Search NASA⌕ Search

SEARCH · Search NASA

Results for “Overview”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

An overview of the small engine component technology (SECT) studies

The objectives of the joint NASA/Army SECT studies were to identify high payoff technologies for year 2000 small gas turbine engine applications and to provide a technology plan for guiding future research and technology efforts applicable to rotorcraft, commuter and general aviation aircraft and cruise missiles. Competitive contracts were awarded to Allison, AVCO Lycoming, Garrett, Teledyne CAE and Williams International. This paper presents an overview of the contractors' study efforts for the commuter, rotorcraft, cruise missile, and auxiliary power (APU) applications with engines in the 250 to 1,000 horsepower size range. Reference aircraft, missions and engines were selected. Advanced engine configurations and cycles with projected year 2000 component technologies were evaluated and compared with a reference engine selected by the contractor. For typical commuter and rotorcraft applications, fuel savings of 22 percent to 42 percent can be attained. For $1/gallon and $2/gallon fuel, reductions in direct operating cost range from 6 percent to 16 percent and from 11 percent to 17 percent respectively. For subsonic strategic cruise missile applications, fuel savings of 38 percent to 54 percent can be achieved which allows 35 percent to 60 percent increase in mission range and life cycle cost reductions of 40 percent to 56 percent. High payoff technologies have been identified for all applications.

Vanco, M. R.↗
NASA NTRS1986

Overview of the 1986 free-piston Stirling SP-100 activities at the NASA Lewis Research Center

An overview of the NASA Lewis Research Center SP-100 free-piston Stirling engine activities is presented. These activities include a free-piston Stirling space-power technology feasibility demonstration project as part of the SP-100 program being conducted in support of the Department of Defennse (DOD), Department of Energy (DOE), and NASA. The space-power Stirling advanced technology effort, under SP-100, addresses the status of the 25 kWe Space Power Demonstrator Engine (SPDE) including test results. Future space-power projections are presented along with a description of a study that will investigate the feasibility of scaling a single-cylinder free-piston Stirling space-power module to the 150 kW power range. Design parameters and conceptual design features will be presented for a 25 kWe, single-cylinder free-piston Stirling space-power converter. A description of a hydrodynamic gas bearing concept is presented whereby the displacer of a 1 kWe free-piston Stirling engine is modified to demonstrate the bearing concept. And finally the goals of a conceptual design for a 25 kWe Solar Advanced Stirling Conversion System capable of delivering electric power to an electric utility grid are discussed.

Slaby, J. G.↗
NASA NTRS1986

An overview of NASA's programs and plans

An overview is given of NASA's technical program offices and their status, recent accomplishments, and plans for the future. Programs covered include the Space Transportation System, TDRS, the Deep Space Network, the various Spacelab missions, the Galileo mission to Jupiter, the Ulysses mission over the poles of the sun, the Hubble Space Telescope, and the Space Station program.

Keller, S. W.↗
NASA NTRS1987

Space Station overview

This paper presents an overview of the Space Station, including program guidelines, international involvement, current baseline configuration, and utilization for science and application missions. Space Station configuration and capabilities, plus methods of utilizing the Space Station for scientific and engineering investigations, are described. The Space Station is being designed as a multipurpose facility to support a number of functions, such as a laboratory in space, a transportation node, an assembly facility, a staging base, etc. The description includes the baseline configuration, location of the pressurized modules, servicing and assembly facilities, and the work package structure for Space Station management. The Space Station will accommodate a wide variety of user requirements in laboratory modules and as attached payloads. To show the utility of the Space Station, a variety of science and application missions currently being studied for NASA at the Marshall Space Flight Center are discussed.

