Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE DEVIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Simultaneous X-ray and optical observations of the 7.7 second X-ray pulsar 4U 1626-67

Simultaneous X-ray and optical observations of the 7.7-s X-ray pulsar 4U 1626-67, obtained during May 29-31, 1978, reveal the presence of (1) intense, correlated optical and X-ray flares and (2) 7.7-s optical pulsations which agree in phase with the 1-3 keV X-ray pulsations to within 0.5 s (two standard deviations) and which agree in period to within 0.001 s (one standard deviation). From these data it is concluded that a substantial fraction (a minimum of 8%) and possibly all of the optical emission is produced from within approximately 0.5 light sec or 1.5 x 10 to the 10th cm of the neutron star. Furthermore, the data rule out the possibility that this optical emission comes from the X-ray heated surface of a degenerate or nondegenerate dwarf companion. It most likely comes from an accretion disk.

Mcclintock, J. E.↗
NASA NTRS1983

Statistical mechanics of light elements at high pressure. V Three-dimensional Thomas-Fermi-Dirac theory

A numerical technique for solving the Thomas-Fermi-Dirac (TED) equation in three dimensions, for an array of ions obeying periodic boundary conditions, is presented. The technique is then used to calculate deviations from ideal mixing for an alloy of hydrogen and helium at zero temperature and high presures. Results are compared with alternative models which apply perturbation theory to calculation of the electron distribution, based upon the assumption of weak response of the electron gas to the ions. The TFD theory, which permits strong electron response, always predicts smaller deviations from ideal mixing than would be predicted by perturbation theory. The results indicate that predicted phase separation curves for hydrogen-helium alloys under conditions prevailing in the metallic zones of Jupiter and Saturn are very model dependent.

Macfarlane, J. J.↗
NASA NTRS1984

Asteroid Lightcurve Inversion

The application of convex profile inversion (CPI) to the interpretation of asteroid lightcurves is discussed. This technique investigates the problem of extracting information about an asteroid's shape from its lightcurve. Whenever four ideal conditions are met, P is an estimator for the asteroids mean cross section C, a convex set defined as the average of all cross sections C(Z) cut by planes a distance z above the asteroids equatorial plane. C is therefore a 2-D average of the asteroids 3-D shape. The method is tested by inverting lightcurves generated analytically for geometrically scattered ellipsoids (GSE's) with semiaxes a or = B or = C. Using a defined 'distance measure' to quantify the difference between any two profiles, the deviation of P from C for GSE's as a function of lightcurve noise level, rotation phase sampling interval delta theta, and departure from ideal conditions is calibrated. The distance between P and a circle provides a gauge of the asteroid's nonsphericity and incorporates all the information contained in the lightcurve.

Ostrow, S. J.↗
NASA NTRS1998

Use of Microgravity to Control the Microstructure of Eutectics

This grant began in June of 1996. Its long term goal is to be able to control the microstructure of directionally solidified eutectic alloys, through an improved understanding of the influence of convection. The primary objective of the present projects is to test hypotheses for the reported influence of microgravity on the microstructure of three fibrous eutectics (MnBi-Bi, InSb-NiSb, Al3Ni-Al). A secondary objective is to determine the influence of convection on the microstructure of other eutectic alloys. Two doctoral students and a masters student supported as a teaching assistant were recruited for this research. Techniques were developed for directional solidification of MnBi-Bi eutectics with periodic application of current pulses to produce an oscillatory freezing rate. Image analysis techniques were developed to obtain the variation in MnBi fiber spacing, which was found to be normally distributed. The mean and standard deviation of fiber spacing were obtained for several freezing conditions. Eighteen ampoules were prepared for use in the gradient freeze furnace QUELD developed at Queen's University for use in microgravity. Nine of these ampoules will be solidified soon at Queen's in a ground-based model. We hope to solidify the other nine in the QUELD that is mounted on the Canadian Microgravity Isolation Mount on MIR. Techniques are being developed for directional solidification of the Al-Si eutectic at different freezing rates, with and without application of accelerated crucible rotation to induce convection. For the first time, theoretical methods are being developed to analyze eutectic solidification with an oscillatory freezing rate. In a classical sharp-interface model, we found that an oscillatory freezing rate increases the deviation of the average interfacial composition from the eutectic, and increases the undercooling of the two phases by different amounts. This would be expected to change the volume fraction solidifying and the fiber spacing. Because of difficulties in tracking the freezing interfaces of the two solid phases, a phase-field model is also being developed. A paper demonstrating application of phase field methods to periodic structures has been submitted for publication.

