Search NASA⌕ Search

SEARCH · Search NASA

Results for “Method development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Exabiome: Advancing Microbial Science through Exascale Computing

The Exabiome project seeks to improve the understanding of microbiomes through the development of methods for accelerating metagenomic science using exascale computing. This article gives an overview of scientific impact of the three components of the project: metagenome assembly, protein family detection, and comparative analysis of metagenomes. Exabiome developed MetaHipMer, the only metagenome assembler capable of scaling to full exascale systems. MetaHipMer has enabled ground-breaking assemblies on the Frontier supercomputer, with many scientific benefits, such as the discovery of rare species and viral genomes. To investigate protein families, Exabiome developed two exascale tools, PASTIS and HipMCL. Together, these can utilize exascale resources to understand the functional diversity of billions of dark matter proteins and novel protein families. For comparative analysis, Exabiome developed kmerprof, a tool that can be used to compare huge metagenomes for many different scientific purposes, for example, grouping human microbiomes according to body location.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Advances in Molecular Beam Epitaxy Growth of Ultra-Wide Bandgap Ga2O3 Based Alloys

Gallium oxide (Ga2O3) is an emerging ultra-wide bandgap semiconductor material that has attracted attention for its potential to outperform existing SiC and GaN based devices operating at high breakdown voltages and high temperature. Isovalent alloying of In and Al in Ga2O3 provides the ability to engineer bandgap energy and strain of the material. Alloying with Al increases the bandgap energy and the theoretically achievable Baliga's figure of merit, a key measure of a material's ultimate performance limits for high power switching devices. Alloying with In introduces compressive strain and can be used to counteract the tensile strain of Al incorporation. The resulting (AlxGa1-x-yIny)2O3 alloy can be lattice-matched to commercially available Ga2O3 wafers and has a tunable bandgap energy greater than that of Ga2O3, 4.76 eV. Such lattice-matched material can be grown arbitrarily thick without the detrimental effects of elastic strain and relaxation, making it suitable for high voltage diodes and transistors. However, efforts to synthesize isovalent alloys are complicated by their tendency to phase separate into corundum Al2O3 or bixbyite In2O3. Literature reports of the quaternary (AlxGa1-x-yIny)2O3 are limited to <1% unintentional indium incorporation in In-catalyzed (AlxGa1-x)2O3. The primary limitation to quaternary growth is the limited incorporation of indium at elevated growth temperatures. This limited incorporation is due to both the volatility of indium oxide and Al and Ga cation exchange reactions which replace indium in In2O3. We report on the development of a novel high-throughput molecular beam epitaxy (MBE) technique to screen the growth conditions for the ternary alloy (InyGa1-y)2O3, and the application of these findings to the first successful synthesis of phase pure monoclinic (AlxGa1-x-yIny)2O3 by MBE. By leveraging the unique sub-oxide chemistry of Ga2O3 and in-situ monitoring of crystal properties by reflection high-energy electron diffraction (RHEED), a cyclical growth and etch-back method is developed and applied to rapidly characterize the (InyGa1-y)2O3 growth space. This cyclical method provides approximately 10x increase in experimental throughput and up to 46x improvement in Ga2O3 substrate utilization. Appropriate growth conditions for monoclinic (InyGa1- y)2O3 are identified by machine learning analysis of RHEED patterns and targeted growths are characterized ex-situ to confirm improved In incorporation. These growth conditions are then combined with established (AlxGa1-x)2O3 growth conditions to grow quaternary (AlxGa1-x-yIny)2O3 with Al mole fractions ranging from 1.4% - 24.4% and In mole fractions ranging from 3.1% to 15.5%. The chemical and optical properties of the alloys are investigated by XRD, XPS, and spectroscopic ellipsometry. A lattice-matched (AlxGa1-x-yIny)2O3 alloy is examined by 4D-STEM and the chemical and physical uniformity of Al and In incorporation are discussed.

alloy↗
DOE OSTI2024

A performant energy-conserving particle reweighting method for Particle-in-Cell simulations

A new particle-based reweighting method is developed and demonstrated in the Aleph Particle-in-Cell with Direct Simulation Monte Carlo (PIC-DSMC) program. Novel splitting and merging algorithms ensure that modified particles maintain physically consistent positions and velocities. This method allows a single reweighting simulation to efficiently model plasma evolution over orders of magnitude variation in density, while accurately preserving energy distribution functions (EDFs). Demonstrations on electrostatic sheath and collisional rate dynamics show that reweighting simulations achieve accuracy comparable to fixed weight simulations with substantial computational time savings. This highly performant reweighting method is recommended for modeling plasma applications that require accurate resolution of EDFs or exhibit significant density variations in time or space.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Operating Klystrons at the Spallation Neutron Source – Two Decades of Perspective

