Search NASA⌕ Search

SEARCH · Search NASA

Results for “Module”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Residential photovoltaic module and array requirements study

Design requirements for photovoltaic modules and arrays used in residential applications were identified. Building codes and referenced standards were reviewed for their applicability to residential photovoltaic array installations. Four installation types were identified - integral (replaces roofing), direct (mounted on top of roofing), stand-off (mounted away from roofing), and rack (for flat or low slope roofs, or ground mounted). Installation costs were developed for these mounting types as a function of panel/module size. Studies were performed to identify optimum module shapes and sizes and operating voltage cost drivers. It is concluded that there are no perceived major obstacles to the use of photovoltaic modules in residential arrays. However, there is no applicable building code category for residential photovoltaic modules and arrays and additional work with standards writing organizations is needed to develop residential module and array requirements.

Nearhoof, S. L.↗
NASA NTRS1980

Design, fabrication, test, and qualification and price analysis of third generation design solar cell modules

The Block 4 shingle type module makes it possible to apply a photovoltaic array to the sloping roof of a residential building by simply nailing the overlapping hexagon shaped shingles to the plywood roof sheathing. This third-generation shingle module design consists of nineteen series connected 100 mm diameter solar cells which are arranged in a closely packed hexagon configuration to provide in excess of 75 watts/sq m of exposed module area under standard operating conditions. The solar cells are individually bonded to the embossed underside of a 4.4 mm thick thermally tempered piece of glass. An experimental silicone pottant was used as the transparent bonding adhesive between the cells and glass. The semi-flexible portion of each shingle module is a composite laminate construction consisting of an outer layer of FLEXSEAL bonded to an inner core of closed cell polyethylene foam. Silaprene is used as the substrate laminating adhesive. The module design has satisfactorily survived qualification testing program which includes 50 thermal cycles between -40 and +90 C, a seven day temperature-humidity exposure test, and a wind resistance test.

Shepard, N. F.↗
NASA NTRS1980

Correlator computer interface and module implementation: Mark 3 processor

Two hardware aspects of the Mark 3 correlator are briefly described. The first area concerns the choice of interface to the controlling minicomputer and the second area concerns the implementation of the correlator module. Multiple computer automated measurement and control (CAMAC) modules and a single large CAMAC module were considered as possible packaging forms for the correlator. The large CAMAC module approach was chosen because of the difficulty in partitioning the correlator with minimum interconnections, the fabrication economy of a single large planar assembly, and the desire to minimize the number of modules.

Nesman, E. F.↗
NASA NTRS1980

Functional specification of the Performance Measurement (PM) module

The design of the Performance Measurement Module is described with emphasis on what the PM Module would do, and what it would look like to the user. The PM Module as described could take several man-years to develop. An evolutionary approach to the implementation of the PM Module is presented which would provide an operational baseline PM Module within a few months.

Berliner, J. E.↗
NASA NTRS1980

Automated solar module assembly line

The solar module assembly machine which Kulicke and Soffa delivered under this contract is a cell tabbing and stringing machine, and capable of handling a variety of cells and assembling strings up to 4 feet long which then can be placed into a module array up to 2 feet by 4 feet in a series of parallel arrangement, and in a straight or interdigitated array format. The machine cycle is 5 seconds per solar cell. This machine is primarily adapted to 3 inch diameter round cells with two tabs between cells. Pulsed heat is used as the bond technique for solar cell interconnects. The solar module assembly machine unloads solar cells from a cassette, automatically orients them, applies flux and solders interconnect ribbons onto the cells. It then inverts the tabbed cells, connects them into cell strings, and delivers them into a module array format using a track mounted vacuum lance, from which they are taken to test and cleaning benches prior to final encapsulation into finished solar modules. Throughout the machine the solar cell is handled very carefully, and any contact with the collector side of the cell is avoided or minimized.

Bycer, M.↗
NASA NTRS1982

Jovian modulation of interplanetary electrons as observed with Voyagers 1 and 2

The release of magnetospheric electrons from Jupiter into interplanetary space is modulated by the Jovian rotation period. The Voyager 1 and 2 observations showed that the modulation period agrees on the average with the synodic period of Jupiter (9h 55m 33.12s), but over intervals of weeks it can differ from the synodic period by several minutes. The lack of exact synchronization is attributed to changes of the plasma population in the Jovian magnetosphere. The Jovian modulation appears to be a persistent feature of the interaction between the solar wind and the magnetosphere and the disappearance of the modulation away from Jupiter is attributed to interplanetary propagation conditions. This leads to the following limits on the diffuse coefficient for interplanetary electrons: kappa perpendicular is or = 8 x 10 to the 19th power sq cm/s and kappa parallel is or = 10 to the 21st power sq cm/s. Modulation was still detectable at 3.8 A.U. behind Jupiter in the far magnetotail. This requires a mean free path in the tail 0.75 A.U. and good field connection along the tail to Jupiter.

