International perspectives on glass waste form development for low-level and intermediate-level radioactive waste
Not Available
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
SEARCH · Search NASA
Results for “Perspective”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Challenges in studying water fluxes within the soil-plant-atmosphere continuum: A tracer-based perspective on pathways to progress
Tracing and quantifying water fluxes in the hydrological cycle is crucial for understanding the current state of ecohydrological systems and their vulnerability to environmental change. Especially the interface between ecosystems and the atmosphere that is strongly mediated by plants is important to meaningfully describe ecohydrological system functioning. Many of the dynamic interactions generated by water fluxes between soil, plant and the atmosphere are not well understood, which is partly due to a lack of interdisciplinary research. This opinion paper reflects the outcome of a discussion among hydrologists, plant ecophysiologists and soil scientists on open questions and new opportunities for collaborative research on the topic "water fluxes in the soil-plant-atmosphere continuum" especially focusing on environmental and artificial tracers. We emphasize the need for a multi-scale experimental approach, where a hypothesis is tested at multiple spatial scales and under diverse environmental conditions to better describe the small-scale processes (i.e., causes) that lead to large-scale patterns of ecosystem functioning (i.e., consequences). Novel in-situ, high-frequency measurement techniques offer the opportunity to sample data at a high spatial and temporal resolution needed to understand the underlying processes. Here we advocate for a combination of long-term natural abundance measurements and event-based approaches. Multiple environmental and artificial tracers, such as stable isotopes, and a suite of experimental and analytical approaches should be combined to complement information gained by different methods. Virtual experiments using process-based models should be used to inform sampling campaigns and field experiments, e.g., to improve experimental designs and to simulate experimental outcomes. On the other hand, experimental data are a pre-requisite to improve our currently incomplete models. Interdisciplinary collaboration will help to overcome research gaps that overlap across different earth system science fields and help to generate a more holistic view of water fluxes between soil, plant and atmosphere in diverse ecosystems.
54 ENVIRONMENTAL SCIENCES↗
Expanding the Baseline: Community Perspectives on Equity in Land-Based Wind Energy Development and Operations
This report covers the fourth and final phase of the Wind Energy Equity Engagement Series (WEEES), a series of community listening sessions on the topic of wind energy equity. In the summer and fall of 2023, a research team at NREL partnered with community-based organizations in three different cities across the U.S. to co-design and co-host the listening sessions. These gatherings were an opportunity for community members to share their past experiences with wind energy development and envision what an equitable wind energy future could look like where they live. The NREL team qualitatively analyzed notes taken during the listening sessions to build an understanding of participants' thoughts and experiences regarding wind energy equity. The team organized the analysis according to key themes that emerged during the first three phases of WEEES, each of which has three or four relevant subthemes.
17 WIND ENERGY↗
Research Progress and Perspectives on Pre‐Sodiation Strategies for Sodium‐Ion Batteries
Sodium‐ion batteries (SIBs) with abundant elements have garnered significant attention from researches as a promise compensation to lithium‐ion batteries (LIBs). However, the large‐scale commercial application of SIBs is partially hindered by the limited initial coulombic efficiency (ICE) due to the irreversible formation of solid electrolyte interphase (SEI) and intercalation into the defects in the anode. Similar to pre‐lithiation techniques, pre‐sodiation approaches are considered to be one of the most direct and effective way to compensate for the loss of active sodium at the anode side of SIBs during the initial cycle. In this context, additional sodium ions are pre‐injected to the cathode/anode material by chemical/electrochemical methods, aiming to improve battery span life and energy density. Here, this review delves into the necessity and impact of pre‐sodiation techniques, compiling the latest research progress, for instance, self‐sacrificing cathode additives, over‐sodiated cathode materials, direct contact and solution chemical pre‐sodiation. Notably, the research mechanisms underlying solution chemical pre‐sodiation are highlighted. This comprehensive overview aims to foster a deeper understanding of the pre‐sodiation techniques and expects to provide guidance for realizing the commercial application of high energy density sodium‐ion batteries.
25 ENERGY STORAGE↗
Compute in‐Memory with Non‐Volatile Elements for Neural Networks: A Review from a Co‐Design Perspective
Abstract Deep learning has become ubiquitous, touching daily lives across the globe. Today, traditional computer architectures are stressed to their limits in efficiently executing the growing complexity of data and models. Compute‐in‐memory (CIM) can potentially play an important role in developing efficient hardware solutions that reduce data movement from compute‐unit to memory, known as the von Neumann bottleneck. At its heart is a cross‐bar architecture with nodal non‐volatile‐memory elements that performs an analog multiply‐and‐accumulate operation, enabling the matrix‐vector‐multiplications repeatedly used in all neural network workloads. The memory materials can significantly influence final system‐level characteristics and chip performance, including speed, power, and classification accuracy. With an over‐arching co‐design viewpoint, this review assesses the use of cross‐bar based CIM for neural networks, connecting the material properties and the associated design constraints and demands to application, architecture, and performance. Both digital and analog memory are considered, assessing the status for training and inference, and providing metrics for the collective set of properties non‐volatile memory materials will need to demonstrate for a successful CIM technology.