Klystron amplifiers have been operated at the Spallation Neutron Source (SNS) in support of the user program since 2006. SNS tubes have amassed over 100,000 hours of high-voltage and filament-on time providing a significant source of operational statistics for high power, high-duty klystrons. Additionally, the SNS Radiofrequency (RF) Systems Group has developed operational methods to mitigate specific reliability challenges, such as cathode arcing and output power instability. Despite much progress, many of these challenges persist, prompting the SNS to update the procedures used for klystron processing as well as develop a higher throughput test stand.

Moss, John [ORNL] (ORCID:0009000085988916)↗
DOE OSTI2025

Aqueous-Based Granulation Method Towards Syngas Production

An aqueous-based granulation method is developed to combat the structural changes associated with binder-based granulation techniques. Microwave-assisted methane reforming studies showed an improved catalyst efficiency for these aqueous-based granules compared to the powder catalysts. This granulation method has been extended to other practical applications (chemical looping gasification and air separations).

aqueous-based granulation↗
DOE OSTI2025

Leveraging large language models to automate the identification of healthcare access barriers for veterans

Objective: To develop and evaluate an automated system for identifying healthcare barriers focusing on transportation issues in veterans’ clinical notes using large language models (LLMs) and to assess the impact of different prompting strategies on classification performance and explanation consistency. Methods: We developed a hybrid system combining pattern matching for templated notes with LLM analysis for free-text notes. Using 2000 manually annotated clinical notes, we compared four prompting strategies (dual-role short, dual-role long, analysis-first, analysis-only) across Mistral-7B and Llama-3.1 models. We evaluated classification performance using standard metrics and assessed explanation consistency through embedding similarity analysis. Results: The analysis-first strategy achieved superior performance, with Mistral-7B reaching an F1 score of 0.914, outperforming traditional machine learning approaches (GBM: 0.786, BERT: 0.811). LLMs demonstrated higher explanation consistency within models (mean cosine similarity 0.887–0.908) compared to cross-model similarities (0.767–0.872). Pattern matching successfully handled 6.7% of templated notes deterministically. Mistral-7B showed greater internal consistency but higher abstention rates compared to Llama-3.1. Conclusion: Requiring LLMs to analyze evidence before classification improves both accuracy and explanation consistency for identifying transportation barriers in clinical notes. This approach enables automated barrier detection at scale while providing clinically relevant explanations, supporting both population-level healthcare planning and individual patient care decisions.

Healthcare access barriers↗
DOE OSTI2025

Improved Guarantees for Optimal Nash Equilibrium Seeking and Bilevel Variational Inequalities

We consider a class of hierarchical variational inequality (VI) problems that subsumes VI-constrained optimization and several other problem classes, including the optimal solution selection problem and the optimal Nash equilibrium (NE) seeking problem. Our main contribution is threefold. (i) We consider bilevel VIs with monotone and Lipschitz continuous mappings and devise a single-timescale iteratively regularized extragradient method, named IR-EG 𝚖,𝚖 . We improve the existing iteration complexity results for addressing both bilevel VI and VI-constrained convex optimization problems. (ii) Under the strong monotonicity of the outer-level mapping, we develop a method named IR-EG 𝚜,𝚖 and derive faster guarantees than those in (i). We also study the iteration complexity of this method under a constant regularization parameter. These results appear to be new for both bilevel VIs and VI-constrained optimization. (iii) To our knowledge, complexity guarantees for computing the optimal NE in nonconvex settings do not exist. Motivated by this lacuna, we consider VI-constrained nonconvex optimization problems and devise an inexactly projected gradient method, named IPR-EG, where the projection onto the unknown set of equilibria is performed using IR-EG 𝚜,𝚖 with a prescribed termination criterion and an adaptive regularization parameter. We obtain new complexity guarantees in terms of a residual map and an infeasibility metric for computing a stationary point. Here, we validate the theoretical findings using preliminary numerical experiments for computing the best and the worst NEs.

bilevel optimization↗
DOE OSTI2024

Simulation of a scintillator-based fast ion loss detector for steady-state operation in Wendelstein 7-X (invited)

