Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADAR MAP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Global mapping strategies for a synthetic aperture radar system in orbit about Venus

An analysis of the global mapping of Venus using a synthetic aperture radar (SAR) is presented. The geometry of the side-looking radar, the narrow swath width, and the slow rotation of Venus combine to constrain the methods required to produce such a map within the primary mapping mission of 121.5 days. Parametric studies indicate that multiple strategies can satisfy the requirements of the mission with reasonable assumptions for the total recording capacity, the downlink data rate, and the operating time of the SAR on each revolution.

Kerridge, S. J.↗

Mapping high-latitude plasma convection with coherent HF radars

Several methods developed for mapping high-latitude plasma convection with a high-latitude HF radar are described, which utilize coherent backscatter from electron density irregularities at F-region altitudes to observe convective plasma motion. Several examples of two-dimensional convection-velocity maps are presented, showing instances of L-shell-aligned flow in the dusk sector, the reversal of convection near magnetic midnight, and counterstreaming in the dayside cleft.

Ruohoniemi, J. M.↗

Performance evaluation of the JPL TOPSAR system: An across-track interferometric SAR system for topographic mapping

An across-track interferometric (XTI) SAR has the capability of determining the three dimensional target location from the recorded radar echos thus providing high spatial resolution both horizontally and vertically. The output of an XTI SAR will typically include both a radar backscatter map and a digital elevation model (DEM). The accuracy of the derived DEM is determined by factors such as data acquisition geometry, signal-to-noise ratio, knowledge of platform position and attitude as well as the accuracy of the processing system. In the summer of 1992 the authors acquired TOPSAR data over the Ft. Irwin area in California, a desert area with significant relief (height standard deviation 150 m). Very accurate DEM's have been derived for this area by the Topographic Engineering Center (TEC) using digital correlation methods on 1:20,000 scale digitized photographs. Corner reflectors were deployed in the area, and their locations were determined to cm accuracies by the Defense Mapping Agency (DMA) using differential GPS techniques. DEM's generated from the acquired radar data have been rotated and translated to overlay the reference DEM's provided by TEC. A detailed description of the errors and their characteristics will be given. The standard deviations of the radar data sets we acquired measured over a 5.6 by 7 km area were 1.9 and 2.3 m. The corresponding numbers for flat areas were 1.1 and 2.0 m and for mountain areas 3.3 and 2.2 m.

Madsen, Soren N.↗

Damage Proxy Map from Interferometric Synthetic Aperture Radar Coherence

A method, apparatus, and article of manufacture provide the ability to generate a damage proxy map. A master coherence map and a slave coherence map, for an area prior and subsequent to (including) a damage event are obtained. The slave coherence map is registered to the master coherence map. Pixel values of the slave coherence map are modified using histogram matching to provide a first histogram of the master coherence map that exactly matches a second histogram of the slave coherence map. A coherence difference between the slave coherence map and the master coherence map is computed to produce a damage proxy map. The damage proxy map is displayed with the coherence difference displayed in a visually distinguishable manner.

Yun, Sang-Ho↗

The wide swath ocean altimeter: radar interferometry for global ocean mapping with centimetric accuracy

We have developed an instrument concept that combines a conventional nadir altimeter with a radar interferometer to meet the above requirements. In this paper, we describe the overall mission concept and the interferometric radar design. We also describe several new technology developments that facilitate the inclusion of this instrument on a small, inexpensive spacecraft bus. Those include ultra-light, deployable reflectarray antennas for the radar interferometer; a novel five frequency feed horn for the radiometer and altimeter; a lightweight, low power integrated three frequency radiometer; and a field programmable gate array-based onboard data processor. Finally, we discuss recent algorithm developments for the onboard date processing, and present the expected instatements performance improvements over previously reported results.

interferometry↗

Airborne and spaceborne radar images for geologic and environmental mapping in the Amazon rain forest, Brazil

Spaceborne and airborne radar image of portions of the Middle and Upper Amazon basin in the state of Amazonas and the Territory of Roraima are compared for purposes of geological and environmental mapping. The contrasted illumination geometries and imaging parameters are related to terrain slope and surface roughness characteristics for corresponding areas that were covered by each of the radar imaging systems. Landforms range from deeply dissected mountain and plateau with relief up to 500 m in Roraima, revealing ancient layered rocks through folded residual mountains to deeply beveled pediplain in Amazonas. Geomorphic features provide distinct textural signatures that are characteristic of different rock associations. The principle drainages in the areas covered are the Rio Negro, Rio Branco, and the Rio Japura. Shadowing effects and low radar sensitivity to subtle linear fractures that are aligned parallel or nearly parallel to the direction of radar illumination illustrate the need to obtain multiple coverage with viewing directions about 90 degrees. Perception of standing water and alluvial forest in floodplains varies with incident angle and with season. Multitemporal data sets acquired over periods of years provide an ideal method of monitoring environmental changes.

Ford, John P.↗

Ice sheet radar altimetry

The surface topography of the Greenland and Antarctic ice sheets between 72 degrees north and south was mapped using radar altimetry data from the U.S. Navy GEOSAT. The glaciological objectives of this activity were to study the dynamics of the ice flow, changes in the position of floating ice-shelf fronts, and ultimately to measure temporal changes in ice surface elevation indicative of ice sheet mass balance.

