Search NASA⌕ Search

SEARCH · Search NASA

Results for “Petroleum Fuels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Fuel quality processing study, volume 1

A fuel quality processing study to provide a data base for an intelligent tradeoff between advanced turbine technology and liquid fuel quality, and also, to guide the development of specifications of future synthetic fuels anticipated for use in the time period 1985 to 2000 is given. Four technical performance tests are discussed: on-site pretreating, existing refineries to upgrade fuels, new refineries to upgrade fuels, and data evaluation. The base case refinery is a modern Midwest refinery processing 200,000 BPD of a 60/40 domestic/import petroleum crude mix. The synthetic crudes used for upgrading to marketable products and turbine fuel are shale oil and coal liquids. Of these syncrudes, 50,000 BPD are processed in the existing petroleum refinery, requiring additional process units and reducing petroleum feed, and in a new refinery designed for processing each syncrude to produce gasoline, distillate fuels, resid fuels, and turbine fuel, JPGs and coke. An extensive collection of synfuel properties and upgrading data was prepared for the application of a linear program model to investigate the most economical production slate meeting petroleum product specifications and turbine fuels of various quality grades. Technical and economic projections were developed for 36 scenarios, based on 4 different crude feeds to either modified existing or new refineries operated in 2 different modes to produce 7 differing grades of turbine fuels. A required product selling price of turbine fuel for each processing route was calculated. Procedures and projected economics were developed for on-site treatment of turbine fuel to meet limitations of impurities and emission of pollutants.

Ohara, J. B.↗
DOE OSTI2020

LDRD Macromolcule Radiolysis Poster

Moving toward a circular carbon economy depends on enabling reuse of carbon-based macromolecules and increased recycling of waste products into higher value products. Macromolecules are challenging to valorize into products easily converted into liquid fuel or chemical feedstocks, due to their large and sometimes heterogeneous network of polymeric bonds. The novel aspect of this project is to show a proof of principle that radiolysis of macromolecules using “waste” radiation from energy production in the presence of radical capping donors presents an attractive opportunity to break down complex macromolecules into smaller molecules while controlling re-polymerization. This approach offers a new, cost-efficient way to utilize “waste” radiation and heat byproducts of nuclear energy production to convert a simple mixture of complex molecules into a complex mixture of small molecules, to be utilized as an energy source by the fuel industry, or to create value-added feedstocks for new polymers or commodity chemicals. Ionizing radiation can be harnessed to convert energy to molecules, adding value to low-value macromolecules as they are broken down into smaller, more easily separated feedstocks or fuels to be converted to a value-added product. This project will test 2 hypotheses. Hypothesis 1: Macromolecular materials that comprise biomass and coal or other macromolecules can be infused with radical capping donors (RCDs), and gamma irradiation of the resulting mixtures will produce ensembles of lower-molecular weight chemicals that can be more easily separated. If this expectation is realized, the conversion chemistry can be optimized by adjusting the feedstock composition, irradiation time, and choice of RCD.

02 - PETROLEUM↗
DOE OSTI2021

Process Intensification for the Biological Production of the Fuel Precursor Butyric Acid from Biomass

The production of fuels from lignocellulosic biomass is key to reduce our reliance on petroleum and to promote a sustainable bioeconomy. Butyric acid (BA) is a promising chemical precursor for the production of renewable diesel and jet fuels. BA can be biologically produced from lignocellulosic sugars. However, challenges associated with product selectivity and recovery must be overcome to achieve industrially relevant metrics. Here, we evaluate various fermentation configurations and demonstrate near-homo-butyrate production by using the biocatalyst Clostridium tyrobutyricum. We also develop an advanced in situ product recovery process based on hybrid extraction-distillation (HED-ISPR) and conduct techno-economic analyses and life cycle assessments. We demonstrate that the HED-ISPR process lowers the overall capital and operating expenses and environmental impact compared to other traditional fermentation processes. Overall, BA minimum product selling price from biomass is 55% of the current BA selling price from petroleum, a significant decrease toward viable renewable fuel production.

