Search NASA⌕ Search

SEARCH · Search NASA

Results for “Saturation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Trap Passivation for Reducing On-Resistance and Saturation Voltage in Wafer-Bonded InGaAs-Channel/GaN-Drain Vertical FETs

High frequency and high power are the driving forces behind semiconductor transistor technology. However, conventional devices have the tradeoff of either being high speed or high breakdown—but not both. Wafer-bonded current aperture vertical electron transistors (BAVETs) help eliminate the tradeoff by combining a high-speed III-As channel to a high-breakdown III-N drift region. The device presented herein comprises of an InAlAs gate-barrier/InGaAs channel, wafer-bonded to an InGaN/GaN drift region, with the InGaAs/InGaN interface referred to as the wafer-bonded interface (WBI). The electronic behavior of WBIs is yet less known but necessary in realizing the potential of a BAVET. Herein, strong trap activity at the WBI is shown to be the cause of abnormally high saturation voltage ( V DS_SAT ) in BAVETs. The traps cause unintentional space charge (SC) region in the drain region of the device. This causes a drain resistance, a higher ON-resistance ( R ON ), and a higher V DS_SAT . Here, the challenge is overcome by hydrogen passivation of traps at WBI by using a p-doping for the InAlAs layer, which reduces the trap-charge concentration at the WBI. Consequently, the width of the SC region is reduced and a reduction in V DS_SAT is demonstrated, wherein it reduces from >12 to 5 V.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Implementation of a Doppler-Free Saturation Spectroscopy (DFSS) Diagnostic for Helicon Wave Electric Field Vector Measurement in Edge Plasma in DIII-D

A laser-based technique known as Doppler-free saturation spectroscopy (DFSS) has been designed, fabricated, and installed on the DIII-D National Fusion Facility to measure the helicon wave electric field vector in the edge plasma. These experimental measurements quantify phenomena resulting in decreased current drive efficiency due to wave/edge plasma interactions. This implementation of DFSS on DIII-D is the first of its kind on a tokamak and thus presents unique engineering challenges, including integration of the system onto an existing multidiagnostic port flange without impacts to system serviceability, as well as maintaining precise laser alignment over a 2-m distance during disruptions and thermal drift of the vessel. Further, these challenges were resolved using innovative design approaches such as a novel decoupled shutter system to facilitate serviceability of the in-vessel mirror assemblies without the need for personnel vessel entry, as well as an ex-vessel piezo-mirror-based optical system for laser beam shaping and real-time steering of the measurement location. The solutions to these engineering challenges were demonstrated during the successful installation and operation of these diagnostic components during the 2022 DIII-D vent and subsequent experimental campaign.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Saturation Carrying Capacity for Group A Particles in a Circulating Fluidized Bed

Empirical models continue to play a significant role in the design process of multiphase chemical reactors, particularly riser reactors in circulating fluidized bed (CFB) processes. It is imperative that accurate, industrial relevant correlations are developed to aid these design efforts. Using poor correlations could result in startup issues and significant redesign work. In this work, a new correlation is proposed to predict the saturation carrying capacity of Geldart Group A particles. This new correlation improves upon the currently available correlations for these materials and covers a broad range of Geldart Group A particles (particle diameters from 52 to 70 µm, and Archimedes numbers ranging from 5 to 20), superficial gas velocities (1 to 4 m/s), and riser diameters (0.066 to 0.3048 m). The new correlation has an Absolute Average Percent Deviation of only 17.6%, making it the most accurate correlation for Geldart Group A particles in the current literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1961

THE DENSITIES OF SATURATED LIQUID HYDROGEN

This laboratory is engaged in a programme for the determination of thermostatic, thermodynamic, and transport properties of para-hydrogen, emphasizing high densities. Reported here are new data for the density of saturated liquid pura-hydrogen from boiling point to critical point. A review of hydrogen properties includes densities of normal hydrogen from triple to critical points and of pura-hydrogen up to the boiling point? More recent determinations of vapour pressures and critical constants have been made for both hydrogen modification.

LIQUID HYDROGEN↗
NASA NTRS1966

Propellant saturation test, 2 February - 3 May 1966

The objective of this test program was to determine the behavior of gas-saturated water and nitrogen tetroxide under various flow and pressure drop conditions. A second part of the test program is to be conducted at a later time to determine the rate of gas diffusion into propellants. The test program was conducted by the Fluid Systems Test Section of the Thermochemical Test Branch for the Auxiliary Propulsion and Pyrotechnics Branch, Propulsion and Power Division. Testing was accomplished at the Fluid Systems Test Facility during the period from February 2, 1966, to May 3, 1966.

