Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensitivity Matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Experimental studies of nuclear matrix elements for neutrino-less ββ decays

Nuclear matrix elements M{sup 0ν} for neutrino less double beta decays (0νββ) are crucial for neutrino studies in 0νββ experiments. The neutrino mass to be studied is sensitive to M{sup 0ν}, while theoretical calculations for M{sup 0ν} are hard. Thus experimental studies of nuclear structures and single β matrix elements M{sub β} associated with 0νββ are useful to confirm and help the theoretical calculations. This reports briefly experimental methods and recent charge exchange reaction studies for M{sub β}. The single β elements for M{sup ±}(2{sup −}) associated with M{sup 0ν}(2{sup −}), which is the major component of M{sup 0ν}, are found to be reduced (quenched) much by the spin isospin correlation and the nuclear medium (non-nucleonic isobar) effect. The present result suggests that the spin isospin components of M{sup 0ν} is fairly reduced (quenched)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Thermally driven advection for radioxenon transport from an underground nuclear explosion

Abstract Barometric pumping is a ubiquitous process resulting in migration of gases in the subsurface that has been studied as the primary mechanism for noble gas transport from an underground nuclear explosion (UNE). However, at early times following a UNE, advection driven by explosion residual heat is relevant to noble gas transport. A rigorous measure is needed for demonstrating how, when, and where advection is important. In this paper three physical processes of uncertain magnitude (oscillatory advection, matrix diffusion, and thermally driven advection) are parameterized by using boundary conditions, system properties, and source term strength. Sobol' sensitivity analysis is conducted to evaluate the importance of all physical processes influencing the xenon signals. This study indicates that thermally driven advection plays a more important role in producing xenon signals than oscillatory advection and matrix diffusion at early times following a UNE, and xenon isotopic ratios are observed to have both time and spatial dependence.

Sun, Yunwei↗

Synergistic Alignment of Low Aspect‐Ratio π‐Conjugated Molecules Enables Exceptional UV–vis–NIR Polarization Detection

Abstract Polarization detection enhances signal contrast and is widely utilized in diverse advanced applications. An ongoing challenge is the development of high‐performance polarization‐sensitive photodetectors based on optically anisotropic organic semiconductors, particularly in the near‐infrared (NIR) region. While uniaxially aligned π‐conjugated polymers with high aspect ratios exhibit strong linear dichroism and have shown promise, their limited NIR performance and heavy reliance on polymer material now represent critical limitations. Here, a breakthrough is reported in achieving giant linear dichroism and exceptional polarization detection with low aspect‐ratios (AR) non‐fullerene small‐molecule (NFSM) acceptors, extending polarization sensitivity from the UV–vis to the NIR range. An impressive dichroic ratio of 27.1 at 605 nm and 12.0 at 780 nm is demonstrated. The maximum polarization photocurrent ratio is 11.2 at 780 nm under parallel versus perpendicular polarized light. This unprecedented performance originates from synergistic molecular alignment, wherein NFSMs significantly enhance the uniaxial orientation of both the polymer matrix and the NFSMs themselves during self‐assembly and thermal annealing. Besides, such a linear‐polarization‐sensitive photodetectors (LPS‐PDs) are showcased in generating degree‐of‐linear‐polarization imaging. The work establishes NFSMs as a viable material system for next‐generation of organic LPS‐PDs and provides fundamental insights into structural origins of polarization sensitivity in low AR organic semiconductors.

Xue, Yingying↗

A Trapping-Micro-LC-FAIMS/dCV-MS Strategy for Ultrasensitive and Robust Targeted Quantification of Protein Drugs and Biomarkers

The sensitivity of LC-MS in quantifying target proteins in plasma/tissues is significantly hindered by co-eluted matrix interferences. While antibody-based immuno-enrichment effectively reduces interferences, developing and optimizing antibodies are often time-consuming and costly. Here, in this study, by leveraging the orthogonal separation capability of Field Asymmetric Ion Mobility Spectrometry (FAIMS), we developed a FAIMS/differential-compensation-voltage (FAIMS/dCV) method for antibody-free, robust, and ultra-sensitive quantification of target proteins directly from plasma/tissue digests. By comparing the intensity-CV profiles of the target vs. co-eluted endogenous interferences, the FAIMS/dCV approach identifies the optimal CV for quantification of each target protein, thus maximizing the signal-to-noise ratio (S/N). Compared to quantification without FAIMS, this technique dramatically reduces endogenous interferences, showing a median improvement of the S/N by 14.8-fold for the quantification of 17 representative protein drugs and biomarkers in plasma or tissues and a 5.2-fold median increase in S/N over conventional FAIMS approach, which uses the peak CV of each target. We also discovered that the established CV parameters remain consistent over months and are matrix-independent, affirming the robustness of the developed FAIMS/dCV method and the transferability of the method across matrices. The developed method was successfully demonstrated in three applications: the quantification of monoclonal antibodies with sub-ng/mL LOQ in plasma, an investigation of the time courses of evolocumab and its target PCSK9 in a preclinical setting, and a clinical investigation of low abundance obesity-related biomarkers. This innovative and easy-to-use method has extensive potential in clinical and pharmaceutical research, particularly where sensitive and high-throughput quantification of protein drugs and biomarkers is required.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimation Matrix Calibration of PMU Data-driven State Estimation Using Neural Network