A quantitative theoretical framework has been created to model neutral beam injection and fast ion losses in the Wendelstein 7-X (W7-X) stellarator, including a novel method to develop synthetic diagnostics for fast ion loss detectors (FILDs) of many types, such as scintillating and Faraday Cup FILDs. This is the first time that this has been done in stellarator geometry with this level of fidelity, providing a way for fast ion losses to be predicted more precisely in future stellarator experiments and in W7-X. Simulations of the signal seen by a Faraday Cup FILD have been completed for multiple W7-X plasmas and show close agreement with the measured signals. This method is now applied to an actively water-cooled, scintillator-based FILD, which is currently in development to measure the fast ion loss distribution in W7-X in greater detail. The design makes use of a double slit to measure energy-and-pitch-angle-resolved losses of both co-going and counter-going fast ions. The diagnostic, which can be inserted to different radial positions, has been designed to withstand steady-state heat fluxes of up to 120 kW/m 2 along with additional transient heat loads of 100 kW/m 2 lasting for up to 20 s at a time. Simulations of W7-X standard magnetic configuration show up to 8 × 10 13 (s –1 cm –2 ) ion fluxes onto the sensor from each neutral beam source and no signal from the counter-going slit. Finally, these simulations will help inform experimental proposals for future W7-X campaigns after installation of this diagnostic.

3D printing↗
DOE OSTI2025

Zavitsas’ hydration model for electrolytes only stable in the presence of another: NaAl(OH) 4 in aqueous NaOH solution

Many aqueous electrolytes are only stable in the presence of another electrolyte, such as electrolytes that are only soluble in strong acid or base. An example is sodium aluminate [NaAl(OH) 4 ], which is only stable in aqueous NaOH. This complicates developing thermodynamic parameters because it is difficult to separate the contributions of individual electrolytes in multicomponent solutions to measured bulk thermodynamic properties. The present study develops a method to determine the liquid phase parameters from solubility data for Zavitsas’ Hydration model, a model that incorporates hydration parameters into the activities of dissolved species. Furthermore, this study uses gibbsite [Al(OH) 3 ] solubility data in aqueous NaOH solution to develop Zavitsas' model parameters for NaAl(OH) 4 simultaneously with the equilibrium constants. A good fit of the solubility data was found, showing that Zavitsas’ model is effective for this system.

Bayer process↗
DOE OSTI2026

Seismic Elastic Double-Beam Characterization of Faults and Fractures for CO₂ Storage Site Selection

Site characterization for underground injection and storage of gigatonne-scale CO₂ requires reliable and cost-effective methods to detect and characterize faults and fractures and to assess their stress state and fault activation potential. This is critical, as wastewater injection and disposal have been shown to activate faults and induce earthquakes, and CO₂ leakage remains a key concern for long-term storage. In this project, we developed seismic methods to detect and characterize large-scale sedimentary and crystalline basement faults and associated small-scale fractures below conventional seismic imaging resolution using multicomponent (9C) surface seismic data. Machine learning was used to automatically interpret large-scale faults, providing key information for estimating the maximum magnitude of potential induced earthquakes. High-fidelity imaging was achieved by exploiting redundancy across multiple elastic wave modes, where independent images from different modes and frequencies cross-validate each other. We also used our nonlinear signal comparison (NLSC) method for ground roll removal, improving data quality in complex near-surface conditions. The methods were validated using field data acquired in central Montana. Results show that basement faults extend into the sedimentary section and that small-scale fractures are widespread above the basement. The inferred stress orientation is consistent with regional stress data, and the estimated maximum induced earthquake magnitude is small (Mw ~2.3). The developed workflow provides a practical approach for fault and fracture characterization and for assessing induced seismicity and leakage risk. It is directly applicable to CO₂ storage site selection and to other subsurface systems.

02 PETROLEUM↗
DOE OSTI2024

Dynamic data-driven multiscale modeling for predicting the degradation of a 316L stainless steel nuclear cladding material

Here, we have developed a long short-term memory stacked ensemble (LSTM-SE) surrogate modeling approach that can provide rapid predictions of microstructural evolution and the resultant mechanical properties of American Iron and Steel Institute (AISI) 316L series stainless steel (316LSS) fuel cladding under conditions of varying temperature and radiation dose rate. To acquire training data, we developed and implemented a kinetic Monte Carlo (KMC) model to simulate precipitation kinetics of M 23 C 6 , γ', and G phases within SS316L cladding. Experimentally reported precipitation kinetics of SS316L in literature were linked to the kinetic parameters of the simulated precipitation in our KMC model. The model was then used to simulate microstructure evolution under synthetically generated treatments of varying temperature and radiation dose rate, for periods of up to 3000 hours. Changes in volume fraction, number density, and particle size of precipitates were recorded, and particle area fractions were correlated using statistical methods to develop the surrogate model. Simultaneously, the mechanical properties of the simulated microstructures were evaluated using microstructure-based finite element method (FEM) analysis to determine the elastic modulus, yield stress, ultimate tensile strength, and elongation to failure of the aged microstructures. Using this approach, our surrogate model can predict precipitation behavior within 0.25% volume fraction and mechanical properties within 6% relative error from the values predicted by the KMC and FEM models using 50 training simulations as input. The trained recurrent neural network-based model can return estimations of precipitation kinetics and mechanical properties ~1000 times faster than the physics-based codes. This work demonstrates, as a proof of concept, that reactor material service lifetimes under variable service conditions can be predicted for a statistics-based model from a practicably obtainable dataset.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Optimization and Evaluation of Energy Savings for Connected and Autonomous Off-Road Vehicles

