Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mineral dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Experimentally simulated sea level rise destabilizes carbon-mineral associations in temperate tidal marsh soil

How sea level rise (SLR) alters carbon (C) dynamics in tidal salt marsh soils is unresolved. Changes in hydrodynamics could influence organo-mineral associations, influencing dissolved organic carbon (DOC) fluxes. As SLR increases the duration of inundation, we hypothesize that lateral DOC export will increase due to reductive dissolution of C-bearing iron (Fe) oxides, destabilizing soil C stocks and influencing greenhouse gas emissions. To test this, soil cores (0–8 cm depth) were collected from the high marsh of a temperate salt marsh that currently experiences changes in water level and soil redox oscillation due to spring-neap tides. Mesocosms experimentally simulated SLR by continuously inundating high marsh soils and were compared to mesocosms with Control conditions, where the water level oscillated on a spring-neap cycle. Porewater DOC, lateral DOC, and porewater reduced Fe (Fe 2+ ) concentrations were significantly higher in SLR treatments (1.7 ± 0.5 mM, 0.63 ± 0.14 mM, and 0.15 ± 0.11 mM, respectively) than Control treatments (1.2 ± 0.35 mM, 0.56 ± 0.15 mM, and 0.08 ± 01 mM, respectively Solid phase analysis with Fe extended X-ray absorption fine-structure spectroscopy further revealed that SLR led to > 3 times less Fe oxide-C coprecipitates than Control conditions In addition, the overall global warming potential (GWP) decreased under SLR due to suppressed CO 2 emissions. Our data suggest that SLR may increase lateral C export of current C stocks by dissolving C-bearing Fe oxides but decrease the overall GWP from emissions of soil trace gases. Finally, these findings have implications for understanding the fate of SOC dynamics under future SLR scenarios.

dissolved organic carbon↗
NASA NTRS2014

Experimental Alteration of Basalt to Support Interpretation of Remote Sensing and In Situ Meausrements from Mars

Major occurrences of hydrous alteration minerals on Mars have been found in Noachian impact craters formed in basaltic targets and detected using visible/near infrared (VNIR) spectroscopy. Until recently phyllosilicates were detected only in craters in the southern hemisphere [1, 2]. However, it has been reported that at least nine craters in the northern plains apparently excavated thick layers of lava and sediment to expose phyllosilicates [3] as well. The MER (Mars Exploration Rovers) rovers previously reported results of in situ measurement indicating the presence of alteration minerals on Mars [4,5] and it was recently reported that the Mars Curiosity rover has detected alteration phases in situ at Yellowknife Bay in Gale crater as well [6,7]. An important discovery for Mars geochronology is that the Chemistry and Mineralogy (CheMin) x-ray diffraction (XRD) instrument on Curiosity detected phyllosilicates indicating that phyllosilicate formation on Mars extended beyond the Noachian Epoch [8]. These discoveries indicate that Mars was globally altered by water in the past but does not constrain formation conditions for alteration phase occurrences, which have important implications for the evolution of the surface and the biological potential on Mars. Understanding the alteration assemblages produced by a range of conditions is vital for the interpretation of phyllosilicate spectral signatures as well as in situ measurements and to decipher the environment and evolution of early Mars. The martian surface has been intensely altered by meteorite impacts whose effects include brecciation and melting of target materials as well as the initiation of hydrothermal circulation in a hydrous target [9,10,11,12]. Impact effects may facilitate aqueous alteration of a basaltic target because the rate of silicate dissolution is a function of the degree of crystallinity, surface area, and temperature. The resultant alteration mineralogies from shocked basaltic target material are a function of the original mineral assemblage in the parent rocks, the chemistry of fluids that interacted with the rocks, and physico-chemical conditions (pH, temperatures, and pressure) during the time of mineral formation. Understanding the alteration assemblages produced by a range of conditions is vital for the interpretation of phyllosilicate spectral signatures and to decipher the environment and evolution of early Mars, and especially for identifying habitable niches in which life could be initiated and sustained. No experimentally controlled and well characterized analog materials that simulate martian shock metamorphism and alteration conditions currently exist for calibrating either remote sensing or in situ measurements of Mars. A series of experiments was initiated to assess the effects of systematic changes in the physico-chemical conditions on Mars analog materials thereby providing samples to ground-truth Mars remote sensing observations from CRISM (Compact Reconnaissance Imaging Spectrometer for Mars) and in situ measurements from Opportunity's Mössbauer and Curiosity's CHEMIN (Chemistry and Mineralogy X-Ray Diffraction/XRay Fluorescence) instruments. Results of initial experimental runs as analysed by SEM-EDS (Secondary Electron Microscopy -Energy Dispersive Spectroscopy) and X-ray Diffraction (XRD) analysis are reported here and lay the foundation for comparison with shocked and altered samples that will be characterized in the next phase of this work.