Nitrogen compound↗
NASA NTRS1996

Improved Saturation Performance in High Speed Waveguide Photodetectors at 1.3 ??sing an Asymmetric InA1GaAs/InGaAsP Structure

Waveguide photodetector (WGPD) results have recently been presented demonstrating the very large bandwidth-efficiency product potential of these devices. Improved saturation and linearity characteristics are realized in waveguide p-i-n photodetectors at 1.3 ??y using an asymmetric cladding structure with InA1GaAs/InGaAsP in the anode and InGaAsP in the cathode.

multi-mode structures photocurrent saturation wave↗
DOE OSTI2025

Surface Protected Organozirconium Catalyzes C─H Alumination of Saturated Hydrocarbons

Surface grafted organozirconium catalyzes C─H/Et─Al exchange reactions, involving saturated hydrocarbons and AlEt 3 , to afford organoaluminum compounds and ethane. The Zr(O t Bu) 3 @SiO 2 -Al 2 O 3 –700 (1) catalyst contains monopodal ≡SiO─Zr(O t Bu) 3 and only a few residual silanols (<5%). Nonetheless, these silanols are the Achille's heel of 1, providing a pathway for surface and catalyst degradation during catalysis, limiting the alkylaluminum yield and catalyst turnover. Support degradation, involving the cleavage of Si─O bonds by activated surface organometallics, is inhibited by capping silanols with ─SiMe 3 . Residual silanols in 1 react with allyltrimethylsilane, as determined by solid-state 13 C and 29 Si nuclear magnetic resonance (NMR) spectroscopy, infrared (IR) spectroscopy, and reaction stoichiometry, to form Zr(O t Bu) 3 /SiMe 3 @SiO 2 -Al 2 O 3–700 (2), which is resistant to degradation by AlEt 3 . C─H alumination of dodecane catalyzed by 2 produces higher yields of the 1-dodecylaluminum product in comparison to 1, and in >95% selectivity. Additionally, methane undergoes 2-catalyzed C─H alumination, providing a route to AlMe 3 .

Banerjee, Sayak [Iowa State Univ., Ames, IA (Unite↗
DOE OSTI2023

Anomalous Loss Reduction Below Two‐Level System Saturation in Aluminum Superconducting Resonators

Superconducting resonators are widely used in many applications such as qubit readout for quantum computing, and kinetic inductance detectors. These resonators are susceptible to numerous loss and noise mechanisms, especially the dissipation due to two-level systems (TLS) which become the dominant source of loss in the few-photon and low temperature regime. In this study, capacitively-coupled aluminum half-wavelength coplanar waveguide resonators are investigated. Surprisingly, the loss of the resonators is observed to decrease with a lowering temperature at low excitation powers and temperatures below the TLS saturation. This behavior is attributed to the reduction of the TLS resonant response bandwidth with decreasing temperature and power to below the detuning between the TLS and the resonant photon frequency in a discrete ensemble of TLS. When response bandwidths of TLS are smaller than their detunings from the resonance, the resonant response and thus the loss is reduced. At higher excitation powers, the loss follows a logarithmic power dependence, consistent with predictions from the generalized tunneling model (GTM). A model combining the discrete TLS ensemble with the GTM is proposed and matches the temperature and power dependence of the measured internal loss of the resonator with reasonable parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Universality in asymptotic bounds and its saturation in 2D CFT

We study asymptotics of three point coefficients (light-light-heavy) and two point correlators in heavy states in unitary, compact 2D CFTs. We prove an upper and lower bound on such quantities using numerically assisted Tauberian techniques. We obtain an optimal upper bound on the spectrum of operators appearing with fixed spin from the OPE of two identical scalars. While all the CFTs obey this bound, rational CFTs come close to saturating it. This mimics the scenario of bounds on asymptotic density of states and thereby pronounces an universal feature in asymptotics of 2D CFTs. Next, we clarify the role of smearing in interpreting the asymptotic results pertaining to considerations of eigenstate thermalization in 2D CFTs. In the context of light-light-heavy three point coefficients, we find that the order one number in the bound is sensitive to how close the light operators are from the $\frac{c}{32}$ threshold. In context of two point correlator in heavy state, we find the presence of an enigmatic regime which separates the AdS 3 thermal physics and the BTZ black hole physics. Furthermore, we present some new numerical results on the behaviour of spherical conformal block.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Hygro-thermo-mechanical modeling of partially saturated air-entrained concrete containing dissolved salt and exposed to freeze-thaw cycles

