Search NASA⌕ Search

SEARCH · Search NASA

Results for “RIMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Particle Size Distributions in Chondritic Meteorites: Evidence for Pre-Planetesimal Histories

Magnesium-rich silicate chondrules and calcium-, aluminum-rich refractory inclusions (CAIs) are fundamental components of primitive chondritic meteorites. It has been suggested that concentration of these early-formed particles by nebular sorting processes may lead to accretion of planetesimals, the planetary bodies that represent the building blocks of the terrestrial planets. In this case, the size distributions of the particles may constrain the accretion process. Here we present new particle size distribution data for Northwest Africa 5717, a primitive ordinary chondrite (ungrouped 3.05) and the well-known carbonaceous chondrite Allende (CV3). Instead of the relatively narrow size distributions obtained in previous studies (Ebel et al., 2016; Friedrich et al., 2015; Paque and Cuzzi, 1997, and references therein), we observed broad size distributions for all particle types in both meteorites. Detailed microscopic image analysis of Allende shows differences in the size distributions of chondrule subtypes, but collectively these subpopulations comprise a composite "chondrule" size distribution that is similar to the broad size distribution found for CAIs. Also, we find accretionary 'dust' rims on only a subset (approximately 15-20 percent) of the chondrules contained in Allende, which indicates that subpopulations of chondrules experienced distinct histories prior to planetary accretion. For the rimmed subset, we find positive correlation between rim thickness and chondrule size. The remarkable similarity between the size distributions of various subgroups of particles, both with and without fine grained rims, implies a common size sorting process. Chondrite classification schemes, astrophysical disk models that predict a narrow chondrule size population and/or a common localized formation event, and conventional particle analysis methods must all be critically reevaluated. We support the idea that distinct "lithologies" in NWA 5717 are nebular aggregates of chondrules. If greater than or equal to centimeter-sized aggregates of chondrules can form it will have implications for planet formation and suggests the sticking stage is where the preferential size physics is operating.

chondritic meteorites↗
NASA NTRSDate not supplied

Thermodynamic and Diffusion Model Estimates on Metamorphic Temperatures and Timescales for Basaltic Eucrite GRA 98098