09 BIOMASS FUELS↗
NASA NTRS1981

Autothermal reforming of sulfur-free and sulfur-containing hydrocarbon liquids

The mechanisms by which various fuel component hydrocarbons related to both heavy petroleum and coal-derived liquids are converted to hydrogen without forming carbon were investigated. Reactive differences between paraffins and aromatics in autothermal reforming (ATR) were shown to be responsible for the observed fuel-specific carbon formation characteristics. The types of carbon formed in the reformer were identified by SEM and XRD analyses of catalyst samples and carbon deposits. From tests with both light and heavy paraffins and aromatics, it is concluded that high boiling point hydrocarbons and polynuclear aromatics enhance the propensity for carbon formation. The effects of propylene addition on the ATR performance of benzene are described. In ATR tests with mixtures of paraffins and aromatics, synergistic effects on conversion characteristics were identified. Indications that the sulfur content of the fuel may be the limiting factor for efficient ATR operation were found. The conversion and degradation effects of the sulfur additive (thiophene) were examined.

Source record↗
DOE OSTI2023

Economic impact and risk analysis of integrating sustainable aviation fuels into refineries

The growth of the aviation industry coupled with its dependence on energy dense, liquid fuels has brought sustainable aviation fuel (SAF) research to the forefront of the biofuels community. Petroleum refineries will need to decide how to satisfy the projected increase in jet fuel demand with either capital investments to debottleneck current operations or by integrating bio-blendstocks. This work seeks to compare jet production strategies on a risk-adjusted, economic performance basis using Monte-Carlo simulation and refinery optimization models. Additionally, incentive structures aiming to de-risk initial SAF production from the refiner’s perspective are explored. Results show that market sensitive incentives can reduce the financial risks associated with producing SAFs and deliver marginal abatement costs ranging between 136-182 $/Ton-CO2e.

09 BIOMASS FUELS↗
DOE OSTI2021

Microchannel Reactor for Ethanol to Butene: CRADA 503 [Abstract only]

A key challenge facing most bioprocessing operations is that multiple unit operations are required, thereby resulting in complex, energy-intensive, and expensive processes. Further, biomass transportation costs drive the need for smaller, distributed processing plants. To incorporate the smaller scales desirable for biomass, novel processes must be developed with reduced capital costs. With over 20 years of experience in the development and commercialization of microchannel reactor technology, Oregon State University will partner with Pacific Northwest National Laboratory to demonstrate a microchannel reactor with lower capital costs for an alcohol-to-jet (ATJ) process technology that is currently being commercialized by LanzaTech. Ethanol can be produced from biomass feedstocks such as LanzaTech’s proprietary biochemical process using carbon from a number of possible feedstocks; syngas generated from biomass resources (e.g., MSW, organic industrial waste, agriculture waste) or reformed biogas, or from other biomass feedstocks such as corn kernel fiber. Ethanol then undergoes catalytic dehydration to form ethylene followed by a two-step oligomerization, hydrogenation, and fractionation to control the hydrocarbon product slate to the jet-range. Successful process development aided by a market pull for low carbon aviation fuel has spurred scale-up and commercial demonstration. However, Sustainable Aviation Fuel is a very price sensitive market and improved economics through process intensification will make the current ATJ process even more attractive. Recent efforts at PNNL have culminated in the development of a new catalyst technology for the conversion of ethanol to n-butene-rich olefins. A greater than 90% conversion, total olefin selectivity of 80-90% (n-butene selectivity ~60%), and good stability over a 100 hour test duration has been demonstrated at the bench scale. Producing butene-rich olefins directly from ethanol with high yield is new and impactful because the higher olefins can be selectively oligomerized to distillate-range hydrocarbons, thus eliminating one process step from the current ATJ process. Further, coupling the severely endothermic ethanol dehydration with exothermic C-C bond formation results in more energy efficient processing. Additional intensification and energy savings will stem from incorporating this new ethanol to n-butene catalyst technology within the ATJ process implemented using a microchannel reactor platform. Due to recent advances in microchannel manufacturing methods and associated cost reductions we believe the time is right to adapt this technology toward new commercial bioconversion applications.

