Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reaction diffusion systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Electrochemistry of the NaI-AlBr 3 Molten Salt System: A Redox-Active, Low-Temperature Molten Salt Electrolyte

NaI-AlBr 3 is a very appealing low melting temperature (<100 °C), salt system for use as an electrochemically-active electrolyte. This system was investigated for its electrochemical and physical properties with focus to energy storage considerations. A simple phase diagram was generated; at >100 °C, lower NaI concentrations had two partially miscible liquid phases, while higher NaI concentrations had solid particles. Considering the fully molten regime, electrical conductivities were evaluated over 5–25 mol% NaI and 110 °C–140 °C. Conductivities of 6.8–38.9 mS cm −1 were observed, increasing with temperature and NaI concentration. Effective diffusion coefficients of the I − /I 3 − redox species were found to decrease with both increasing NaI concentration and increasing applied potential. Regardless, oxidation current density at 3.6 V vs Na/Na + was observed to increase with increasing NaI concentration over 5–25 mol%. Finally, the critical interface between the molten salt electrolyte and electrode materials was found to significantly affect reaction kinetics. When carbon was used instead of tungsten, an adsorbed species, most likely I 2 , blocked surface sites and significantly decreased current densities at high potentials. This study shows the NaI-AlBr 3 system offers an attractive, low-temperature molten salt electrolyte that could be useful to many applied systems, though composition and electrode material must be considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Stream lamination and rapid mixing in a microfluidic jet for X-ray spectroscopy studies

Microfluidic mixers offer new possibilities for the study of fast reaction kinetics down to the microsecond time scale, and methods such as soft X-ray absorption spectroscopy are powerful analysis techniques. These systems impose challenging constraints on mixing time scales, sample volume, detection region size and component materials. The current work presents a novel micromixer and jet device which aims to address these limitations. The system uses a so-called ‘theta’ mixer consisting of two sintered and fused glass capillaries. Sample and carrier fluids are injected separately into the inlets of the adjacent capillaries. At the downstream end, the two streams exit two micron-scale adjoining nozzles and form a single free-standing jet. The flow-rate difference between the two streams results in the rapid acceleration and lamination of the sample stream. This creates a small transverse dimension and induces diffusive mixing of the sample and carrier stream solutions within a time scale of 0.9 microseconds. The reaction occurs at or very near a free surface so that reactants and products are more directly accessible to interrogation using soft X-ray. We use a simple diffusion model and quantitative measurements of fluorescence quenching (of fluorescein with potassium iodide) to characterize the mixing dynamics across flow-rate ratios.

Huyke, Diego A. (ORCID:0000000283356613)↗
DOE OSTI2021

Analysis of the Reactive CO 2 Surface Flux in Electrocatalytic Aqueous Flow Reactors

We study how the mass transfer of a chemical species in shear flow is suppressed by the production of a second species that partially reacts away the first species. The second species is produced at the surface with the first species as a reactant. Our work is directly motivated by electrochemical CO 2 reduction in aqueous flow reactors, where OH– molecules generated by the CO evolution reaction react away CO 2 molecules, ultimately inhibiting the mass transfer of CO 2 to the cathode surface. We derive a simple approximation of the Sherwood number, a dimensionless measure of the mass flux into the surface, as a function of the Péclet number, surface Damköhler number, and bulk Damköhler number, and we compare our approximation to numerical solutions of the governing equations. We find that in the diffusion-limited regime, the Sherwood number is well described by the classical Graetz-Lévêque result reduced by a reaction factor due to the competing bulk reaction; with the stoichiometry relevant to electrochemical CO 2 reduction, this reaction factor is 1/2. While the model problem we solve provides insight into how OH– production affects CO 2 mass transfer, experimental systems often involve more complex chemistry. We thus also show how a common buffered electrolyte, KHCO 3 , affects our results.