Wilcox, William R.↗
NASA NTRS2003

'Heat from Above' Heat Capacity Measurements in Liquid He-4

We have made heat capacity measurements of superfluid He-4 at temperatures very close to the lambda point, T(sub lambda) , in a constant heat flux, Q, when the helium sample is heated from above. In this configuration the helium enters a self-organized (SOC) heat transport state at a temperature T(sub SOC)(Q), which for Q greater than or = 100 nW/sq cm lies below T(sub lambda). At low Q we observe little or no deviation from the bulk Q = 0 heat capacity up to T(sub SOC)(Q); beyond this temperature the heat capacity appears to be sharply depressed, deviating dramatically from its bulk behaviour. This marks the formation and propagation of a SOC/superfluid two phase state, which we confirm with a simple model. The excellent agreement between data and model serves as an independent confirmation of the existence of the SOC state. As Q is increased (up to 6 micron W/sq cm) we observe a Q dependant depression in the heat capacity that occurs just below T(sub SOC)(Q), when the entire sample is still superfluid. This is due to the emergence of a large thermal resistance in the sample, which we have measured and used to model the observed heat capacity depression. Our measurements of the superfluid thermal resistivity are a factor of ten larger than previous measurements by Baddar et al.

Lee, R. A. M.↗
NASA NTRS2018

Orion Optical Navigation Progress Toward Exploration: Mission 1

Optical navigation of human spacecraft was proposed on Gemini and implemented successfully on Apollo as a means of autonomously operating the vehicle in the event of lost communication with controllers on Earth. It shares a history with the "method of lunar distances" that was used in the 18th century and gained some notoriety after its use by Captain James Cook during his 1768 Pacific voyage of the HMS Endeavor. The Orion emergency return system utilizing optical navigation has matured in design over the last several years, and is currently undergoing the final implementation and test phase in preparation for Exploration Mission 1 (EM-1) in 2019. The software development is being worked as a Government Furnished Equipment (GFE) project delivered as an application within the Core Flight Software of the Orion camera controller module. The mathematical formulation behind the initial ellipse fit in the image processing is detailed in Christian. The non-linear least squares refinement then follows the technique of Mortari as an estimation process of the planetary limb using the sigmoid function. The Orion optical navigation system uses a body fixed camera, a decision that was driven by mass and mechanism constraints. The general concept of operations involves a 2-hour pass once every 24 hours, with passes specifically placed before all maneuvers to supply accurate navigation information to guidance and targeting. The pass lengths are limited by thermal constraints on the vehicle since the OpNav attitude generally deviates from the thermally stable tail-to-sun attitude maintained during the rest of the orbit coast phase. Calibration is scheduled prior to every pass due to the unknown nature of thermal effects on the lens distortion and the mounting platform deformations between the camera and star trackers. The calibration technique is described in detail by Christian, et al. and simultaneously estimates the Brown-Conrady coefficients and the Star Tracker/Camera interlock angles. Accurate attitude information is provided by the star trackers during each pass. Figure 1 shows the various phases of lunar return navigation when the vehicle is in autonomous operation with lost ground communication. The midcourse maneuvers are placed to control the entry interface conditions to the desired corridor for safe landing. The general form of optical navigation on Orion is where still images of the Moon or Earth are processed to find the apparent angular diameter and centroid in the camera focal plane. This raw data is transformed into range and bearing angle measurements using planetary data and precise star tracker inertial attitude. The measurements are then sent to the main flight computer's Kalman filter to update the onboard state vector. The images are, of course, collected over an arc to converge the state and estimate velocity. The same basic technique was used by Apollo to satisfy loss-of-comm, but Apollo used manual crew sightings with a vehicle-integral sextant instead of autonomously processing optical imagery. The software development is past its Critical Design Review, and is progressing through test and certification for human rating. In support of this, a hardware-in-the-loop test rig was developed in the Johnson Space Center Electro-Optics Lab to exercise the OpNav system prior to integrated testing on the Orion vehicle. Figure 2 shows the rig, which the test team has dubbed OCILOT (Orion Camera In the Loop Optical Testbed). Analysis performed to date shows a delivery that satisfies an allowable entry corridor as shown in Figure 3.

