Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rankine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Numerical solutions of several reflected shock-wave flow fields with nonequilibrium chemical reactions

The method of characteristics for a chemically reacting gas is used in the construction of the time-dependent, one-dimensional flow field resulting from the normal reflection of an incident shock wave at the end wall of a shock tube. Nonequilibrium chemical reactions are allowed behind both the incident and reflected shock waves. All the solutions are evaluated for oxygen, but the results are generally representative of any inviscid, nonconducting, and nonradiating diatomic gas. The solutions clearly show that: (1) both the incident- and reflected-shock chemical relaxation times are important in governing the time to attain steady state thermodynamic properties; and (2) adjacent to the end wall, an excess-entropy layer develops wherein the steady state values of all the thermodynamic variables except pressure differ significantly from their corresponding Rankine-Hugoniot equilibrium values.

Hanson, R. K.↗
NASA NTRS1972

Ogo 5 magnetic-field data near the earth's bow shock - A correlation with theory.

Magnetic-field data obtained in the earth's bow-shock region with a high-resolution triaxial fluxgate magnetometer aboard the Ogo 5 satellite have been correlated with a theory of Tidman and Northrop (1968). These authors have shown that either of two hypotheses about the nature of low-frequency magnetic waves could be invoked to explain previous observations. We have observed exponentially decaying upstream waves that are consistent with only one of these hypotheses. This observation allows use of the theory to infer the local shock velocity and frequency of driving currents within the shock. This method of finding the shock velocity is less sensitive to errors in the plasma parameters than is the method based on the Rankine-Hugoniot relations.

Guha, J. K.↗
NASA NTRS1972

Influence of thermal anisotropy on best-fit estimates of shock normals.

This paper deals with the influence of thermal anisotropy on least-squares estimates of interplanetary shock parameters and the associated normals by using the Rankine-Hugoniot equations. A practical theorem is given for quantitatively correcting for anisotropic effects by weighting the before and after magnetic fields by the same 'anisotropy parameter' h. The quantity h depends only on the thermal anisotropies before and after the shock and on the angles between the magnetic fields and the shock normal. It is shown that, for fast shocks and for a liberal range of realistic conditions, the quantity h lies in the range from 0.90 to 1.22. The theorem can also be applied to most slow shocks, but in those instances h usually should be lower and sometimes markedly lower than unity.

Lepping, R. P.↗
NASA NTRS1972

A two-spacecraft test of a single spacecraft method of estimating shock normals

By assuming the validity of a subset of the Rankine-Hugoniot conservation relations for interplanetary (IP) shocks in an isotropic medium it has been demonstrated, in principle, that improved shock normals can be calculated by using a least-squares technique on combined magnetic field and plasma data from a single spacecraft. The scheme uses those six conservation relations not involving pressure and temperature. This paper deals with a test of the scheme by examining in detail a shock across which the magnetic field changed direction by a small amount (approximately 10 deg). On January 26, 1968 at about 1430 UT this shock was observed by the plasma and magnetic field instruments in Explorers 33 and 35. The spacecraft were 76.6 and 56.9 R sub E sunward of the earth, respectively (and 43.5 R sub E from each other), and therefore well outside the earth's bow shock region, a necessary condition for a valid test.

Lepping, R. P.↗
NASA NTRS1972

Reinterpretation of the Pioneer 6 bow shock crossing.

This paper re-examines and reinterprets the interesting bow shock crossing of Pioneer 6 on December 16, 1965, by combining the high-resolution data for the magnetic field measurements with all the available plasma data. It is shown that, although a small correction of the magnetic field data improves the validity test of the MHD Rankine-Hugoniot (R-H) conditions, it is the plasma density measurements that are the principal source of the remaining inconsistencies. With the exception of the densities, the best agreement between the measurements and the R-H relations is obtained when the specific heat ratio is slightly less than the classical value of 5/3 expected for a magnetized plasma in the magnetosheath. A more accurate shock normal determination has been made, and it is found that the shock itself is possibly in motion with respect to the earth and that locally it may be approximated as a normal shock.

Mariani, F.↗
NASA NTRS1972

Recent materials compatibility studies in refractory metal-alkali metal systems for space power applications.