30 DIRECT ENERGY CONVERSION↗
NASA NTRSDate not supplied

Particulate Emission and Optical Measurements in n-Heptane Low-Swirl Non-Premixed Flames at Elevated Pressures

A series of ground combustion tests conducted at elevated pressures demonstrates in-chamber optical measurements of soot emissions, combined with conventional gaseous and particle emissions sampling techniques. Utilizing a micro-radial-entry counter-swirl (MRX) burner, we successfully stabilized an n-heptane low-swirl, non-premixed spray flame across a wide range of equivalence ratios at pressures reaching 250 psia. Our optical diagnostics feature a temporally gated diffused-backlight illumination extinction imaging (DBI-EI) system, equipped with a 470-nm strobe high-intensity LED array as the illumination source, along with a line-of-sight telecentric camera. By accessing the flame tube, the pulsed DBI-EI provides illuminating optical extinction images, enabling experimental estimation of soot volume fractions within the reaction zone. This imaging technique will allow for real-time observation of soot formation dynamics occurring above the air-blast fuel injector. To further enhance our analysis, we employed simultaneous gaseous and particulate extractive diagnostics, interpreting in-flame particulate information through CO2 sampling, exhaust particle sizing, and particle counting. The processed dataset reveals a promising application of DBI-EI for propulsion emission analysis in high-pressure environments, where optical beam-steering effects can significantly impact results. This report is essential to bridging the divide between in-flame optical diagnostics and exhaust extractive measurements. By achieving an understanding of non-premixed combustion emission characteristics, we attempt to provide invaluable data for computer code validation, advancing the field of combustion research and supporting the development of cleaner, more efficient engines.

high-pressure flame↗
NASA NTRSDate not supplied

Particulate Emission and Optical Measurements in n-Heptane Low-Swirl Non-Premixed Flames at Elevated Pressures

A series of ground combustion tests conducted at elevated pressures demonstrates in-chamber optical measurements of soot emissions, combined with conventional gaseous and particle emissions sampling techniques. Utilizing a micro-radial-entry counter-swirl (MRX) burner, we successfully stabilized an n-heptane low-swirl, non-premixed spray flame across a wide range of equivalence ratios at pressures reaching 250 psia. Our optical diagnostics feature a temporally gated diffused-backlight illumination extinction imaging (DBI-EI) system, equipped with a 470-nm strobe high-intensity LED array as the illumination source, along with a line-of-sight telecentric camera. By accessing the flame tube, the pulsed DBI-EI provides illuminating optical extinction images, enabling experimental estimation of soot volume fractions within the reaction zone. This imaging technique will allow for real-time observation of soot formation dynamics occurring above the air-blast fuel injector. To further enhance our analysis, we employed simultaneous gaseous and particulate extractive diagnostics, interpreting in-flame particulate information through CO2 sampling, exhaust particle sizing, and particle counting. The processed dataset reveals a promising application of DBI-EI for propulsion emission analysis in high-pressure environments, where optical beam-steering effects can significantly impact results. This report is essential to bridging the divide between in-flame optical diagnostics and exhaust extractive measurements. By achieving an understanding of non-premixed combustion emission characteristics, we attempt to provide invaluable data for computer code validation, advancing the field of combustion research and supporting the development of cleaner, more efficient engines.

high-pressure flame↗
DOE OSTI2021

Defect-Driven Oxide Transformations and the Electrochemical Interphase

The redox reaction pathway is crucial to the sustainable production of the fuels and chemicals required for a carbon-neutral society. Our society is becoming increasingly dependent on devices using batteries and electrolyzers, all of which rely on a series of redox reactions. The overall properties of oxide materials make them very well suited for such electrochemical and catalytic applications due to their associated cationic redox properties and the static site-adsorbate interactions. As these technologies have matured, it has become apparent that defect-driven redox reactions, defect-coupled diffusion, and structural transformations that are both time- and rate-dependent are also critical materials processes. This change in focus, considering not only redox properties but also more complex, dynamic behaviors, represents a new research frontier in the molecular sciences as they are strongly linked to device operation and degradation and lie at the heart of various phenomena that take place at electrochemical interfaces. Fundamental studies of the structural, electronic, and chemical transformation mechanisms are key to the advancement of materials and technological innovations that could be implemented in various electrochemical systems. In this Account, we focus on recent studies and advances in characterizing and understanding the dynamic redox evolution and structural transformations that take place in model perovskites and layered oxides under reactive conditions and correlate them with degradation mechanisms and operations in electrolyzers and batteries. We show that the dynamic evolution of oxygen vacancies and cationic migration in the surface or bulk occurs at the solid-liquid interface, using a combination of different synchrotron-based Xray spectroscopies and scattering probes. Detailed redox-structure-reactivity correlation studies show how defects and diffusion processes can be tailored to drive various physical and chemical transformations in electrolyzers and batteries. We also highlight a strong correlation between oxygen redox reactivity and structural reorganization in both model thin films and particles, helping to bridge the gap between fundamental studies of the reaction mechanism and device applications. Finally, on the basis of these findings, we discuss strategies to probe and tune the redox reactivity and structural stability of the redox-active oxide interphase toward devising efficient pathways for energy and chemical harvesting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1984

