Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETORESISTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Structure and giant magnetoresistance of granular Co-Cu nanolayers prepared by cross-beam pulsed laser deposition

A series of Co{sub x}Cu{sub 100-x} (x=0, 40-75, 100) layers with thicknesses between 13 and 55 nm were prepared on silicon substrates using cross-beam pulsed laser deposition. Wide-angle x-ray diffraction (WAXRD), transmission electron microscopy (TEM), and electrical transport measurements revealed a structure consisting of decomposed cobalt and copper grains with grain sizes of about 10 nm. The influence of cobalt content and layer thickness on the grain size is discussed. Electron diffraction indicates the presence of an intermetallic Co-Cu phase of Cu{sub 3}Au structure type. Thermal treatment at temperatures between 525 and 750 K results in the progressive decomposition of Co and Cu, with an increase of the grain sizes up to about 100 nm. This is tunable by controlling the temperature and duration of the anneal, and is directly observable in WAXRD patterns and TEM images. A careful analysis of grain size and the coherence length of the radiation used allows for an accurate interpretation of the x-ray diffraction patterns, by taking into account coherent and noncoherent scattering. The alloy films show a giant magnetoresistance of 1%-2.3% with the maximum obtained after annealing at around 725 K.

36 MATERIALS SCIENCE↗

Microstructural Characterisation of Giant Magnetoresistive Co/Cu Multilayers

Antiferromagnetically-coupled Co/Cu multilayers prepared by magnetron sputtering exhibit pronounced giant magnetoresistance (GMR) effect at room temperature. Using both diffraction and imaging techniques, we studied the in-plane and out-of-plane crystallographic and layering microstructural features of these multilayers. Dominant characteristic features associated with the multilayers, such as lateral and vertical columnar grain orientations as well as layer undulations and regularity, were identified. By deliberately introducing microstructural changes to the materials system using buffer layer and heat treatment, detailed microstructural analysis have provided an insight into the dependence of GMR on microstructures of the multilayers.

36 MATERIALS SCIENCE↗

Electrical transport properties and magnetoresistance of polycrystalline Fe{sub 3}O{sub 4}/p-Si heterostructures

Polycrystalline Fe{sub 3}O{sub 4} films were deposited on the p-Si wafers using reactive sputtering to form the polycrystalline Fe{sub 3}O{sub 4}/p-Si heterostructures. A rectifying behavior was observed in the polycrystalline Fe{sub 3}O{sub 4}/p-Si heterostructures due to the formation of p-n junction between Fe{sub 3}O{sub 4} and p-Si. The metal-insulator transition was observed, and the transition temperature decreases from 250 K at 100 mA to 110 K at 1 mA in the reverse range, but it keeps at 100 K in the forward range. The current-dependent magnetoresistance (MR) crossovers from negative to positive with different manners for the forward and reverse currents. The characteristic MR is thought to be caused by the rectifying effect and band structure of the Fe{sub 3}O{sub 4} near the interface of the heterostructures.

36 MATERIALS SCIENCE↗

In situ magnetoresistance measurements of ion-beam-etched Fe-Co thin films

The effect of ion-beam (IB) irradiation on magnetic softness in Fe-Co thin films was evaluated by means of in situ magnetoresistance (MR) measurements. A 25 nm Fe{sub 70}Co{sub 30} film was etched by Ar IB, and successive MR measurements were performed in the same IB etching chamber. Since the IB etching and MR measurements were performed alternately in vacuum, it was possible to evaluate the etching effect on magnetic softness of the single sample without any capping layer interaction. We name the thickness below which the magnetic softness of the etched film starts to decrease as the critical thickness (T{sub cr}). The T{sub cr} was found to be affected by IB energy: 150 and 250 V IB, respectively, showed 7.5 and 10 nm smaller T{sub cr} than that of 600 V IB. Structural analysis revealed the 600 V IB introduced a larger deterioration in the film crystallinity than with the 250 V IB.