Introduction: HED meteorites are thought to rep-resent igneous rocks from Vesta’s basaltic crust and preserve evidence of early crustal metamorphism. Determining the temperatures and timescales of thermal metamorphism is important for reconstructing crustal evolution in the early solar system. Here, we study basaltic eucrite Graves Nunataks (GRA) 98098, which has been identified as a highly metamorphosed eucrite [1]. We present new estimates on metamorphic temperatures determined via thermodynamic modeling as well as the initial results from diffusion models constraining timescales of thermal metamorphism. Sample Description: GRA 98098 is an unbrecciated eucrite with a granoblastic plagioclase and pyroxene mineralogy. Millimeter to cm-long lathes of tridymite cross-cut and poikilitically enclose plagioclase and pyroxene [1,this work]. Pyroxene grains have exsolved into Ca-rich (~Wo38En29Fs33) and Ca-poor (~Wo4.5En36Fs59.5) lamellae. Both unzoned and zoned plagioclase grains are observed. Unzoned plagioclase grains are found solely with tridymite laths. These grains have ~An92 compositions. The cores of the zoned plagioclase grains have the same composition and thin, relatively sodic rims (~An67), (Fig. 1). The bulk sample is unusually enriched in highly in-compatible elements and has one of the most fractionated REE patterns reported [1]. Maximum metamorphic temperatures of 985±78°C have been estimated using two-pyroxene thermometry [2]. Methods: Thermodynamic modeling. Thermodynamic models were constructed using the software Perple_X, which employs a Gibbs free energy minimization in order to determine the most stable phase assemblage for a given bulk rock composition [3]. Bulk composition was calculated using mineral com-positions acquired via EMPA (this study) and the observed abundancies present in the thin section. Two bulk compositions were estimated; 1) includes all phases present in the thin section, (assumes that all phases are present during metamorphism), 2) excludes tridymite from the bulk calculation (assumes that tridymite was not present during metamorphism). In order to determine whether metamorphic equilibria was achieved and estimate temperatures of metamorphism, we compared measured pyroxene compositions with thermodynamically predicted compositions [4, Fig. 2]. Diffusion Modeling. Several time-temperature de-pendent diffusion profiles were calculated in order to determine the best match for XAn chemical profiles observed at the edges of the zoned plagioclase (Fig. 3). We assumed that the start condition was a stepwise gradient at the plagioclase/pyroxene interface. We also assumed an average diffusion coefficient (D) and a constant temperature using the equation in [5]. D was determined for two temperatures (T = 1060ºC; near eucrite solidus [6] and T = 985ºC; metamorphism reported in [4]) and then XAn was calculated as a function of distance from plagioclase core to rim using an error function solution to Fick’s second law. Results: Thermodynamic model results are summarized in Fig. 2. For a bulk composition that includes all phases in the thin section, pyroxene endmember compositions plot in the following temperature ranges: Fs ~660-860ºC, En~1000ºC & 1150ºC, and Wo~760-900ºC (Fig. 2a). For a bulk composition that excludes tridymite from the peak metamorphic assemblage (i.e., the bulk composition minus the contribution from tridymite), a temperature range could not be determined for the Fs component of pyroxene. For Wo, T~760-900ºC and En, T~1000ºC & 1150ºC (Fig. 2b). Fig. 3 summarizes the diffusion model results. For T = 1060°C & 985°C, the most appropriate time interval was estimated based on which diffusion curve most matched (solid lines, Fig. 3) the EMPA data. For T = 1060°C, the best looking match was t = 500 ka. For T = 985°C, the best match was t = 7 Ma. Discussion and future work: Temperature estimates from thermodynamic models are not conclusive because the temperature ranges determined for pyroxene endmember stability do not overlap (colored fields in Fig. 2), thus implying that there is disequilibrium between pyroxene crystals and the bulk composition considered [4]. Thus, additional exploration is needed to define a metamorphically equilibrated do-main that accurately records peak temperature. The utility of defining metamorphically equilibrated do-mains to improve the accuracy and level of detail elucidated regarding the petrogenetic history of metamorphose samples has been demonstrated previously [4,7]. We suggest that in the case of Fig. 2a, the thin section composition is not representative of the length scales over which metamorphic equilibrium was achieve and in the case of Fig. 2b, the assumption that tridymite was not present during metamorphism was incorrect. However, results from thermodynamic models can provide insight into the relative timing of mineral and compositional textures. For example from texture alone, it is unclear whether tridymite was igneous in origin and represents the last bits of melt in a crystallizing magma chamber, or if it formed during (and possibly initiated) open system thermal metamorphism. The latter could be consistent with a partial melt hypothesis [8,9] while the former implies that simple fractional crystallization can yield the textures present in GRA 98098. The lack of coincidence be-tween pyroxene endmember compositions in Fig. 2b suggest that the bulk composition minus tridymite was not the assemblage in equilibrium with the pyroxene, suggesting that tridymite was present during metamorphism and formed during igneous crystallization. We conclude that the development of the Na-rich plagioclase rims likely occurred during or immediately after peak thermal metamorphism, because eucrites of similar metamorphic grade and texture have unzoned plagioclase (~An92) [2,4,8], and Na zoning is only observed in the plagioclase not included in the tridymite. This suggests that the zoning formed after tridymite formation, and therefore after igneous crystallization. Thus, the timescales calculated via diffusion modeling possibly represent the time interval over which thermal metamorphism occurred. Cooling rates approximated for the Vestan crust predict that the crust cooled below 300°C around 35-40 Ma after formation[10]. This is consistent with our modeling results that predict formation of the Na rich plagioclase rims occurring at higher temperatures over a period of 0.5 to 7 Ma years. Future work. Additional thermodynamic modeling work will focus on selecting an equilibrated bulk rock domain in which to elucidate metamorphic conditions. Diffusion models currently provide a minimum time-scale, since diffusion slows down as the system cools. Future work with will focus on integrating cooling into the diffusion models and constraining the depth at which thermal metamorphism occurs because it could be used to determine whether the range of time-scales calculated for thermal metamorphism are consistent with the geologic environment.