Bell, M. S.↗
DOE OSTI2024

Iron dissolution from Patagonian dust in the Southern Ocean: under present and future conditions

Although the input of desert dust as a key source of trace metals in the Southern Ocean (SO) has been previously studied, the dissolution process of metals in surface waters, particularly iron (Fe), remain poorly understood. Given the crucial role of Fe in primary production and the biological carbon pump in the SO, we focused on experimental estimations of Fe dissolution from Patagonian dust, the primary natural dust source in the SO. Our study considered both current and projected future conditions, encompassing sea-surface warming, acidification, increased photosynthetically active radiation, and doubled dust inputs. Through controlled laboratory experiments using filtered SO seawater, conducted over 7 days, we assessed changes in particulate Fe (pFe) concentrations, Fe redox speciation (Fe(II)/Fe(III)), and in the mineralogy of Fe-bearing dust in abiotic condition. The predominant minerals in the dust included quartz and aluminosilicates, with silicon (Si), aluminum (Al), and Fe as the major elements. No significant alterations in the mineralogy and the elemental composition of the dust were recorded during the dissolution experiments, neither under present nor under projected future conditions. The particulate Fe(II)/Fe(III) ratio remained consistently at 0.25 during the experiments, unaffected by changed conditions. Consequently, changes in environmental conditions in the SO would therefore not significantly alter the mineralogy and redox speciation of pFe in the Patagonian dust. On the contrary, pFe exhibited a dissolution rate of 3.8% and 1.6% per day under present and future conditions, respectively. The environmental changes anticipated for 2100 in the SO will likely to result in a decrease in the dissolution rate of pFe. Thus, even though a doubling of dust input by 2100 is anticipated, it will unlikely provide significantly more dissolved Fe (dFe) in seawater in the SO. Consequently, the future intensification of Patagonian dust inputs may not alleviate the Fe limitation in the SO.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Reductive biomining of pyrite by methanogens

Pyrite (FeS 2 ) is the most abundant iron sulfide mineral in Earth’s crust. Until recently, FeS 2 has been considered a sink for iron (Fe) and sulfur (S) at low temperature in the absence of oxygen or oxidative weathering, making these elements unavailable to biology. However, anaerobic methanogens can transfer electrons extracellularly to reduce FeS 2 via direct contact with the mineral. Reduction of FeS 2 occurs through a multistep process that generates aqueous sulfide (HS – ) and FeS 2 -associated pyrrhotite (Fe 1-x S). Subsequent dissolution of Fe 1-x S provides Fe(II) (aq) , but not HS – , that rapidly complexes with HS – (aq) generated from FeS 2 reduction to form soluble iron sulfur clusters [nFeS (aq) ]. Cells assimilate nFeS (aq) to meet Fe/S nutritional demands by mobilizing and hyperaccumulating Fe and S from FeS 2 . As such, reductive dissolution of FeS 2 by methanogens has important implications for element cycling in anoxic habitats, both today and in the geologic past.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

A comparison of iron extraction methods for the determination of degree of pyritisation and the recognition of iron-limited pyrite formation