Advanced Rankine and other proposed space power systems utilize refractory metals in contact with both single-phase and two-phase alkali metals at elevated temperatures. A number of recent compatibility experiments are described which emphasize the excellent compatibility of refractory metals with the alkali metals, lithium, sodium, and potassium, under a variety of environmental conditions. The alkali metal compatibilities of tantalum-, columbium-, molybdenum-, and tungsten-base alloys are discussed.

Harrison, R. W.↗
NASA NTRS1974

Numerical computation of two dimensional viscous blunt body flows with an impinging shock, part 2

Two-dimensional viscous blunt body flows with an impinging shock have been computed using a time-dependent finite-difference method which solves the complete set of Navier-Stokes equations for a compressible flow. For low Reynolds number flows, the entire flow field, including the bow shock and impinging shock, has been captured in the computation. For higher Reynolds number flows, the bow shock is treated as a discontinuity across which the Rankine-Hugoniot equations are applied, while the boundary layer and interaction regions are captured as before. Using this latter shock-fitting approach, a Type III shock interaction flow field has been computed with flow conditions corresponding to the space shuttle orbiter freestream conditions at 61 km (200,000 ft).

Holst, T. L.↗
NASA NTRS1973

Demonstration of a pulsing liquid hydrogen/liquid oxygen thruster

The development of an injector/thruster concept capable of pulsing a liquid hydrogen/liquid oxygen attitude control propulsion system thruster over thrust and chamber-pressure ranges of 625 to 1250 lbF and 250 to 500 psia, respectively, is discussed. It is shown how continuing search for a simple light-weight, high-performance reaction control system concept led to successful operation tests at cryogenic propellant temperatures (150 and 45 degrees Rankine for oxygen and hydrogen, respectively). The analytical and experimental phases of the liquid/liquid thruster technology efforts are examined.

Herr, P. N.↗
NASA NTRS1973

Interrelated structures of the transport shock and collisional relaxation layer in a multitemperature, multilevel ionized gas

The gas dynamic structures of the transport shock and the downstream collisional relaxation layer are evaluated for partially ionized monatomic gases. Elastic and inelastic collisional nonequilibrium effects are taken into consideration. In the microscopic model of the atom, three electronic levels are accounted for. By using an asymptotic technique, the shock morphology is found on a continuum flow basis. This procedure gives two distinct layers in which the nonequilibrium effects to be considered are different. A transport shock appears as the inner solution to an outer collisional relaxation layer. The results show four main interesting points: (1) on structuring the transport shock, ionization and excitation rates must be included in the formulation, since the flow is not frozen with respect to the population of the different electronic levels; (2) an electron temperature precursor appears at the beginning of the transport shock; (3) the collisional layer is rationally reduced to quadrature for special initial conditions, which (4) are obtained from new Rankine-Hugoniot relations for the inner shock.

Vinolo, A. R.↗
NASA NTRS1974

Hypervelocity impact heating of porous aluminum

Estimates of the thermal energy and other properties of the postshock condition are obtained for porous aluminum targets impacted by iron or aluminum projectiles, in the shock pressure range between about 0.4 and 8 Mbar. The starting point is the determination of a distinct Hugoniot equation for each value of porosity, from available experimental data. Rankine-Hugoniot equations and a Mie-Gruneisen equation of state supply the relations necessary for finding the thermodynamic properties of adiabatically relaxed materials. The results are of interest in such fields as ablation studies, meteoritics, and lunar topography.

Rehfuss, D. E.↗
NASA NTRS1974

Status of the NASA-Lewis flat-plate collector tests with a solar simulator

Simulator test results of 15 collector types are presented. Collectors are given performance ratings according to their use for pool heating, hot water, absorption A/C or heating, and solar Rankine machines. Collectors found to be good performers in the above categories, except for pool heating, were a black nickel coated, 2 glass collector, and a black paint 2 glass collector containing a mylar honeycomb. For pool heating, a black paint, one glass collector was found to be the best performer. Collector performance parameters of 5 collector types were determined to aid in explaining the factors that govern performance. The two factors that had the greatest effect on collector performance were the collector heat loss and the coating absorptivity.