J S Gorce↗
NASA NTRSDate not supplied

Heterogeneity of Bulk Oxygen Isotopic Compositions in Anhydrous Interplanetary Dust Particles

Introduction: Anhydrous interplanetary dust particles are one of the least altered ancient solar systemmaterials. Their bulk chemical compositions match those of CI chondrites within a factor of 2-3, except for carbonwhich is enriched in both anhydrous and hydrated IDPs by ~4x CI [1]. Hydrous IDPs often show 16O-poor isotopiccompositions, likely due to the interaction with isotopically heavy H2O [2]. Anhydrous IDPs are interpreted tooriginate from comets from the outer solar system [3]. Oxygen isotopic data for these materials is scarce, but resultspoint to a wider range of compositions [4]. This heterogeneity might be a result of mixing between a 16O-rich and a16O-poor reservoir formed via self-shielding and photodissociation of CO [5]. Here, we report bulk oxygen isotopiccompositions of three anhydrous IDPs in context of their mineralogical composition and discuss possible origins ofisotopic heterogeneity. Experimental: Bulk chemical composition and mineralogy of 70 nm thin ultramicrotomed sections of threeanhydrous IDPs (L2099A7, L2099A8, and L2071AB1) were analyzed using a Thermo Scientific Titan Themis G360-300 TEM equipped with a four-quadrant energy-dispersive X-ray detector (Super-X G2) at University ofMünster. Bulk oxygen isotopic compositions were measured using a NanoSIMS 50 at the Max-Planck-Institut fürChemie in Mainz. A focused Cs+ ion beam (~1 pA, ~100 nm) was rastered over a field of view varying from 5 x 5 to6 x 6 μm2, depending on particle size for 15 layers. Negative secondary ions of 16O, 17O, 18O, 12C14N, and 28Si werecollected on electron multipliers. The 16OH contribution to the 17O peak was 1-2 ‰. As a standard, a matrix regionof meteorite CR2 Queen Alexandra Range (QUE) 99177 was used, whose oxygen isotopic composition wasmeasured by [6]. Results and Discussion: Particles A7 and A8 are both fine-grained, consisting mostly of small, 100 nm-sizedequilibrated aggregates (EA). Both particles exhibit discontinuous magnetite rims with thicknesses up to 50 nm inA7 and 100 nm in A8 on the outsides. In Particle AB1, the upper part of the particle consists of a few EAs, while thelower part contains lots of small GEMS grains with 100-200 nm diameter clustered together. Magnetite rims arenearly absent, the rare rims reaching maximum 20 nm thickness, indicating that AB1 is of more primitive naturethan the other two IDPs [1]. Furthermore, it contains several diffuse GEMS-like areas, identified by an amorphoussilicate groundmass with small nano-inclusions of Fe,Ni-metal and Fe-sulfides. All three particles are subsolar forall major element/Si ratios. Mean S/Si of particles A7 and A8 is 0.046 and 0.048, respectively, while it is an order ofmagnitude higher in AB1 (0.184). This reflects the higher degree of thermal alteration in A7 and A8, resulting in theloss of volatile S and oxidation of Fe-sulfides and FeNi-metal to magnetite as present in particle rims. A8 is rather16O-poor with δ17OSMOW = 7.8 ± 3.4 ‰ and δ18OSMOW = 9.5 ± 3.1 ‰ (1σ), followed by A7 with δ17OSMOW = − 0.8 ±4.6 ‰ and δ18OSMOW = −2.2 ± 3.4 ‰. In contrast to that, AB1 has the most 16O-rich bulk composition with δ17OSMOW= −24.2 ± 5.4 ‰ and δ18OSMOW = −25.3 ± 3.6 ‰. All investigated IDPs plot slightly above the CCAM line aspreviously reported for other anhydrous IDPs [4], maybe due to a contribution from circumstellar dust from AGBstars enriched in 17O [7]. The 16O-rich composition of AB1 is similar to the most 16O-rich anhydrous IDP U2015D21measured by [8] which is dominated by GEMS [9] and the GEMS-rich IDP GM4-2 reported by [10]. Nevertheless,it is unlikely that GEMS are the carrier for the 16O-rich composition of AB1 because most GEMS have O isotopiccompositions indistinguishable from terrestrial values, although errors on these analyses are large [11]. The isotopicheterogeneity is best explained by contribution of grains from different regions in the protoplanetary disk, samplingdifferent O isotope reservoirs, created by self-shielding and photodissociation of CO. This process resulted in 16O-rich CO gas and 16O-poor H2O that froze as ice-mantles onto dust grains [12]. Alternatively, the higher degree ofheating in A7 and A8 could have influenced isotopic fractionation, because higher δ17,18O values are reported fromthe regions of the atmosphere where small particles are heated and oxidized, as observed for the thermal alteration ofcosmic spherules [13]. Acknowledgements: We would like to thank NASA Astromaterials Acquisition & Curation Office for providing IDPsamples and DFG for funding this project (VO1816/5-1)

