear aspects of the particle acceleration force a connection between the widely different wavelength bands and between the electrons and the unseen ions, presumably accelerated simultaneously with the electrons. This allows us to infer the relativistic proton spectrum and estimate ambient parameters such as the supernova explosion energy, magnetic field, matter density in the emission region, and efficiency of the shock acceleration process. We find convincing evidence that the shock acceleration is efficient, placing greater than 25% of the shock kinetic energy flux into relativistic ions. Despite this high efficiency, the maximum electron and proton energies, while depending somewhat on assumptions for the compression of the magnetic field in the shock, are well below the observed 'knee' at 10(exp 15) eV in the Galactic cosmic-ray spectrum.

Ellison, Donald C.↗

Hypersonic Magneto-Fluid-Dynamic Compression in Cylindrical Inlet

Hypersonic magneto-fluid-dynamic interaction has been successfully performed as a virtual leading-edge strake and a virtual cowl of a cylindrical inlet. In a side-by-side experimental and computational study, the magnitude of the induced compression was found to be depended on configuration and electrode placement. To better understand the interacting phenomenon the present investigation is focused on a direct current discharge at the leading edge of a cylindrical inlet for which validating experimental data is available. The present computational result is obtained by solving the magneto-fluid-dynamics equations at the low magnetic Reynolds number limit and using a nonequilibrium weakly ionized gas model based on the drift-diffusion theory. The numerical simulation provides a detailed description of the intriguing physics. After validation with experimental measurements, the computed results further quantify the effectiveness of a magnet-fluid-dynamic compression for a hypersonic cylindrical inlet. At a minuscule power input to a direct current surface discharge of 8.14 watts per square centimeter of electrode area produces an additional compression of 6.7 percent for a constant cross-section cylindrical inlet.

Shang, Joseph S.↗

Observations of plasma depletion in the magnetosheath at the dayside magnetopause

In a set of 17 low- to mid-latitude crossings of the dayside and near-dayside magnetopause, Imp 6 plasma measurements show 11 cases of decreases in magnetosheath density just outside the boundary which are consistent with plasma depletion owing to magnetic flux tube compression as the field becomes draped against the magnetopause. Pressure anisotropies in the sense pressure perpendicular to the field direction greater than pressure parallel to it are a predicted result of the plasma depletion and field compression, and such anisotropies are observed. Application of the mirror instability criterion, which predicts growth of slow mode magnetoacoustic waves for values of the ratio between the cited pressures greater than a critical value, suggests that dayside magnetosheath plasma is usually unstable. One of the seventeen cases shows long-period waveforms in the 100-s density data that are 180 deg out of phase with simultaneous waveforms in the magnetic field strength. These data are interpreted as the signature of slow mode magnetoacoustic waves.

Crooker, N. U.↗

A catastrophe mechanism for coronal mass ejections

The ideal-MHD equations are used to show that a coronal current filament can suddenly lose equilibrium if its magnetic energy exceeds a critical value. The loss of equilibrium in the configuration results from an imbalance between magnetic tension and compression, and this imbalance ejects the filament upwards. Near the critical value, the equilibrium configuration develops a vertical current sheet attached to the photosphere at the point directly below the filament. When equilibrium is lost, field lines anchored to the photosphere are stretched upwards, and the current sheet rapidly grows longer. Without reconnection in the current sheet, the filament travels only a short distance before reaching a new equilibrium, and the net magnetic energy released is less than 1 percent of the stored magnetic energy. However, with reconnection, the filament travels upwards indefinitely, and all of the stored energy is released.