36 MATERIALS SCIENCE↗
Challenges and Perspectives in Lignin‐Derived Polyurethane Foam Synthesis
Abstract Polyurethane foams (PUFs) represent a significant segment of the polyurethane (PU) and cellular plastics industries, owing to their versatile applications and desirable properties. However, the production of PUFs heavily relies on petroleum‐derived chemicals, including polyols and isocyanates, raising critical environmental concerns. Lignin, an abundant aromatic macromolecule, offers a promising alternative for replacing petroleum‐based polyols because of its intrinsic hydroxyl groups. While efforts have been made to produce and apply various lignin‐based polyurethane foams (LPUFs), their commercialization remains limited by challenges such as low product consistency, poor technical performances, and high production costs. This study critically evaluates recent advances in the development of LPUFs, including innovative synthesis methods, functional applications, and emerging research trends. Moreover, potential strategies are discussed, such as lignin fractionation, modification, and co‐solvent assistance, for addressing the challenges. By resolving them, LPUFs could play a pivotal role in transitioning the PU industry to help achieve a circular bioeconomy.
Zhang, Mairui [Carl and Melinda Helwig Department ↗
Grid‐responsive smart manufacturing: A perspective for an interconnected energy future in the industrial sector
Abstract With the growing amount of renewable energy sources, the grid has become responsible for accounting for intermittency and the flexibility needed to utilize dynamic sources. Expensive peaking plants and energy storage systems have been proposed as ways to mitigate those problems. There is a large group of energy consumers that can respond to grid conditions. Historically, these consumers have been residential and commercial users, but with modern innovations and practices, industrial consumers have the potential to become a major player in this space. Grid‐responsive smart manufacturing can be used to utilize modern tools in manufacturing innovation as enablers for grid response. These modern tools already exist but are not widely used for industrial grid‐side energy management. This article defines grid‐responsive smart manufacturing, identifies five major barriers to its widespread implementation, and portrays the path to getting industrial users to be key players in grid stability and flexibility.
Billings, Blake W.↗
Biocatalyst discovery and design for plastics deconstruction: A multi‐scale perspective
Plastic waste accumulation poses significant environmental challenges due to a lack of economical solutions for the molecular deconstruction of diverse synthetic polymers. Biological‐based degradation offers promise but is hindered by the crystallinity, hydrophobicity, and additive complexity of plastics, which restrict biocatalyst access and activity. To address these problems, we propose a multi‐scale framework that combines detailed materials characterization, optimization of plastic‐biomolecular interfacial interactions, and enhancement of biocatalytic kinetics to develop effective plastic‐deconstructing enzymes. This approach leverages principles from reaction kinetics, transport and interfacial phenomena, and enzyme engineering to systematically address barriers across diverse plastic types. Our framework aims to accelerate the discovery and optimization of biocatalysts capable of scalable, selective, and efficient deconstruction of plastic waste. These advances hold potential to enable sustainable biological recycling and upcycling pathways, contributing to global efforts in mitigating plastic pollution and promoting circular material economies.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Comparison of DeePMD, MTP, GAP, ACE and MACE Machine‐Learned Potentials for Radiation‐Damage Simulations: A User Perspective
Accurate and efficient interatomic potentials are essential for molecular dynamics (MD) simulations of radiation damage, gas diffusion, and phase stability in complex ceramics such as LiAlO 2 , especially under extreme conditions relevant to tritium production. Here, we evaluate the performance of six machine-learned interatomic potentials (MLIPs), moment tensor potential (MTP), Gaussian approximation potential, deep potential (DeePMD), atomic cluster expansion (ACE), message-passing ACE (multilayer atomic cluster expansion (MACE) pretrained) and MACE (trained from-scratch), all trained on the same density functional theory dataset with inclusion of tritium. The MLIPs are benchmarked against traditional Buckingham and ReaxFF potentials in terms of energy accuracy, density predictions, thermal equilibration behavior, threshold displacement energy (E d ), tritium diffusivity, and computational cost. Among the models, MTP shows the best overall balance between efficiency and accuracy, with low force and energy errors and realistic E d values for Li and Al. The ACE and MACE (pretrained and trained from scratch) models exhibit high E d (>200 eV) and unphysical pair interactions. DeePMD underestimates Ed due to overly repulsive behavior even at equilibrium distances. All models over-estimate tritium diffusion but the pretrained MACE model behaves well during tritium-diffusion simulations up to 500 K, maintaining diffusivities in the physically consistent 10 −11 m 2 /s range. Finally, we quantify the computational cost of each potential in large-scale atomic/molecular massively parallel simulator, finding that only MTP is more efficient than traditional empirical potentials, while others are significantly more expensive. These findings explain the trade-offs between accuracy and computational cost in MLIP development and provide essential guidance for use in high-throughput radiation damage and gas diffusion simulations in nuclear ceramics.
