Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase slips”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A microstructure sensitive grain boundary sliding and slip based constitutive model for machining of $\mathrm{Ti}$-$\mathrm{6Al}$-$\mathrm{4V}$

We report a composite dual phase internal state variable constitutive model was developed for Ti-6Al-4V. The proposed model includes diffusion assisted grain boundary sliding based physics in addition to a traditional slip-based plasticity. Influence of microstructure on the flow stress is introduced via dislocation density and mean grain size internal state variables. The dislocation density evolves according to a physics based law that considers dislocation nucleation and annihilation processes. Grain refinement is driven by dynamic recrystallization, which is modeled phenomenologically. The model is calibrated with uniaxial stress–strain data that ranges between quasi-static and dynamic rates across a wide range of temperatures. Validation against machining data shows that the model predicts chip segmentation frequency, machining forces, and tool temperatures reasonably well. The newly introduced grain boundary sliding physics was found to dominate deformation following sufficient grain refinement. This deformation mode provides softening at the constitutive level without the need for invoking damage based softening mechanisms. This physical interpretation is something that has not previously been explored in the machining literature.

36 MATERIALS SCIENCE↗

In situ analysis of plasticity and damage nucleation in a Ti-6Al-4V alloy and laser weld

Highlights: • EBSD in situ tensile test on a Ti-6Al-4V alloy and laser weld • Mainly prismatic, basal and pyramidal a slip activity in the base metal • Damage nucleation in the vicinity of the β phase and at α grain boundaries • Alignment of 10-10 crystallographic direction with the tensile axis in the α′ laths of the weld metal • Crack initiation along specific laths interfaces, former β grain boundary or twinned martensite laths in the weld metal The present work addresses the mechanisms of plasticity and damage nucleation in a Ti-6Al-4V alloy and its laser weld. To this end, in situ tensile tests are performed in a Scanning Electron Microscope (SEM) equipped with a Electron BackScatter Diffraction (EBSD) camera. The slip activity is automatically analyzed using a modified Schmid analysis. It is shown that the slip activity of the base metal consists mainly in prismatic, basal and pyramidal a slip. Damage nucleation in the vicinity of the β phase and at α grain boundaries is also evidenced in the base metal. In the α{sup ′} weld metal (a microstructure similar to the one often obtained in additive manufacturing Ti-alloy parts), plastic deformation results in a crystallographic rotation of the laths tending to align the 〈10 1-bar 0〉 direction with the tensile axis. The rare events of crack initiation in the martensite are shown to occur along specific laths interfaces, former β grain boundary or twinned martensite needles.

36 MATERIALS SCIENCE↗

Earthquake deformation cycle in the Andean Back Arc, western Argentina

It is pointed out that the 1977 Caucete earthquake was an east-west compressive event which occurred at a depth of about 17 km in the Andean back arc approximately 450 km east of the Chile trench. The present study is primarily concerned with the mechanics of fault behavior prior to and after the 1977 earthquake, as evidenced by preseismic and postseismic vertical deformation. Simple fault models for each phase of deformation are presented. The models of preseismic slip, coseismic slip, and postseismic slip consist of uniform dislocations in an elastic half-space following the method of Chinnery (1961). The basically elastic models presented demonstrate that deformations in the vicinity of the 1977 Caucete, Argentina, earthquake are consistent with activity on some portion of the coseismic fault. This is evidence that these deformations are directly related to the processes of strain accumulation and release associated with the event.

Reilinger, R.↗

Distributed deformation and block rotation in three dimensions

A model is developed that attempts to explain distributed deformation, particularly the relationship between fault slip and rotation of faults and blocks in a 3D stress field. Regions of distributed deformation (such as Southern California) are organized in complex arrays of contemporaneously active block-faulted domains. A 3D block rotation model is proposed here that tracks the orientation of blocks and their bounding faults during rotation. It is shown how only one set of faults, preexisting and rotating in an irrotational strike-slip stress field, can account for the three major phases of deformation observed in the Western Transverse Range domain, Southern California.