02 PETROLEUM↗
NASA NTRS1978

Computer model for refinery operations with emphasis on jet fuel production. Volume 2: Data and technical bases

The FORTRAN computing program predicts the flow streams and material, energy, and economic balances of a typical petroleum refinery, with particular emphasis on production of aviation turbine fuel of varying end point and hydrogen content specifications. The program has provision for shale oil and coal oil in addition to petroleum crudes. A case study feature permits dependent cases to be run for parametric or optimization studies by input of only the variables which are changed from the base case. The report has sufficient detail for the information of most readers.

Dunbar, D. N.↗
NASA NTRS1978

Computer model for refinery operations with emphasis on jet fuel production. Volume 3: Detailed systems and programming documentation

The FORTRAN computing program predicts flow streams and material, energy, and economic balances of a typical petroleum refinery, with particular emphasis on production of aviation turbine fuels of varying end point and hydrogen content specifications. The program has a provision for shale oil and coal oil in addition to petroleum crudes. A case study feature permits dependent cases to be run for parametric or optimization studies by input of only the variables which are changed from the base case.

Dunbar, D. N.↗
DOE OSTI2026

Opportunities and Challenges for Hydrotreating of Catalytic Fast Pyrolysis Oil to Fuels

Catalytic fast pyrolysis (CFP) provides a versatile platform for producing fuels to combat climate change and meet decarbonizing targets. In this contribution, we will discuss the hydroprocessing of CFP oils to a variety of fuels, including sustainable aviation fuel (SAF), diesel, and marine fuel. Both standalone and co-hydroprocessing with petroleum streams will be covered. Hydrotreating CFP oil at temperatures around 400 Degrees Celsius can produce a highly deoxygenated product with oxygen contents below the detection limit. However, the quality of fuel fractions produced has been a problem, manifesting as low octane numbers for the gasoline-range fraction and low cetane numbers for the diesel-range fraction. Incorporating an initial transition zone for hydrogenation during hydrotreating was shown to dramatically increase the diesel fraction cetane number from 24 to 45. A similar approach enabled the production of a cycloalkane-rich SAF fraction meeting key ASTM 4054 guidelines with respect to density, viscosity, heating value, volatility, freeze and flash point. Over 400 hours of hydrotreating for SAF was demonstrated with no signs of catalyst bed fouling, measured by pressure drop over the catalyst bed. Compared to other fuels, marine fuel is unique in that it does not require complete deoxygenation. We investigated the minimum hydrotreating requirements to produce fuel compatible with very low sulfur fuel oil, and the results suggested 30% reduction in hydrotreating costs for this approach. Co-hydroprocessing offers an opportunity to take advantage of refinery infrastructure and economies of scale although the operation is less flexible with respect to operating conditions. Co-hydroprocessing CFP oil with petroleum streams gave efficient deoxygenation at milder conditions (e.g. at temperatures of 320 Degrees Celsius) than required for standalone hydrotreating. Over 90% incorporation of biogenic carbon in the CFP oil was confirmed by carbon-14 analysis. Hydrotreating of CFP oil, whether by standalone or co-processing, can produce a variety of fuel cuts, whose quality can be tailored by changing process conditions. Challenges remain, including long-term catalyst performance and determining CFP oil quality requirements.

09 BIOMASS FUELS↗
DOE OSTI2022

The Signature C=C=O Stretch of Propenylketenes and Ketene Clusters [Book Chapter]

A combined experimental and theoretical approach has been used to examine the signature antisymmetric C=C=O stretch of prop-1-enylketene and prop-2-enylketene, as well as a series of ketene multimers and hydrates. Optimization and frequency calculations executed at the B3LYP/6-311G++(d,p) level of theory reveal four conformers of prop-1-enylketene and three conformers of prop-2-enylketene. These ketenes were generated via the pyrolysis of 3-pentenoic anhydride and 4-pentenoic anhydride, respectively, and isolated in low-temperature argon matrices prior to FTIR analysis. The resultant spectra display several bands consistent with B3LYP predictions. A similar computational and experimental survey of ketene multimers and hydrates, generated by the pyrolysis of acetic anhydride, has generated a list of frequencies for the antisymmetric C=C=O stretching mode. Furthermore, the results provide useful benchmarks for identification of propenylketenes in future experiments as well as insight for assigning other substituted ketenes in infrared spectra.