36 MATERIALS SCIENCE↗

Role of Coulomb blockade and spin-flip scattering in tunneling magnetoresistance of FeCo-Si-O nanogranular films

In this work, we report the effect of FeCo atomic fraction (0.33 < x < 0.54) and temperature on the electrical, magnetic, and tunneling magnetoresistance (TMR) properties of FeCo-Si-O granular films prepared by atom beam sputtering technique. Glancing angle x-ray diffraction and TEM studies reveal that films are amorphous in nature. The dipole-dipole interactions (particle-matrix mixing) is evident from zero-field cooled and field-cooled magnetic susceptibility measurements and the presence of oxides (mainly Fe-related) is observed by x-ray photoelectron spectroscopy analysis. The presence of Fe-oxides is responsible for the observed reduction of saturation magnetization and rapid increase in coercivity below 50 K. TMR has been observed in a wide temperature range, and a maximum TMR of -4.25% at 300 K is observed for x = 0.39 at a maximum applied field of 60 kOe. The fast decay of maximum TMR at high temperatures and lower TMR values at 300 K when compared to P{sub FeCo}{sup 2}/(1+P{sub FeCo}{sup 2}), where P{sub FeCo} is the spin polarization of FeCo are in accordance with a theoretical model that includes spin-flip scattering processes. The temperature dependent study of TMR effect reveals a remarkably enhanced TMR at low temperatures. The TMR value varies from -2.1% at 300 K to -14.5% at 5 K for x = 0.54 and a large MR value of -18.5% at 5 K for x = 0.39 is explained on the basis of theoretical models involving Coulomb blockade effects. Qualitatively particle-matrix mixing and the presence of Fe-oxides seems to be the source of spin-flip scattering, responsible for fast decay of TMR at high temperatures. A combination of higher order tunneling (in Coulomb blockade regime) and spin-flip scattering (high temperature regime) explains the temperature dependent TMR of these films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Toward a system to measure action potential on mice brain slices with local magnetoresistive probes

This work combines an electrophysiological system with a magnetoresistive chip to measure the magnetic field created by the synaptic/action potential currents. The chip, with 15 spin valve sensors, was designed to be integrated in a recording chamber for submerged mice brain slices used for synaptic potential measurements. Under stimulation (rectangular pulses of 0.1 ms every 10 s) through a concentric electrode placed near the CA3/CA1 border of the hippocampus, the spin valve sensor readout signals with 20 {mu}V amplitude and a pulse length of 20 to 30 ms were recorded only in the pyramidal cell bodies region and can be interpreted as being derived from action potentials/currents.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of the magnetoresistance of magnetic film modified by using ion beams

We have studied the magnetoresistance (MR) of locally modified Cu(20 nm)/AlO{sub x}(1 nm)/NiFe(20 nm)/AlO{sub x}(1 nm)/Cu(3 nm) on a Si substrate. The local modification was performed by irradiating Cu ion beams on a photoresist wire-covered film. After irradiation, the hysteresis loop shows step-like behavior at a specific ion dose, which is caused by the difference in the switching fields of the irradiated and unirradiated region of the film. Because of this, plateau-like behavior is observed in the transverse MR measurement of the film with 1 x 10{sup 16} ions/cm{sup 2}. A cross-sectional transmission electron microscopy image shows the irradiation induced intermixing of the magnetic layer with nonmagnetic layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved tunneling magnetoresistance at low temperature in manganite junctions grown by molecular beam epitaxy

We report resistance versus magnetic field measurements for a La{sub 0.65}Sr{sub 0.35}MnO{sub 3}/SrTiO{sub 3}/La{sub 0.65}Sr{sub 0.35}MnO{sub 3} tunnel junction grown by molecular-beam epitaxy, that show a large field window of extremely high tunneling magnetoresistance (TMR) at low temperature. Scanning the in-plane applied field orientation through 360 deg., the TMR shows fourfold symmetry, i.e., biaxial anisotropy, aligned with the crystalline axis but not the junction geometrical long axis. The TMR reaches {approx}1900% at 4 K, corresponding to an interfacial spin polarization of >95% assuming identical interfaces. These results show that uniaxial anisotropy is not necessary for large TMR, and lay the groundwork for future improvements in TMR in manganite junctions.

