Search NASA⌕ Search

SEARCH · Search NASA

Results for “Path Forward”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Combinatorial Deposition of Ultrathick Ta-W-Au-Bi High-Entropy Alloys for Next-Generation Hohlraums by Direct-Current Magnetron Sputtering

Hohlraum temperature calculations with the model by J. H. Hammer and M. D. Rosen predict a higher X-ray drive from Ta-W-Au-Bi high-entropy alloys compared to pure Au and recently developed Ta 4 Au and Au-Bi hohlraums. Here, we study the microstructure and properties of 25-75−µm-thick Ta-W-Au-Bi alloy films deposited via combinatorial direct-current magnetron sputtering. All of the films have promising physical properties, including high electrical resistivity, that satisfy the requirements for magnetically assisted inertial confinement fusion experiments. While porosity tends to increase with increasing Bi content, we also found that films with Bi content > 44 at. % exhibited densification close to the substrate/film interface and formed a single-phase alloy. In conclusion, these findings provide a potential path forward for the development of Ta-W-Au-Bi alloys for next-generation hohlraum materials.

Magnetron sputtering↗
DOE OSTI2014

Steady state scenario development with elevated minimum safety factor on DIII-D

On DIII-D, a high β scenario with minimum safety factor (q min ) near 1.4 has been optimized with new tools and shown to be a favourable candidate for long pulse or steady state operation in future devices. Furthermore, the new capability to redirect up to 5 MW of neutral beam injection (NBI) from on- to off-axis improves the ability to sustain elevated q min with a less peaked pressure profile. The observed changes increase the ideal magnetohydrodynamics (MHD) n = 1 mode β N limit thus providing a path forward for increasing the noninductive current drive fraction by operating at high β N . Quasi-stationary discharges free of tearing modes have been sustained at βN = 3.5 and β T = 3.6% for two current profile diffusion timescales (about 3 s) limited by neutral beam duration. The discharge performance has normalized fusion performance expected to give fusion gain Q ≈ 5 in a device the size of ITER. Analysis of the poloidal flux evolution and current drive balance show that the loop voltage profile is almost relaxed even with 25% of the current driven inductively, and q min remains elevated near 1.4. Our observations increase confidence that the current profile will not evolve to one unstable to a tearing mode. In preliminary tests a divertor heat flux reduction technique based on producing a radiating mantle with neon injection appears compatible with this operating scenario. 0D model extrapolations suggest it may be possible to push this scenario up to 100% noninductive current drive by raising β N . Similar discharges with q min = 1.5–2 were susceptible to tearing modes and off-axis fishbones, and with q min > 2 lower normalized global energy confinement time is observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

The 2017 Plasma Roadmap: Low temperature plasma science and technology

Journal of Physics D: Applied Physics published the first Plasma Roadmap in 2012 consisting of the individual perspectives of 16 leading experts in the various sub-fields of low temperature plasma science and technology. The 2017 Plasma Roadmap is the first update of a planned series of periodic updates of the Plasma Roadmap. The continuously growing interdisciplinary nature of the low temperature plasma field and its equally broad range of applications are making it increasingly difficult to identify major challenges that encompass all of the many sub-fields and applications. This intellectual diversity is ultimately a strength of the field. The current state of the art for the 19 sub-fields addressed in this roadmap demonstrates the enviable track record of the low temperature plasma field in the development of plasmas as an enabling technology for a vast range of technologies that underpin our modern society. At the same time, the many important scientific and technological challenges shared in this roadmap show that the path forward is not only scientifically rich but has the potential to make wide and far reaching contributions to many societal challenges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

S -factor and scattering-parameter extractions from ${}^{3}\mathrm{He}+{}^{4}\mathrm{He}{ \rightarrow }^{7}\mathrm{Be}+\gamma $