B Schulz↗
NASA NTRS2024

Key Perseverance Sampling Locations for the Ancient Martian Crust and Implications for Mars Science

Since Feb 2021, the Perseverance rover has collected samples in the Jezero crater. The plan baselined at the 2018 landing site selection, subsequently further developed by the Mars-2020 team, and presented to the Decadal Survey included the exploration and sampling of the Jezero crater rim and the Nili Planum area, a rock record that is important to preserving the science return of the endeavor. Specifically, the science team identified the following prioritized science objectives aligned with community objectives that are not covered by the current sample cache: 1) Investigate the habitable environments with potential biosignatures from a more ancient time interval and from a diverse set of geological environments (incl. exposed subsurface) than the Jezero crater sedimentary deposits (Fig. 2). (2) Determine radioisotopic ages for well-defined craterretaining surfaces and/or the Isidis basin impact event. (3) Characterize ancient aqueous environments to study climate, environmental transitions, and habitability on ancient Mars. (4) Investigate planetary accretion, crustal evolution, and dynamo activity through analysis and sampling of igneous lithologies. (5) Study the geology of basin-forming impacts. In addition, for the Jezero rim and any Jezero ejecta: (6) Analyze Jezero impactites for potentially habitable hydrothermal environments and radioisotopic dating of the Jezero crater formation. From 2018 to now, we used a combination of High Resolution Imaging Experiment (HiRISE) and Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) data to further characterize Jezero rim and Nili Planum, culminating in our prioritized sample location recommendations: (1) Monument Valley and (2) Northwest Jezero rim.

Mars sample return↗
NASA NTRS2024

The Spectral Characteristics of Lunar Agglutinates: Visible-Near-Infrared Spectroscopy of Apollo Soil Separates

The lunar surface evolves over time due to space weathering, and the visible–near-infrared spectra of more mature (i.e., heavily weathered) soils are lower in reflectance and steeper in spectral slope (i.e., darker and redder) than their immature counterparts. These spectral changes have traditionally been attributed to the space-weathered rims of soil grains (and particularly nanophase iron therein). However, understudied thus far is the spectral role of agglutinates—the agglomerates of mineral and lithic fragments, nanophase iron, and glass that are formed by micrometeoroid impacts and are ubiquitous in mature lunar soils. We separated agglutinates and non-agglutinates from six lunar soils of varying maturity and composition, primarily from the 125–250 μm size fraction, and measured their visible–near-infrared reflectance spectra. For each soil, the agglutinate spectra are darker, redder, and have weaker absorption bands than the corresponding non-agglutinate and unsorted soil spectra. Moreover, greater soil maturity corresponds to darker agglutinate spectra with weaker absorption bands. These findings suggest that agglutinates (rather than solely the space-weathered rims) play an important role in both the darkening and reddening of mature soils—at least for the size fractions examined here. Comparisons with analog soils suggest that high nanophase iron abundance in agglutinates is likely responsible for their low reflectance and spectrally red slope. Additional studies of agglutinates are needed both to more comprehensively characterize their spectral properties (across size fractions and in mixing with non-agglutinates) and to assess the relative roles of agglutinates and rims in weathering-associated spectral changes. Plain Language Summary - In scientific study of the Moon, one key focus is surface processes: how do physical and chemical properties of the Moon’s surface change over time due to weathering (e.g., bombardment by micrometeoroids and by particles from the Sun)? Such investigations provide valuable insights into the Moon’s history (such as the ages of impact craters) that are often deduced from measurements of reflected light; as a soil is weathered it reflects light differently, which manifests visually as a progressive darkening of the soil. This phenomenon had primarily been attributed to weathering-associated development of rims on individual soil grains, but in this work we explored an alternative cause: soil particles known as agglutinates (misshapen, vesicular agglomerates of mineral fragments, iron, and glass that form due to weathering processes). We isolated agglutinates of six soil samples from the Moon and measured how they reflect light. We find that they reflect light in patterns reminiscent of how the Moon’s surface does when weathered. These findings suggest that agglutinates play a more important role than previously thought in determining the light-reflecting properties of the Moon’s surface, thus warranting greater and more nuanced consideration in future studies of how the Moon’s surface changes over time.