Highlights: • A model for cyclic freezing of air-entrained concrete containing salt is proposed. • The freeze-thaw hysteresis, also including the effect of dissolved salt, is modeled. • The diffusive and convective flux of salt is coupled to the freeze-thaw processes. • The freeze-thaw response of air-entrained concrete containing salt is reproduced. • Liquid absorption from reservoirs increases with an increased concentration of salt. In cold regions, understanding the freeze-thaw behavior of air-entrained concrete is important for designing durable structures and assessing the remaining service life of existing structures. This study presents a hygro-thermo-mechanical multiphase model that describes the cyclic freeze-thaw behavior of partially saturated air-entrained concrete containing dissolved salt. An equilibrium and a non-equilibrium approach are adopted to model the ice formation, including the freeze-thaw hysteresis, inside the porous network. The model also considers the diffusive and convective transport of the dissolved salt coupled to the freeze-thaw processes. Two examples are presented to verify and highlight the capabilities of the model. The first example shows that the model is capable of reproducing the experimentally observed mechanical response of specimens containing NaC1-solutions of different concentrations. In the second example, a larger absorption of liquid from an external reservoir is obtained with an increasing salt concentration in the reservoir, which is consistent with experimental observations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Geochemical reactions and alteration of pore architecture in saturated shale after injection of stimulation fluid

Pore architecture regulates fluid flow between unconventional shale reservoir and hydraulically-induced fractures. Imbibition of stimulation fluid may change this architecture and alter hydrocarbon flow. Hydrothermal experiments were conducted at reservoir conditions (125 °C, 45 MPa) to test two hypotheses: 1) Shale, not stimulation fluid, dominates the geochemistry of an unconventional reservoir containing formation water; and 2) Mineral dissolution and precipitation induced by stimulation fluid is transient and manifests across micro-, meso-, and macro-scales of pore architecture. Experiments replicated a shut-in well in the Cretaceous Baxter Shale, Green River Basin, Wyoming USA. Stimulation fluid was injected into one experiment after formation water (I = 0.35 mol/kg, pH = 6.4) and core reacted for 48 days. This novel approach equilibrated rock and formation water and saturated pores with formation water before introducing stimulation fluid. The second experiment served as a control. Trends of aqueous calcium, silica and aluminum in the injection experiment suggest transient dissolution of calcite and feldspar and/or quartz as well as clay and barite precipitation; mineralogic evidence was limited to calcite dissolution and barite precipitation. The rock maintained reducing conditions (Eh = +0.08 to -0.16 V) despite injection of oxidizing stimulation fluid (Eh = 1.1 V). pH of the stimulation fluid-formation water mixture evolved from 2.3 to pre-injection values (~6) within 24 h. The results indicate that mineral dissolution and precipitation manifest in macropores with barely detectable alteration to micro- and mesopores. Formation water or organic matter in pores may have inhibited access of stimulation fluid to micro- and mesopores

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Simulation of dilatancy-controlled gas migration processes in saturated bentonite using a coupled multiphase flow and elastoplastic H 2 M model

Dilatancy-controlled gas flow in preferential pathways plays a key role in the safety analysis of radioactive waste repositories. This is particularly the case for bentonite, an often-preferred barrier material. Gas flow in preferential pathways is characterized by localization and spontaneous behavior, which is challenging to simulate in numerical models due to strong hydro-mechanical coupling. To analyze a laboratory experiment in the framework of the DECOVALEX-2023 project, this study introduced a new approach of combining continuous modelling methods with spatial material properties derived from material heterogeneities and experimental observations. The proposed model utilized hydro-mechanical spatial distributions, namely Young's modulus and gas entry pressure, and elastoplasticity combined with a linear swelling model. A conceptual strain-dependent permeability approach simulated dilatancy-controlled gas flow based on hydro-mechanical coupling. To test the effectiveness of the presented approach, a gas injection test in a compacted, saturated bentonite sample was simulated using the open-source code OpenGeoSys 5.8 and compared with experimental observations. The presented methodology is capable of simulating localized gas flow in preferential pathways. The spatial distributions of Young's modulus and gas entry pressure affect the swelling pressure, relative permeability and, in combination with the strain-dependent permeability model, also the intrinsic permeability.

42 ENGINEERING↗