Off-road vehicles, such as wheel loaders, excavators, and harvesters, are extensively utilized across a wide range of industries, including construction, agriculture, and mining. These machines have become indispensable in supporting the day-to-day operational needs of a nation, playing a critical role in various sectors' infrastructure and productivity. However, despite their utility, off-road vehicles are significant consumers of fossil fuels, resulting in substantial emissions that contribute to environmental degradation. This highlights the pressing need for research and technological advancements aimed at improving their energy efficiency and reducing their carbon footprint. There are, however, two primary challenges that must be addressed to achieve these goals. First, off-road vehicles typically perform both driving and working tasks simultaneously, which introduces a high level of complexity into their overall dynamic systems. Analysis the interactions between these functions is challenging. Second, research into off-road vehicles is inherently interdisciplinary, demanding expertise across several domains such as fluid power systems, vehicle dynamics, control theory, optimization techniques, and real-world implementation. Recognizing these challenges, we proposed the project titled "Optimization and Evaluation of Energy Savings for Connected and Autonomous Off-Road Vehicles" as a comprehensive solution to enhance fuel efficiency while simultaneously improving productivity. This project specifically focuses on autonomous off-road vehicles, with particular attention to wheel loaders, and seeks to develop novel methods to optimize energy consumption without sacrificing operational performance. The project integrates real-time control algorithms, vehicle dynamics modeling, and co-optimization of powertrain system and vehicle system to achieve these goals. Our optimization strategy dynamically co-optimizes critical parameters at both the powertrain and vehicle levels, including vehicle speed, working tool movements, powertrain dynamics, and engine operations in real-time. To streamline this optimization process, we developed a vehicle model that captures the key dynamics while significantly enhancing computational efficiency. This allows the system to intelligently minimize fuel consumption, all while maintaining or even improving productivity through real-time calculations during various off-road operations. To validate the effectiveness of this energy optimization method, we introduced a state-of-the-art Hardware-in-the-Loop (HIL) testbed. This reconfigurable testbed seamlessly integrates the actual engine with virtual models of the wheel loader's subsystems, allowing for accurate emulation of real-world operational loads and environments. By simulating these conditions, the HIL testbed enables us to evaluate the wheel loader’s performance under diverse working scenarios, ensuring the developed solution is applicable in real-world operations. This testbed proved to be instrumental in validating the optimization algorithms and demonstrating the system's practical effectiveness. During the evaluation and testing phase, we employed the HIL testbed to rigorously assess the energy savings and productivity improvements generated by the optimized system. The results were highly encouraging, revealing that the automated wheel loader achieved over 30% fuel savings compared to traditional, human-operated cycles, with comparable or even enhanced levels of productivity. The insights gained from this HIL-based testing provided critical validation of our approach and highlighted the potential for deploying these optimized autonomous technologies in real-world off-road vehicles.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Ligand Many-Body Expansion as a General Approach for Accelerating Transition Metal Complex Discovery

Methods that accelerate the evaluation of molecular properties are essential for chemical discovery. While some degree of ligand additivity has been established for transition metal complexes, it is underutilized in asymmetric complexes, such as the square pyramidal coordination geometries highly relevant to catalysis. To develop predictive methods beyond simple additivity, we apply a many-body expansion to octahedral and square pyramidal complexes and introduce a correction based on adjacent ligands (i.e., the cis interaction model). We first test the cis interaction model on adiabatic spin-splitting energies of octahedral Fe(II) complexes, predicting DFT-calculated values of unseen binary complexes to within an average of 1.4 kcal/mol. Uncertainty analysis reveals the optimal basis, comprising the homoleptic and mer symmetric complexes. We next show that the cis model (i.e., the cis interaction model solved for the optimal basis) infers both DFT- and CCSD(T)-calculated model catalytic reaction energies to within 1 kcal/mol on average. The cis model predicts low-symmetry complexes with reaction energies outside the range of binary complex reaction energies. We observe that trans interactions are unnecessary for most monodentate systems but can be important for some combinations of ligands, such as complexes containing a mixture of bidentate and monodentate ligands. Lastly, we demonstrate that the cis model may be combined with Δ-learning to predict CCSD(T) reaction energies from exhaustively calculated DFT reaction energies and the same fraction of CCSD(T) reaction energies needed for the cis model, achieving around 30% of the error from using the CCSD(T) reaction energies in the cis model alone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Developing a data-driven method to constrain the antiproton background in the Mu2e experiment