74 ATOMIC AND MOLECULAR PHYSICS↗
When Is a Bond Broken? The Polarizability Perspective.
Abstract The question of when a chemical bond can be said to be broken is of fundamental chemical interest but has not been widely studied. Herein we propose that the maxima of static polarizability along bond dissociation coordinates naturally define cutoff points for bond rupture, as they represent the onset of localization of shared electron density into constituent fragments. Examples of computed polarizability maxima over the course of bond cleavage in main‐group and transition metal compounds are provided, across covalent, dative and charge‐shift bonds. The behavior along reaction paths is also considered. Overall, the static polarizability is found to be a sensitive reporter of electronic structure reorganization associated with bond stretching, and thus can serve as a metric for describing bond cleavage (or diagnose the absence of a chemical bond).
Hait, Diptarka↗
When Is a Bond Broken? The Polarizability Perspective.
Abstract The question of when a chemical bond can be said to be broken is of fundamental chemical interest but has not been widely studied. Herein we propose that the maxima of static polarizability along bond dissociation coordinates naturally define cutoff points for bond rupture, as they represent the onset of localization of shared electron density into constituent fragments. Examples of computed polarizability maxima over the course of bond cleavage in main‐group and transition metal compounds are provided, across covalent, dative and charge‐shift bonds. The behavior along reaction paths is also considered. Overall, the static polarizability is found to be a sensitive reporter of electronic structure reorganization associated with bond stretching, and thus can serve as a metric for describing bond cleavage (or diagnose the absence of a chemical bond).
Hait, Diptarka↗
Extrapolation of Efficacy from Adults to Pediatric Patients of Drugs for Treatment of Partial Onset Seizures: A Regulatory Perspective
The US Food and Drug Administration (FDA) has concluded that the efficacy of drugs approved for the treatment of partial onset seizures (POS) in adults can be extrapolated to pediatric patients 1 month of age and above and that independent efficacy trials in this pediatric population are no longer needed. This paper focuses on the dosing, pharmacokinetic (PK), exposure‐response, and clinical information that were leveraged from the approved drugs for the treatment of POS to conduct analyses that supported extrapolation of efficacy in pediatric patients. Clinical data from trials for eight drugs (levetiracetam, oxcarbazepine, topiramate, lamotrigine, gabapentin, perampanel, tiagabine, and vigabatrin) approved in both adults and pediatric patients for the treatment of POS were analyzed. Comparisons of exposures at approved doses, placebo response, and model‐based exposure‐response relationships were performed. Based on disease similarity, similar response to intervention, and similar exposure‐response relationships in adults and pediatric patients, it was concluded that extrapolation of efficacy in pediatric patients aged 1 month and above is acceptable. PK analysis to determine pediatric dose and regimens that provide drug exposure similar to that known to be effective in adult patients with POS will be required, along with long‐term open‐label safety data in pediatric patients.
Pharmacology & Pharmacy↗
Perspective on Lignin Conversion Strategies That Enable Next Generation Biorefineries
The valorization of lignin, a currently underutilized component of lignocellulosic biomass, has attracted attention to promote a stable and circular bioeconomy. Successful approaches including thermochemical, biological, and catalytic lignin depolymerization have been demonstrated, enabling opportunities for lignino-refineries and lignocellulosic biorefineries. Although significant progress in lignin valorization has been made, this review describes unexplored opportunities in chemical and biological routes for lignin depolymerization and thereby contributes to economically and environmentally sustainable lignin-utilizing biorefineries. This review also highlights the integration of chemical and biological lignin depolymerization and identifies research gaps while also recommending future directions for scaling processes to establish a lignino-chemical industry.