De Sanctis, Carmine E.↗
NASA NTRS1987

Operational overview of NASA GTE/CITE 1 airborne instrument intercomparisons - Carbon monoxide, nitric oxide, and hydroxyl instrumentation

An overview of the airborne intercomparisons of CO, NO, and OH instrumentation is presented in this first paper of the series on the NASA Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation (GTE/CITE 1). This paper provides the reader with background information about several important characteristics of the project. These include the overall objectives and approach, the measurements taken, the intercomparison protocol, aircraft platform, profiles of each aircraft flight, and the participants. A synopsis of the overall results of the CO, NO, and OH instrument intercomparisons is also included. Companion papers discuss the detailed results of the CO and NO intercomparison tests as well as pertinent scientific findings.

Beck, Sherwin M.↗
NASA NTRS1987

The Space Station overview

This paper is an overview of the Space Station status and activities being undertaken by NASA in cooperation with Canada, the European Space Agency and Japan. A review of the progress within the past year including user requirements, design baseline, operations concept and program planning is covered. Discussion of design decisions and recent changes in the management organization are highlighted. Of special importance is discussion of the Space Station utilization with focus on insuring that the design requirements are responsive to user needs and consistent with life cycle cost. A preliminary operations concept is explored, and options for evolving the Space Station identified.

Hodge, John D.↗
NASA NTRS1987

The planned Alaska SAR Facility - An overview

The Alaska SAR Facility (ASF) is described in an overview fashion. The facility consists of three major components, a Receiving Ground System, a SAR Processing System and an Analysis and Archiving System; the ASF Program also has a Science Working Team and the requisite management and operations systems. The ASF is now an approved and fully funded activity; detailed requirements and science background are presented for the facility to be implemented for data from the European ERS-1, the Japanese ERS-1 and Radarsat.

Carsey, Frank↗
NASA NTRS1986

HiMAT flight program: Test results and program assessment overview

The Highly Manueverable Aircraft Technology (HiMAT) program consisted of design, fabrication of two subscale remotely piloted research vehicles (RPRVs), and flight test. This technical memorandum describes the vehicles and test approach. An overview of the flight test results and comparisons with the design predictions are presented. These comparisons are made on a single-discipline basis, so that aerodynamics, structures, flight controls, and propulsion controls are examined one by one. The interactions between the disciplines are then examined, with the conclusions that the integration of the various technologies contributed to total vehicle performance gains. An assessment is made of the subscale RPRV approach from the standpoint of research data quality and quantity, unmanned effects as compared with manned vehicles, complexity, and cost. It is concluded that the RPRV technique, as adopted in this program, resulted in a more complex and costly vehicle than expected but is reasonable when compared with alternate ways of obtaining comparable results.

Deets, Dwain A.↗
NASA NTRS1987

Overview of STIP intervals 15-19

Five STIP Intervals for special scientific study of solar and interplanetary phenomena were designated between February 1984 and March 1986. The first two intervals were selected retrospectively after unusual periods of solar activity; the remaining three intervals were selected in advance in conjunction with anticipated spacecraft configurations and measurements. In this overview the historical background of these STIP Intervals and a summary of the rationale in the selection of these particular time periods for concentrated studies are presented.

Shea, M. A.↗
NASA NTRS1987

An overview of STIP interval 18: September 1985, the G-Z encounter

The primary period of interest during September 1985 is the few days surrounding the ICE encounter with comet Giacobini-Zinner(G-Z) which occurred at 1102 UT on 11 September. To place into perspective the actual in situ observations measured during the comet encounter it is necessary to understand the prevailing solar and interplanetary conditions. Starting two solar rotations prior to and extending through the rotation after the encounter the interplanetary stream structure was very uniform, similar to the 1973-4 long-lived structure. Prior to the arrival of the corotating high-speed stream at 5 UT on 11 September, ICE was already measuring the effects of G-Z on the surrounding interplanetary medium. An overview of available solar, interplanetary, and ICE data for the cometary interval is presented.