Reaction of amorphous Ni-W and Ni-N-W films with substrate silicon

Wiley et al. (1982) have studied sputtered amorphous films of Nb-Ni, Mo-Ni, Si-W, and Si-Mo. Kung et al. (1984) have found that amorphous Ni-Mo films as diffusion barriers between multilayer metallizations on silicon demonstrate good electrical and thermal stability. In the present investigation, the Ni-W system was selected because it is similar to the Ni-Mo system. However, W has a higher silicide formation temperature than Mo. Attention is given to aspects of sample preparation, sample characterization, the interaction between amorphous Ni-W films and Si, the crystallization of amorphous Ni(36)W(64) films on SiO2, amorphous Ni-N-W films, silicide formation and phase separation, and the crystallization of amorphous Ni(36)W(64) and Ni(30)N(21)W(49) layers.

Zhu, M. F.↗
DOE OSTI2025

Multicationic interactions mitigating lattice strain in sodium layered cathodes

Transition-metal (TM) layered oxides have emerged as the primary cathode choice for sodium-ion batteries (SIBs) due to their high energy density and sustainable chemistry using non-critical elements. However, their anisotropic lattice strain and stress accumulation during (de)sodiation lead to severe structural degradation, yet an intrinsic strain-depressant approach remains elusive. Herein, we propose entropy regulation with zero Li/Co usage to mitigate harmful lattice displacements and enhance the electrochemical performance of sodium layered cathodes. Our findings demonstrate that high entropy design effectively inhibits TMO 6 octahedra distortions upon cycling, as evidenced by hard X-ray absorption spectroscopy, greatly reducing near-surface structural deconstruction and interface side reactions. Furthermore, multicationic interactions driven by configurational entropy thermodynamically mitigate the formation of oxygen defects and strengthen ligand-to-metal coordination. The complementarity inherent in charge compensation within complex systems is unveiled and the restrained lattice parameters deviations without interior volume residuals are successfully achieved. As a result, the multicationic cathode exhibits improved cycling stability and Na + diffusion kinetics in both half and full cells. The cathode chemistries outlined here broaden the prospects for lattice engineering to alleviate bulk fatigue and open up the possibility to develop an economically viable layered oxides with long durability.

Wang, Haoji [Central South University, Changsha (C↗
NASA NTRS1991

Organic synthesis in the outer Solar System: Recent laboratory simulations for Titan, the Jovian planets, Triton and comets

We tabulate the most abundant gases and their radiation yields, for two experimental pressures: 0.24 mb, more relevant to upper atmosphere excitation, and 17 mb, more relevant to tropospheric, cosmic ray excitation. The yields computed in the 0.24 mb experiment combined with measured electronic fluxes and a simple, eddy diffusion model of Titan's atmosphere predict abundances of detected molecules in agreement with those found by Voyager and for heavier products, in somewhat better agreement with observation than photochemical absolute reaction rate kinetics models. All Voyager organics are accounted for and no detectable products are found that Voyager did not detect. A striking increase of products with multiple bonds is found with decreasing pressure. Hydrocarbon abundances decline slowly with increasing carbon number. Additionally, we list preliminary estimates for the yield of the heteropolymer, which seems to be produced in a quantity comparable (in moles of C+N consumed) to the total amount of gaseous product. The production rate required to sustain Titan's haze against sedimentation also indicates yields of this order. As can be seen from the table, over 10(exp 9) years substantial amounts of these products can accumulate on the surface -- ranging from cm thickness for the (C+N equals 4) species to a meter or more for HCN and C2H2; we also expect a meter or more of tholins. Similar analyses have been or are being done for the Jovian planets and Triton. Charged particle irradiation of hydrocarbon clathrates or mixed hydrocarbon/water ices produces a range of organic products, reddening and darkening of the ices and characteristic infrared spectra. From such spectra, the predicted emission by fine particles in cometary comae well-matches the observed 3.4 micron emission spectra of Comet Halley and other recent comets. Heliocentric evolution of organic emission features in comets is predicted. Organic products of such ice irradiation may account for colors and albedos on some of the satellites in the outer solar system, especially Triton and Pluto, where solid methane is known to exist.