36 MATERIALS SCIENCE↗

From positive to negative magnetoresistance in graphene with increasing disorder

Artificial disorder was introduced gradually into monolayer graphene by controlling Ga{sup +} ion irradiation and the corresponding electronic transport properties regulated by gate voltage, source-drain voltage, temperature, and magnetic field were studied experimentally. An unsaturated positive magnetoresistance (MR) up to 100% at {approx}5 T was observed in as-fabricated graphene, while there is significant negative MR in disordered graphene. This phenomenon was attributed to the monocrystalline breaking and crystallite-boundary scattering in disordered graphene.

36 MATERIALS SCIENCE↗

Enhanced magnetoresistance in naturally oxidized MgO-based magnetic tunnel junctions with ferromagnetic CoFe/CoFeB bilayers.

Three-dimensional elemental distributions in magnetic tunnel junctions containing naturally oxidized MgO tunnel barriers are characterized using atom-probe tomography. Replacing the CoFeB free layer (reference layer) with a CoFe/CoFeB (CoFeB/CoFe) bilayer increases the magnetoresistance from 105% to 192% and decreases the resistance-area product from 14.5 to 3.4 {Omega} {micro}m{sup 2}. The CoFe/CoFeB bilayer improves the compositional uniformity within the free layer by nucleating CoFeB crystals across the entire layer, resulting in a homogeneous barrier/free layer interface. In contrast, the simple CoFeB free layer partially crystallizes with composition differences from grain to grain (5-30 nm), degrading the tunnel junction performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Huge Anisotropic Magnetoresistance In Epitaxial Sm{sub 0.53}Sr{sub 0.47}MnO{sub 3} Thin Films

In the present work we have studied the variation of LFMR as a function of the angle ({theta}) between the applied magnetic field and the plane of the film. DC magnetron sputtering was used for film preparation on LSAT single crystal substrates from Sm{sub 0.55}Sr{sub 0.45}MnO{sub 3} targets synthesized by the solid state reaction route. X-ray diffraction confirmed the epitaxial nature of these films. These films have simultaneous ferromagnetic and metal insulator transition at {approx}91 K. These films exhibit enhanced low field colossal magnetoresistance {approx}99% at 3.6 kOe at 80 K. Huge anisotropy is observed in the MR, which decreases from {approx}80% to 6% as {theta} increases from 0 to 90 deg. The evolution of the resistance as a function of time and the magnetic field at a constant temperature (T{approx_equal}77 K) has also been studied.

36 MATERIALS SCIENCE↗

Fe/Au Multilayers: Structure and Magnetoresistance

We have measured the magnetoresistance (MR) in two sets of Fe/Au multilayers, with varying (1) Fe layer thickness, t{sub Fe} = 3-10 nm, and (2) Au layer thickness t{sub Au} = 5-15 nm, grown on Si substrates by sputtering. The multilayer interface structure and magnetic properties were studied by polarized neutron reflectometry (PNR). The study was undertaken to understand the correlation between structure of these multilayers and their magneto-transport properties.

36 MATERIALS SCIENCE↗

Effects of boron composition on tunneling magnetoresistance ratio and microstructure of CoFeB/MgO/CoFeB pseudo-spin-valve magnetic tunnel junctions

The effect of B concentration on the tunneling magnetoresistance (TMR) of (Co{sub 25}Fe{sub 75}){sub 100-x}B{sub x}/MgO/(Co{sub 25}Fe{sub 75}){sub 100-x}B{sub x} (x = 22 and 33) pseudo-spin-valve (P-SV) magnetic tunnel junctions (MTJs) was investigated. The TMR ratios for optimally annealed MTJs with x = 22 and 33 were 340% and 170%, respectively, at room temperature. High resolution transmission electron microscopy (HRTEM) observation showed a weaker (001) texture in the MgO barrier in the MTJ with x = 33. The bottom electrode was not fully crystallized even with a considerable amount of B in the (Co{sub 25}Fe{sub 75}){sub 67}B{sub 33}, while good epitaxy was observed between (001) textured MgO and (Co{sub 25}Fe{sub 75}){sub 78}B{sub 22} electrodes.