Measurements of degree of pyritisation require an estimate of sediment iron which is capable of reaction with dissolved sulphide to form pyrite, either directly or indirectly via iron monosulphide precursors. Three dissolution techniques (buffered dithionite, cold 1 M HCl, boiling 12 M HCl) were examined for their capacity to extract iron from a variety of iron minerals, and iron-bearing sediments, as a function of different extraction times and different grain sizes. All the iron oxides studied are quantitatively extracted by dithionite and boiling HCl (but not by cold HCl). Both HCl techniques extract more iron from silicates than does dithionite but probably about the same amounts as are potentially capable of sulphidation. Modern sediment studies indicate that most sedimentary pyrite is formed rapidly from iron oxides, with smaller amounts formed more slowly from iron silicates (if sufficient geologic time is available). It is therefore recommended that the degree of pyritisation be defined with respect to the dithionite-extractable (mainly iron oxide) pool and/or the boiling HCl-extractable pool (which includes some silicate iron) for the recognition of iron-limited pyritisation.

NASA Discipline Exobiology↗
DOE OSTI2023

Solvent Dynamics Are Critical to Understanding Carbon Dioxide Dissolution and Hydration in Water

Simulations of carbon dioxide (CO 2 ) in water may aid in understanding the impact of its accumulation in aquatic environments and help advance technologies for carbon capture and utilization (via, e.g., mineralization). Quantum mechanical (QM) simulations based on static molecular models with polarizable continuum solvation poorly reproduce the energetics of CO 2 hydration to form carbonic acid in water, independent of the level of QM theory employed. Only with density-functional-theory-based molecular dynamics and rare-event sampling, followed by energy corrections based on embedded correlated wavefunction theory (in conjunction with density functional embedding theory), can a close agreement between theory and experiment be achieved. Such multilevel simulations can serve as benchmarks for simpler, less costly models, giving insight into potential errors of the latter. The strong influence of sampling/averaging over dynamical solvent configurations on the energetics stems from the difference in polarity of both the transition state and product (both polar) versus the reactant (nonpolar). When a solute undergoes a change in polarity during reaction, affecting its interaction with the solvent, careful assessment of the energetic contribution of the solvent response to this change is critical. Here, we show that static models (without structural sampling) that incorporate three explicit water molecules can yield far superior results than models with more explicit water molecules because fewer water molecules yield less configurational artifacts. Static models intelligently incorporating both explicit (molecules directly participating in the reaction) and implicit solvation, along with a proper QM theory, e.g., CCSD(T) for closed-shell systems, can close the accuracy gap between static and dynamic models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Reactive binder and aggregate interfacial zones in the mortar of Tomb of Caecilia Metella concrete, 1C BCE, Rome

Integrated spectroscopic analyses and synchrotron X-ray microdiffraction investigations provide insights into the long-term reactivity of volcanic aggregate components and calcium-aluminum-silicate-hydrate (C-A-S-H) binder in mortar samples from the robust concrete of the sepulchral corridor of the Tomb of Caecilia Metella, 1st C BCE, Rome. The results of innovative micrometer-scale analytical maps indicate that Pozzolane Rosse tephra components–scoria groundmass, clinopyroxene, and leucite crystals–contributed to pozzolanic production of C-A-S-H binder and then remained reactive long after hydrated lime (Ca(OH) 2 ) was fully consumed. The C-A-S-H binding phase is reorganized into wispy halos and tendril-like strands, some with nanocrystalline preferred orientation or, alternatively, split into elongate features with short silicate chain lengths. These microstructures apparently record chemical and structural destabilization of C-A-S-H during excessive incorporation of Al 3+ and K + released through leucite dissolution. Resistance to failure may result from the intermittent toughening of interfacial zones of scoriae and clinopyroxene crystals with post-pozzolanic strätlingite and Al-tobermorite mineral cements and from long-term remodeling of the pozzolanic C-A-S-H binding phase. Roman builders’ selection of a leucite-rich facies of Pozzolane Rosse tephra as aggregate and construction of the tomb in an environment with high surface and ground water exposure apparently increased beneficial hydrologic activity and reactivity in the concrete.