Sagan, C.↗
DOE OSTI2023

Photoexcitation of Fe 3 O Nodes in MOF Drives Water Oxidation at pH=1 When Ru Catalyst Is Present

Abstract Artificial photosynthesis strives to convert the energy of sunlight into sustainable, eco‐friendly solar fuels. However, systems with light‐driven water oxidation reaction (WOR) at pH=1 are rare. Broadly used [Ru(bpy) 3 ] 2+ (bpy=2,2’‐bipyridine) photosensitizer has a fixed +1.23 V potential which is insufficient to drive most water oxidation catalysts (WOCs) in acid, while Fe 2 O 3 , featuring the highly oxidizing holes, is not stable at low pH. Here, the key examples of Fe‐based metal–organic framework (MOF) water oxidation photoelectrocatalysts active at pH=1 are presented. Fe‐MIL‐126 and Fe MOF‐dcbpy structures were formed with 4,4’‐biphenyl dicarboxylate (bpdc), 2,2’‐bipyridine‐5,5’‐dicarboxylate (dcbpy) linkers and their mixtures. Presence of dcbpy linkers allows integration of metal‐based catalysts via coordination to 2,2’‐bipyridine fragments. Fe‐based MOFs were doped with Ru‐based precursors to achieve highly active MOFs bearing [Ru(bpy)(dcbpy)(H 2 O) 2 ] 2+ WOC. Materials were analyzed with X‐ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infra‐red (FTIR) spectroscopy, resonance Raman, X‐ray absorption spectroscopy, fs optical pump‐probe, electron paramagnetic resonance (EPR), diffuse reflectance and electric conductivity measurements and were modeled by band structure calculations. It is shown that under reaction conditions, Fe III and Ru III oxidation states are present, indicating rate‐limiting electron transfer in MOF. Fe 3 O nodes emerge as photosensitizers able to drive prolonged O 2 evolution in acid. Further developments are possible via MOF's linker modification for enhanced light absorption, electrical conductivity, reduced MOF solubility in acid, Ru‐WOC modification for faster WOC catalysis, or Ru‐WOC substitution to 3d metal‐based systems. The findings give further insight for development of light‐driven water splitting systems based on Earth‐abundant metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Overcoming limitations in propanedehydrogenation by codesigning catalyst-membrane systems

Propylene production through propane dehydrogenation (PDH) is endothermic, and high temperatures required to achieve acceptable propane conversions lead to low selectivity and severe carbon-induced deactivation of conventional catalysts. We developed a catalyst-membrane system that removes the hydrogen by-product and can thus achieve propane conversions that exceed equilibrium limits. In this codesigned system, a silica/alumina (SiO 2 /Al 2 O 3 ) hollow-fiber hydrogen membrane was packed with a selective platinum-tin (Pt 1 Sn 1 /SiO 2 ) PDH catalyst on the tube side with hydrogen diffusing from the tube to the shell side. We demonstrate that the catalyst-membrane system can achieve propane conversions >140% of the nominal equilibrium conversion with a propylene selectivity >98% without deactivation of the system components. Here, we also show that by introducing oxygen on the shell side of the catalyst-membrane system, we can couple the endothermic PDH reaction on the tube side with exothermic hydrogen oxidation on the shell side. This coupling results in higher rates of hydrogen transport, leading to further enhancements in the propane conversion as well as desired thermoneutral system operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Utilization of 29Si MAS-NMR to Understand Solid State Diffusion in Energy Storage Materials

The properties of many solid-state materials arise from critical interfaces tied to the structure, morphology, and composition of the materials under study. For many materials, identifying components that may be invisible to diffraction techniques or other bulk sensitive techniques (i.e. inductively coupled plasma (ICP)), may cause important information to be overlooked. These can include grain boundary phases, nanoscale coatings, amorphous layers, or second phases that influence the materials environment. In this short review, the use of 29 Si MAS NMR as a local probe to detect silicon-containing phases in complex energy storage systems is explored with a focus is on silicon-containing materials and silicon electrodes. Examples highlighting the utility of 29 Si MAS NMR include 1) examining copper diffusion into silicon as a method to create 3 dimensional electrodes, 2) using Mg(II) electrolyte additives to create in-situ nanoscale silicide coatings to inhibit low voltage parasitic side reactions and extend calendar life, and 3) studying the lithiation reactions of passivated silicon on different time scales.