Holt, Greg N.↗
DOE OSTI2020

The role of the spatial heterogeneity and correlation length of surface wettability on two-phase flow in a CO 2 -water-rock system

This study characterized and modeled heterogeneous surface wettability in sandstone and investigated the role of spatial heterogeneity and correlation length of surface wettability on relative permeability in a supercritical CO 2 (scCO 2 )-brine-rock system. Understanding the role of wettability heterogeneity on relative permeability is essential to geological CO 2 sequestration, oil and gas recovery, and contaminated groundwater remediation. Although numerous studies have attempted to understand the influences of surface wettability, capillary number (Ca), and viscosity ratio, the role of the spatial variation and correlation length of surface wettability on two-phase flow in three-dimensional (3D) porous media has not been unraveled due to the challenges in the measurement and representation of realistic rock surface wettability. In this work, we conducted in-situ measurements of surface contact angle (CA) in a Bentheimer sandstone after CO 2 flooding using micro-computed tomography (micro-CT), and found that the pore-scale CA distribution on rock surfaces followed a log-normal distribution associated with a spatial correlation length. Based on the statistical information from CT scanning, a Gaussian random field was used to model CA distributions that had desired standard deviations and spatial correlation lengths, which were then adjusted within a certain range of values for sensitivity analyses to study their combined effects on the two-phase flow in the porous medium using the lattice Boltzmann (LB) method. The LB two-phase flow simulation was accelerated using hybrid, multicore parallel computing to overcome the challenges in simulating multiphase flow in a large 3D domain having 800 × 800 × 600 nodes. The simulation results showed that the surface wettability heterogeneity (i.e., standard deviation of CA) had a lesser effect on the relative permeability of the wetting fluid (water) but a more significant impact on the relative permeability of the non-wetting fluid (scCO 2 ). The Corey model was used to fit the LB-simulated relative permeability curves of water and scCO 2 and showed that the variations in the relative permeability curves for both water and scCO 2 increased as the standard deviation and spatial correlation length of CA increased. This study illustrated that the assumption of homogeneous surface wettability may cause errors in multiphase flow simulations. Furthermore, the impacts of both the standard deviation and spatial correlation length of CAs should be accounted for. This is the first study that explored the spatial correlation lengths associated with CA distributions on sandstone surfaces and comprehensively investigated the roles of both spatial variation and correlation length of CA on two-phase flow properties in 3D porous media. The optimized LB multiphase flow model was proved a powerful tool to study the interplays and combined effects of these statistical parameters, which had critical applications in numerous natural and engineering processes that involved multiphase flow in porous media.

58 GEOSCIENCES↗
DOE OSTI2023

Fast-ion transport in quasisymmetric equilibria in the presence of a resonant Alfvénic perturbation

Significant progress has been made in designing magnetic fields that provide excellent confinement of the guiding-centre trajectories of alpha particles using quasisymmetry (QS). Given the reduction in this transport channel, we assess the impact of resonant Alfvén eigenmodes (AEs) on the guiding-centre motion. The AE amplitudes are chosen to be consistent with experimental measurements and large-scale simulations. We evaluate the drift resonance condition, phase-space island width and island overlap criterion for quasisymmetric configurations. Kinetic Poincaré plots elucidate features of the transport, including stiff transport above a critical perturbation amplitude. Our analysis highlights key departures from the AE-driven transport in tokamaks, such as the avoidance of phase-space island overlap in quasihelical configurations and the enhanced transport due to wide phase-space islands in low magnetic shear configurations. In configurations that are closer to QS, with QS deviations $\delta B/B_0 \lesssim 10^{-3}$ , the transport is primarily driven by the AE, while configurations that are further from QS, $\delta B/B_0 \sim 10^{-2}$ , experience significant transport due to the QS-breaking fields in addition to the AE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Double-Crucible Vertical Bridgman Technique for Stoichiometry-Controlled Chalcogenide Crystal Growth