Scotti, Oona↗

Crystallographic texture formation in Fe-9wt%Si alloy during deformation and phase transition at high pressure

SUMMARY The seismic anisotropy of the Earth's solid inner core has been the topic of much research. It could be explained by the crystallographic preferred orientation (CPO) developing during convection. The likely phase is hexagonal close-packed iron (hcp), alloyed with nickel and some lighter elements. Here we use high energy synchrotron X-rays to study CPO in Fe-9wt%Si, uniaxially compressed in a diamond anvil cell in radial geometry. The experiments reveal that strong preferred orientation forms in the low-pressure body-centred cubic (bcc) phase that appears to be softer than pure iron. CPO is attributed to dominant {110}<111> slip. The onset of the bcc→hcp transition occurs at a pressure of ≈15 GPa, and the alloy remains in a two phase bcc + hcp state up to 40 GPa. The hcp phase forms first with a distinct {11$\bar{2}$0} maximum perpendicular to compression. Modelling shows that this is a transformation texture, which can be described by Burgers orientation relationship with variant selection. Experimental results suggest that bcc grains oriented with <100> parallel to compression transform into hcp first. The CPO of the hcp changes only slowly during further pressure and deviatoric stress increase at ambient temperature. After heating to 1600 K, a change in the hcp CPO is observed with alignment of (0001) planes perpendicular to compression that can be interpreted as dominant (0001)<11$\bar{2}$0> slip, combined with {10$\bar{1}$2}<$\bar{1}$011> mechanical twinning, which is similar to the deformation modes suggested previously for pure hcp iron at inner core conditions.

Vasin, Roman N.↗

In-situ Phase Transformation and Deformation of Iron at High Pressure andTemperature

With a membrane based mechanism to allow for pressure change of a sample in aradial diffraction diamond anvil cell (rDAC) and simultaneous infra-red laser heating, itis now possible to investigate texture changes during deformation and phasetransformations over a wide range of temperature-pressure conditions. The device isused to study bcc (alpha), fcc (gamma) and hcp (epislon) iron. In bcc iron, room temperature compression generates a texture characterized by (100) and (111) poles parallel to the compression direction. During the deformation induced phase transformation to hcp iron, a subset of orientations are favored to transform to the hcp structure first and generate a texture of (01-10) at high angles to the compression direction. Upon further deformation, the remaining grains transform, resulting in a texture that obeys the Burgers relationship of (110)bcc // (0001)hcp. This is in contrast to high temperature results that indicate that texture is developed through dominant pyramidal<a+c> {2-1-12}<2-1-13> and basal (0001)-{2-1-10} slip based on polycrystal plasticity modeling. We also observe that the high temperature fcc phase develops a 110 texture typical for fcc metals deformed in compression.

36 MATERIALS SCIENCE↗

Crystal plasticity including a phase-field deformation twinning model for the high-rate deformation of cyclotetramethylene tetranitramine

A new finite strain thermomechanical model for the high-rate deformation of the β-polymorph of cyclotetramethylene tetranitramine (β-HMX) has been developed and applied to simulations of plate impact experiments. The crystal plasticity model is based on a model developed previously for RDX (Luscher et al. 2017), which is extended to incorporate deformation twinning. Twinning during normal plate impacts is simulated with a phase-field twin model. First, material parameters governing the kinetics of dislocation slip are calibrated on the subset of simulations which had negative Schmid factors for the twin system. Second, a parametric study of the twin material parameters was performed to find suitable values. Overall, the results of the simulations with the phase-field twinning model are reported for impacts on several crystal orientations. We find that the twin growth decreases with increasing distance from the impact surface because of dissipation of the shock front via dislocation-mediated plasticity, and that the simulated interface velocity with and without phase-field twinning do not show appreciable differences. These modeling results suggest that the significance of twinning in β-HMX cannot be determined with traditional loading configurations and diagnostics.