02 PETROLEUM↗
DOE OSTI2024

Remotely Bonded Bridging Dioxygen Ligands Enhance Hydrogen Transfer in a Silica-Supported Tetrairidium Cluster Catalyst

A longstanding challenge in catalysis by noble metals has been to understand the origin of enhancements of rates of hydrogen transfer that result from bonding of oxygen near metal sites. We investigated structurally well-defined catalysts consisting of supported tetrairidium carbonyl clusters with single-atom (apical iridium) catalytic sites for ethylene hydrogenation. Reaction of the clusters with ethylene and H 2 followed by O 2 led to the onset of catalytic activity as a terminal CO ligand at each apical Ir atom was removed and bridging dioxygen ligands replaced CO ligands at neighboring (basal-plane) sites. The presence of the dioxygen ligands caused a 6-fold increase in the catalytic reaction rate, which is explained by the electron-withdrawing capability induced by the bridging dioxygen ligands, consistent with the inference that reductive elimination is rate determining. Electronic structure calculations demonstrate an additional role of the dioxygen ligands, changing the mechanism of hydrogen transfer from that involving equatorial hydride ligands to that involving bridging hydride ligands. This mechanism is made evident by an inverse kinetic isotope effect observed in ethylene hydrogenation reactions with H 2 and, alternatively, with D 2 on the cluster incorporating the dioxygen ligands, and is a consequence of quasi-equilibrated hydrogen transfer in this catalyst. The same mechanism accounts for rate enhancements induced by the bridging dioxygen ligands for the catalytic reaction of H 2 with D 2 to give HD. Here, we posit that the mechanism involving bridging hydride ligands facilitated by oxygen ligands remote from the catalytic site may have some generality in catalysis by oxide-supported noble metals.

02 PETROLEUM↗
DOE OSTI2021

Role of Inlet Boundary Conditions on Fuel-Air Mixing at Supercritical Conditions

Advanced engine design and alternative fuels present the possibility of fuel injection at purely supercritical conditions in diesel engines and gas turbines. The complex interactions that govern this phenomenon still need significant research, particularly the boundary conditions for fuel injection are critical for accurate simulation. However, the flow inside the injector itself is often omitted to reduce the computational efforts, and thus, velocity, mass flux, or total pressure is specified at the injector exit (or domain inlet), often with simplified velocity profiles and turbulence levels. This simplified inlet boundary treatment has minimal effects on results for conventional fuel injection conditions, however, the validity of this approach at supercritical conditions has not been assessed. Comprehensive real-gas and binary fluid mixing models have been implemented for computational fluid dynamics (CFD) analysis of fuel-air mixing at supercritical conditions. The model is verified using prior CFD results from the literature. The model is used to investigate the effects of the shape of axial velocity and mass fraction profiles at the inlet boundary with the goal to improve the comparison of predictions to experimental data. Results show that the boundary conditions have a significant effect on the predictions, and none of the cases match precisely with experimental data. Furthermore, the study reveals that the physical location of the inlet boundary might be difficult to infer correctly from the experiments and highlights the need for high-quality, repeatable measurements at supercritical conditions to support the development of relevant high-fidelity models for fuel-air mixing.