Precise stoichiometry control in single-crystal growth is essential for both technological applications and fundamental research. However, conventional growth methods often face challenges such as non-stoichiometry, compositional gradients, and phase impurities, particularly in non-congruent melting systems. Even in congruent melting systems like Bi₂Se₃, deviations from the ideal stoichiometric composition can lead to significant property degradation, such as excessive bulk conductivity, which limits its topological applications. In this study, we introduce the double-crucible vertical Bridgman (DCVB) method, a novel approach that enhances stoichiometry control through the combined use of continuous source material feeding, traveling-solvent growth, and liquid encapsulation, which suppresses volatile element loss under high pressure. Using Bi₂Se₃ as a model system, we demonstrate that crystals grown via DCVB exhibit enhanced stoichiometric control, significantly reducing defect density and achieving much lower carrier concentrations compared to those produced by conventional Bridgman techniques. Moreover, the continuous feeding of source material enables the growth of large crystals. As a result, this approach presents a promising strategy for synthesizing high-quality, large-scale crystals, particularly for metal chalcogenides and pnictides that exhibit challenging non-congruent melting behaviors.

Crystal structure↗
DOE OSTI2021

Investigation of turbulent inflow specification in Euler–Lagrange simulations of mid-field spray

The process of atomization of a liquid jet by a parallel high-speed gas stream results in a spray, whose downstream development is of considerable interest to several applications. The round jet spray can be spatially divided into (i) a near-field (near-nozzle) region of liquid atomization and (ii) a downstream mid-field region of fully-dispersed droplets. In order to accurately model mid-field droplet dispersion, this work aims at developing a rigorous and robust injection model for Euler–Lagrange spray simulations. Results from experiments are used to obtain the relevant droplet number density, size distribution, and mean and standard deviation velocity distributions of the injection model, systematically in a step-by-step process. Two-phase large eddy simulations are performed by stochastically generating the Lagrangian droplets at the inlet of the mid-field region. Number flux, diameter distribution, mean velocity, and other time-averaged statistics at several downstream locations are shown to agree well with the corresponding experimental data.

42 ENGINEERING↗
DOE OSTI2020

Frequency transfer via an ultra-stable free-space link

An optical frequency transfer at a wavelength of 1542 nm via an ultra-stable 5-m free-space link with active compensation of the phase noise caused by atmospheric fluctuations is demonstrated. The link-induced phase noise and its contribution to the frequency transfer instability are investigated. It is shown that, with the phase compensation system switched on, the link contribution to the relative transfer instability in terms of Allan deviation reaches 1.7 × 10{sup −19} for a 5000-s averaging time. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Modelling the Alfvén eigenmode induced fast-ion flow measured by an imaging neutral particle analyzer

An imaging neutral particle analyzer (INPA) provides energy and radially resolved measurements of the confined fast-ion population ranging from the high-field side to the edge on the midplane of the DIII-D tokamak. In recent experiments, it was used to diagnose fast-ion flow in the INPA-interrogated phase-space driven by multiple, marginally unstable Alfvén eigenmodes (AEs). Here, the key features of this measured fast-ion flow are: (I) a fast-ion flow from q min and the injection energy (81 keV) towards lower energies and plasma periphery.(II) A flow from the same location towards higher energies and the plasma core, (III) a phase-space 'hole' at the injected energy and plasma core and (IV) a pile-up at the plasma core at lower energies (~60 keV). Ad hoc energetic particle diffusivity modelling of TRANSP significantly deviates from the observation. Comparably, a reduced modelling, i.e. a combination of NOVA-K and ASCOT5 code with the measured mode structure and amplitude, generally reproduce some key features of the observed phase-space flow, but largely failed to interpret fast ion depletion near the plasma axis. At last, self-consistent, first-principle multi-phase hybrid simulations that include realistic neutral beam injection and collisions are able to reproduce most features of the time-resolved phase-space flow. During consecutive hybrid phases, an RSAE consistent with the experiment grows and saturates, redistributing the injected fast ions. The resulting synthetic INPA images are in good agreement with the measurement near the injection energy. The simulations track the fast-ion redistribution within the INPA range, confirming that the measured fast-ion flow follows streamlines defined by the intersection of phase-space surfaces of constant magnetic moment μ and constant E' = nE + ωP φ , where n and ω are the instability toroidal mode number and frequency, and E and P φ the ion energy and toroidal canonical momentum. Nonperturbative effects are required to reproduce the depletion of fast ions near the magnetic axis at the injection energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Interaction Effects on the Dynamical Anderson Metal-Insulator Transition Using Kicked Quantum Gases

