Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reduced Order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A reduced order observer based controller design for H-infinity optimization

In this paper the H-infinity control problem is investigated. It is well-known that for this problem, in general, controllers of the same dynamic order as the given system are needed. However, in the case that the standard assumptions on two direct feedthrough matrices are not satisfied, it is here shown that dynamic compensators of a lower dynamical order can be found. This result can be derived by using the standard reduced order observer based controllers in the case that one or more states are measured without noise.

Stoorvogel, Anton A.↗

Reduced Order Modeling for Transonic Aeroservoelastic Control Law Development

As aircraft become more flexible, aeroelastic considerations become increasingly important and complex, particularly for transonic flight where nonlinearities in the flow render linear analysis tools less effective. In order to analyze these aeroelastic interactions between the fluid and the structure efficiently, reduced order models (ROMs) are sometimes generated from and used in place of computational fluid dynamics solutions. In this paper, several aerodynamic ROMs are generated and coupled with structural models to form aeroelastic ROMs. The aerodynamic ROMs generated here include the effects of control surface motion. Hence, the aeroelastic ROMs presented here are appropriate for use in aeroservoelastic applications and are intended to be used for aeroservoelastic control law development. These ROMs are used to simulate a number of test cases with and without control surface involvement. Results show that several of the ROMs generated in the paper are able to predict results similar to solutions of higher-order computational methods.

Waite, Josiah M.↗

Propagating uncertainties in large-scale hemodynamics models via network uncertainty quantification and reduced-order modeling

Numerical simulations of the cardiovascular system are affected by uncertainties arising from a substantial lack of data related to the boundary conditions and the physical parameters of the mathematical models. Quantifying the impact of this uncertainty on the numerical results along the circulatory network is challenged by the complexity of both the morphology of the domain and the local dynamics. Here, we propose to integrate (i) the Transverse Enriched Pipe Element Methods (TEPEM) as a reduced-order model for effectively computing the 3D local hemodynamics; and (ii) a combination of uncertainty quantification via Polynomial Chaos Expansion and classical relaxation methods – called network uncertainty quantification (NetUQ) – for effectively propagating random variables that encode uncertainties throughout the networks. The findings demonstrate the computational effectiveness of computing the propagation of uncertainties in networks with nontrivial topology, including portions of the cerebral and the coronary systems.

97 MATHEMATICS AND COMPUTING↗

Generation II Reduced Order Models for Groundwater Impacts due to CO 2 and Brine leakage

This report describes the development of reduced-order models (ROMs) describing time-evolution of shallow groundwater impacts due to CO 2 leaks. These ROMs were designed to be subcomponents of a systems-level model being developed by the National Risk Assessment Project. Our work is meant to represent a particular class of groundwater systems: unconfined carbonate aquifers. While actual response of a particular aquifer to a CO 2 leak would be affected by complex hydrogeologic and geochemical processes, the analyses presented in this report considered complex hydrogeology but only simple geochemistry. Complimentary studies were performed at PNNL, emphasizing complex geochemistry and relatively simple (2-D) hydrogeology. Separation of these tasks was necessary due to the computational burden of simulating all the necessary processes in a single model. Similar studies are being performed at LBNL and LLNL to represent a class of confined, sandstone aquifers.

54 ENVIRONMENTAL SCIENCES↗

Development of Unsteady Aerodynamic and Aeroelastic Reduced-Order Models Using the FUN3D Code

Recent significant improvements to the development of CFD-based unsteady aerodynamic reduced-order models (ROMs) are implemented into the FUN3D unstructured flow solver. These improvements include the simultaneous excitation of the structural modes of the CFD-based unsteady aerodynamic system via a single CFD solution, minimization of the error between the full CFD and the ROM unsteady aero- dynamic solution, and computation of a root locus plot of the aeroelastic ROM. Results are presented for a viscous version of the two-dimensional Benchmark Active Controls Technology (BACT) model and an inviscid version of the AGARD 445.6 aeroelastic wing using the FUN3D code.