Previous studies of the reaction ${}^{3}\mathrm{He}+{}^{4}\mathrm{He}\to {}^{7}\mathrm{Be}+\gamma $ have mainly focused on providing the best central value and error bar for the S factor at solar energies. Experimental measurements of this capture reaction at higher energies, the ${}^{3}\mathrm{He}$–${}^{4}\mathrm{He}$ scattering phase shifts, as well as properties of ${}^{7}\mathrm{Be}$ and its excited state, have been used to constrain the theoretical models employed for this purpose. Here we show that much more information than was previously appreciated can be extracted from angle-integrated capture data alone. We use the next-to-leading-order (NLO) amplitude in an effective field theory (EFT) for ${}^{3}\mathrm{He}+{}^{4}\mathrm{He}\to {}^{7}\mathrm{Be}+\gamma $ to perform the extrapolation. At this order the EFT describes the capture process using an s-wave scattering length and effective range, the asymptotic properties of ${}^{7}\mathrm{Be}$ and its excited state, and short-distance contributions to the E1 capture amplitude. We extract the multi-dimensional posterior of all these parameters via a Bayesian analysis that uses capture data below 2 MeV. We find that properties of the ${}^{7}\mathrm{Be}$ ground and excited states are well constrained. The total S factor $S(0)\,={0.577}_{-0.016}^{+0.015}$ keV b, while the branching ratio for excited- to ground-state capture at zero energy, ${Br}(0)={0.406}_{-0.011}^{+0.013}$, both at 68% degree of belief. This S(0) is broadly consistent with other recent evaluations, and agrees with the previously recommended value $S(0)=0.56\pm 0.03\,\,\mathrm{keV}$ b, but has a smaller error bar. We also find significant constraints on ${}^{3}\mathrm{He}$–${}^{4}\mathrm{He}$ scattering parameters, and we obtain constraints on the angular distribution of capture gamma rays, which is important for interpreting experiments. The path forward for this reaction seems to lie with better measurements of the scattering phase shifts and S(E)'s angular dependence away from zero energy, together with better understanding of the asymptotic normalization coefficients of the ${}^{7}$Be bound states' wave functions. Lastly, data on these could further reduce the uncertainty on S(0).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Quantifying uncertainties on fission fragment mass yields with mixture density networks

Probabilistic machine learning techniques can learn both complex relations between input features and output quantities of interest as well as take into account stochasticity or uncertainty within a data set. In this initial work, we explore the use of one such probabilistic network, the mixture density network (MDN), to reproduce fission yields and their uncertainties. In this paper, we study mass yields for the spontaneous fission of 252 Cf, exploring the number of training samples needed for converged predictions, how different levels of uncertainty propagate from the training set to the MDN predictions, and how well physical constraints of the yields—such as normalization and symmetry—are upheld by the algorithm. Finally, we test the ability of the MDN to interpolate between and extrapolate beyond samples in the training set using energy-dependent mass yields for the neutron-induced fission on 235 U. The MDN provides a reliable way to include and predict uncertainties and is a promising path forward for supplementing sparse sets of nuclear data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Electron scattering and neutrino physics

Abstract A thorough understanding of neutrino–nucleus scattering physics is crucial for the successful execution of the entire US neutrino physics program. Neutrino–nucleus interaction constitutes one of the biggest systematic uncertainties in neutrino experiments—both at intermediate energies affecting long-baseline deep underground neutrino experiment, as well as at low energies affecting coherent scattering neutrino program—and could well be the difference between achieving or missing discovery level precision. To this end, electron–nucleus scattering experiments provide vital information to test, assess and validate different nuclear models and event generators intended to test, assess and validate different nuclear models and event generators intended to be used in neutrino experiments. Similarly, for the low-energy neutrino program revolving around the coherent elastic neutrino–nucleus scattering (CEvNS) physics at stopped pion sources, such as at ORNL, the main source of uncertainty in the evaluation of the CEvNS cross section is driven by the underlying nuclear structure, embedded in the weak form factor, of the target nucleus. To this end, parity-violating electron scattering (PVES) experiments, utilizing polarized electron beams, provide vital model-independent information in determining weak form factors. This information is vital in achieving a percent level precision needed to disentangle new physics signals from the standard model expected CEvNS rate. In this white paper, we highlight connections between electron- and neutrino–nucleus scattering physics at energies ranging from 10 s of MeV to a few GeV, review the status of ongoing and planned electron scattering experiments, identify gaps, and lay out a path forward that benefits the neutrino community. We also highlight the systemic challenges with respect to the divide between the nuclear and high-energy physics communities and funding that presents additional hurdles in mobilizing these connections to the benefit of neutrino programs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Theoretical tools for neutrino scattering: interplay between lattice QCD, EFTs, nuclear physics, phenomenology, and neutrino event generators