36 MATERIALS SCIENCE↗
NASA NTRS2005

Hematite Spherules in Basaltic Tephra Altered Under Aqueous, Acid-Sulfate Conditions on Mauna Kea Volcano, Hawaii: Possible Clues for the Occurrence of Hematite-Rich Spherules in the Burns Formation at Meridiani Planum, Mars

Iron-rich spherules (>90% Fe2O3 from electron microprobe analyses) approx.10-100 microns in diameter are found within sulfate-rich rocks formed by aqueous, acid-sulfate alteration of basaltic tephra on Mauna Kea volcano, Hawaii. Although some spherules are nearly pure Fe, most have two concentric compositional zones, with the core having a higher Fe/Al ratio than the rim. Oxide totals less than 100% (93-99%) suggest structural H2O and/or /OH. The transmission Moessbauer spectrum of a spherule-rich separate is dominated by a hematite (alpha-Fe2O3) sextet whose peaks are skewed toward zero velocity. Skewing is consistent with Al(3+) for Fe(3+) substitution and structural H2O and/or /OH. The grey color of the spherules implies specular hematite. Whole-rock powder X-ray diffraction spectra are dominated by peaks from smectite and the hydroxy sulfate mineral natroalunite as alteration products and plagioclase feldspar that was present in the precursor basaltic tephra. Whether spherule formation proceeded directly from basaltic material in one event (dissolution of basaltic material and precipitation of hematite spherules) or whether spherule formation required more than one event (formation of Fe-bearing sulfate rock and subsequent hydrolysis to hematite) is not currently constrained. By analogy, a formation pathway for the hematite spherules in sulfate-rich outcrops at Meridiani Planum on Mars (the Burns formation) is aqueous alteration of basaltic precursor material under acid-sulfate conditions. Although hydrothermal conditions are present on Mauna Kea, such conditions may not be required for spherule formation on Mars if the time interval for hydrolysis at lower temperatures is sufficiently long.

Morris, R. V.↗
DOE OSTI2020

Acid Erosion of Carbonate Fractures and Accessibility of Arsenic-Bearing Minerals: In Operando Synchrotron-Based Microfluidic Experiment

Underground flows of acidic fluids through fractured rock can create new porosity and increase accessibility to hazardous trace elements such as arsenic. In this study, we developed a custom microfluidic cell for an in operando synchrotron experiment using X-ray attenuation. The experiment mimics reactive fracture flow by passing an acidic fluid over a surface of mineralogically heterogeneous rock from the Eagle Ford shale. Over 48 h, calcite was preferentially dissolved, forming an altered layer 200–500 μm thick with a porosity of 63–68% and surface area >10$\times$ higher than that in the unreacted shale as shown by xCT analyses. Calcite dissolution rate quantified from the attenuation data was 3 $\times$ 10 –4 mol/m 2 s and decreased to 3 $\times$ 10 –5 mol/m 2 s after 24 h because of increasing diffusion limitations. Erosion of the fracture surface increased access to iron-rich minerals, thereby increasing access to toxic metals such as arsenic. Quantification using XRF and XANES microspectroscopy indicated up to 0.5 wt % of As(-I) in arsenopyrite and 1.2 wt % of As(V) associated with ferrihydrite. This study provides valuable contributions for understanding and predicting fracture alteration and changes to the mobilization potential of hazardous metals and metalloids.

58 GEOSCIENCES↗
DOE OSTI2024

Roles of kaolinite-oil-gas molecular interactions in hydrogen storage within depleted reservoirs

Hydrogen is a clean alternative to fossil fuels, emitting only water vapor during combustion. In a future hydrogen economy, large-scale storage will be an important component of the supply chain. Due to its low volumetric density, conventional surface storage methods are inadequate. Underground hydrogen storage (UHS) offers a viable solution, enabling the storage of millions of cubic meters. Among potential geological sites, including salt caverns, aquifers, and depleted gas reservoirs, depleted oil reservoirs show promise. Studying hydrogen interactions with residual oil and reservoir minerals is vital for understanding the properties of hydrogen and the reservoir post-injection. In this work, we employed molecular dynamics simulations to gain molecular-level insights into these interactions. We investigated hydrogen dissolution in oil, adsorption at kaolinite/oil interfaces, the role of CO 2 as a cushion gas, and the influence of kaolinite’s hydrophobicity on H 2 behavior. The main findings include: (1) hydrogen dissolves more in oil than in water, (2) the introduction of CO 2 suppresses hydrogen dissolution in oil and reduces the interfacial tension (IFT) between oil and gas, (3) CO 2 decreases H 2 partitioning near kaolinite surfaces due to its strong affinity for the hydrophilic gibbsite surface of kaolinite, and (4) CO 2 is more effective than H 2 in reducing IFT between kaolinite and the oil–gas mixture. These findings emphasize the effectiveness of CO 2 as a cushion gas and the important role of clay hydrophobicity in UHS, providing insights that are challenging to obtain experimentally.