Zwally, J.↗

Side-looking radar mosaicking experiment

A block of 24 overlapping synthetic aperture side-looking radar images flown over a well mapped area of about 90,000 sq km provided an opportunity to evaluate the mapping accuracy achieved in current radar mosaicking projects. The maps of scale 1:24,000 that are available in the imaged area permitted the study of the geometric errors of the radar mosaics and of individual radar strips. An estimate was obtained for the effect of the distribution and density of ground control points and for the accuracy of different mosaicking methods that are currently employed with synthetic aperture radar images. It is shown that a successful radar mosaicking process requires the elimination of image errors of up to several kilometers. These errors are introduced as a result of the limited precision of the inertial aircraft navigation. An example of a radar mapping effort in which the navigation errors could be eliminated is presented. The resulting radar mosaics have residual RMS mapping errors of planimetry of about plus or minus 150 m.

Leberl, F.↗

Mapping diverse forest cover with multipolarization airborne radar

Imaging radar backscatter in continuously forested areas contains information about the forest canopy; it also contains data about topography, landforms, and terrain texture. For purposes of radar image interpretation and geologic mapping researchers were interested in identifying and separating forest canopy effects from geologic or geomorphic effects on radar images. The objectives of this investigation was to evaluate forest canopy variables in multipolarization radar images under conditions where geologic and topographic variables are at a minimum. A subsidiary objective was to compare the discriminatory capabilities of the radar images with corresponding optical images of similar spatial resolution. It appears that the multipolarization images discriminate variation in tree density, but no evidence was found for discrimination between evergreen and deciduous forest types.

Ford, J. P.↗

Mission planning and operations of a Space Shuttle payload experiment: SIR-A

In November 1981 the first scientific payload was carried on board the second flight of the Space Shuttle. The principal instrument on that flight was a synthetic aperture radar. This paper is concerned with the operational concepts developed to achieve the objective of terrestrial geologic mapping by radar from earth orbit for this mission. Computer software was developed as an aid to mission design prior to the mission and as a replanning tool used during the mission: The first step in the development of software for future missions where such tools will become indispensable to meet the apparently contradictory objectives of complex observations and low cost.

Harris, H. M.↗

Spaceborne Radar Would Measure Rain And Clouds

Report describes conceptual design of spaceborne radar system mapping precipitation and clouds at mid-latitudes to provide data for research on global weather and climate. Radar operates at two frequencies. Lower (35 GHz) provides vertical profiles of rainfall at rates up to 20 mm/h and enables probing of cirrus clouds. Higher (94 GHz) enables detection and quantitative measurements of clouds of all types and provides rain profiles at rates up to 10 mm/h.

Im, Eastwood↗

Mapping of glacial landforms from Seasat radar images

Glacial landforms in the drumlin drift belt of Ireland and the Alaska Range can be identified and mapped from Seasat synthetic-aperture radar (SAR) images. Drumlins cover 60 percent of the Ireland scene. The width/length ratio of individual drumlins can be measured on the SAR images, allowing regional differences in drumlin shape to be mapped. This cannot be done with corresponding Landsat multispectral scanner (MSS) images because of lower spatial resolution and because of shadowing effects that vary seasonally. The Alaska scene shows the extent and nature of morphological features such as medial and lateral moraines, stagnant ice, and fluted ground moraine in glaciated valleys. Perception of these features on corresponding Landsat MSS images is limited by seasonal diffrences in solar illumination. Because SAR is not affected by such differences or by cloud cover, it is particularly well suited for monitoring glacial movement. The disadvantage of distorted high-relief features on Seasat SAR images can be reduced in future SAR systems by modifying the radar illumination geometry.

Ford, J. P.↗

Sea ice type maps from Alaska synthetic aperture radar facility imagery: An assessment

Synthetic aperture radar (SAR) imagery received at the Alaskan SAR Facility is routinely and automatically classified on the Geophysical Processor System (GPS) to create ice type maps. We evaluated the wintertime performance of the GPS classification algorithm by comparing ice type percentages from supervised classification with percentages from the algorithm. The root mean square (RMS) difference for multiyear ice is about 6%, while the inconsistency in supervised classification is about 3%. The algorithm separates first-year from multiyear ice well, although it sometimes fails to correctly classify new ice and open water owing to the wide distribution of backscatter for these classes. Our results imply a high degree of accuracy and consistency in the growing archive of multiyear and first-year ice distribution maps. These results have implications for heat and mass balance studies which are furthered by the ability to accurately characterize ice type distributions over a large part of the Arctic.

Fetterer, Florence M.↗

Comparison of simulated and actual wind shear radar data products

Prior to the development of the NASA experimental wind shear radar system, extensive computer simulations were conducted to determine the performance of the radar in combined weather and ground clutter environments. The simulation of the radar used analytical microburst models to determine weather returns and synthetic aperture radar (SAR) maps to determine ground clutter returns. These simulations were used to guide the development of hazard detection algorithms and to predict their performance. The structure of the radar simulation is reviewed. Actual flight data results from the Orlando and Denver tests are compared with simulated results. Areas of agreement and disagreement of actual and simulated results are shown.

Britt, Charles L.↗