Maximizing the discovery potential of increasingly precise neutrino experiments will require an improved theoretical understanding of neutrino-nucleus cross sections over a wide range of energies. Low-energy interactions are needed to reconstruct the energies of astrophysical neutrinos from supernovae bursts and search for new physics using increasingly precise measurement of coherent elastic neutrino scattering. Higher-energy interactions involve a variety of reaction mechanisms including quasi-elastic scattering, resonance production, and deep inelastic scattering that must all be included to reliably predict cross sections for energies relevant to DUNE and other accelerator neutrino experiments. Refined nuclear interaction models in these energy regimes will also be valuable for other applications, such as measurements of reactor, solar, and atmospheric neutrinos. This manuscript discusses the theoretical status, challenges, required resources, and path forward for achieving precise predictions of neutrino-nucleus scattering and emphasizes the need for a coordinated theoretical effort involved lattice QCD, nuclear effective theories, phenomenological models of the transition region, and event generators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Roadmap on multiscale materials modeling

Modeling and simulation is transforming modern materials science, becoming an important tool for the discovery of new materials and material phenomena, for gaining insight into the processes that govern materials behavior, and, increasingly, for quantitative predictions that can be used as part of a design tool in full partnership with experimental synthesis and characterization. Modeling and simulation is the essential bridge from good science to good engineering, spanning from fundamental understanding of materials behavior to deliberate design of new materials technologies leveraging new properties and processes. This Roadmap presents a broad overview of the extensive impact computational modeling has had in materials science in the past few decades, and offers focused perspectives on where the path forward lies as this rapidly expanding field evolves to meet the challenges of the next few decades. The Roadmap offers perspectives on advances within disciplines as diverse as phase field methods to model mesoscale behavior and molecular dynamics methods to deduce the fundamental atomic-scale dynamical processes governing materials response, to the challenges involved in the interdisciplinary research that tackles complex materials problems where the governing phenomena span different scales of materials behavior requiring multiscale approaches. The shift from understanding fundamental materials behavior to development of quantitative approaches to explain and predict experimental observations requires advances in the methods and practice in simulations for reproducibility and reliability, and interacting with a computational ecosystem that integrates new theory development, innovative applications, and an increasingly integrated software and computational infrastructure that takes advantage of the increasingly powerful computational methods and computing hardware.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Ignition and pusher adiabat

In the last five years, large amounts of high quality experimental data in inertial confinement fusion (ICF) were produced at the National Ignition Facility (NIF). From the NIF data, we have significantly advanced our scientific understanding of the physics of thermonuclear (TN) ignition in ICF and identified the critical physical issues important to achieve ignition, such as implosion energetics, pusher adiabat, tamping effects in fuel confinement, and confinement time. In this article, we will present recently developed TN ignition theory and implosion scaling laws [1, 2] characterizing the thermodynamic properties of the hot spot and the TN ignition metrics at NIF. We compare our theoretical predictions with NIF data with good agreement between theory and experiments. We will also demonstrate the fundamental effects of the pusher adiabat on the energy partition between the cold shell and the hot deuterium-tritium and on the neutron yields of ICF capsules. Applications [3–5] to NIF experiments and physical explanations of the discrepancies among theory, data and simulations will be presented. In our theory, the actual adiabat of the cold DT fuel can be inferred from neutron image data of a burning capsule. With the experimentally inferred hot spot mix, the CH mix in the cold fuel could be estimated, as well as the preheat. Lastly, possible path forwards to reach high yields are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Vertical control of DIII-D discharges with strong negative triangularity

Through predictive modeling validated by a series of experiments on DIII-D, the vertical stability of low β diverted plasmas with strong negative triangularity (NT) ($\delta\sim-0.6$) is assessed. As a result of their unique magnetic geometry, NT plasmas feature larger Shafranov shifts and more elongated inner flux surfaces than positive triangularity counterparts, typically leading to enhanced vertical instability growth rates. However, coupling with the non-conformal vessel DIII-D wall reduces these growth rates to controllable values, providing a path forward for stabilizing strongly NT plasma with a diverted geometry. These discharges are used to validate GSdesign (part of the TokSys code suite) stability calculations in strong NT plasmas on DIII-D, with errors of no more than ~20% observed between modeled and experimentally measured growth rates. Additions of diagnostic noise and power supply tuning to the TokSys model are needed to accurately capture the time dependence of DIII-D NT discharges, assisting with the design of control schemes specific to the DIII-D poloidal field coils. Lastly, implications of these results on a future NT reactor are briefly described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Advances in actinide thin films: synthesis, properties, and future directions