08 HYDROGEN↗
DOE OSTI2021

Anhydrous vs Hydrated f-Element Acetate Polymers Dictated by the Stoichiometry of Protic Acidic/Basic Azole Mixtures

Continuing our investigations of ionic liquid (IL) based routes to a library of f-element/soft donor complexes which could be studied crystallographically, we have explored the dissolution of f-element salts in protic imidazole-based ILs containing only soft donors at high temperatures to drive off volatiles, including water and carboxylic or mineral acids. Here we present our results, reacting acidic and basic azoles in 1:3 or 1:1 stoichiometric compositions at elevated temperature, followed by saturation with Nd(OAc) 3 ·xH 2 O or Ce(OAc) 3 ·xH 2 O, which led to 13 new metal–acetate polymeric complexes identified by single-crystal X-ray diffraction. We found that the diversity in coordination modes of the simple acetate ligand that interfere with substitution of the softer N donors led to several readily crystallizable complexes forming two distinct groups with respect to f-element interaction with the ionic liquid precursors. When the acidic/basic azole ratio was 1:3, acetate and a neutral basic azole were found to be coordinated to the metal centers but no water, although in one case (2) water was observed in the secondary coordination sphere: [Ce(μ 2 -OAc) 3 (C 1 im)] n (1, C 1 im = 1-methylimidazole), [Nd(μ 2 -(OAc) 3 (C 1 im)] n ·nH 2 O (2), [Ce(μ 2 -OAc) 3 (C 2 im)] n (3, C 2 im = 1-ethylimidazole), [Ln(μ 2 -OAc) 3 DMF] n (Ln = Nd (4), Ce (5); dimethylformamide (DMF) was substituted for the azole mixture), and [Nd(μ 2 -OAc) 3 (C 4 im)] n (6, C 4 im = 1-butylimidazole). However, when the stoichiometric ratio was 1:1, water was always observed coordinated to the metal ions with the acidic azole included in the structure as a solvate or cocrystal, despite a higher reaction temperature: [Nd(μ 2 -OAc) 3 (OH 2 )] n ·n(1,2,3-Taz) (7, 1,2,3-Taz = 1,2,3-triazole), [Ln(μ 2 -OAc) 3 (OH 2 )] n ·n(4,5-DCim) (Ln = Nd (8), Ce (9), 4,5-DCim = 4,5-dicyanoimidazole), [Ln(μ 2 -OAc) 3 (OH 2 )] n ·n(3,5-diNH 2 -1,2,4-Taz) (Ln = Nd (10), Ce (11), 3,5-diNH 2 -1,2,4-Taz = 3,5-diamino-1,2,4-triazole), [Ce(μ 2 -OAc) 3 (OH 2 )] n ·n(3-NH 2 -1,2,4-Taz) (12, 3-NH 2 -1,2,4-Taz = 3-amino-1,2,4-triazole), and [Nd(μ 2 -OAc) 3 (OH 2 )] n ·n(5-NH 2 -Tz) (13, 5-NH2-Tz = 5-aminotetrazole). All of the compounds retain the Ln:OAc– ratio of 1:3 and form 1D polymeric chains; however, they exhibit a variety of coordination modes affecting the degree of chain condensation. The isolation of both hydrated and anhydrous products revealed different abilities of the investigated soft N-donors to compete with O-donors finding their place in the coordination sphere of the lanthanide or in the crystal lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Proteomic Analysis of Methanococcus voltae Grown in the Presence of Mineral and Nonmineral Sources of Iron and Sulfur