09 BIOMASS FUELS↗
Shock physics in warm dense matter: A quantum hydrodynamics perspective
Abstract Warm dense matter (WDM), an exotic, highly compressed state of matter between solid and plasma phases, is of high current interest, in particular for astrophysics and inertial confinement fusion. For the latter, in particular the propagation of compression shocks is crucial. The main unknown in the shock propagation in WDM is the behaviour of the electrons since they are governed by correlations, quantum and spin effects that need to be accounted for simultaneously. Here we describe the shock dynamics of the warm dense electron gas using a quantum hydrodynamic model. From the numerical hydrodynamic simulations, we observe that the quantum Bohm pressure induces shear force that weakens the formation and strength of the shock. In addition, the Bohm pressure induces an electron density response that takes the form of oscillations. This is confirmed by the theoretical analysis of the early stage of the shock formation. Our theoretical and numerical analyses allow us to identify characteristic dimensionless shock propagation parameters at which the effect of the Bohm force is important.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Single vs double atom catalyst for N 2 activation in nitrogen reduction reaction: A DFT perspective
Abstract Ammonia synthesis through electrochemical reduction of nitrogen molecules is a promising strategy to significantly reduce the energy consumption in traditional industrial process. Detailed mechanism study of multistep complex nitrogen reduction reaction is prerequisite for the design of highly efficient catalyst. Stable atomically dispersed catalyst with unique geometric and electronic structure is suitable for the mechanism clarification of such a complex reaction. In this study, d ‐block transition‐metal (TM) anchored C 2 N single layer catalyst is investigated by the density functional theory (DFT) calculation. Both single TM‐anchored single atom catalyst (SAC) and double TM‐anchored double atom catalyst (DAC) exhibit good thermodynamic stability in atomically dispersed catalyst. In the case of SACs, IVB metals (Ti, Zr, Hf) exhibit the highest reactivity and lowest overpotential. While in the case of DACs, Cr─Cr system leads to the NH 3 formation, but V─V system leads to the N 2 H 4 formation. The SACs show much lower overpotential and stronger activation of N 2 molecule than the DACs due to the different activation mechanisms: traditional σ ‐donation/ π ‐backdonation N 2 activation mechanism is found in SACs, while a new π ‐donation/π‐backdonation N 2 activation mechanism is found in the DACs. The present work demonstrates that the different catalytic effect for NRR between SAC and DAC and their corresponding electronic structure origin, which gives more insight into the single atom catalyst. image
Qian, Yumin↗
Liquid Metals for Advanced Batteries: Recent Progress and Future Perspective
ABSTRACT The shift toward sustainable energy has increased the demand for efficient energy storage systems to complement renewable sources like solar and wind. While lithium‐ion batteries dominate the market, challenges such as safety concerns and limited energy density drive the search for new solutions. Liquid metals (LMs) have emerged as promising materials for advanced batteries due to their unique properties, including low melting points, high electrical conductivity, tunable surface tension, and strong alloying tendency. Enabled by the unique properties of LMs, four key scientific functions of LMs in batteries are highlighted: active materials, self‐healing, interface stabilization, and conductivity enhancement. These applications can improve battery performance, safety, and lifespan. This review also discusses current challenges and future opportunities for using LMs in next‐generation energy storage systems. image
Zheng, Tianrui [Materials Science and Engineering ↗
Current Challenges in Efficient Lithium‐Ion Batteries’ Recycling: A Perspective
Abstract Li‐ion battery (LIB) recycling has become an urgent need with rapid prospering of the electric vehicle (EV) industry, which has caused a shortage of material resources and led to an increasing amount of retired batteries. However, the global LIB recycling effort is hampered by various factors such as insufficient logistics, regulation, and technology readiness. Here, the challenges associated with LIB recycling and their possible solutions are summarized. Different aspects such as recycling/upcycling techniques, worldwide government policies, and the economic and environmental impacts are discussed, along with some practical suggestions to overcome these challenges for a promising circular economy for LIB materials. Some potential strategies are proposed to convert such challenges into opportunities to maintain the global expansion of the EV and other LIB‐dependent industries.
25 ENERGY STORAGE↗
Revisiting the empirical particle-fluid coupling model used in DEM-CFD by high-resolution DEM-LBM-IMB simulations: A 2D perspective
The work investigates the applicability of the unresolved Computational Fluid Dynamics and Discrete Element Method (CFDDEM) technique based on empirical equations for fluid-particle coupling. We first carry out a series of representative volume element simulations using the high-resolution particle-resolved Lattice Boltzmann method and Discrete Element Method (LBMDEM) coupled by an Immersed Moving Boundary (IMB) scheme. Then, we compare the results obtained by both LBMDEM and empirical equations used in unresolved CFDDEM with analytical solutions. It is found that the existing empirical equations used in solving fluid-particle interactions in 2D CFDDEM fail to accurately calculate the hydrodynamic force applied to solid particles. The underlying reason is that the existing empirical models are obtained based on 3D experimental results and thus are not applicable to 2D problems. Based on the simulation results, a new drag coefficient model is then proposed. The estimated drag forces using the new model are compared favourably with the simulated ones, indicating the good performance of the proposed model.
42 ENGINEERING↗