Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

A Study into Validating a Coupled Method of Characteristics and Direct Simulation Monte Carlo Method Against Empirical Data

The following will outline the methodology and results of validating a coupled Method of Characteristics (MOC) and Direct Simulation Monte Carlo (DSMC) method. This research focused specifically on modeling plume impingement, induced by Reaction Control System (RCS) thrusters that flew on the National Aeronautics and Space Administration’s (NASA’s) space shuttle Discovery. For each simulation, the continuum portion of the RCS thruster was simulated using MOC for solving hyperbolic Partial Differential Equations (PDEs) and computed with the NASA code, Reacting and Multi-phase Program (RAMP). The solution was then implemented as a starting condition into the NASA DSMC code, Direct Simulation and Monte Carlo Analysis Code (DAC). Typically, DSMC models rely on code-to-code validation for fidelity. The significance of this research is in its ability to validate its models against empirical data. Prior to computing solutions for these simulations, the mesh size and structure were optimized and many variants of DSMC input parameters were iterated on in order to acquire a reliable, mesh-independent, fully optimized numerical solution. This research will discuss the mathematical formulation of MOC for nozzle flow and DSMC for rarefied gases. Additionally, it will provide an explanation of how to implement these mathematical concepts into the two solvers: RAMP and DAC. Ultimately, this research will demonstrate that the overall process illustrated produces results in good agreement with empirical data. As a consequence, the methodology presented is granted an increased level of confidence and will greatly contribute to the aerospace industry and its effort in understanding and predicting rarefied flow fields.

Direct Simulation Monte Carlo Analysis Code↗
NASA NTRS2021

A Study into Validating A Coupled Method of Characteristics And Direct Simulation Monte Carlo Method Against Empirical Data

The following will outline the methodology and results of validating a coupled Method of Characteristics (MOC) and Direct Simulation Monte Carlo (DSMC) method. This research focused specifically on modeling plume impingement, induced by Reaction Control System (RCS) thrusters that flew on the National Aeronautics and Space Administration’s (NASA’s) space shuttle Discovery. For each simulation, the continuum portion of the RCS thruster was simulated using MOC for solving hyperbolic Partial Differential Equations (PDEs) and computed with the NASA code, Reacting and Multi-phase Program (RAMP). The solution was then implemented as a starting condition into the NASA DSMC code, Direct Simulation and Monte Carlo Analysis Code (DAC). Typically, DSMC models rely on code-to-code validation for fidelity. The significance of this research is in its ability to validate its models against empirical data. Prior to computing solutions for these simulations, the mesh size and structure were optimized and many variants of DSMC input parameters were iterated on in order to acquire a reliable, mesh-independent, fully optimized numerical solution. This research will discuss the mathematical formulation of MOC for nozzle flow and DSMC for rarefied gases. Additionally, it will provide an explanation of how to implement these mathematical concepts into the two solvers: RAMP and DAC. Ultimately, this research will demonstrate that the overall process illustrated produces results in good agreement with empirical data. As a consequence, the methodology presented is granted an increased level of confidence and will greatly contribute to the aerospace industry and its effort in understanding and predicting rarefied flow fields.

DAC↗
NASA NTRSDate not supplied

A UNIQUE APPROACH TO ACHIEVING SIZE-CONSTRAINED QUASI-HALO ORBITS FOR THE ROMAN SPACE TELESCOPE

The Nancy Grace Roman Space Telescope (RST) is an infrared space observatory planned for launch in the mid-2020’s. The launch window design for RST is subject to a wide variety of simultaneous requirements that require careful consideration and control of mission orbits and the trajectories used to achieve them. This work describes an innovative methodology that blends classical methods with modern manifold approaches and numerical optimization to flexibly determine optimal transfers to desriable mission orbits for any day of the year.Solutions found with this highly automated strategy are gaurunteed to meet requirements by construction. Results show that RST can launch for 80% of the year using maneuvers that are well within the fuel budget, significantly reducing cost and risk to the mission

Lauren Schlenker↗
NASA NTRS2003

UCLA parallel PIC framework

The UCLA Parallel PIC Framework (UPIC) has been developed to provide trusted components for the rapid construction of new, parallel Particle-in-Cell (PIC) codes. The Framework uses object-based ideas in Fortran95, and is designed to provide support for various kinds of PIC codes on various kinds of hardware. The focus is on student programmers. The Framework supports multiple numerical methods, different physics approximations, different numerical optimizations and implementations for different hardware. It is designed with "defensive" programming in mind, meaning that it contains many error checks and debugging helps. Above all, it is designed to hide the complexity of parallel processing. It is currently being used in a number of new Parallel PIC codes.

Norton, Charles D.↗
NASA NTRS2021

A Rapid Method for Orbital Coverage Statistics with J2 Using Ergodic Theory

Quantifying long-term statistical properties of satellite trajectories typically entails time-consuming trajectory propagation. We present a fast, ergodic1 method of an- alytically estimating these for J2− perturbed elliptical orbits, broadly agreeing with trajectory propagation-based values. We extend the approach in Graven and Lo (2019)2 to estimate: (1) Satellite-ground station coverage with limited satellite field of view and ground station elevation angle with numerically optimized for- mulae, and (2) long-term averages of general functions of satellite position. This method is fast enough to facilitate real-time, interactive tools for satellite constel- lation and network design, with an approximate 1000× GPU speedup.