Understanding the interplay of interaction and disorder in quantum transport poses long-standing scientific challenges for theory and experiment. While highly controlled ultracold atomic platforms combining atomic interactions with spatially disordered lattices have led to remarkable advances, the extension of such controlled studies to phenomena in high-dimensional disordered systems, such as the three-dimensional Anderson metal-insulator transition has been limited. Kicked quantum gases provide an alternate experimental platform that captures the Anderson model in momentum space and features dynamical localization as the analog of Anderson localization. Here, we utilize a momentum space lattice platform using quasiperiodically kicked ultracold atomic gases to experimentally investigate interaction effects on the three-dimensional dynamical Anderson metal-insulator transition. Here, we observe interaction-driven subdiffusion and a divergence of delocalization onset time on approaching the phase boundary. Mean-field numerical simulations show qualitative agreement with experimental observations, but with significant quantitative deviations.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1974

High-dispersion spectroscopic observations of Venus during 1968 and 1969 II. The carbon-dioxide band at 8689A

Thirty well-exposed photographic plates showing the spectrum of the carbon dioxide band at 8689A in the atmosphere of Venus were obtained during 1968 and 1969. All spectra were obtained at a dispersion of 2 A/mm for Venus phase angles varying from 10 deg. to 126 deg. Rotational temperatures ranging from 236 K to 274 K were found. The average value of the rotational temperature is 246 + or - 1 K (one standard deviation); for 1967 observations, the rotational temperatures ranged from 222 to 248 K, with an average value of 238 + or - 4 K. The variation of the equivalent width of the 8689A band, with Venus phase angle, was very similar for the two sets of observations (53 plates). The temporal variations, of approximately 30 percent, were comparable with the phase variations over this limited range of phase angle.

Schorn, R. A. J.↗
NASA NTRS1985

Spectral and other physicochemical properties of submicron powders of hematite (alpha-Fe2O3), maghemite (gamma-Fe2O3), magnetite (Fe3O4), goethite (alpha-FeOOH), and lepidocrocite (gamma-FeOOH)

The spectral properties (0.35-2.20 microns) of submicron powders of hematite, maghemite, magnetite, goethite, and lepidocrocite are determined. Other physicochemical data are obtained for the powders in order to determine if deviations from stoichiometry occur due to their small particle size, to determine their state of chemical and phase purity, and to determine the physical characteristics of the individual powders. The physicochemical data obtained include mean particle diameter, discrete particle shape, chemical composition, crystallographic phase, magnetic parameters, and Moessbauer parameters. The positions of the spectral features for the hematite, maghemite, and magnetite powders are independent of temperature over the interval between about +20 and -110 C. For the goethite and lepidocrocite powders, a small shift of about 0.02 micron to shorter wavelengths is observed for some of the features after cooling to about -110 C. The spectral properties of the iron oxides and oxyhydroxides are important not only for understanding the basic physics and chemistry of the compounds but also for applications such as the remote sensing of the earth and Mars.

Morris, R. V.↗
NASA NTRS1999

Highlights of Part I: Propagation Through Mars Environment: Propagation through Mars Environment - Part 1