36 MATERIALS SCIENCE↗

Self-equilibrated backstresses induce compensation between hardening and softening: Micromechanical and microstructural features

For crystal plasticity formulation neglecting the strain gradients at the dislocation scale, backstresses are necessary to satisfy the mesoscopic stress equilibrium and strain compatibility requirements. Backstresses in a material point and those between neighboring points are treated separately. Physically backstresses can dynamically induce either hardening or softening effects to adjust the dislocation hardening of slip systems, whereas the sum of the stresses resulting in backstresses in the representative volume element (RVE) is zero. Backstress hardening suppresses certain slip activities, while backstress softening triggers excess dislocations. A two-phase brass is studied. Backstresses make the hard phase deform smaller and the soft phase deform more than those without employing backstresses in a model. In the former, more homogeneous lattice strain and higher yield stress are obtained. Backstress has limited effects on the evolution of the critical resolved shear stress and crystallographic texture. Furthermore, it is a major cause of the banded structures featuring sharp crystallographic contrasts which are not parallel to the slip planes. Tests indicate that backstress induces a serrated behavior at the early stages of deformation and induces the geometrically necessary bands (GNBs), which are parallel to the macroscopic axes.

36 MATERIALS SCIENCE↗

Sequential slip transfer of mixed-character dislocations across Σ3 coherent twin boundary in FCC metals: a concurrent atomistic-continuum study

Sequential slip transfer across grain boundaries (GB) has an important role in size-dependent propagation of plastic deformation in polycrystalline metals. For example, the Hall–Petch effect, which states that a smaller average grain size results in a higher yield stress, can be rationalised in terms of dislocation pile-ups against GBs. In spite of extensive studies in modelling individual phases and grains using atomistic simulations, well-accepted criteria of slip transfer across GBs are still lacking, as well as models of predicting irreversible GB structure evolution. Slip transfer is inherently multiscale since both the atomic structure of the boundary and the long-range fields of the dislocation pile-up come into play. In this work, concurrent atomistic-continuum simulations are performed to study sequential slip transfer of a series of curved dislocations from a given pile-up on Σ3 coherent twin boundary (CTB) in Cu and Al, with dominant leading screw character at the site of interaction. A Frank-Read source is employed to nucleate dislocations continuously. It is found that subject to a shear stress of 1.2 GPa, screw dislocations transfer into the twinned grain in Cu, but glide on the twin boundary plane in Al. Moreover, four dislocation/CTB interaction modes are identified in Al, which are affected by (1) applied shear stress, (2) dislocation line length, and (3) dislocation line curvature. Our results elucidate the discrepancies between atomistic simulations and experimental observations of dislocation-GB reactions and highlight the importance of directly modeling sequential dislocation slip transfer reactions using fully 3D models.

36 MATERIALS SCIENCE↗

Strengthening Mechanisms and Deformation Behavior of Industrially-Cast and Lab-Cast Dual-Phase High Entropy Alloy

An iron-rich high entropy alloy Al 0.65 CoCrFe 2 Ni comprising of both FCC and BCC phases was designed and fabricated using induction melting at a large industrial scale and suction casting at a small lab scale. Spinodally decomposed interdendritic regions were uniformly distributed in the industrially melted alloy, and a finer dendritic structure with smaller sized spinodal structures was observed in the alloy suction cast at lab scale. The suction cast alloy fabricated at the lab scale exhibited significantly higher compressive yield strength compared to the industrially cast alloy. The relative strengthening contributions in the alloys due to solid solution, grain boundary, dislocation interactions and interphase boundary were analyzed. Dislocation hardening was the major contributor responsible for the higher strength of the SC alloy. The deformation behavior in the alloys was examined with the help of orientation image mapping. Finally, intense slip band formation at large strains in the industrially melted alloy indicates that cold working can be an effective technique to enhance the strength of the dual-phase high entropy alloy processed at a large scale.