Forbes, T. G.↗

A magnetic particle time-of-flight (MagPTOF) diagnostic for measurements of shock and compression-bang time at the NIF [National Ignition Facility]

A magnetic particle time-of-flight (MagPTOF) diagnostic has been designed to measure shock- and compression-bang time using DHe-fusion protons and DD-fusion neutrons, respectively, at the National Ignition Facility (NIF). This capability, in combination with shock-burn weighted areal density measurements, will significantly constrain the modeling of the implosion dynamics. This design is an upgrade to the existing particle time-of-flight (pTOF) diagnostic, which records bang times using DD or DT neutrons with an accuracy better than ±70 ps [H. G. Rinderknecht et al., Rev. Sci. Instrum. 83, 10D902 (2012)]. The inclusion of a deflecting magnet will increase DHe-proton signal-to-background by a factor of 1000, allowing for the first time simultaneous measurements of shock and compression-bang times in DHe-filled surrogate implosions at the NIF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A constrained-transport embedded boundary method for compressible resistive magnetohydrodynamics

Motivated by the increased interest in pulsed-power magneto-inertial fusion devices in recent years, we present a method for implementing an arbitrarily shaped embedded boundary on a Cartesian mesh while solving the equations of compressible resistive magnetohydrodynamics. The method is built around a finite volume formulation of the equations in which a Riemann solver is used to compute fluxes on the faces between grid cells, and a face-centered constrained transport formulation of the induction equation. The small time step problem associated with the cut cells is avoided by always computing fluxes on the faces and edges of the Cartesian mesh. We extend the method to model a moving interface between two materials with different properties using a ghost-fluid approach, and show some preliminary results including shock-wave-driven and magnetically-driven dynamical compressions of magnetohydrostatic equilibria. In conclusion, we present a thorough verification of the method and show that it converges at second order in the absence of discontinuities, and at first order with a discontinuity in material properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Insight into magnetic, ferroelectric and elastic properties of strained BiFeO{sub 3} thin films through Mössbauer spectroscopy

We have studied the magnetic order of highly strained (001)-oriented BiFeO{sub 3} (BFO) thin films using {sup 57}Fe Conversion Electron Mössbauer Spectrometry. From 90 K to 620 K the films exhibit a collinear antiferromagnetic structure, in contrast with the cycloidal structure observed in bulk BFO. Moreover, we find that both the planar magnetic anisotropy for compressive strain and out-of-plane anisotropy for tensile strain persist from 90 K up to the Néel temperature (T{sub N}), which itself shows only a weak strain dependence. An analysis of the line asymmetry of the paramagnetic doublet for temperatures above T{sub N} is used to reveal the strain-dependent rotation of the polarization direction, consistent with previous observations. Our results show that the lattice dynamics in BFO films are strongly strain-dependent, offering avenues toward acoustic phonon devices. Finally, we use the versatility of Mössbauer spectroscopy technique to reveal various multi-property features including magnetic states, polarization direction and elastic strain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stability of perpendicular magnetohydrodynamic shocks in materials with ideal and nonideal equations of state

Magnetized target fusion approach to inertial confinement fusion involves the formation of strong shocks that travel along a magnetized plasma. Shocks, which play a dominant role in thermalizing the upstream kinetic energy generated in the implosion stage, are seldom free from perturbations, and they wrinkle in response to upstream or downstream disturbances. In Z-pinch experiments, significant plasma instability mitigation was observed with pre-embedded axial magnetic fields. To isolate effects, in this work we theoretically study the impact of perpendicular magnetic fields on the planar shock dynamics for different equations of state. For fast magnetosonic shocks in ideal gases, it was found that the magnetic field amplifies the intensity of the perturbations when $\gamma$ > 2 or it weakens them when $\gamma$ < 2. Weak shocks have been found to be stable regardless of the magnetic plasma intensity and gas compressibility; however, for sufficiently strong shocks the magnetic fields can promote a neutral stability/SAE at the shock if the adiabatic index is higher than 1 + $\sqrt{2}$. Finally, results have been validated with numerical simulations performed with the FLASH code.