We recommend using the dayside Martian ionosphere as a reflector for global communication, because it has a stable density peak and usable critical frequency. This is very crucial for the future Mars ground to ground communication. The dayside ionosphere has been well modeled as a Chapman layer. We suggest performing the Martian nightside ionosphere modeling study. Because the nightside ionosphere has very little measurements available, we propose to drop a digital ionosound instrument into the Mars surface for data collection. Even though the Martian tropospheric radio refractivity had a small value, it still can cause ray bending and multipath effects. We recommend performing an accurate calculation on excess phase and group delays (range and time delays). Other effects, such as range rate errors, appearance angle deviation, defocusing loss on Mars, etc. should be estimated. Ice depolarization effects due to Martian clouds on radio waves are unknown yet, but they are expected to be small, because of lower optical depth and the thinner layer of cloud. Total Martian atmospheric gaseous attenuation is expected to be less than 1 dB on microwaves and, because the Martian atmosphere had very low concentration in uncondensed H2O and O2. An accurate calculation for zenith opacity requires the information about scale heights of H2O and O2 distribution. An accurate water vapor altitude profile at Mars is not available et. Under the normal condition, CO2 and N2 gases ddo not have electric or magnetic dipoles and do not absorb electromagnetic energy from the waves. However, they may generate the dipoles through a collision and interact with waves under a high density condition and absorb electromagnetic waves in the infrared and visible band. Dust storm is the most dominant factor on the radio wave attenuation. Large Martian dust storms can cause at least 3 dB or higher loss to Ka band wave. For a normal dust storm, the attenuation is about 1 dB. The attenuation much depends on dust mass loading, dust size distribution, etc. Most large dust storms occur in the southern hemisphere during later spring and early summer when the southern hemisphere becomes suddenly hot.

Ho, Christian↗
NASA NTRS1999

IMF Length Scales and Predictability: The Two Length Scale Medium

We present preliminary results from a systematic study using simultaneous data from three spacecraft, Wind, IMP 8 (Interplanetary Monitoring Platform) and Geotail to examine interplanetary length scales and their implications on predictability for magnetic field parcels in the typical solar wind. Time periods were selected when the plane formed by the three spacecraft included the GSE (Ground Support Equipment) x-direction so that if the parcel fronts were strictly planar, the two adjacent spacecraft pairs would determine the same phase front angles. After correcting for the motion of the Earth relative to the interplanetary medium and deviations in the solar wind flow from radial, we used differences in the measured front angle between the two spacecraft pairs to determine structure radius of curvature. Results indicate that the typical radius of curvature for these IMF parcels is of the order of 100 R (Sub E). This implies that there are two important IMF (Interplanetary Magnetic Field) scale lengths relevant to predictability: (1) the well-established scale length over which correlations observed by two spacecraft decay along a given IMF parcel, of the order of a few tens of Earth radii and (2) the scale length over which two spacecraft are unlikely to even observe the same parcel because of its curvature, of the order of a hundred Earth radii.

Collier, Michael R.↗
NASA NTRS1999

Radio Wave Propagation for Communication on and around Mars: Highlights: Propagation Through Mars Environment - Part 1

We recommend to use the dayside Martian ionosphere as a reflector for global communication, because the dayside ionosphere has stable density peak and usable critic frequency. This is very crucial for the future Mars ground to around communication. The dayside ionosphere has been well modeled as a Chapman layer. We suggest to perform the Martian nightside ionospheric modeling study. Because the nightside ionosphere has very little measurements available, we propose to drop a digital ionosond instrument into the Mars surface for data collection. Even though the Martian tropospheric radio refractivity has small value, it still can cause the ray bending and multipath effects. We recommend to perform an accurate calculation on excess phase and group delays (range and time delays). Other effects, such as range rate errors, appearance angle deviation, defocusing loss on Mars, etc. are also needed to be estimated. Ice depolarization effects due to Martian clouds on radio waves is unknown yet, which is expected to be small, because lower optical depth and thinner layer of cloud: Total Martian atmospheric gaseous attenuation is expected to be less than 1 dB on microwaves band, because the Martian atmosphere has very low concentration in uncondensed H2O and O2. An accurate calculation for zenith opacity requires the information about scale heights of H2O and O2 distribution. An accurate water vapor altitude profile at Mars is not available yet. Under the normal condition, CO2 and N2 gases do not have electric or magnetic dipoles and do not absorb electromagnetic energy from the waves. However, they may generate the dipoles through a collision and interact with waves under a high density condition and absorb electromagnetic waves in the infrared and visible band. Dust storm is most dominant factor to the radio wave attenuation. Large Martian dust storm can cause at least 3 dB or higher loss to Ka band wave. For a normal dust storm, the attenuation is about 1 dB. The attenuation much depends on dust mass loading, dust size distribution, etc. Most large dust storm occur in the southern hemisphere during later spring and early summer when the southern hemisphere become suddenly hot.

Ho, Christian↗