36 MATERIALS SCIENCE↗

Texture evolution and their effects on the mechanical properties of duplex Mg-Li alloy

Texture evolution is strongly dependent on the deformation mode during thermo-mechanical treatments. In this paper, we report the texture evolution in a duplex Mg-Li alloy. The results provide an evidence of deformation mode transition in the hexagonal-close-packed (hcp) alpha phase with various thickness reductions. The activation sequence of deformation modes is basal slip first, and then pyramidal slip during hot-rolling to a thickness reduction of 40%. The relative activity of slip decreases with further thickness reduction. After annealing, basal texture is strengthened and pyramidal component disappears due to static recrystallization and grain growth. The microstructure, specifically texture evolution in both hcp alpha and body-centered cubic (bcc) beta phase and their effects on mechanical properties are quantitatively analyzed and assessed. (C) 2016 Elsevier B.V. All rights reserved.

36 MATERIALS SCIENCE↗

Deformation of the UI-14at%Nb shape memory alloy: experiments and modeling

U-14at%Nb is a shape memory effect (SME) alloy that undergoes deformation by the motion of complex twins and twin related lath boundaries up to the limit of SME deformation ({approx}7%). All of the twins present in the as-transformed martensite and active during SME deformation are derived from those of the orthorhombic alpha-U phase, modified for the monoclinic distortion of the alpha martensite phase. In the SME regime a simple Bain strain model qualitatively predicts variant selection, texture development in polycrystalline samples, and stress-strain behavior as a function of parent phase orientation in single crystal micropillars. In the post-SME regime, unrecoverable deformation occurs by a combination of slip and twinning, with the first few percent of strain in tension apparently governed by a twin species specifically associated with the monoclinic distortion (i.e. not present in the orthorhombic alpha-U phase). The situation in compression is more complicated, with a combination of slip and twinning systems believed responsible for deformation. A review of the Bain strain model for SME deformation will be presented in conjunction with experimental data. In addition, results from modeling of post-SME behavior using the Visco-Plastic Self-Consistent (VPSC) model will be compared to experimental texture measurements.

36 MATERIALS SCIENCE↗

The enigma of post-perovskite anisotropy: deformation versus transformation textures

The D'' region that lies just above the core mantle boundary exhibits complex anisotropy that this is likely due to preferred orientation (texturing) of the constituent minerals. (Mg,Fe)SiO{sub 3} post-perovskite is widely thought to be the major mineral phase of the D''. Texture development has been studied in various post-perovskite phases (MgSiO{sub 3}, MgGeO{sub 3}, and CaIrO{sub 3}), and different results were obtained. To clarify this controversy, we report on transformation and deformation textures in MgGeO{sub 3} post-perovskite synthesized and deformed at room temperature in the diamond anvil cell. Transformed from the enstatite phase, MgGeO{sub 3} post-perovskite exhibits a transformation texture characterized by (100) planes at high angles to the direction of compression. Upon subsequent deformation, this texture changes and (001) lattice planes become oriented nearly perpendicular to compression, consistent with dominant (001)[100] slip. When MgGeO{sub 3} post-perovskite is synthesized from the perovskite phase, a different transformation texture is observed. This texture has (001) planes at high angle to compression and becomes slightly stronger upon compression. We also find that the yield strength of MgGeO{sub 3} post-perovskite is dependent on grain size and texture. Finer-grained samples exhibit higher yield strength and are harder to induce plastic deformation. Strong textures also affect the yield strength and can result in higher differential stresses. The inferred dominant (001) slip for pPv is significant for geophysics, because, when applied to geodynamic convection models, it predicts the observed anisotropies of S-waves as well as an anti-correlation between P- and S-waves.