Dogan, Fulya↗
NASA NTRS1983

Numerical study of a ramjet dump combustor flow field

Increased interest in ramjet propulsion systems with higher performance requirements and tighter constraints on system size and weight has lead to the need for improved techniques for analyzing and designing such systems. A computer program has been developed to analyze the turbulent reacting flow field in a ramjet dump combustor configuration. The program solves the axisymmetric Navier-Stokes and species equations throughout the engine diffuser and combustor providing a unified analysis of the complete engine flow field, including flow separation, fuel-air mixing, and preliminary results with chemical reaction. Details of the program development are given, along with a comparison of program results with data from a dump combustor simulation experiment, to allow assessment of the flow field modeling that is employed.

Drummond, J. P.↗
NASA NTRS2004

Volatility of Common Protective Oxides in High-Temperature Water Vapor: Current Understanding and Unanswered Questions

Many structural materials rely on the formation of chromia, silica or alumina as a protective layer when exposed in high temperature oxidizing environments. The presence of these oxide layers provides a protective diffusion barrier which slows down further oxidation. In atmospheres containing water vapor, however, reactions to form volatile hydroxide species occur which remove the surface oxide, thus, lowering the protective capability of the oxide scale. This paper summarizes the current understanding of volatility of chromia, silica and alumina in water vapor containing combustion environments. In addition unanswered questions in each system are discussed. Th current paper represents an update on the considerable information learned in the past five years for these systems.

Opila, Elizabeth J.↗
DOE OSTI2023

Mercury methylation potential and bioavailability in the sediments of two distinct aquatic systems

Here, this study explored mercury (Hg) methylation potential in two distinct aquatic systems. Fourmile Creek (FMC) was historically polluted with Hg effluents from groundwater as it is a typical gaining stream, where organic matter and microorganisms in streambed are continuously winnowed. The H02 constructed wetland only receives atmospheric Hg and is rich in organic matter and microorganisms. Both systems receive Hg from atmospheric deposition now. Surface sediments were collected from FMC and H02, spiked with inorganic Hg, and cultivated in an anaerobic chamber to stimulate microbial Hg methylation reactions. Total mercury (THg) and methylmercury (MeHg) concentrations were measured at each spiking stage. Mercury methylation potential (MMP, %MeHg in THg) and Hg bioavailability were assessed with the deployment of diffusive gradients in thin films (DGTs). During the methylation process and at the same incubation stage, FMC sediment showed faster increasing rates of %MeHg and higher MeHg concentrations than H02, demonstrating a stronger MMP in the FMC sediment. Similarly, higher Hg bioavailability was observed in FMC sediment compared to the H02 as indicated by DGT-Hg concentrations. In conclusion, the H02 wetland with high levels of organic matter and microorganisms presented low MMP. But the Fourmile Creek as a gaining stream and a historical site of Hg pollution showed strong MMP and high Hg bioavailability. A related study on microbial community activities characterized the microorganisms between FMC and H02, which is attributed to be the main reason for their different methylation capabilities. Our study further brought up the considerations on remediated sites from Hg contamination: Hg bioaccumulation and biomagnification can still be elevated and higher than the surrounding environment due to lagged changes in microbial community structures. This study supported the sustainable ecological modifications of legacy Hg contamination and raised the necessity of long-term monitoring actions even after executing a remediation plan.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Lectures on statistical mechanics