Iron sulfur (Fe-S) proteins are essential and ubiquitous across all domains of life, yet the mechanisms underpinning assimilation of iron (Fe) and sulfur (S) and biogenesis of Fe-S clusters are poorly understood. This is particularly true for anaerobic methanogenic archaea, which are known to employ more Fe-S proteins than other prokaryotes. Here, we utilized a deep proteomics analysis of Methanococcus voltae A3 cultured in the presence of either synthetic pyrite (FeS 2 ) or aqueous forms of ferrous iron and sulfide to elucidate physiological responses to growth on mineral or nonmineral sources of Fe and S. The liquid chromatography-mass spectrometry (LCMS) shotgun proteomics analysis included 77% of the predicted proteome. Through a comparative analysis of intra- and extracellular proteomes, candidate proteins associated with FeS 2 reductive dissolution, Fe and S acquisition, and the subsequent transport, trafficking, and storage of Fe and S were identified. The proteomic response shows a large and balanced change, suggesting that M. voltae makes physiological adjustments involving a range of biochemical processes based on the available nutrient source. Among the proteins differentially regulated were members of core methanogenesis, oxidoreductases, membrane proteins putatively involved in transport, Fe-S binding ferredoxin and radical S-adenosylmethionine proteins, ribosomal proteins, and intracellular proteins involved in Fe-S cluster assembly and storage. This work improves our understanding of ancient biogeochemical processes and can support efforts in biomining of minerals. Clusters of iron and sulfur are key components of the active sites of enzymes that facilitate microbial conversion of light or electrical energy into chemical bonds. The proteins responsible for transporting iron and sulfur into cells and assembling these elements into metal clusters are not well understood. Using a microorganism that has an unusually high demand for iron and sulfur, we conducted a global investigation of cellular proteins and how they change based on the mineral forms of iron and sulfur. Understanding this process will answer questions about life on early earth and has application in biomining and sustainable sources of energy.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Thermodynamic characterization of synthetic lead-arsenate apatites with different halogen substitutions

Abstract Thermodynamic parameters have been measured for synthetic analogs of the mimetite-group minerals Pb5(AsO4)3X (X = OH, Cl, Br, I) belonging to the apatite supergroup. Phases precipitated from aqueous solutions under ambient conditions with well characterized structures and compositions were studied. For each phase, dissolution enthalpy was experimentally determined by oxide melt drop solution calorimetry in a molten solvent of sodium molybdate (3Na2O·4MoO3) at 976 K. The enthalpy of formation from the elements ΔHf,elo was calculated using thermochemical cycles and was −3030.6 ± 11.5, −3026.6 ± 15.8, −2967.6 ± 25.0, and −2993.1 ± 12.2 kJ/mol for Pb5.00(AsO4)3.00OH0.86(CO3)0.07, Pb5.00(AsO4)3.00Cl0.80(CO3)0.10, Pb5.00(AsO4)3.00Br0.80(CO3)0.10, and Pb5.00(AsO4)3.00I0.45OH0.35(CO3)0.10, respectively. These ΔHf,elo values exhibit typical trends for apatites: they increased (were less negative) with the increasing molar mass and ionic radius of X and decreased with the electronegativity and ionization energy of X. The compilation and comparison of data for Ca-, Pb-, P-, and As-apatites revealed correlations indicating that thermodynamic enthalpic stability is largely influenced by chemical factors (e.g., differences in electronegativities of the elements, ionization energy, or ionic characteristics of the bonds) and to a lesser extent by physical and geometric parameters in the crystal structure related to the mass and size of the X anion. Using the correlations, it was possible to estimate the value of hitherto unknown ΔHf,elo for Pb5(AsO4)3F, −3144.3 ± 66.5 kJ/mol. The observed relationships apply to the entire apatite supergroup and can be used to predict the values of ΔHf,elo for phases that have not been studied experimentally. The new data on environmentally significant phases will contribute to the modeling of mineral-water interactions, particularly for potential use in the remediation of soils and wastes contaminated with Pb and As and in the immobilization of radioactive waste containing I-129.