Lo, Martin W↗
NASA NTRSDate not supplied

Performance Analysis of Magnetohydrodynamic Drag Modulation for Actively Controlled Aerocapture at Neptune

While the Ice Giants are a top priority for flagship missions in the NASA’s near-term future, current technologies limit the scientific payload and mission timeline for future Uranian and Neptunian missions due to the need for fuel for orbit insertion maneuvers. Thus, to maximize the scientific potential of future missions, atmospheric aerocapture has been heavily researched. While atmospheric aerocapture simulations have proven enabling for capturing around Neptune, its deep atmospheric pass requires an aeroshell with robust thermal protection systems (TPS). Magnetohydrodynamically-controlled aerocapture serves as a potential solution to the limitations of both fully propulsive orbit insertion and aerodynamically controlled aerocapture. Through NASA Langley’s high-fidelity flight dynamics simulation, the Program to Optimize Simulated Trajectories II, both the aerodynamic-only and magnetohydrodynamic aerocapture methods were simulated and compared for identical missions to Neptune. After applying an optimized numerical predictor-corrector guidance algorithm for both methods, the results showed that magnetohydrodynamics has not only the control authority to successfully capture around Neptune, but also the unique advantage of a shallower atmospheric pass, decreasing the maximum heat load and the required TPS mass.

Danny N. Nguyen↗
NASA NTRS1986

Optimization methods and silicon solar cell numerical models

An optimization algorithm for use with numerical silicon solar cell models was developed. By coupling an optimization algorithm with a solar cell model, it is possible to simultaneously vary design variables such as impurity concentrations, front junction depth, back junction depth, and cell thickness to maximize the predicted cell efficiency. An optimization algorithm was developed and interfaced with the Solar Cell Analysis Program in 1 Dimension (SCAP1D). SCAP1D uses finite difference methods to solve the differential equations which, along with several relations from the physics of semiconductors, describe mathematically the performance of a solar cell. A major obstacle is that the numerical methods used in SCAP1D require a significant amount of computer time, and during an optimization the model is called iteratively until the design variables converge to the values associated with the maximum efficiency. This problem was alleviated by designing an optimization code specifically for use with numerically intensive simulations, to reduce the number of times the efficiency has to be calculated to achieve convergence to the optimal solution.

Girardini, K.↗
NASA NTRSDate not supplied

GASP Advancements With Symbolic Computations, Optimization, and Decoupled Numerical Methods

NASA is exploring advancements in hybrid-electric propulsion concepts for aircraft design. A new analysis capability has been deployed at NASA’s Ames Research Center using a new mathematical modeling framework in Python that leverages symbolic representation of mathematical expressions, optimization-based problem formulations, and standalone numerical methods. This capability, called Gascon, has been verified against NASA’s General Aviation Synthesis Program (GASP) results for several vehicles that exercise the analysis capability for a variety of aircraft classes and engine models, including both turbofans and turboprops. We believe this capability will set the stage for more rapid development of novel aircraft models with more flexible design assessments using optimization, and more traceable analysis for reproducibility. Additionally, a novel Pareto optimization-based design space exploration that shows the trade between range flown and fuel burn by manipulating the thrust split during cruise for a true parallel hybrid aircraft was developed by leveraging the unique features of Gascon.

aircraft design↗
NASA NTRS1974

An analysis of the accuracy of a parameter optimization

The numerical operations involved in a currently used optimization technique are discussed and analyzed with special attention to the numerical accuracy. Alternative methods for deriving linear system transfer functions, finding the relationships between the transfer function coefficients and the design parameters, and solving a matrix equation are presented for more accurate and cost effective solutions.

Baram, Y.↗
NASA NTRS1986

A numerical algorithm for optimal feedback gains in high dimensional LQR problems

A hybrid method for computing the feedback gains in linear quadratic regulator problems is proposed. The method, which combines the use of a Chandrasekhar type system with an iteration of the Newton-Kleinman form with variable acceleration parameter Smith schemes, is formulated so as to efficiently compute directly the feedback gains rather than solutions of an associated Riccati equation. The hybrid method is particularly appropriate when used with large dimensional systems such as those arising in approximating infinite dimensional (distributed parameter) control systems (e.g., those governed by delay-differential and partial differential equations). Computational advantage of the proposed algorithm over the standard eigenvector (Potter, Laub-Schur) based techniques are discussed and numerical evidence of the efficacy of our ideas presented.

Banks, H. T.↗
NASA NTRS1991

A numerical algorithm for optimal feedback gains in high dimensional linear quadratic regulator problems

A hybrid method for computing the feedback gains in linear quadratic regulator problem is proposed. The method, which combines use of a Chandrasekhar type system with an iteration of the Newton-Kleinman form with variable acceleration parameter Smith schemes, is formulated to efficiently compute directly the feedback gains rather than solutions of an associated Riccati equation. The hybrid method is particularly appropriate when used with large dimensional systems such as those arising in approximating infinite-dimensional (distributed parameter) control systems (e.g., those governed by delay-differential and partial differential equations). Computational advantages of the proposed algorithm over the standard eigenvector (Potter, Laub-Schur) based techniques are discussed, and numerical evidence of the efficacy of these ideas is presented.

Banks, H. T.↗
NASA NTRS1982

Numerical modeling and optimization of polymer melt processing operations

The application of finite element computer analyses to polymer flows of the type encountered in melt processing operations is described. A code capable of predicting values of fluid veleocity, pressure, shear stress, and temperature at any point within the flow field was developed. As such, is is of value in diagnosing such processing problems as regions of fluid stagnation at which thermal degradation may occur, or regions of excessive shear deformation which lead to thermomechanical damage. It is further able to generate predictions of the forces which must be applied to the melt to achieve the desired flow, and this information is of value in designing processing equipment of optimal efficiency and minimum energy consumption.

Roylance, D.↗