spectroscopy↗
NASA NTRS1972

Structural aspects of Imbrium sculpture, part G

Apollo 16 metric photographs taken at low to high sun angles provided the first stereographic coverage of the distinctive landforms collectively referred to as Imbrium sculpture. The sculpture consists of a series of nearly linear ridges and troughs extending radially outward for more than 1000 km from the rim of the Imbrium Basin. The origin of the ridges and troughs, whether by deposition and impact scoring by fluidized clouds of ejecta from the Imbrium Basin or by faulting and volcanism during and subsequent to basin formation, is controversial. Evidence indicative of the mode of origin of Imbrium sculpture is summarized as follows. Evidence of volcano-tectonic mode of origin is favored by: (1) wide variation in relative age of parts of the sculpture; (2) furrows without rims; (3) absence of ballistic shielding; (4) asymmetry of sculpture; (5) absence of randomly oriented clusters; and (6) association with other features of structural origin. An origin by ejecta scoring and deposition is favored by the gradational ejecta with a Fra Mauro-type texture. Features that are ambiguous as to mode or origin are furrows made of coalesced crater chains and prominent rims on furrows.

Scott, D. H.↗
NASA NTRS1972

King Crater and its environs, part M

Superb photographs of King Crater were returned by the Apollo 16 crew. The metric and panoramic cameras provided stereoscopic coverage with which high quality topographic maps may be made. King crater, approximately 75 km in diameter and, on the average, 3.8 km deep, is among the most significant features photographed and visually studied from lunar orbit on the Apollo 16 mission. It is the freshest crater on the far side in its size range and has several unique characteristics. (1) Although its ejecta blanket displays very sharp features, the crater does not appear to have extensive ray systems and secondary crater chains. (2) As depicted for the first time by Apollo 16 photographs, the ejecta blanket is strewn with numerous flow fronts and scarps. (3) A flat and smooth, dark, lavalike deposit 15 km across is on the northern rim of the crater. (4) The central peak of the crater is a Y-shaped structure that begins at the southern rim. (5) Bright units that are aligned with the central peak on the northern wall and rim suggest that a preexisting tabular body was excavated by the cratering process.

El-Baz, F.↗
NASA NTRS1973

Use of ERTS-1 images in the search for porphyry copper deposits in Pakistani Baluchistan

Geomorphic features related to a known porphyry copper deposit at Saindak, western Chagai District, Pakistan, are easily distinguished on ERTS-1 images. New geologic information from the images was used in conjunction with known geology to evaluate one previously known prospect area and to suggest two additional ones, but no new prospects were recognized on the basis of the images alone. The study also showed that Saindak-type deposits are not likely to be present in some extensive areas of the Chagai District. The Saindak deposit is in an area of relatively easily eroded folded sedimentary and volcanic rocks. The deposit is characterized by an elongate zone of easily eroded sulfide-rich rock surrounded by this rim and the central sulfide-rich valley are conspicuous features on the images. Swarms of dikes are probably useful for distinguishing real rims from other resistant rock types, but there is no expression of them on the image, although they are easily seen on aerial photographs of the Saindak rim.