Actinide-based compounds exhibit unique physics due to the presence of 5f electrons, and serve in many cases as important technological materials. Targeted thin film synthesis of actinide materials has been successful in generating high-purity specimens in which to study individual physical phenomena. These films have enabled the study of the unique electron configuration, strong mass renormalization, and nuclear decay in actinide metals and compounds. The growth of these films, as well as their thermophysical, magnetic, and topological properties, have been studied in a range of chemistries, albeit far fewer than most classes of thin film systems. This relative scarcity is the result of limited source material availability and safety constraints associated with the handling of radioactive materials. Here, we review recent work on the synthesis and characterization of actinide-based thin films in detail, describing both synthesis methods and modeling techniques for these materials. Further, we review reports on pyrometallurgical, solution-based, and vapor deposition methods. We highlight the current state-of-the-art in order to construct a path forward to higher quality actinide thin films and heterostructure devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Floquet control of indirect exchange interaction in periodically driven two-dimensional electron systems

We present a theory for the Ruderman–Kittel–Kasuya–Yosida (RKKY) interaction mediated by a two-dimensional (2D) electron system subjected to periodic driving. This is demonstrated for a 2D metal with two ferromagnetic chains deposited in parallel. Our calculations reveal new non-analytic features in the time-averaged spin susceptibility. For weak light–matter coupling, the RKKY interaction shows oscillations with a period tunable by the light amplitude and frequency. For stronger light–matter coupling, the interaction becomes non-oscillatory and remains purely ferromagnetic. Our findings open a path forward for realizing dynamic control of the indirect exchange interaction in 2D magnetic structures.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Fundamental factors affecting thermonuclear ignition

Recent inertial confinement fusion experiments on the National Ignition Facility (NIF) have improved performance and interpretability. These results help us address hydrodynamic efficiency, pusher adiabat, tamping, and hot-spot confinement as they pertain to criteria for ignition. Here, we present requirements for propagating burn that are stringent compared to existing literature. The effects of the pusher adiabat on the energy partition for the cold and hot DT are addressed, as well as the persistent discrepancy between the observed and simulated neutron down scattering ratio. The required energy for achieving ignition on NIF and paths forward to optimize or increase the capsule yields for given laser energy are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

MAJORANA Collaboration's Experience with Germanium Detectors

A unique way to explore the nature of the neutrino is the search for neutrinoless double beta decay (0νββ). Observation of 0νββ-decay would decisively prove that neutrinos are Majorana particles and that lepton number is violated. The Majorana Demonstrator will perform a search for 0νββ-decay in 76Ge. The experiment is currently under construction at the Sanford Underground Facility (SURF) in South Dakota, USA. The Majorana Demonstrator will use an array of 40 kg of high purity germanium detectors, up to 30 kg of which will be enriched to 86% in 76Ge, surrounded by passive and active shielding. The major goal is to demonstrate a path forward to achieving a background rate at or below 3 counts/(ROI-t-y) in the 4 keV region of interest (ROI) around the 2039 keV Q-value of the 76Ge 0νββ decay. This is required for the next generation of tonne-scale germanium-based 0νββ-decay searches that are designed to probe the neutrino mass scale in the inverted-hierarchy region. Beyond the usage of ultra-clean material and extensive shielding, a key feature to achieve a low background level is a high energy resolution to minimize the ROI and pulse-shape discrimination capability to distinguish signal from background events. These properties are provided by High Purity (HP) P-type Point Contact (PPC) germanium (Ge) detectors. By enriching the natural germanium to 87% in 76Ge the detectors can be used as source and detector simultaneously. At the time of this presentation, 30 enriched detectors with average mass of 840 g have been delivered and successfully tested at SURF. All detectors met the requirements during characterization in vendor cryostat and are now being assembled in the final Majorana Demonstrator experiment.

Mertens, S.↗
DOE OSTI2017

Background model for the Majorana Demonstrator

The Majorana Collaboration is constructing a system containing 44 kg of high-purity Ge (HPGe) detectors to demonstrate the feasibility and potential of a future tonne-scale experiment capable of probing the neutrino mass scale to ~15 meV. To realize this, a major goal of the Majorana Demonstrator is to demonstrate a path forward to achieving a background rate at or below 1 count/(ROI-t-y) in the 4 keV region of interest (ROI) around the Q-value at 2039 keV. This goal is pursued through a combination of a significant reduction of radioactive impurities in construction materials and analytical methods for background rejection, for example using powerful pulse shape analysis techniques profiting from the p-type point contact (PPC) HPGe detectors technology. The effectiveness of these methods is assessed using simulations of the different background components whose purity levels are constrained from radioassay measurements. Preliminary background results obtained during the engineering runs of the Demonstrator are presented.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Development of wind turbine blade recycling baselines in the United States

