Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A fully 3-D numerical model to predict flood wave propagation and assess efficiency of flood protection measures

Discussed are the development and validation of a 3-D, non-hydrostatic, Reynolds-Averaged Navier–Stokes (RANS) model using the Volume of Fluid (VOF) approach to simulate flooding events in natural environments. A series of validation simulations in simple and complex geometries are performed to test the different modules of the flow solver. The paper also discusses the differences between simulation results obtained using the 3-D model and those obtained using a standard, 2-D hydrostatic, depth-averaged model. The predictions by the two models show fairly large differences in regions where 3-D effects are expected to be significant (e.g., in regions containing highly-curved river reaches and near hydraulic structures). Then, the validated 3-D model is employed to investigate the efficiency of using flood-protection walls to reduce adverse effects of flooding in the Iowa River near Iowa City, Iowa, USA. Finally, the propagation of a flood wave in a reach of the Iowa River containing a bridge is simulated and the effects of the flow becoming pressurized beneath the bridge deck are discussed. For such applications, in which the regime can change locally between open channel and pressurized flow, the use of fully 3-D, non-hydrostatic models may be the only viable option to accurately predict flow hydrodynamics and its effects on bed shear stresses and sediment entrainment potential, especially around locations where the flow becomes pressurized.

Water Resources↗

Numerical modeling of chemical looping oxidative dehydrogenation of ethane in parallel packed beds

Chemical looping oxidative dehydrogenation (CL-ODH) of ethane has the potential to be a highly efficient alternative to steam cracking for ethylene production. Accurate reactor modeling is of critical importance to efficiently scale up and optimize this new technology. This study reports a one-dimensional, heterogeneous packed bed model to simulate the CL-ODH of ethane to ethylene with a Na 2 MoO 4 -promoted CaTi 0.1 Mn 0.9 O 3 redox catalyst. Here, the overall reaction kinetics was well-described by coupling the gas-phase steam cracking of ethane with the reduction kinetics of the redox catalyst by H 2 and C 2 H 4 . The impact of H 2 on the formation rate of CO 2 byproduct from C 2 H 4 conversion was also thoroughly investigated to validate the applicability of the kinetic model under operational environments. The temperature variation within the different CL-ODH steps and the temperature distribution along the bed were also carefully considered. The accuracy of the model was validated by experiments conducted in a large lab-scale packed bed reactor (200 g catalyst loading), with an average deviation of 2.8% in terms of ethane conversion and ethylene yield. The model was subsequently used to optimize the operating parameters of the CL-ODH reactor, indicating that up to 63.7% single-pass C 2 +olefin yield can be achieved with the current redox catalyst bed whereas further optimization of the redox catalyst to inhibit C 2 H 4 activation can result in 69.4% single-pass C 2 +yield while maintaining low CO 2 selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

GeoMicro3D: A novel numerical model for simulating the reaction process and microstructure formation of alkali-activated slag

Highlights: • The GeoMicro3D model was innovatively developed for simulating the reaction process and microstructure formation of AAS. • In GeoMicro3D, the dissolution of slag and reactions of aqueous ions are fundamentally described in the local lattice cell. • A novel approach is proposed to speed up the nucleation simulations. • GeoMicro3D was implemented and verified with the relevant experimental data and thermodynamic calculation results. For the first time, this study developed a novel model, named GeoMicro3D, to simulate the reaction process and microstructure formation of alkali-activated slag. The GeoMicro3D model consists of four modules that are designed to simulate, respectively: (i) the initial spatial distribution of real-shape slag particles in alkaline activator, (ii) the dissolution of slag and diffusion of ions via the transition state theory and lattice Boltzmann method, respectively, (iii) the spatial distribution of reaction products using a nucleation probability theory, and (iv) the chemical reactions with thermodynamic modelling. Afterwards the GeoMicro3D model was implemented and verified. The simulation results were discussed and compared with the relevant experimental data and thermodynamic calculation results using GEMS. A good agreement was found in the comparisons, showing the strong simulation capability of GeoMicro3D.

36 MATERIALS SCIENCE↗

An integrated numerical model for coupled poro-hydro-mechanics and fracture propagation using embedded meshes

Integrated models for fluid-driven fracture propagation and general multiphase flow in porous media are valuable to the study and engineering of several systems, including hydraulic fracturing, underground disposal of waste, and geohazard mitigation across such applications. This work extends the coupled model multiphase flow and poromechanical model of Ren et al. (2018) to admit fracture propagation (FP). The coupled XFEM-EDFM scheme utilizes a separate fracture mesh that is embedded on a static background mesh. The onset and dynamics of fracture propagation are governed by the equivalent stress intensity factor (SIF) criterion. A domain-integral method (J integral) is applied to compute this information. Additionally, an adaptive time-marching scheme is proposed to rapidly restrict and grow temporal resolution to match the underlying time-scales. The proposed model is verified with analytical solutions, and shows the capability to accurately and adaptively co-simulate fluid transport and deformation as well as the propagation of multiple fractures.