Silva, Walter A.↗

Non-autoregressive time-series methods for stable parametric reduced-order models

Advection-dominated dynamical systems, characterized by partial differential equations, are found in applications ranging from weather forecasting to engineering design where accuracy and robustness are crucial. There has been significant interest in the use of techniques borrowed from machine learning to reduce the computational expense and/or improve the accuracy of predictions for these systems. These rely on the identification of a basis that reduces the dimensionality of the problem and the subsequent use of time series and sequential learning methods to forecast the evolution of the reduced state. Often, however, machine-learned predictions after reduced-basis projection are plagued by issues of stability stemming from incomplete capture of multiscale processes as well as due to error growth for long forecast durations. To address these issues, we have developed a non-autoregressive time series approach for predicting linear reduced-basis time histories of forward models. In particular, we demonstrate that non-autoregressive counterparts of sequential learning methods such as long short-term memory (LSTM) considerably improve the stability of machine-learned reduced-order models. Further, we evaluate our approach on the inviscid shallow water equations and show that a non-autoregressive variant of the standard LSTM approach that is bidirectional in the principal component directions obtains the best accuracy for recreating the nonlinear dynamics of partial observations. Moreover-and critical for many applications of these surrogates-inference times are reduced by three orders of magnitude using our approach, compared with both the equation-based Galerkin projection method and the standard LSTM approach.

97 MATHEMATICS AND COMPUTING↗

Generating An Advanced Cross-section Library For HTGR Pebble Bed Depletion Calculations Using Reduced-Order Model Generation Techniques

For code development, Advanced Reactor Technologies - Gas Cooled Reactors Program (ART-GCR) rely on a collaboration with the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, but the cross sections generation and the methodology definition is part of this program area goals. Based on previous studies in FY23, the size of microscopic cross section libraries increases rapidly with the number of tabulations, requiring significant amount of memory and drastically slowing down the Griffin calculations when evaluating cross sections via the multivariate linear interpolation approach. Rising to these challenges, this work investigates constructing Reduced-order Models (ROMs) for the multi-group microscopic cross sections to accelerate the cross section evaluation in Griffin. A database of multigroup cross sections is first collected considering all possible parameters that a designer could change for optimization. Down-selection of the ROM techniques afterward shows Deep Neural Network (DNN) as the best candidate when jointly consider memory efficiency, predictive accuracy, computational cost, scalability, flexibility and ease of implementation of the algorithms in comparison to the multidimensional interpolation. This work develops a specific interface that enables the cross section predictions using pre-trained DNN models into Griffin leveraging the existing ROM capabilities. DNNs have been trained for all isotopes for use in Griffin. Preliminary Griffin testing shows that DNNs exhibit exceptional predictive accuracy and the use of DNNs provides orders of magnitude improvement in memory efficiency compared to conventional interpolation techniques. With such ROM techniques, it holds great promise to further increase the fidelity of the Pebble Bed Reactor (PBR) simulation by increasing the number of tabulations/state variables during cross section evaluation, while maintaining the computational cost affordable in Griffin.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Parameterized reduced-order models using hyper-dual numbers.

The goal of most computational simulations is to accurately predict the behavior of a real, physical system. Accurate predictions often require very computationally expensive analyses and so reduced order models (ROMs) are commonly used. ROMs aim to reduce the computational cost of the simulations while still providing accurate results by including all of the salient physics of the real system in the ROM. However, real, physical systems often deviate from the idealized models used in simulations due to variations in manufacturing or other factors. One approach to this issue is to create a parameterized model in order to characterize the effect of perturbations from the nominal model on the behavior of the system. This report presents a methodology for developing parameterized ROMs, which is based on Craig-Bampton component mode synthesis and the use of hyper-dual numbers to calculate the derivatives necessary for the parameterization.