36 MATERIALS SCIENCE↗

Preparation of Co{sub 2}FeSn Heusler alloy films and magnetoresistance of Fe/MgO/Co{sub 2}FeSn magnetic tunnel junctions

To obtain magnetic tunnel junctions (MTJs) composed of non-equilibrium alloy, Co{sub 2}FeSn films were prepared by atomically controlled alternate deposition at various substrate temperatures. X-ray diffraction patterns and Moessbauer spectra clarify that Co{sub 2}FeSn films in the Heusler alloy phase can be realized by growing at a substrate temperature of 250 deg. C or below. Phase separation into cubic CoSn, hexagonal CoSn and cubic CoFe phases occurs in films grown at substrate temperatures 300 deg. C or greater. Fe/MgO/Co{sub 2}FeSn MTJs were prepared with the Co{sub 2}FeSn layer grown at various substrate temperatures. The MTJs with the ferromagnetic Co{sub 2}FeSn layer grown at a substrate temperature of 250 deg. C showed tunnel magnetoresistance ratios of 72.2% and 43.5% at 2 K and 300 K, respectively.

36 MATERIALS SCIENCE↗

Room temperature magnetoresistance in CoFeB/SrTiO{sub 3}/CoFeB magnetic tunnel junctions deposited by ion beam sputtering

Room temperature transport properties are reported in polycrystalline SrTiO{sub 3}-based magnetic tunnel junctions deposited by ion beam sputtering. The junctions comprise CoFeB electrodes and the SrTiO{sub 3} barrier with thickness varied between 0.9 and 1.9 nm. Resistance area product values between 3 {Omega}.{mu}m{sup 2} and 22 k{Omega}.{mu}m{sup 2} have been measured with a tunnel magnetoresistance ratio ranging from 3.1 to 13% at room temperature. At low barrier thickness (1.2 nm), ferromagnetic coupling between electrodes is observed, indicating the presence of defects in the structure. A post-oxidation step was found to improve transport properties at lower barrier thickness.

36 MATERIALS SCIENCE↗

Chemical diffusion: Another factor affecting the magnetoresistance ratio in Ta/CoFeB/MgO/CoFeB/Ta magnetic tunnel junction

This letter investigates the microstructure and mean inner potential (MIP) profile of Ta/CoFeB/MgO/CoFeB/Ta magnetic tunnel junctions (MTJs) by high resolution transmission electron microscopy (HRTEM) and electron holography, respectively. The inconspicuous crystallization of MgO barrier is confirmed by HRTEM in the post-annealed sample at 250 Degree-Sign C. An obvious MIP difference is displayed in the Ta layers between the top and bottom of the MTJ, and elemental content difference of them is confirmed by energy dispersive spectroscopy. These results imply that the chemical diffusion can also give rise to a lower tunnel magnetoresistance ratio besides the inconspicuous crystallization of MgO barrier.

36 MATERIALS SCIENCE↗

Enhancement of magnetoresistance using CoFe/Ru/CoFe synthetic ferrimagnetic pinned layer in BiFeO{sub 3} based spin-valves

SrTiO{sub 3} (100) sub/BiFeO{sub 3}/CoFe/Ru/CoFe/Cu/CoFe/Ta structure was prepared by a combination of chemical solution deposition and sputtering method, and followed by a systematical investigation for the structural, magnetic and magnetoresistance properties at room temperature (RT) as a function of CoFe and Ru thicknesses. It was revealed that introduction of synthetic CoFe/Ru/CoFe as a pinning layer increased the giant magentoresistance (MR) ratio to 8.3% at RT. This enhancement of MR ratio might be attributed to (i) the increase of pinning field, and (ii) suppression of the influence of the surface roughness of BiFeO{sub 3} by inserting the synthetic CoFe/Ru/CoFe layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spatially resolving variations in giant magnetoresistance, undetectable with four-point probe measurements, using infrared microspectroscopy

Magnetorefractive infrared (IR) microspectroscopy is demonstrated to resolve spatial variations in giant magnetoresistance (GMR) and, by modelling, provide an insight into the origin of the variations. Spatial variations are shown to be masked in conventional four-point probe electrical or IR spectral measurements. IR microspectroscopy was performed at the SMIS beamline at the SOLEIL synchrotron, modified to enable measurements in magnetic fields. A GMR gradient was induced in a CoFe/Cu multilayer sample by annealing in a temperature gradient. Modelling revealed that variations in GMR at 900 Oe could be attributed to local variations in interlayer coupling locally changing the switching field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