Schardt, A. W.↗
NASA NTRS1982

Modulation of energetic particle fluxes by a mixed mode of transverse and compressional waves

Modulation characteristics of particle fluxes in the presence of a mixed mode of compressional and transverse magnetic waves at hydromagnetic frequencies are investigated through kinetic perturbation of the distribution function. The magnetospheric medium where the particles are modulated contains both the magnetic and pressure gradients. The modulation features are found to be strongly dependent on the energy and pitch angle of the particles. Drifting particles can resonate with waves whose phase velocities are close to their drift velocities. When this occurs, the modulation amplitudes become significantly large and large phase shifts will occur. It is pointed out that resonance is important for particles with mid pitch angles (40-70 deg). The phase shift between the particle modulations and the magnetic field oscillations are strongly controlled by the combined effects of transverse and compressional wave components and/or the occurrence of drift resonance. Numerical calculations are performed using the dispersion relation of drift mirror Alfven waves as an example of waves with both compressional and transverse components.

Lin, C. S.↗
NASA NTRS1983

The application of encapsulation material stability data to photovoltaic module life assessment

For any piece of hardware that degrades when subject to environmental and application stresses, the route or sequence that describes the degradation process may be summarized in terms of six key words: LOADS, RESPONSE, CHANGE, DAMAGE, FAILURE, and PENALTY. Applied to photovoltaic modules, these six factors form the core outline of an expanded failure analysis matrix for unifying and integrating relevant material degradation data and analyses. An important feature of this approach is the deliberate differentiation between factors such as CHANGE, DAMAGE, and FAILURE. The application of this outline to materials degradation research facilitates the distinction between quantifying material property changes and quantifying module damage or power loss with their economic consequences. The approach recommended for relating material stability data to photovoltaic module life is to use the degree of DAMAGE to (1) optical coupling, (2) encapsulant package integrity, (3) PV circuit integrity or (4) electrical isolation as the quantitative criterion for assessing module potential service life rather than simply using module power loss.

Coulbert, C. D.↗
NASA NTRS1981

Outdoor and laboratory testing of photovoltaic modules

An overview of outdoor and laboratory testing being applied to terrestrial photovoltaic modules is presented. Descriptions of the test procedures, examples of results, and discussion of the advantages and shortcomings of each approach are included. The test program consists of real-time outdoor testing of systems, modules and materials, and accelerated outdoor testing and laboratory testing of modules. The test results suggest that the various types of tests complement each other and contribute toward the objective of verifying the environmental suitability of the product. A description of representative photovoltaic systems operational in the U.S. in 1981 is presented, along with an identification, description, and physical inspection summary of JPL test module sites and a summary of degradation and failure data for the modules.

Hoffman, A.↗
NASA NTRS1984

Solar energy modulator

A module is described with a receiver having a solar energy acceptance opening and supported by a mounting ring along the optic axis of a parabolic mirror in coaxial alignment for receiving solar energy from the mirror, and a solar flux modulator plate for varying the quantity of solar energy flux received by the acceptance opening of the module. The modulator plate is characterized by an annular, plate-like body, the internal diameter of which is equal to or slightly greater than the diameter of the solar energy acceptance opening of the receiver. Slave cylinders are connected to the modulator plate for supporting the plate for axial displacement along the axis of the mirror, therby shading the opening with respect to solar energy flux reflected from the surface of the mirror to the solar energy acceptance opening.

Hale, R. R.↗
NASA NTRS1985

The 1973-1984 Solar Modulation of Cosmic Ray Nuclei

As a continuation of the program of solar modulation studies, new measurements were carried out with the cosmic ray telescope on the Earth satellite IMP-8, of the intensity time variations and the energy spectra of galactic cosmic ray protons, helium, carbon and oxygen from 1980 through 1984 including the recent solar maximum. In order to test the applicability of a steady state model of solar modulation during a period which includes times of rapidly changing modulation, these fluxes were equated with the predictions of a conventional model of solar modulation which assumes equilibrium between modulation mechanisms. It is found that for a reasonable range of variations of the diffusion coefficient the model predictions can be made to agree with the measurements at essentially all times during the studied period. The model can account also for the observed hysteresis effects between cosmic rays of different rigidities.

Garcia-Munoz, M.↗
NASA NTRS1985

Modulational development of nonlinear gravity-wave groups

Observations of the development of nonlinear surface gravity-wave groups are presented, and the amplitude and phase modulations are calculated using Hilbert-transform techniques. With increasing propagation distance and wave steepness, the phase modulation develops local phase reversals whose locations correspond to amplitude minima or nodes. The concomitant frequency modulation develops jumps or discontinuities. The observations are compared with recent similar results for wavetrains. The observations are modelled numerically using the cubic nonlinear Schroedinger equation. The motivation is twofold: to examine quantitatively the evolution of phase as well as amplitude modulation, and to test the inviscid predictions for the asymptotic behavior of groups versus long-time observations. Although dissipation rules out the recurrence, there is a long-time coherence of the groups. The phase modulation is found to distinguish between dispersive and soliton behavior.