Simon, F. F.↗
NASA NTRS1975

Technology of forced flow and once-through boiling: A survey

Representative boiling heat transfer and pressure drop information obtained primarily from past NASA and AEC programs is presented which is applicable to forced flow and once-through boiler systems. The forced convection boiler has a number of advantages: little possibility of flow mal-distribution; heat transfer characteristics are usually consistent; and conductances are predictable, so that higher heat fluxes may be employed with safety (which leads to more compact, lighter weight equipment). It was found that in gas-fired systems particularly, the controlling heat transfer resistance may be on the hot side, so that increased fluxes would require extended surfaces. If in a power generation system the working fluid is very expensive, a forced flow boiler can be designed especially for small holdup volume. If the fluid is temperature sensitive, the boiling side wall temperatures can be tailored to maintain maximum heat transfer rates without overheating the fluid. The forced flow and once-through configurations may be the only type which can satisfy a specific need (such as the automotive Rankine cycle power plant design having a very short time-response boiler).

Poppendieck, H. F.↗
NASA NTRS1975

System analysis of a piston steam engine employing the uniflow principle, a study in optimized performance

Results are reported which were obtained from a mathematical model of a generalized piston steam engine configuration employing the uniflow principal. The model accounted for the effects of clearance volume, compression work, and release volume. A simple solution is presented which characterizes optimum performance of the steam engine, based on miles per gallon. Development of the mathematical model is presented. The relationship between efficiency and miles per gallon is developed. An approach to steam car analysis and design is presented which has purpose rather than lucky hopefulness. A practical engine design is proposed which correlates to the definition of the type engine used. This engine integrates several system components into the engine structure. All conclusions relate to the classical Rankine Cycle.

Peoples, J. A.↗
NASA NTRS1975

A numerical determination of the bow shock wave in transonic axisymmetric flow about blunt bodies

A numerical method was developed for calculating axisymmetric transonic (M greater than 1) flow about a blunt body; the bow shock wave location was investigated. A Rankine-Hugoniot jump was applied at the shock while relaxation on the isentropic equation of motion was used between shock and body. The shock wave is adjusted by a Newton type iteration scheme. Results are given for a sphere in the Mach number range 1.62 down to 1.02.

Jones, D. J.↗
NASA NTRS1975

Liquid-metal binary cycles for stationary power

The use of topping cycles to increase electric power plant efficiency is discussed, with particular attention to mercury and alkali metal Rankine cycle systems that could be considered for topping cycle applications. An overview of this technology, possible system applications, the required development, and possible problem areas is presented.

Gutstein, M.↗
NASA NTRS1975

Solar collector performance evaluation with the NASA-Lewis solar simulator-results for an all-glass-evacuated-tubular selectively-coated collector with a diffuse reflector

A solar collector was tested in a solar simulator for inlet temperatures of temperatures of 70 to 200 F, flux levels of 230 and rate of 7 lb/(hr)(sq. ft), and incident angles of 0 deg, 33 deg, and 52 deg. Test results plotted in a form suggested by analysis indicate a very low heat loss coefficient. The collector shows excellent performance on an all-day performance basis, and also for conditions corresponding to temperatures required in solar Rankine systems and/or for low flux level radiation.

Simon, F.↗
NASA NTRS1975

Forced-flow once-through boilers

A compilation and review of NASA-sponsored research on boilers for use in spacecraft electrical power generation systems is presented. Emphasis is on the heat-transfer and fluid-flow problems. In addition to space applications, much of the boiler technology is applicable to terrestrial and marine uses such as vehicular power, electrical power generation, vapor generation, and heating and cooling. Related research areas are discussed such as condensation, cavitation, line and boiler dynamics, the SNAP-8 project (Mercury-Rankine cycle), and conventional terrestrial boilers (either supercritical or gravity-assisted liquid-vapor separation types). The research effort was directed at developing the technology for once-through compact boilers with high heat fluxes to generate dry vapor stably, without utilizing gravity for phase separations. A background section that discusses, tutorially, the complex aspects of the boiling process is presented. Discussions of tests on alkali metals are interspersed with those on water and other fluids on a phenomenological basis.

Stone, J. R.↗