Fike, Jeffrey A.↗

A Data-Driven Reduced Order Model of an Isolated Rotor

There are numerous conceptual design stage rotorcraft analysis tasks which demand a high-fidelity and low cost method for rotor load distribution predictions. Considering Urban Air Mobility (UAM) vehicles aim to operate in close proximity to buildings and with unique rotor configurations, there is a significant challenge in quickly and accurately modeling rotors operating in complex, turbulent flow fields. One potential path for deriving a high-fidelity, low cost rotor model is with data-driven surrogate modeling. In this study, an initial investigation is taken to apply a proper orthogonal decomposition (POD) based reduced order model (ROM) for the purpose of pressure distribution prediction. In this study, a POD ROM was derived to produce distributed pressure predictions on rotor blades subjected to topology change due to variation in twist and taper ratio. Rotor twist was varied between 0◦, 10◦, 20◦, and 30◦ while taper ratio was varied between 1.0, 0.9, 0.8, and 0.7. All rotors consisted of a single blade. The POD ROM was validated for three demonstration cases; a high thrust rotor in hover, a low thrust rotor in hover, and a rotor in forward flight with a flight speed of M = 0.1. Results showed highly accurate distributed load predictions could be achieved at minimal computational cost. Computational cost for hovering blade surface pressure modeling was reduced from 12 hours on 440 cores to 10−5 seconds on a single core. For blade in forward flight cost was reduced from 20 hours on 440 cores to 0.6 seconds on a single core. For cases of high thrust and low thrust rotors, POD ROM was used to undergo a design optimization of the rotor such that figure of merit was maximized. Total optimization time for each case was 1 minute.

Data-Driven↗

Reduced-Order Models of Static Power Grids based on Spectral Clustering

For large-scale interconnected power systems that cover large geographical areas, certain electrical studies are required so that appropriate decisions ensure system reliability and low cost. For such studies, it is often neither practical nor necessary to model in detail the entire power system, which is increasingly complex due to a more diverse range of grid assets to choose from in both short and long-term planning. The goal of this paper is to present a methodology to reduce the order of large-scale power networks based on spectral graph theory given that current methods for static network reduction are not scalable. A brief analysis of some spectral clustering properties to determine which graph Laplacian matrix should be used and why is included. The analysis shows that the utilization of the normalized graph Laplacian is more advantageous for clustering purposes. Techniques are proposed to approximate cost functions for the aggregated generators. This is done via linear regression. The reduced-order model obtained with the proposed methodology has an accuracy above 94% and solves the scalability issue commonly present in other reduction methods. If the utilization of the reduced-order model is either constrained to load levels above mid-peak demand, or cost functions of aggregated units are approximated via a piecewise quadratic approach, then the error distribution is in the order of 10^-3. .

Baquedano-Aguilar, Mario D.↗

Bayesian discovery of optimal reduced order models from mechanistic and experimental data: A case study of Pd penetration in TRISO fuels using BISON

TRistructural ISOtropic (TRISO) particles rely on a silicon carbide (SiC) layer as the primary structural material and barrier to metallic fission products (FPs) release. Accurate prediction of palladium (Pd) transport and penetration is therefore critical for qualifying TRISO fuels for advanced reactors. The empirical correlation for Pd penetration in BISON is derived from historical particle-fuel data, but cannot explain the large scatter in the experimental data that arises from varying experimental conditions. To aid fuel qualification, we previously developed a mechanistic reduced order model (ROM) using BISON that resolves these dependencies. Here, in this work we build on that mechanistic ROM and perform validation and quantify its uncertainty using Bayesian uncertainty quantification (UQ). calibration against a suite of in-pile and out-of-pile experiments spanning particle compositions, geometries, and operating conditions, and we benchmark it against the empirical correlation. Bayesian UQ identifies influential parameters, calibrates them to data, and yields predictive intervals. Results show that while the empirical correlation can be tuned to fit a single experiment type, it transfers poorly; the mechanistic ROM sustains accuracy with credible uncertainty across disparate conditions. This demonstrates a practical path—via Bayesian UQ applied to mechanistic ROMs—to leverage single-effect experiments for inferring in-reactor behavior and supporting TRISO fuel qualification.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Reduced order models for prediction of groundwater quality impacts from CO₂ and brine leakage