Presented here is a transcription of the lecture notes from Professor Allan N. Kaufman’s graduate statistical mechanics course Physics 212A and 212B at the University of California Berkeley from the 1972–1973 academic year. 212A addressed equilibrium statistical mechanics with topics: fundamentals (micro-canonical and sub-canonical ensembles, adiabatic law and action conservation, fluctuations, pressure, and virial theorem), classical fluids and other systems (equation of state, deviations from ideality, virial coefficients and van der Waals potential, canonical ensemble and partition function, quasistatic evolution, grand-canonical ensemble and partition function, chemical potential, simple model of a phase transition, quantum virial expansion, numerical simulation of equations of state, and phase transition), chemical equilibrium (systems with multiple species and chemical reactions, law of mass action, Saha equation, chemical equilibrium including ionization and excited states), and long-range interactions (including Coulomb, dipole, and gravitational interactions, Debye–Hückel theory, and shielding). 212B addressed nonequilibrium statistical mechanics with topics: fundamentals (definitions: realizations, moments, characteristic function, and discrete variables), Brownian motion (Langevin equation, fluctuation–dissipation theorem, spatial diffusion, Boltzmann’s H-theorem), Liouville and Klimontovich equations, Landau equation (derivation, elaboration, and H-theorem, and irreversibility), Markov processes and Fokker–Planck equation (derivations of the Fokker–Planck equation and a master equation), linear response and transport theory (linear Boltzmann equation, linear response theory of Kubo and Mori, relation of entropy production to electrical conductivity, transport relations and coefficients, normal mode solutions of the transport equations, sketch of a generalized Langevin equation method for transport theory), and an introduction to nonequilibrium quantum statistical mechanics.

plasma dynamics↗
NASA NTRS2005

New Species of Fire Discovered: Fingering Flamelets Form a Dynamic Population

Poets and artists have long used fire as a metaphor for life. At the NASA Glenn Research Center, recent experiments in a subcritical Rayleigh number flow channel demonstrated that this analogy holds up surprisingly well when tools developed to characterize a biological population are applied to a class of fire that occurs in near-extinction, weakly convective environments (such as microgravity) or in vertically confined spaces (such as our apparatus). Under these conditions, the flame breaks into numerous 'flamelets" that form a Turing-type reaction-diffusion fingering pattern as they spread across the fuel. It is standard practice on U.S. spacecraft for the astronaut crew to turn off the ventilation to help extinguish a fire, both to eliminate the fresh oxygen supply and to reduce the distribution of the smoke. When crew members think that the fire is fully extinguished, they reactivate the ventilation system to clear the smoke. However, some flamelets can survive, and our experiments have demonstrated that flamelets quickly grow into a large fire when ventilation increases.

Olson, Sandra L.↗
NASA NTRS2000

Photochemical Modeling of CH3 Abundances in the Outer Solar System

Recent measurements of methyl radicals (CH3) in the upper atmospheres of Saturn and Neptune by the Infrared Space Observatory (ISO) provide new constraints to photochemical models of hydrocarbon chemistry in the outer solar system. The derived column abundances of CH3 on Saturn above 10 mbar and Neptune above the 0.2 mbar pressure level are (2.5 - 6.0) x 10(exp 13) / sq cm and (0.7 - 2.8) x 10(exp 13) / sq cm, respectively. We use the updated Caltech/Jet Propulsion Laboratory photochemical model, which incorporates hydrocarbon photochemistry, vertical molecular and bulk atmospheric eddy diffusion, and realistic radiative transfer modeling, to study the CH3 abundances in the upper atmosphere of the giant planets and Titan. We identify the key reactions that control the concentrations of CH3 in the model, such as the three-body recombination reaction, CH3 + CH3 + M yields C2H6 + M. We evaluate and extrapolate the three-body rate constant of this reaction to the low-temperature limit (1.8 x 10(exp -16) T(sup -3.75) e(sup -300/T), T < 300 K) and compare methyl radical abundances in five atmospheres: Jupiter, Saturn, Uranus, Neptune, and Titan. The sensitivity of our models to the rate coefficients for the reactions H + CH3 + M yields CH4 + M, H + C2H3 yields C2H2 + H2, (sup 1)CH2 + H2 yields CH3 + H, and H + C2H5 yields 2CH3, the branching ratios of CH4 photolysis, vertical mixing in the five atmospheres, and Lyman alpha photon enhancement at the orbit of Neptune have all been tested. The results of our model CH3 abundances for both Saturn (5.1 x 10(exp 13) / sq cm) and Neptune (2.2 x 10(exp 13) / sq cm) show good agreement with ISO Short Wavelength Spectrometer measurements. Using the same chemical reaction set, our calculations also successfully generate vertical profiles of stable hydrocarbons consistent with Voyager and ground-based measurements in these outer solar system atmospheres. Predictions of CH3 column concentrations (for p <= 0.2 mbar) in the atmospheres of Jupiter (3.3 x 10(exp 13) /sq cm), Uranus (2.5 x 10(exp 12) / sq cm), and Titan (1.9 x 10(exp 15) / sq cm) may be checked by future observations.

Lee, Anthony Y. T.↗