36 MATERIALS SCIENCE↗

A review of slip transfer: applications of mesoscale techniques

In this review article, we present and discuss recent mesoscale modeling studies of slip transmission of dislocations through biphase interfaces. Specific focus is given to fcc/fcc material systems. We first briefly review experimental, atomistic, and continuum-scale work that has helped to shape our understanding of these systems. Then several mesoscale methods are discussed, including Peierls–Nabarro models, discrete dislocation dynamics models, and phase field-based techniques. Recent extensions to the mesoscale mechanics technique called phase field dislocation dynamics are reviewed in detail. Results are compiled and discussed in terms of the proposed guidelines that relate composite properties to the critical stress required for a slip transmission event.

36 MATERIALS SCIENCE↗

Incorporating dynamic recrystallization into a crystal plasticity model for high-temperature deformation of Ti-6Al-4V

During hot deformation of (α + β) titanium alloys, the simultaneous action of strain and temperature in the (α + β) regime facilitates dynamic recovery, dynamic recrystallization (DRX), and phase transformations via non-equilibrium paths. DRX is manifested in the form of fine recrystallized α or β grains. Here, in the present study, a two-phase crystal plasticity finite element framework (CP-DRX) has been developed which incorporates DRX kinetics into the crystal plasticity (CP) model to predict the flow characteristics of Ti-6Al-4V alloys during thermo-mechanical processing. The CP slip system parameters, as well as elastic properties from both α and β phases of Ti, are calibrated for different strain rate conditions. An EBSD-informed two-phase microstructure representation has been utilized in the CP-DRX framework to explore the time-dependent evolution of DRX microstructure and crystal orientation for different strain rate conditions. The proposed CP-DRX can capture the evolution of crystal orientation and plastic flow stress–strain response of polycrystalline Ti-6Al-4V during the deformation process. Furthermore, the proposed model is able to capture the softening behavior, observed in average stress–strain response from experiments performed using a Gleeble thermomechanical simulator and predict the recrystallization texture.

(α+ β)-Titanium (Ti) Alloys↗

Phonon-deformational generalized ginzburg-landau functionals for describing martensite transitions between FCC and BCC structures in metals

A method is developed for theoretical description of martensite transitions between fcc and bcc phases of metals based on generalized Ginzburg-Landau functionals (GGLFs), in which the transformation parameters are the 'phonon' parameter describing relative slips of close-packed atomic planes and fcc lattice deformations in the region of a martensite inclusion. General expressions are proposed for calculating the deformational contributions to the GGLF. Local strains and local elastic moduli in the region of martensite inclusions are estimated numerically. The possibility of constructing phenomenological expressions for the GGLF using interpolations of available experimental data on the structure and elastic moduli in the fcc and bcc phases is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A General Model for the Ductility of Intermetallics Applied to Fe-Co Alloys

The mechanical properties, specifically ductility, of high performing soft magnets such as Fe-Co alloys are a limiting factor to their broader use in a number of systems. The understanding of the mechanical robustness in these materials is currently insufficient to be able to support the growing interest in applications such as magnetic shielding or electric motors. Fe-Co alloys provide the highest commercially available magnetic saturation and high magnetic permeability but have very poor ductility. The addition of vanadium to these alloys has allowed for significant commercialization and some ductility improvements, but the fundamental reasons for the observed improvements are not well understood. In most published work on mechanical properties in these alloys, the precise chemistry of the alloys investigated, often a critical aspect of intermetallics, is not reported or controlled and thermal history is unclear. This work creates a ductility model that is sensitive to changes in chemistry and can predict relative strain to failure as well as brittle fracture mode for intermetallics and is applied to Fe-Co alloys. Through the application of density functional theory (DFT), this model identifies defect stabilities, anti-phase boundary (APB) energies, the energy necessary to cross-slip, and cleavage energies and combines them through energetic competition to determine a relative failure strain. The model correctly predicts ductility improvements with the addition of vanadium as well as the transition from intergranular to transgranular cleavage, though more precise experiments are necessary to appropriately validate the various improvements observed.

36 MATERIALS SCIENCE↗