Chereskin, T. K.↗
NASA NTRS1986

Telescoping Space-Station Modules

New telescoping-space-station design involves module within a module. After being carried to orbit within payload bay of Space Shuttle orbiter, outer module telescopically deployed to achieve nearly twice as much usable space-station volume per Space Shuttle launch. Closed-loop or "race-track" space-station configurations possible with this concept and provide additional benefits. One benefit involves making one of modules double-walled haven safe from debris, radiation, and like. Module accessible from either end, and readily available to all positions in space station. Concept also provides flexibility in methods in which Space Shuttle orbiter docked or berthed with space station and decrease chances of damage.

Witcofski, R. D.↗
NASA NTRS1985

Controller and interface module for the High-Speed Data Acquisition System correlator/accumulator

One complex channel of the High-Speed Data Acquisition System (a subsystem used in the Goldstone solar system radar), consisting of two correlator modules and one accumulator module, is operated by the controller and interface module interfaces are provided to the VAX UNIBUS for computer control, monitor, and test of the controller and correlator/accumulator. The correlator and accumulator modules controlled by this module are the key digital signal processing elements of the Goldstone High-Speed Data Acquisition System. This fully programmable unit provides for a wide variety of correlation and filtering functions operating on a three megaword/second data flow. Data flow is to the VAX by way of the I/O port of a FPS 5210 array processor.

Brokl, S. S.↗
NASA NTRS1986

Space station science lab module

The Science Lab Module (SLM), a key component of the proposed Space Station (SS) orbiting complex, is undergoing intensive study during the project design phase which is currently underway. The SLM is one of the two laboratory modules which, together with two habitation modules, comprise the core elements of the SS reference configurations. Current project emphasis is to configure the SLM as a national science laboratory module facility which would have four major functions: maximize life sciences research potential, support operations of attached payloads, provide shirtsleeve environment for other payload instrument servicing, and support other science requirements. The design studies are focusing on outfitting a common module basic design to accommodate the four specific functions. Although design work for outfitting the SLM for life sciences research is underway, science requirements for the other sciences and functions are not as well developed.

Devincenzi, D. L.↗
NASA NTRS1986

The dependence of solar modulation on the sign of the cosmic ray particle charge

ISEE-3 spacecraft cosmic ray telescope data on the modulation of cosmic ray electrons are compared with IMP-8 spacecraft data on low energy He atoms to evaluate the effects of solar maxima on cosmic ray modulation. The investigation is constrained to the modulation of 70-95 MeV He-4 nuclei and 600-1000 MeV electrons over the period 1965-1984, an interval covering solar maxima in 1970 and 1981. It is shown that the occurrences of solar maxima are associated with magnetic field polarity reversals. When the interplanetary magnetic field reverses polarity, oppositely charged particles flow in different directions, thereby permitting studies of drift effects and modulation. Data on the recovery periods after the solar maxima show that the He-4 nuclei recovered before the electron population in 1970, while the situation was reversed in 1981. Actual flux ratio reversals were recorded in the years surrounding the maxima. Although the data support a connection between modulation of cosmic rays and the sign of charged particles, current models cannot account for the deviation of electron intensities from the nuclei intensities.

Garcia-Munoz, M.↗
NASA NTRS1986

A xenon ion propulsion module for enhanced spacecraft capability

Design, development and preliminary testing of a two-engine xenon ion propulsion module for early flight evaluation is described. Extensive use is made of flight spare propellant system components and also engineering model 30-cm ion engines and assemblies originally developed for the Solar Electric Propulsion System program. Significant design features include a redundant propellant feed system that incorporates a novel gas pulse assembly for rapid and completely reliable engine startup, a central neutralizer subsystem with dual neutralizers for redundancy, and major ion engine performance improvements resulting in a nearly doubling of the 30-cm engine thrust in addition to operating on xenon rather than mercury propellant. At a module input power of 10.0 kw, maximum thrust and specific impulse are projected to be 0.4 N and 3,500 sec. respectively, for a total module efficiency of 67 percent. Total mass of the xenon ion module, including the propellant tank, is only 70.2 kg. The technical approaches taken towards developing and integrating the subsystems comprising this ion propulsion module are presented and discussed in detail.

Aston, G.↗
NASA NTRS1987

Assessment Of Advanced Concentrator Photovoltaic Modules

Computer program developed to estimate probabilistically total and component costs to end users of concentrating photovoltaic arrays in 1990's. Based on modified version of SIMRAND program, Simulation of Research and Development projects, -to estimate total cost of system for large number of module designs. Module design that yields minimum cost for total system then chosen as preferred design. To obtain distribution of expected module costs, simulation performed. Component estimates made by SIMRAND include efficiency of module and costs of cell, assembly of cells, lenses, and modules. Written in FORTRAN 77.

Borden, C. S.↗