A careful assessment of the risk associated with geologic CO₂ storage is critical to the deployment of large-scale storage projects. A potential risk is the deterioration of groundwater quality caused by the leakage of CO₂ and brine leakage from deep subsurface reservoirs. In probabilistic risk assessment studies, numerical modeling is the primary tool employed to assess risk. However, the application of traditional numerical models to fully evaluate the impact of CO₂ leakage on groundwater can be computationally complex, demanding large processing times and resources, and involving large uncertainties. As an alternative, reduced order models (ROMs) can be used as highly efficient surrogates for the complex process-based numerical models. In this study, we represent the complex hydrogeological and geochemical conditions in a heterogeneous aquifer and subsequent risk by developing and using two separate ROMs. The first ROM is derived from a model that accounts for the heterogeneous flow and transport conditions in the presence of complex leakage functions for CO₂ and brine. The second ROM is obtained from models that feature similar, but simplified flow and transport conditions, and allow for a more complex representation of all relevant geochemical reactions. To quantify possible impacts to groundwater aquifers, the basic risk metric is taken as the aquifer volume in which the water quality of the aquifer may be affected by an underlying CO₂ storage project. The integration of the two ROMs provides an estimate of the impacted aquifer volume taking into account uncertainties in flow, transport and chemical conditions. These two ROMs can be linked in a comprehensive system level model for quantitative risk assessment of the deep storage reservoir, wellbore leakage, and shallow aquifer impacts to assess the collective risk of CO₂ storage projects.

54 ENVIRONMENTAL SCIENCES↗

Predicting laser weld reliability with stochastic reduced-order models. Predicting laser weld reliability

Laser welds are prevalent in complex engineering systems and they frequently govern failure. The weld process often results in partial penetration of the base metals, leaving sharp crack-like features with a high degree of variability in the geometry and material properties of the welded structure. Furthermore, accurate finite element predictions of the structural reliability of components containing laser welds requires the analysis of a large number of finite element meshes with very fine spatial resolution, where each mesh has different geometry and/or material properties in the welded region to address variability. We found that traditional modeling approaches could not be efficiently employed. Consequently, a method is presented for constructing a surrogate model, based on stochastic reduced-order models, and is proposed to represent the laser welds within the component. Here, the uncertainty in weld microstructure and geometry is captured by calibrating plasticity parameters to experimental observations of necking as, because of the ductility of the welds, necking – and thus peak load – plays the pivotal role in structural failure. The proposed method is exercised for a simplified verification problem and compared with the traditional Monte Carlo simulation with rather remarkable results.

36 MATERIALS SCIENCE↗

Sufficient excitation criteria for reduced-order adaptive observers

Sufficient excitation conditions are derived for three adaptive observation schemes for the case in which the order of the observer is less than that of the plant being observed. The reduced-order excitation requirement, found to be identical for all three observers, is that the input contain more than (n+N-1)/2 frequencies, where n is the observer order, and N is the dimension of the portion of the plant which is both controllable and observable.

Lilly, J. H.↗

Reduced order modeling for flow and transport problems with Barlow Twins self-supervised learning

Abstract We propose a unified data-driven reduced order model (ROM) that bridges the performance gap between linear and nonlinear manifold approaches. Deep learning ROM (DL-ROM) using deep-convolutional autoencoders (DC–AE) has been shown to capture nonlinear solution manifolds but fails to perform adequately when linear subspace approaches such as proper orthogonal decomposition (POD) would be optimal. Besides, most DL-ROM models rely on convolutional layers, which might limit its application to only a structured mesh. The proposed framework in this study relies on the combination of an autoencoder (AE) and Barlow Twins (BT) self-supervised learning, where BT maximizes the information content of the embedding with the latent space through a joint embedding architecture. Through a series of benchmark problems of natural convection in porous media, BT–AE performs better than the previous DL-ROM framework by providing comparable results to POD-based approaches for problems where the solution lies within a linear subspace as well as DL-ROM autoencoder-based techniques where the solution lies on a nonlinear manifold; consequently, bridges the gap between linear and nonlinear reduced manifolds. We illustrate that a proficient construction of the latent space is key to achieving these results, enabling us to map these latent spaces using regression models. The proposed framework achieves a relative error of 2% on average and 12% in the worst-case scenario (i.e., the training data is small, but the parameter space is large.). We also show that our framework provides a speed-up of $$7 \times 10^{6}$$ 7 × 10 6 times, in the best case, and $$7 \times 10^{3}$$ 7 × 10 3 times on average compared to a finite element solver. Furthermore, this BT–AE framework can operate on unstructured meshes, which provides flexibility in its application to standard numerical solvers, on-site measurements, experimental data, or a combination of these sources.