Schmidt, R. G.↗
NASA NTRS1973

Flight monitor for jet engine disk cracks and the use of critical length criterion of fracture mechanics

A disk crack detector is discussed which is intended to operate under flight conditions. It monitors the disk rim for surface cracks emanating from the blade root interface. An eddy current type sensor, with a remotely located capacitance/conductance bridge and signal analyzer, can reliably detect a simulated crack 3 mm long. The sensor was tested on a spinning turbine disk at 540 C. Tests indicate that the system is useful at disk rim velocities to 460 m/sec. By using fracture mechanics, it is shown for Inconel 718 th at a crack operating under a rim stress of 34 x ten to the 7th power N/sqm has a critical length of 18 mm.

Barranger, J. P.↗
NASA NTRS1973

Observations of Mare Serenitatis from lunar orbit and their interpretation

Visual observations are investigated of color differences of Serenitatis mare materials from orbit complement photography and other remotely sensed data. The light tan gray inner fill of the Serenitatis basin is younger than the dark blue gray annulus; the latter continues into and appears to be contemporaneous with the fill of Mare Tranquillitatis. Mare ridges occur in both the inner basin fill and the dark annulus of Serenitatis. Ridges are interpreted as the result of structural deformation and up-doming after the solidification of the basaltic lavas. On the southeastern rim of the Serenitatis basin is the darkes blue gray unit within which Apollo 17 landed. Highland massifs surrounding this unit have unstable slopes which are believed to be the result of localized tectonic activity. On the southwest rim of the basin are the dark tan to brown gray mantling materials of the Sulpicius Gallus Formation. Farther west on the rim are dark blue grap patches which resemble the mare material of the Serenitatis dark annulus.

El-Baz, F.↗
NASA NTRS1974

Study of a flight monitor for jet engine disk cracks using the critical length criterion of fracture mechanics

A disk crack detector is discussed which is intended to operate while in flight. The crack detector monitors the disk rim for radial surface cracks emanating from the blade root interface. An eddy current type sensor with a remotely located capacitance-resistance bridge and signal analyzer is able to detect reliably a simulated crack 1/8 in. long. The sensor was tested at rim velocities of 600 fps and at 1000 F. Fracture mechanics is used to calculate the critical crack length. Knowledge of the crack growth rate permits the calculation of the number of stress cycles remaining for the detected crack to grow to critical size. A plot is presented of the remaining life as a function of the critical crack length and the operating stress. It is shown that for a disk of Inconel 718 a through-the-thickness crack operating under a rim stress of 50 kpsi has a critical length of 0.7-in. and a remaining life of 130 flights.

Barranger, J. P.↗
NASA NTRS1975

The Annular Momentum Control Device (AMCD)

An annular momentum control device consisting principally of a spinning rim, a set of noncontacting magnetic bearings for supporting the rim, a noncontacting electric motor for driving the rim, and, for some applications, one or more gimbals is described. The device is intended for applications where requirements for control torque and momentum storage exist. Hardware requirements and potential unit configurations are discussed. Theoretical considerations for the passive use of the device are discussed. Potential applications of the device in other than passive configurations for the attitude control, stabilization, and maneuvering of spacecraft are reported.

Anderson, W. W.↗
NASA NTRS1974

Ejecta from large craters on the moon - Comments on the geometric model of McGetchin et al

Amendments to a quantitative scheme developed by T. R. McGetchin et al. (1973) for predicting the distribution of ejecta from lunar basins yield substantially thicker estimates of ejecta, deposited at the basin rim-crest and at varying ranges beyond, than does the original model. Estimates of the total volume of material ejected from a basin, illustrated by Imbrium, also are much greater. Because many uncertainties affect any geometric model developed primarily from terrestrial analogs of lunar craters, predictions of ejecta thickness and volume on the moon may range within at least an order of magnitude. These problems are exemplified by the variability of T, thickness of ejecta at the rim-crest of terrestrial experimental craters. The proportion of T to crater rim-height depends critically upon scaled depth-of-burst and whether the explosive is nuclear or chemical.