36 MATERIALS SCIENCE↗

Biermann-Battery-Driven Magnetized Collisionless Shock Precursors in Laser-Produced Plasmas

This Letter reports the first complete observation of magnetized collisionless shock precursors formed through the compression of Biermann-battery magnetic fields in laser produced plasmas. At OMEGA, lasers produce a supersonic CH plasma flow which is magnetized with Biermann-battery magnetic fields. The plasma flow collides with an unmagnetized hydrogen gas jet plasma to create a magnetized shock precursor. The situation where the flowing plasma carries the magnetic field is similar to the Venusian bow shock. Imaging 2⁢𝜔 Thomson scattering confirms that the interaction is collisionless and shows density and temperature jumps. Proton radiographs have regions of strong deflections and FLASH magnetohydrodynamic (MHD) simulations show the presence of Biermann fields in the Thomson scattering region. Electrons are accelerated to energies of up to 100 keV in a power-law spectrum. Here, OSIRIS particle-in-cell (PIC) simulations, initialized with measured parameters, show the formation of a magnetized shock precursor and corroborate the experimental observables.

High-energy-density plasmas↗

Self-collimated electromagnetic jets from magnetized accretion disks - The even-symmetry case

This paper extends the previous treatment (Lovelace et al., 1987) of the origin of self-collimated EM jets to the case of even field symmetry, where the magnetic flux function Psi(r, z) is an even function of z. A viscous resistive accretion disk is assumed to surround a black hole with a force-free plasma outside of the disk. Inside the disk, the induction equation is solved for Psi(r, z) and the toroidal magnetic field. Outside the disk, previous results are used to study the formation of self-collimated EM jets. In contrast with the odd-symmetry case, for even symmetry the toroidal magnetic field acts to vertically compress the disk; a comparatively large toroidal magnetic field can exist inside the disk; and an appreciable fraction (possibly all) of the available accretion power can go into the jets.

Wang, J. C. L.↗

The magnetic field in the heliosheath

The interplanetary magnetic field (IMF) behaves in a reasonably well-understood manner between the Sun and the heliospheric termination shock. At the shock, the azimuthal field is amplified by a factor of four (for a strong shock) and undergoes secular amplification in the heliosheath until the flow is fully turned into the downstream direction and has reached its asymptotic state in the distant heliotail. This amplification may lead to important MHD effects that can cause the shock to be closer to the Sun than otherwise expected. Here we further examine whether there are important MHD effects in the heliosheath. We do this by calculating the kinematic compression of the magnetic field in the heliosheath using an analytic incompressible flow model of the dynamics downstream of the shock. We conclude that it is likely that MHD effects are important in the heliosheath in a narrow cone about the upstream direction.

Suess, S. T.↗

Magnetohydrodynamics using path or stream functions

Magnetization in highly conductive plasmas is ubiquitous to astronomical systems. Flows in such media can be described by three path functions Λ{sub α}, or, for a steady flow, by two stream functions λ{sub κ} and an additional field such as mass density ρ, velocity v, or travel time Δt. While typical analyses of a frozen magnetic field B are problem-specific and involve nonlocal gradients of the fluid element position x(t), we derive the general, local (in Λ or λ space) solution B=(∂x/∂Λ{sub α}){sub t} B-tilde {sub α}ρ/ ρ-tilde , where Lagrangian constants denoted by a tilde are directly fixed at a boundary hypersurface H-tilde on which B is known. For a steady flow, ρ-tilde B/ρ=(∂x/∂λ{sub κ}){sub Δt} B-tilde {sub κ}+v B-tilde {sub 3}/ v-tilde ; here the electric field E∼( B-tilde {sub 2}∇λ{sub 1}− B-tilde {sub 1}∇λ{sub 2})/ ρ-tilde depends only on λ{sub κ} and the boundary conditions. Illustrative special cases include compressible axisymmetric flows and incompressible flows around a sphere, showing that viscosity and compressibility enhance the magnetization and lead to thicker boundary layers. Our method is especially useful for directly computing electric fields, and for addressing upstream magnetic fields that vary in spacetime. We thus estimate the electric fields above heliospheres and magnetospheres, compute the draping of magnetic substructure around a planetary body, and demonstrate the resulting inverse polarity reversal layer. Our analysis can be immediately incorporated into existing hydrodynamic codes that are based on stream or path functions, to passively evolve the electromagnetic fields in a simulated flow. Furthermore, in such a prescription the electromagnetic fields are frozen onto the grid, so it may be developed into a fully magnetohydrodynamic, efficient simulation.

79 ASTRONOMY AND ASTROPHYSICS↗