02 PETROLEUM↗
DOE OSTI2024

Terephthalic Acid Synthesis from Ethanol via p-Methyl Benzaldehyde

Terephthalic acid (TA) is a high volume and high market commodity chemical which is a monomer used in making polyethylene terephthalate (known as PET) for beverage bottles and packaging films. The global demand for TA in 2012 was 47 million ton and it is expected to grow at a 6 percent rate to reach around 65 million ton in 2018. TA is currently made from petroleum derived p-xylene produced as a co-product during ethylene production in the naphtha cracking process. At present, ethylene is mostly made by ethane cracking of cheap natural gas-shale gas, making naphtha cracking to produce p-xylene uneconomical. Combined with potential unavailability of the petroleum based p-xylene to meet market demand and the end user’s interest in sustainable PET products has created significant attention towards biomass based feed sources for the TA production. The goal of the proposed work is to develop a catalytic process from a biomass-sourced feedstock to a chemical intermediate that can serve as the basis for the economical and renewable TA production that meets market needs.

02 PETROLEUM↗
DOE OSTI2025

Federal Home-to-Work Electric Vehicle Program Guide

This document serves as a comprehensive resource for Federal agencies in developing their own program resources that promote the efficient and effective use of electric vehicles (EVs) for home-to-work travel while ensuring compliance with Federal regulations and sustainability objectives. One mission of the U.S. Department of Energy's Federal Energy Management Program (FEMP) Fleet program is to help federal fleet managers meet or exceed statutory requirements related to energy and environmental performance while improving overall fleet efficiency, reducing costs, and meeting mission requirements. To further this mission, FEMP provides resources to support Federal agencies with increasing alternative fuel vehicle (AFV) acquisitions and reducing petroleum use. EVs are AFVs and help agencies meet federal fleet requirements. Federal fleets include government-owned EVs used for home-to-work travel. The purpose of this document is to serve as a guide for Federal agencies in developing their own internal program documents to manage government-owned EVs used for home-to-work travel. Federal agencies should consult their counsel and consider their own policies and authorities in the implementation of any policies or best practices regarding government-owned EVs used for home-to-work travel. The guide provides key considerations for agencies, including launching a pilot program to fine-tune best practices, conducting a cost-benefit analysis to compare home versus public charging, and exploring cost-effective solutions, such as installing standard outlets instead of dedicated charging stations. The guide underscores the importance of legal and financial considerations, such as verifying agency authority to install home charging infrastructure at an employee's home, ensuring the availability and appropriateness of using agency funds for home charging infrastructure, and understanding the tax implications of reimbursements.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1995

High-pressure combustion of binary fuel sprays

The ultimate objective of this study is to obtain fundamental information relevant to combustion processes that occur in fuel sprays of practical interest at high pressures in internal combustion engines. Since practical fuels are multicomponent and derived from petroleum, the present work involves the model alkane mixture of n-heptane and n-hexadecane. Since burning droplets in sprays can interact with each other, the present work involves investigation of the effects of this interaction on flame shapes and droplet burning times. The small droplets in practical combustion chambers are not significantly influenced by buoyancy. Since such small droplets are difficult to study experimentally, the present work takes advantage of microgravity to lessen buoyancy and enable information about droplet interactions to be obtained by studying larger droplets. The results are intended to provide fundamental understanding that can be used in improving descriptions of practical spray combustion.

Mikami, Masato↗
DOE OSTI2026

Economic Benefits of Alternative Fuels in Rural Alabama

This fact sheet provides an overview of potential alternative fuel vehicle operational cost savings, opportunities to generate revenue for the state and income for individuals, and several examples of alternative fuels supporting jobs in Alabama. Alternative transportation fuels could potentially provide economic benefits to rural Alabama by lowering operating costs for vehicle owners and creating new revenue streams and job opportunities for fuel providers, technicians, and dealerships. The use of electricity, compressed natural gas (CNG), liquefied natural gas (LNG), liquefied petroleum gas (LPG or propane) could result in reduced fuel costs and maintenance expenses for both public and private fleets, as well as individual consumers. Fleet operators often invest in private fueling infrastructure, while publicly accessible stations could attract traffic and commerce to local businesses and communities. Technicians capable of retrofitting alternative fuels and maintaining the vehicles and fueling infrastructure could develop business opportunities as well, but they require special training and often certifications. These cost savings and increased revenues may be recirculated through the economy and impact more than just the beneficiaries listed above.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