Pike, R. J.↗
NASA NTRS1976

Floor-fractured lunar craters

Observational data concerning floor-fractured craters on the lunar near and far sides are examined, including the morphologic classification of the craters, their spatial and size distributions, and their floor, peak, and rim elevations relative to the maria. Six morphologic classes and two subclasses are delineated on the basis of fracture pattern, crater floor depth, and floor type. These data are used to reconstruct a history of crater modification which accounts for the large differences in affected crater size and age, the small peak-rim elevation differences, remnant central peaks within mare-flooded craters and ringed plains, ridged and flat-topped rim profiles of heavily modified craters and ringed plains, as well as the absence of positive gravity anomalies in most floor-fractured craters and some large mare-filled craters. The results indicate that: (1) impact craters became centers of intrusions and volcanism generally related to periods of basin inundation by mare basalts; (2) some light-plains units in the highlands may be due to both impact ejecta and extrusions of light-colored lava or ash; (3) floor-fractured craters may have become important volcanic vents that contributed to the inundation of the lunar surface by mare basalts; and (4) the lunar highlands probably did not fully escape the epochs of mare flooding.

Schultz, P. H.↗
NASA NTRS1976

Multiple ring structures and the problem of correlation between lunar basins

Comparison of multi-ringed, mare-filled basins on the nearside of the moon indicates that a simple one-to-one correspondence of all rings between lunar basins does not exist. The only rings which can be correlated reasonably well between such basins are concentric systems of mare ridges and basin rims, and the frequently cited square-root-of-2 spacing relationship does not correctly describe their spacing. It is concluded that the Cordillera is the rim of the Orientale Basin and is equivalent to the 1340 km diameter ring of the Imbrium Basin and the rims of the other mare-filled basins. The area between the Rook and Cordillera rings is believed equivalent to the marginal shelf areas of the more completely mare-filled basins. A circular arc approximately 520 km diameter located just inside the outer Rook Ring would have been the most likely site for formation of a concentric system of mare ridges, had filling of the Orientale Basin been complete.

Brennan, W. J.↗
NASA NTRS1976

Missile impact craters (White Sands Missile Range, New Mexico) and applications to lunar research: Contributions to astrogeology