Zwickl, R. D.↗
NASA NTRS1987

Overview of free-piston Stirling engine technology for space power application

An overview is presented of free-piston Stirling engine activities, directed toward space power applications. One of the major elements of the program is the development of advanced power conversion. Under this program the status of the 25 kWe opposed-piston Space Power Demonstrator Engine (SPDE) is presented. Initial differences between predicted and experimental power outputs and power output influenced by variations in regenerators are discussed. Technology work was conducted on heat-exchanger concepts to minimize the number of joints as well as to enhance the heat transfer in the heater. Design parameters and conceptual design features are also presented for a 25 kWe, single-cylinder free-piston Stirling space power converter. Projections are made for future space power requirements over the next few decades along with a recommendation to consider the use of dynamic power conversion systems, either solar or nuclear. A cursory comparison is presented showing the mass benefits of a Stirling system over a Brayton system for the same peak temperature and output power. A description of a study to investigate the feasibility of scaling a single-cylinder free-piston Stirling space power module to the 150 kWe power range is presented.

Slaby, Jack G.↗
NASA NTRS1987

Aircraft engine hot section technology: An overview of the HOST Project

NASA sponsored the Turbine Engine Hot Section Technology (HOST) Project to address the need for improved durability in advanced aircraft engine combustors and turbines. Analytical and experimental activities aimed at more accurate prediction of the aerothermal environment, the thermomechanical loads, the material behavior and structural responses to loads, and life predictions for cyclic high-temperature operation were underway for the last 7 years. The project has involved representatives from six engineering disciplines who are spread across three work sectors (industry, academia, and NASA). The HOST Project not only initiated and sponsored 70 major activities, but was also the keystone in joining the multiple disciplines and work sectors to focus on critical research needs. A broad overview of the project is given along with initial indications of the project's impact.

Sokolowski, Daniel E.↗
NASA NTRS1987

Supersonic STOVL propulsion technology program: An overview

Planning activities are continuing between NASA, DOD, and two foreign governments to develop the technology and to demonstrate the design capability for advanced, supersonic, short-takeoff and vertical-landing (STOVL) aircraft by the mid-1990s. As a result, a Memorandum of Understanding (MOU) was established by the United Kingdom to jointly pursue the required technology; and an MOU with Canada is expected to be signed shortly. The NASA Lewis Research Center will play a lead role in the development of the required propulsion technologies which were identified as being critical to achieve viable STOVL aircraft. These planning activities have already resulted in initial research programs focused on technologies common to two or more of the proposed propulsion system concepts. An overview of the Lewis Research Center's role in the overall program plan and recent results in the development of the required propulsion technologies is presented.

Blaha, Bernard J.↗
NASA NTRS1987

Cryogenics program overview

An overview of the cryogenics program of the Goddard Space Flight Center is given in viewgraph form. Goddard's role and the flight programs requiring cryogenics are outlined. Diagrams are given of the Cosmic Background Explorer, the Broad Band X-Ray Telescope, the Hubble Space Telescope, an adiabatic demagnetization refrigerator, a liquid cryogenic cooler for the Shuttle Glow Experiment, a liquid helium dewar, and the X-ray spectrometer on the Advanced X-Ray Astrophysics Facility.

Castles, Stephen H.↗
NASA NTRS1987

LeRC cryogenic fluid management program overview

An overview is given of the Lewis Research Center's cryogenic fluid management program in the form of viewgraphs. Objectives, approach, program elements, cost analysis, modeling, and flight experiment development are outlined.

Symons, E. P.↗
NASA NTRS1987

Orbital transfer vehicle studies overview

An overview is given in viewgraph form of orbital transfer vehicle concept definition and systems analysis studies. Project development flow charts are shown for key milestones from 1985 until 1997. Diagrams of vehicles are given. Information is presented in outline form on technology requirements, cooling of propellant tanks, cryogenic fluid management, quick connect/disconnect fluid interfaces and propellant mass transfer.

Perkinson, Don↗
NASA NTRS1987

Lewis materials research and technology: An overview

The Materials Division at the Lewis Research Center has a long record of contributions to both materials and process technology as well as to the understanding of key high-temperature phenomena. An overview of the division staff, facilities, past history, recent progress, and future interests is presented.

Grisaffe, Salvatore J.↗