Geochemistry & Geophysics↗
DOE OSTI2021

Zn uptake by illite and argillaceous rocks

The uptake of Zn by Illite du Puy (IdP) and two argillaceous rocks, Opalinus Clay (OPA) and Boda Claystone (BODA) was investigated. The uptake of Zn by illite was studied in 0.1 M NaCl at near-neutral pH and Zn loadings varying from 2.1 to 42 mmol/kg. The Zn uptake by the two argillaceous rock systems was carried out in 0.1 M NaCl at pH 7.2 and in their respective porewaters at pH 8.0 to evaluate the influence of porewater composition. The Zn loadings varied from 1.8 to 86 mmol/kg and 1.7 to 60 mmol/kg for OPA and BODA, respectively. The simplified “bottom-up approach” to predict the uptake of Zn to natural rocks with different clay mineral contents and porewater compositions was tested. This approach was found to be applicable in the argillaceous rock systems at low Zn equilibrium ([Zn] eql ) concentrations below 10 -7 M. However, at [Zn]eql above 10 -7 M, the model calculations clearly underpredicted the sorption data. The extended X-ray absorption fine structure (EXAFS) results support findings based on wet chemistry calculations using the 2 site protolysis non-electrostatic surface complexation and cation exchange (2SPNE SC/CE) sorption model. In the IdP system with prolonged reaction times of up to two years, formation of Zn precipitates was not observed. This indicates that the Zn surface complexes are stable over a time period of two years, and dissolution and recrystallization processes might not play a significant role in the Zn-IdP uptake process. In addition, the EXAFS results on illite corroborate previous findings on the existence of weak and strong sites types in dioctahedral clay minerals, as assumed in the 2SPNE SC/CE model. In the OPA and BODA systems, precipitation processes could start to begin at metal loadings of 16 mmol/kg and 24 mmol/kg, respectively. The differences between argillaceous rock samples prepared in NaCl and porewater are modest indicating that in the case of Zn the clay minerals play a predominant role in the uptake process, and that the effects originating from the porewater are minor. Furthermore, despite the differences in mineralogy, both argillaceous rocks show the same uptake behaviour, indicating that the clay minerals are predominantly responsible for the sorption at low and the precipitation processes at higher Zn concentrations. The study demonstrates how results on “pure” systems such as IdP can be transferred to predict the uptake by argillaceous rocks at low sorbate concentrations.

58 GEOSCIENCES↗
DOE OSTI2026

Desorption of Phosphate from Iron-Bearing Soil Minerals by a Plant Secondary Metabolite

In soils, phosphorus readily adsorbs to the surfaces of ubiquitous iron (oxyhydr)oxide minerals, rendering it less accessible to plants and microorganisms. Plants have a number of strategies to access iron, among them the secretion of redox-active metabolites from their roots. Although these strategies likely increase the bioavailability of surface-adsorbed phosphorus through reductive dissolution, their effect on phosphorus cycling has not yet been investigated. We tested the ability of fraxetin, a coumarin-type redox-active metabolite produced by the model plant Arabidopsis thaliana and other dicotyledon plant species, to reductively solubilize phosphate from the surface of ferrihydrite. Our findings show that, at low and neutral pH, fraxetin increased aqueous phosphate concentrations under both oxic and anoxic conditions; at high pH, it was only effective in anoxic experiments. Additionally, a combination of liquid chromatography–mass spectrometry and spectroscopic methods demonstrated substantial fraxetin adsorption to the mineral surface but showed that iron reduction did not alter the mineral structure or change the nature of the chemical environment of the phosphorus atom over short time scales. These results provide evidence that the secretion of redox-active metabolites from roots is likely to be an effective phosphorus acquisition tactic in iron-rich soils.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of oxidative breakers on organic matter degradation, contaminant mobility and critical mineral release during shale-fracturing fluid interactions in the Marcellus Shale

