SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Failures and deficiencies in flight programs are reviewed and suggestions are made for avoiding them. The technology development problem areas considered are control configured vehicle design, gyros, solid state star sensors, control instrumentation, tolerant/accomodating control systems, large momentum exchange devices, and autonomous rendezvous and docking.
The Spatial, High-Accuracy, Position-Encoding Sensor is a controls sensor suitable for the determination of the static shape and vibrational motion of large space structures and similar systems and for the determination of position and velocity in rendezvous and docking. It uses a combination of electro-optical techniques to measure the three-dimensional coordinates distributed over the structure at reading rates high compared to the rates at which the coordinates are changing. The technical approach is that of measuring the distance to and the direction of points on the structure from a single sensor head. Many points can be measured simultaneously from a single head without significantly increasing the complexity of the system.
Rendezvous and docking (R&D) sensors needed to support Earth orbital operations of vehicles were investigated to determine the form they should take. An R&D sensor must enable an interceptor vehicle to determine both the relative position and the relative attitude of a target vehicle. Relative position determination is fairly straightforward and places few constraints on the sensor. Relative attitude determination, however, is more difficult. The attitude is calculated based on relative position measurements of several reflectors placed in a known arrangement on the target vehicle. The constraints imposed on the sensor by the attitude determination method are severe. Narrow beamwidth, wide field of view (fov), high range accuracy, and fast random scan capability are all required to determine attitude by this method. A consideration of these constraints as well as others imposed by expected operating conditions and the available technology led to the conclusion that the sensor should be a cw optical radar employing a semiconductor laser transmitter and an image dissector receiver.
The feasibility of using a polarized-interferometer system as a rendezvous and docking sensor for two cooperating spacecraft was studied. The polarized interferometer is a radio frequency system for long range, real time determination of relative position and attitude. Range is determined by round trip signal timing. Direction is determined by radio interferometry. Relative roll is determined from signal polarization. Each spacecraft is equipped with a transponder and an antenna array. The antenna arrays consist of four crossed dipoles that can transmit or receive either circularly or linearly polarized signals. The active spacecraft is equipped with a sophisticated transponder and makes all measurements. The transponder on the passive spacecraft is a relatively simple repeater. An initialization algorithm is developed to estimate position and attitude without any a priori information. A tracking algorithm based upon minimum variance linear estimators is also developed. Techniques to simplify the transponder on the passive spacecraft are investigated and a suitable configuration is determined. A multiple carrier CW signal format is selected. The dependence of range accuracy and ambiguity resolution error probability are derived and used to design a candidate system. The validity of the design and the feasibility of the polarized interferometer concept are verified by simulation.
A method and apparatus for transportation between orbits are presented. A tanker orbit transfer vehicle includes two stages each of which includes a fuel container. The first stage may be left in an intermediate parking orbit while the second stage goes on to carry out a mission, thereafter to return to rendezvous and dock with the first stage. Fuel carried by the first stage may be utilized for travel of the two stages between the starting orbit and the parking orbit, and for return to the starting orbit. An aerobrake may be included in the system for use in the return to the initial orbit.
Science objectives for a Mars exploration program in the 1990s, set forth by NASA's Committee on Planetary Exploration, are presented. They include: an intensive study of the Martian surface, the exploration of the structure and general circulation of the atmosphere, the exploration of the nature and dynamics of the planet's interior, the nature of Mars's magnetic field, the character of the upper atmosphere and its interaction with the solar wind, and the establishment of the global chemical and physical characteristics of the Martian surface. Several low cost missions, which have been suggested by the Committee for NASA's CORE program, such as the Mars Geoscience Climatology Observer, the Mars Aeronomy Orbiter, and the Mars Surface Network and Surface Probing missions are also covered. Direct Entry-Direct Return and Out-of-Orbit Entry-Orbital Rendezvous and Docking are two versions of a Mars Rover and Sample Return (MRSR) mission discussed in detail. It is concluded that a MRSR mission will require the combination of full Centaur capability, aerocapture at Mars and earth, and direct return to earth to meet major scientific goals. Further studies should be made in orbit assembly, fuel transfer technology, aeromaneuvering, terminal guidance, rover technology, and robotics.
Various design areas of concern in navigation and control of space-based orbital maneuvering systems such as those on the Orbiter are discussed, with note taken of approach maneuvers. Design problems occur in the areas of storage modes, sensing, activation methods, navigation, target/mission determination, rendezvous and docking schemes, reliability, and commonality between low- and high-energy maneuvering vehicles. Navigation may be in autonomous or nonautonomous modes and may include ground-baed computations and commands via the TDRSS or NORAD systems. Autonomous operations would interface with the GPS. All the concepts discussed are significant for the planned orbital transfer and orbital maneuvering vehicles, which would be used to place satellites in orbit and repair or retrieve them.
A problem in the automatic assembly of space stations is the determination of guidance laws for the terminal rendezvous and docking of two structural components or modules. The problem involves the feedback control of both the relative attitude and translational motion of the modules. A suitable mathematical model based on rigid body dynamics was used. The basic requirements, physical constraints and difficulties associated with the control problem are discussed. An approach which bypasses some of the difficulties is proposed. A nonlinear guidance law satisfying the basic requirements is derived. The implementation requirements is discussed. The performance of the resulting feedback control system with rigid and flexible structural components is studied by computer simulation.