42 ENGINEERING↗

An energy-dependent numerical model for the condensation probability, γ j

The “condensation” probability, γ j , is an important variable in the preequilibrium stage of nuclear spallation reactions. It represents the probability that p j excited nucleons (excitons) will “condense” to form complex particle type j in the excited residual nucleus. In addition, it has a significant impact on the emission width, or probability of emitting fragment type j from the residual nucleus. Previous formulations for γ j were energy-independent and valid for fragments up to 4 He only. This paper explores the formulation of a new model for γ j , one which is energy-dependent and valid for up to 28 Mg, and which provides improved fits compared to experimental fragment spectra.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Numerical modeling of a 2K J-T heat exchanger used in Fermilab Vertical Test Stand VTS-1

Fermilab Vertical Test Stand-1 (VTS-1) is in operation since 2007 for testing the superconducting RF cavities at 2 K. This test stand has single layer coiled finned tubes heat exchanger before J-T valve. A finite difference based thermal model has been developed in Engineering Equation Solver (EES) to study its thermal performance during filling and refilling to maintain the constant liquid level of test stand. The model is also useful to predict its performance under other various operating conditions and will be useful to design the similar kind of heat exchanger for future needs. Present paper discusses the different operational modes of this heat exchanger and its thermal characteristics under these operational modes. Results of this model have also been compared with the experimental data gathered from the VTS-1 heat exchanger and they are in good agreement with the present model.

2 Kelvin J-T Heat Exchanger↗

Numerical modeling of electromagnetic field spatiotemporal evolution to evaluate the effects on calcium carbonate crystallization

Calcium carbonate (CaCO 3 ) scaling is a significant impediment to water systems. Electromagnetic field (EMF) treatment is a promising approach to control scaling owing to its simplicity and low or no energy requirements. However, the underlying mechanisms by which EMF impacts CaCO 3 crystallization remain unclear due to the challenges in measuring the EMFs in feed solutions and the lack of a fundamental understanding of the applied EMFs and the observed physicochemical phenomena. To fill this knowledge gap, a high-fidelity COMSOL model was first developed to simulate EMFs in bulk solutions for three alternating current-induced EMF devices with different configurations and properties. These were then integrated with experimental data to unveil the underlying mechanism by which applied EMFs alter the physicochemical processes. The study revealed that even low-strength EMFs (e.g., electric fields <0.15 V/m and magnetic fields <0.03 mT) promoted CaCO 3 precipitation in bulk solutions. The electric fields created by these EMF devices resulted in higher Lorentz force compared to their induced magnetic fields. In conclusion, the methodology of this study offers the capability to predict the effectiveness of different EMF devices in facilitating crystallization processes, and these mechanistic insights lay the foundation for the smart design of EMF devices for diverse water treatment applications.

COMSOL simulation↗

Enabling fast charging of lithium-ion batteries through secondary-/dual- pore network: Part II - numerical model

To increase the market share of electric vehicles, it is desirable to reduce the battery charge times, which are significantly limited by poor electrolyte transport. A high rate charging is achievable by using expensive and low energy density cells with thin electrodes. For higher energy density cells, new electrolytes with improved conductivity and diffusivity and/or electrodes with advanced architecture are required to boost the electrolyte transport, leading to a more uniform utilization of active materials. In our previous work, an analytical model was developed to investigate the effect of secondary pore network (SPN) on electrolyte transport and the configuration of SPN was optimized by enforcing equal characteristic diffusion times in through-plane and in-plane directions. Here, to evaluate the effect of SPN on the fast-charging capability of lithium-ion batteries, a 2D physics-based electrochemical model is developed with SPN in either one or both electrodes. Additionally, the effect of SPN on cell energy density and lithium plating is investigated for cells with different loadings and electrode porosities. Combining SPN with elevated charging temperatures, the model predicts that the volumetric discharge energy density of a 3 mA h/cm2 cell can reach 270 Wh/L after a 6C constant-current charging.

25 ENERGY STORAGE↗

Numerical modeling and parametric study of a dual purpose underground thermal battery

We report integrating thermal energy storage with building energy systems can enable flexible building electric demands at buildings to help mitigate the mismatch between electricity supply and demand. A novel building heating and cooling system that integrates a dual-source heat pump with hybrid thermal storage named dual-purpose underground thermal battery (DPUTB) has been developed for reshaping building electric demands. The proposed DPUTB integrated geothermal heat pump system is an original innovation that enables Grid-interactive Energy Efficient buildings. This paper focuses on the study of the novel DPUTB. The DPUTB works as both a thermal storage tank (an inner tank) and a ground heat exchanger (an outer tank separated from the inner tank by the insulation material). High fidelity and computationally effective models are needed to predict the performance of the novel DPUTB. This study has developed a simplified dynamic model for the DPUTB according to heat transfer and energy conservation principles and validated it by using experimental data obtained from testing a small-scale DPUTB apparatus. A parametric study was conducted to identify a design that can achieve the target thermal storage performance of load shift and energy efficiency. The parametric study results show that the inner tank shell thermal conductivity and the phase change material's melting point are the two most influencing factors on the performance of the DPUTB. One single full-size DPUTB with the identified design could provide 1-ton cooling (3.51 kW) with the supply temperature lower than 11 °C for 4 hours in summer after being fully charged in 8 hours. The inner tank filled with phase change material is for cooling thermal storage as a latent tank in the design. However, its capacity can be as high as 60 MJ as a sensible water tank for heating storage in winter. In the future study, the DPUTB model will be incorporated into the dual-source heat pump system for evaluating the overall system performance of demand side management in the long term.

25 ENERGY STORAGE↗