Craters in natural materials at White Sands Missile Range, N. Mex., were produced by the impact of high-velocity to hypervelocity missiles traveling along oblique trajectories with kinetic energies between 2.1 and 81 × 1014 ergs. The oblique impacts produce craters 2 to 10 m across with morphologies and ejecta that are bilaterally symmetrical with respect to the plane of the missile trajectory. Rims are high and the amount of ejecta large in down-trajectory and lateral directions, whereas rims are low to nonexistent and ejecta thin to absent up-trajectory. Symmetry development and modifications of the symmetry are a function of target material, local topography, and angle of impact. Seven mappable units can be recognized in and around the craters. Three of these are ejecta: thick ejecta near the crater, thin to discontinuous ejecta at greater distances, and scattered ejecta at the greatest distances to the limit of throwout. These ejecta units may be absent on the up-trajectory side; if present, they are rarely as thick or continuous as on other sides of the crater. Three units are target materials: undeformed target material exposed in local patches through thin to discontinuous ejecta and everywhere between the fragments of scattered ejecta, tilted and broken target material exposed in upper crater walls, and shattered and fractured target material exposed on the up-trajectory crater wall. The seventh unit is slope material composed of talus and fallback within the crater. Development, character, and exposure of these units varies chiefly with the target material. Ejecta from the craters is chiefly broken but relatively undeformed target material that may range in size from very fine grained debris to large blocks. Where the target is porous, significant amounts of the ejecta are composed of sheared and compressed fragments, some coated with dark layers of mixed projectile pieces, powder, and fused metal mixed with crushed target material. For layered targets, the original stratigraphic sequence is crudely preserved and in inverted order in thick ejecta. Secondary impact craters are produced by the impact of ejected fragments when the surrounding surface materials are sufficiently weak. A wide variety of secondary impact crater relations may result. Secondary craters nearest the primary crater have blocks in them that are larger than or the same size as the crater they produced. Farther from the primary crater, the fragments are generally smaller than the secondary crater and are ejected from it. Excavation of four craters revealed a mixed breccia beneath the crater floor composed of missile pieces, sheared and compressed target material, and crushed debris. Banded, disaggregated target material and nonmixed breccia surrounded the mixed breccia, and these breccias were surrounded by a zone of conjugate fractures. Beneath the ejecta on the lateral and down-trajectory crater flanks, the target materials were tilted upward and broken. Up-trajectory, open fractures and downward displacement occurred in two of the craters. No displacement was observed for the other two. Beneath the down-trajectory rims of craters with distinct layering, overturned synclines were observed. Missile breakup and behavior during cratering are a function of target and missile properties. Missile breakup depends on missile velocity and is most extensive at high velocities, where the missile is fragmented, powdered, and partly fused. Burial of missile or its fragmented, powdered, and fused remains is greatest for porous targets and least for dense cohesive targets. For very porous targets, camouflet structures containing the fragmented missile may form. Least squares fit to the data on craters in dry to moist targets indicate V(a) = 10^(-11.433)E(p)^(1.205) where V(a) is the volume of the apparent crater and E(p) is the kinetic energy of the missile. This equation is consistent with expectations of the equations relating apparent depth and radius to kinetic energy. Extrapolation of displaced masses and kinetic energies for laboratory impacts with sand and rock converge near 10^(15) to 10^(16) ergs, where the extrapolations are near the data on missile impact craters, corrected for impact angle. Displaced masses of craters produced by missile impacts and by chemical explosives with small scaled depths of burial are about the same when the kinetic energies of the missiles (corrected for angle of impact) are equal to the TNT equivalent energy of the explosive. The problem of equivalent scaled depth of burst for an impact crater is complicated and not entirely resolved, however. Both missile impact craters and chemical explosive craters in water-saturated targets are larger than their counterparts in dry to moist materials. Data collected during the study of missile impact craters have helped resolve a number of problems in lunar research: (1) the soillike nature of lunar surface materials was predicted, (2) sizes of craters produced by artificial impacts were correctly predicted, (3) certain features imaged by Surveyor were found to be analogous to features associated with missile impact craters, {4) missile impacts were used in support of the Apollo passive seismic experiment, (5) craters seen in Apollo orbital photographs were found to be similar to some missile impact craters, (6) missile impact craters supplied data on sample collection and crater phenomenology used in training astronauts, and (7) some returned lunar samples are similar to coated, sheared, and compressed fragments ejected from missile impact craters.

H. J. Moore↗
NASA NTRS1978

Fixed-base and two-body equations of motion for an Annular Momentum Control Device (AMCD)

Fixed base and two body equations of motion for an Annular Momentum Control Device (AMCD) are presented. An AMCD consists of a spinning annular rim which is suspended by noncontacting magnetic bearings and powered by a noncontacting linear electromagnetic motor. The fixed base equations are for a rigid AMCD rim suspended by magnetic bearings attached to a rigid fixed base. The two body equations are for a rigid AMCD rim suspended by magnetic bearings attached to a rigid body spacecraft. The fixed base equations are applicable to any potential ground based AMCD application such as energy storage.

Groom, N. J.↗
NASA NTRS1978

Formation of lunar basin rings

The outer rings of impact basins are interpreted as the bounding rings of the excavated basin cavities analogous to Copernicus-type crater rim crests. It is suggested that the inner rings are strata from depth uplifted during excavation of the transient cavity. Spacing relations and morphology appear to indicate a transition from central peaks to rings but not from terraces to rings. Evidence related to terrestrial craters with rings or peaks produced by meteorite impacts suggests that one or more crater rims may form inside the main, outer crater rim, resulting in nested craters. There is some evidence that peaks grade into inner rings as material is ejected from their cores in progressively larger impacts. Multiply layered materials may produce multiple rings by differential excavation of the layers.

Hodges, C. A.↗