The development of the Advanced Computer Graphics Laboratory at NASA/JSC will enable NASA engineers to utilize state-of-the-art computer systems to simulate and analyze current and planned space missions. These systems utilize computer graphics to animate automated satellite rendezvous and docking, satellite servicing, tether operations, as well as remote manipulator activities and assembly of large space structures including the space station. These computer simulations enhance the engineering evaluation of possible hazardous scenarios in space by allowing users to view from any point in space these activities and determine if any potential problem could occur.
This paper examines the Space Station configuration, requirements, and operations, and considers its adaptability to accommodate each tether application. These include power and thrust generation, rendezvous and docking, science platforms, variable gravity, and satellite boost and deboost. It attempts to uncover incompatibilities, and suggests compromises which would be required to effectively utilize each specific application. The goal is to enhance the overall understanding of the adaptability of the Space Station to tether applications.
Recent advancements in the areas of tracking, communications, and robotics vision sensors being pursued within NASA, as applicable to space programs, are presented. Optical and laser-based communications and tracking systems and applications to space programs are discussed. Communication systems for multiple access, broadband, high data rate, and efficient operations are given. Current efforts at 20/30 GHz and millimeter wave bands are summarized. The use of optical data processing in control system applications for rendezvous and docking is presented. Robotics vision, based on television, laser, and microwave sensors for space applications, is discussed. The fusion of these technologies for remote control, station keeping, tracking, inspection, and satellite repair is detailed.
A testbed has been developed for the study of sensor systems to be used in telerobotic operations. The program, conducted in conjunction with Johnson Space Center of NASA, addresses the navigational problems associated with target acquisition and rendezvous for teleoperated robotic work stations. The program will utilize a mobile platform which will support various sensor systems during their development and testing in an earth-based environment. The testbed has been developed in support of a program to develop sensor systems that will aid in rendezvous and docking operations to be conducted as a part of the space station program. A mobile platform has been used to permit testing of these components in a conventional laboratory environment with consequent savings in cost and complexity. The sensor systems, while representative of devices currently in use for robotic applications, are not considered prototypical of the ones that will be used in the final applications. The test program provided information that will support the design of system augmentations and will lead to a comprehensive test program for sensor development.
Ascent, rendezvous and earth return are three operational mission sequences in the sample return phase of the Mars Rover Sample Return (MRSR) mission. In the conduct of the current study, several vehicles have been identified to enable the sample return phase of the mission. These elements are the Mars Ascent Vehicle (MAV), the Earth Return Vehicle (ERV), the rendezvous and docking module (RDM), and the sample return capsule (SRC). The sample return elements, when combined with other elements performing the launch and delivery functions, form the basis of the MRSR system. This paper summarizes the significant mission aspects of the sample return phase, describes the Mars ascent and earth return scenario, illustrates the conceptual designs developed for the MAV, ERV, RDM, and SRC, and discusses the results of significant trade studies conducted.
Technological advancements in tracking, communications, and robotic vision sensors are reviewed. The development of communications systems for multiple access, broadband, high data rate, and efficient operation is discussed. Consideration is given to the Tracking and Data Relay Satellite systems, GPS, and communications and tracking systems for the Space Shuttle and the Space Station. The use of television, laser, and microwave sensors for robotics and technology for autonomous rendezvous and docking operations are examined.
The research and development of technologies necessary for the Mars Rover Sample Return (MRSR) mission are examined. Consideration is given to the use of aerobraking, autonomous rendezvous and docking, and an autonomous Mars lander. The development of a Mars Rover and the required sample acquisition, analysis and preservations capabilities of the Rover are discussed.
An overview of the critical technology needs and the Space Station Freedom (SSF) focused support requirements for the Office of Exploration's (OEXP) manned lunar and Mars missions is presented. Major emphasis is directed at the technology needs associated with the low earth orbit (LEO) transportation node assembly and vehicle processing functions required by the lunar and Mars mission flight elements. The key technology areas identified as crucial to support the LEO node function include in-space assembly and construction, in-space vehicle processing and refurbishment, space storable cryogenics, and autonomous rendezvous and docking.
NASA's Johnson Space Center in Houston, Texas, is active in several aspects of hybrid image processing. (The term hybrid image processing refers to a system that combines digital and photonic processing). The major thrusts are autonomous space operations such as planetary landing, servicing, and rendezvous and docking. By processing images in non-Cartesian geometries to achieve shift invariance to canonical distortions, researchers use certain aspects of the human visual system for machine vision. That technology flow is bidirectional; researchers are investigating the possible utility of video-rate coordinate transformations for human low-vision patients. Man-in-the-loop teleoperations are also supported by the use of video-rate image-coordinate transformations, as researchers plan to use bandwidth compression tailored to the varying spatial acuity of the human operator. Technological elements being developed in the program include upgraded spatial light modulators, real-time coordinate transformations in video imagery, synthetic filters that robustly allow estimation of object pose parameters, convolutionally blurred filters that have continuously selectable invariance to such image changes as magnification and rotation, and optimization of optical correlation done with spatial light modulators that have limited range and couple both phase and amplitude in their response.
A program to develop the capability of servicing satellites in remote locations, where a series of flight that will demonstrate autonomous rendezvous and docking, supervised autonomous Orbital Replacement Unit (ORU) exchange, supervised autonomous fluid transfer and, proximity operations for Space Station Freedom were planned, is described. The flight demonstrations are the results of several mission scenarios with complex technical objectives. Three Shuttle flights are planned to complete the multi-objective program. The major hardware elements of the program are described and discussed. Demonstration objectives and technical approaches to the flight demonstrations are discussed. Existing and developing technologies are assessed for applicability to the Satellite Servicer System (SSSFD) program.