Over the past several years, the wind energy industry has received scrutiny regarding wind turbine blade (WTB) recycling due to the landfilling of WTBs caused by a lack of industrially viable recycling solutions. The amount of WTBs that will need to be recycled is set to increase in the United States as the deployment of wind energy is expected to rapidly grow to meet the nation's energy goals by 2035. While significant progress has been made worldwide, it is still unclear which WTB recycling solutions would be the most cost and energy effective within the United States for the existing fleet of wind turbines. To guide researchers and industry with a clear path forward, a range of options for WTB recycling in the United States are modeled through development of baseline scenarios and the use of formal life cycle assessment (LCA). Model data have been collected through literature review, industry engagement, and expert opinion regarding current end of life practices and considerations surrounding equipment, labor, and logistics. A detailed baseline for WTB decommissioning processes has been developed and used to assess alternative approaches, such as on-site shredding to compare the impacts on greenhouse gas (GHG) emissions. The developed LCA model and baseline scenarios for WTB recycling is used to assess the current WTB decommissioning practices in the United States along with emerging recycling pathways, including cement kiln co-processing and pyrolysis. Initial findings indicate that there are different approaches to decommissioning WTBs in the United States, each of which has unique implications for recycling. In light of this finding, additional results from the modeling will be used to better understand decommissioning practices and assist in making educated decisions on recycling pathways for the future. Throughout the analysis, focus was given to where international efforts might differ from the United States. WTB recycling is occurring worldwide, and different countries have different drivers for creating markets for recycled WTB materials. The contrasts and similarities between the United States and other countries offer insight to areas of opportunity that the United States could investigate and areas that can be readily transferred from existing solutions. By modeling and characterizing the current decommissioning practices and potential recycling solutions for the United States, a clearer vision will be created for pathways forward as to how to handle end of life WTBs to enable more efficient and cost-effective opportunities for material recovery from end-of-life WTBs.

Korey, Matt↗
DOE OSTI2024

Roadmap on basic research needs for laser technology

Motivated by the profound impact of laser technology on science, arising from an increase in focused light intensity by seven orders of magnitude and flashes so short electron motion is visible, this roadmap outlines the paths forward in laser technology to enable the next generation of science and applications. Despite remarkable progress, the field confronts challenges in developing compact, high-power sources, enhancing scalability and efficiency, and ensuring safety standards. Future research endeavors aim to revolutionize laser power, energy, repetition rate and precision control; to transform mid-infrared sources; to revolutionize approaches to field control and frequency conversion. These require reinvention of materials and optics to enable intense laser science and interdisciplinary collaboration. The roadmap underscores the dynamic nature of laser technology and its potential to address global challenges, propelling progress and fostering sustainable development. Ultimately, advancements in laser technology hold promise to revolutionize myriad applications, heralding a future defined by innovation, efficiency, and sustainability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Simulating quantum materials with digital quantum computers

Quantum materials exhibit a wide array of exotic phenomena and practically useful properties. A better understanding of these materials can provide deeper insights into fundamental physics in the quantum realm as well as advance technology for entertainment, healthcare, and sustainability. The emergence of digital quantum computers (DQCs), which can efficiently perform quantum simulations that are otherwise intractable on classical computers, provides a promising path forward for testing and analyzing the remarkable, and often counter-intuitive, behavior of quantum materials. Equipped with these new tools, scientists from diverse domains are racing towards achieving physical quantum advantage (i.e., using a quantum computer to learn new physics with a computation that cannot feasibly be run on any classical computer). The aim of this review, therefore, is to provide a summary of progress made towards this goal that is accessible to scientists across the physical sciences. We will first review the available technology and algorithms, and detail the myriad ways to represent materials on quantum computers. Next, we will showcase the simulations that have been successfully performed on currently available DQCs, emphasizing the variety of properties, both static and dynamic, that can be studied with this nascent technology. Finally, we work through two examples of how to map a materials problem onto a DQC, with full code included in the Supplementary Material. It is our hope that this review can serve as an organized overview of progress in the field for domain experts and an accessible introduction to scientists in related fields interested in beginning to perform their own simulations of quantum materials on DQCs.

97 MATHEMATICS AND COMPUTING↗