97 MATHEMATICS AND COMPUTING↗

Investigation of rotating mode behavior in BWR out-of-phase limit cycle oscillations – Part 1: Reduced order model

Previous neutronic/thermal-hydraulic (TH) coupled numerical simulations using full-core TRACE/PARCS and SIMULATE-3K BWR models have shown evidence of a specific “rotating mode” behavior (steady rotation of the symmetry line, i.e. constant phase shift of approximately 90° between the first two azimuthal modes) in out-of-phase limit cycle oscillations, regardless of initial conditions and even if the first two azimuthal modes have different natural frequencies. This suggests a nonlinear coupling between these modes; otherwise, the phase shift between these modes would change at a constant rate during the limit cycle. The goal of the present work is to gain further insights on the rotating mode behavior using a simplified mathematical model which contains all of the important physics for this application while providing sufficient flexibility and simplicity to allow for in-depth understanding of the underlying phenomena. This was accomplished using a multi-channel, multi-modal reduced-order model, using a modification of the fixed pressure drop boundary condition to simulate channel coupling via the inlet and outlet plena, in order to destabilize the out-of-phase mode over the in-phase mode. Examination of the time-dependent solution of the nonlinear system showed a clear preference for rotating mode behavior in the four-channel model under stand-alone TH conditions and for conditions with weak neutronic feedback. Furthermore, when neutronic feedback was strengthened (i.e., larger reactivity feedback coefficients), the side-to-side mode (stationary symmetry line) was favored instead. Additional analyses using higher-fidelity numerical modeling, as well as a physical explanation for the rotating behavior seen in both sets of analyses, will be provided in a companion paper (“Part 2”).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The application of the reduced order model Kalman filter to motion estimation of degraded image sequences

Motion estimation is a field of great interest because of its many applications in areas such as robotics and image coding. The optic flow method is one such scheme which, although fairly accurate, is prone to error in the presence of noise. This thesis describes the use of the reduced order model Kalman filter (ROMKF) in reducing errors in displacement estimation due to degradation of the sequence. The implementation of filtering and motion estimation algorithms on the SUN workstation is also discussed. Results from preliminary testing were used to determine the degrees of freedom available for the ROMKF in the SUN software. The tests indicated that increasing the state to the left leads to slight improvement over the minimum state case. Therefore, the software uses the minimum model, with the option of adding states to the left only. The ROMKF was then used in conjunction with a hierarchical pel recursive motion estimation algorithm. Applying the ROMKF to the degraded displacements themselves generally yielded slight improvements in cases with noise degradation and noise plus blur. Filtering the images of the degraded sequence prior to motion estimation was less effective in these cases. Both methods performed badly in the case of blur alone, resulting in increased displacement errors. This is thought to be due in part to filter artifacts. Some improvements were obtained by varying the filter parameters when filtering the displacements directly. This result suggests that further study in varying filter parameters may lead to better results. The results of this thesis indicate that the ROMKF can play a part in reducing motion estimation errors from degraded sequences. However, more work needs to be done before the use of the ROMKF can be a practical solution.

Simpson, Elizabeth C.↗

Reduced Order Models Based on Linear and Nonlinear Aerodynamic Impulse Responses

This paper discusses a method for the identification and application of reduced-order models based on linear and nonlinear aerodynamic impulse responses. The Volterra theory of nonlinear systems and an appropriate kernel identification technique are described. Insight into the nature of kernels is provided by applying the method to the nonlinear Riccati equation in a non-aerodynamic application. The method is then applied to a nonlinear aerodynamic model of an RAE 2822 supercritical airfoil undergoing plunge motions using the CFL3D Navier-Stokes flow solver with the Spalart-Allmaras turbulence model. Results demonstrate the computational efficiency of the technique.

Silva, Walter A.↗