Oil and gas production from organic-rich shale formations has become viable through advancements in multistage hydraulic fracturing. However, fluctuations in oil and gas prices, coupled with the sharp decline in gas production after the initial days of fracturing operations, drive operators to devise strategies for enhancing hydrocarbon production. The use of highly reactive fracturing fluids that include strong oxidizing agents, also known as breakers, can potentially increase well productivity. The oxidative breakers are used to reduce the viscosity of gel-based fluids after the proppant is transported into fracture zones of the target formation. These breakers can also degrade the organic matter, enhancing the release of hydrocarbons. However, chemical byproducts generated by the interaction of oxidative breakers with the shale matrix have not been extensively studied. Here, this study investigated the fluid-rock interactions between Marcellus Shale and synthetic hydraulic fracturing fluid (HFF) solutions comprising three different oxidative breakers, i.e., ammonium persulfate, sodium bromate, and sodium hypochlorite, commonly used in the Appalachian Basin, USA. Our results demonstrate that the type of oxidizing breakers used in the HFF controlled the type and amount of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) produced. In all HFF reacted effluents, we observed the transformation of VOCs and the presence of organic acids in variable amounts. However, effluents from HFF containing sodium bromate and sodium hypochlorite breakers showed the presence of several halogenated organic compounds. Changes in major ions and mineralogy indicate that carbonate dissolution and barite precipitation were ubiquitous in all shale reacted effluents. Our results also demonstrate that the addition of oxidative breakers increased the concentration of several major and trace elements in the effluents. These elements fall under the critical mineral (CM) or critical element category due to their high demand in emerging technologies and susceptibility to supply chain disruption due to variety of factors. However, before oxidative breakers can be used at a larger field scale to enhance the release and recovery of CM and hydrocarbons, a better understanding is required of the potential environmental impacts associated with the generation and transformation of contaminants during breaker-fluid-rock interaction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Iron precipitation under controlled oxygen flow: Mineralogical implications for BIF precursors in the Archean ocean

Banded iron formation (BIF) deposition in the Archean ocean is thought to have been initiated by the oxidation of dissolved iron into ferric primary precursor phases that descended through the water column and were deposited on the seafloor. Effective interpretation of the trace element and isotopic composition of BIFs in the geologic record requires an understanding of the identity and longevity of those precursor phases. Temporal and spatial variation in oxidant concentration and ocean chemistry may have driven precursor mineralogy. Furthermore, precursor phases may undergo transitions during descent and burial. This experimental study follows the evolution of iron mineralogy, speciation, and redox state during the precipitation of iron under variable oxygen fluxes and in fluids containing different iron-complexing anions (chloride, sulfate, and phosphate). Additionally, suspensions collected after incomplete oxidation were anoxically aged to simulate changes to precursor mineralogy during descent below the seawater redoxcline. Results from X-ray diffraction, sequential dissolution, colorimetric determination of Fe redox state, and Fe K-edge X-ray absorption fine structure spectroscopy showed that under all experimental conditions, intermediate precipitates collected before complete iron uptake contained mineralized ferrous iron. Purely ferric mineral assemblages were not observed until iron was removed from solution. In low-oxygen experiments, intermediate precipitates contained phases with stoichiometric Fe 2+ , including magnetite, vivianite, and green rust (GR). Chloride green rust (GR1) had more ferric iron than sulfate green rust (GR2) and more readily transitioned to magnetite via disproportionation. GR2 was stable over a broader range of iron uptake; magnetite appeared mainly as an additional oxidation product in sulfate solution. In high oxygen experiments, mineralized ferrous iron occurred in amorphous phases or as a non-stoichiometric component in ferric oxides; final ferric assemblages were less crystalline than in low-oxygen equivalents. Low concentrations of phosphate increased the total iron oxidation rate, but also increased the ferrous content of intermediate precipitates. The incorporation of phosphate stabilized GR2 and facilitated GR2 precipitation over a larger range of iron uptake. In higher concentrations of phosphate, vivianite and poorly crystalline ferric hydroxides formed in place of GR. Here, these findings suggest that over a range of possible ocean chemistries, mixed-valence phases may have been short lived but relevant precursors to BIF. Additionally, anionic chemistry and oxidant concentration are shown to influence the crystallinity and chemical resistivity of final ferric assemblages, affecting their reactivity during later anoxic burial.

58 GEOSCIENCES↗