The Mu2e experiment will search for CLFV neutrinoless coherent muon to electron conversion in the field of an Al nucleus. The expected signal is a 104.97 MeV/c monochromatic $e^-$ (CE). CE-like $e^-$’s could also come from $\bar{p}$’s annihilating in the Stopping Target (ST). The background induced by $\bar{p}$’s is expected to be low but has a large systematic uncertainty. It cannot be suppressed by the time window cut used to reduce the prompt background. However, $p\bar{p}$ annihilation in the ST is the only source of events in the Mu2e detector with multiple tracks coming from the ST, simultaneous in time, each with a momentum in the signal window region. We exploited this unique feature and developed algorithms to identify and reconstruct multi-track events. This paper discusses the status and prospects of this data-driven method to constrain the $\bar{p}$ background at Mu2e.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

An implementation of neural simulation-based inference for parameter estimation in ATLAS

Neural simulation-based inference (NSBI) is a powerful class of machine-learning-based methods for statistical inference that naturally handles high-dimensional parameter estimation without the need to bin data into low-dimensional summary histograms. Such methods are promising for a range of measurements, including at the Large Hadron Collider, where no single observable may be optimal to scan over the entire theoretical phase space under consideration, or where binning data into histograms could result in a loss of sensitivity. This work develops a NSBI framework for statistical inference, using neural networks to estimate probability density ratios, which enables the application to a full-scale analysis. It incorporates a large number of systematic uncertainties, quantifies the uncertainty due to the finite number of events in training samples, develops a method to construct confidence intervals, and demonstrates a series of intermediate diagnostic checks that can be performed to validate the robustness of the method. As an example, the power and feasibility of the method are assessed on simulated data for a simplified version of an off-shell Higgs boson couplings measurement in the four-lepton final states. This approach represents an extension to the standard statistical methodology used by the experiments at the Large Hadron Collider, and can benefit many physics analyses.

frequentist statistics↗
DOE OSTI2024

Annual Report for Structure-Aware Unsupervised, Transformational Machine Learning for Drug Discovery

The major goal of this project is to develop machine learning (ML) methods to enable improved predictive power on real drug discovery for novel targets. More specifically, we plan to demonstrate the capability and effectiveness of ML tools utilizing unlabeled large-volume protein-ligand datasets. We also plan to demonstrate the capability and effectiveness of the developed methods by testing on a realistic drug discovery task to identify pan-coronavirus protease inhibitors such as SARS-CoV-2. While the overall goals and milestones remain consistent with the original proposal, certain technical details have been modified, which we will describe in this report.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Inkjet Printing to Scale Perovskite and Silicon Tandem Solar Cell: Cooperative Research and Development Final Report, CRADA Number CRD-17-00690

The proposed project seeks to develop a method for inkjet printing of the active layer in perovskite solar cells for application in stand-alone products or added to conventional silicon solar cells in a mechanically-stacked tandem configuration. This technology presents significant advanced manufacturing challenges and opportunities in getting to scale, including development of novel uses for printing technologies and development of predictive quality control techniques.

14 SOLAR ENERGY↗
DOE OSTI2025

Serpent - Bison - THM Preliminary Multiphysics Modeling of a Nuclear Thermal Propulsion System Fuel Assembly

This work demonstrates the Monte Carlo neutronic and Thermo-Hydraulic coupling scheme using the Serpent code and MOOSE application Bison and Thermo Hydraulic Module. The coupling scheme is then applied to the reference BWX Technologies Nuclear Ther- mal Propulsion system at he fuel assembly level where it’s used to perform an analysis of the isothermal material coefficients and potential material reactivity worth. A method is developed to isolate which feedback effects should be considered for proceeding with reduced order deterministic neutronic modeling where branch off analysis must be con- ducted. The convergence behavior of the coupling scheme is demonstrated where it fol- lows the standard Picard iteration approach. Verification studies for the method of deduc- ing relevant feedback effects is also demonstrated.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