Linear state estimation (LSE) is a phasor measurement unit (PMU) data-based power system state estimation that incorporates a linear measurement model in rectangular coordinates. Due to the high computational efficiency and high observational time-resolution, LSE can act as a supplementary state estimation in a wide-area monitoring system (WAMS). The performance of LSE is relatively sensitive to noises in measurements. Therefore, the estimation accuracy relies heavily on the accuracy of the estimation matrix, which is directly influenced by the measurement weight matrix. This paper proposes two novel calibration method of the estimation matrix using neural networks. One is based on the minimum absolute network loss (ANL), and the other is based on the minimum average squared network loss (ASNL). Both methods are tested and compared with LSE algorithms on the IEEE 14-bus system

neural network↗

Novel method to control explosive shock sensitivity: A mesoscale study to understand the effect of thermally expandable microsphere (TEM) inclusions in high explosives (HE) microstructure

When the void content and/or void structure of a high explosive (HE) is altered by some means (i.e., bulk heating or mechanical damage), the shock initiation behavior of the material changes. The ability to precisely predict the change in shock sensitivity after an HE has undergone microstructural changes is a crucial capability in multi-scale reactive flow models. Here, we utilize thermally expandable microspheres (TEMs) as a dopant in a polymer bonded explosive (PBX) matrix to alter the shock initiation properties in a controlled fashion. Here, using a mesoscale modeling approach, we evaluated how a single TEM (before and after thermal expansion) behaves under shock compression, as well as how the matrix PBX in the direct vicinity of the TEM is affected. We first examined the effect of an unexpanded TEM in the explosive matrix and found that its presence does not significantly perturb the bulk flow and by extension will not affect bulk sensitivity. Next, we examined the effect of an expanded TEM and found that its presence significantly perturbs the flow via hydrodynamic jetting, which causes a secondary shock wave with a strength that exceeds that of the incident wave. Finally, we showed that this secondary shock interacts with the downstream porosity to ignite a larger fraction of the overall pore volume, commensurate with the secondary shock strength and the affected volume, increasing the global (bulk) shock sensitivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modelling electron transfer in photosystem I: limits and perspectives

Uncovering the parameters underlying the electron transfer (ET) in photosynthetic reaction centres is of importance for understanding the molecular mechanisms underpinning their functionality. The reductive nature of most cofactors involved in photosynthetic ET makes the direct estimation of their properties difficult. Photosystem I (PSI) operates in a highly reducing regime, making the assessment of cofactor properties even more difficult. Kinetic modelling coupled to a non-adiabatic description of ET is a useful approach in overcoming this hindrance. Here we review the theory and modelling approaches that have been used in assessing parameters associated with ET reactions in PSI, with particular attention to ET reactions involving the phylloquinones and the iron–sulphur clusters. In most modelling studies, the goal is to estimate the driving force of ET, which is usually associated with the cofactor midpoint potentials. The driving force is sensitive to many factors, which define the ET rate, i.e. the reorganisation energy, the coupling with nuclear modes and the electronic matrix elements, which are explored and discussed here. The importance of an inclusive modelling of both forward and reverse ET processes is discussed and highlighted. It is shown that although estimates are indeed sensitive to the exact parameter sets employed in the modelling, a general consensus is still attained, pointing to a scenario where $ΔG^0_{A_{tA→Fx}}/ΔG^0_{A_{tB→Fx}}$ is weakly endergonic/exergonic, respectively. It is emphasised that to further refine those estimates, it will require a joint effort between computational modelling and more wide-ranging experimental studies.

59 BASIC BIOLOGICAL SCIENCES↗

Baryon number violation: from nuclear matrix elements to BSM physics

Processes that violate baryon number, most notably proton decay and $n\bar{n}$ transitions, are promising probes of physics beyond the Standard Model (BSM) needed to understand the lack of antimatter in the Universe. To interpret current and forthcoming experimental limits, theory input from nuclear matrix elements to UV complete models enters. Thus, an interplay of experiment, effective field theory, lattice QCD, and BSM model building is required to develop strategies to accurately extract information from current and future data and maximize the impact and sensitivity of next-generation experiments. Here, we briefly summarize the main results and discussions from the workshop ‘INT-25-91W: Baryon Number Violation: From Nuclear Matrix Elements to BSM Physics,’ held at the Institute for Nuclear Theory, University of Washington, Seattle, WA, 13–17 January 2025.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High precision monitoring of outgassing species in model EUV photoresists with a cavity ring-down spectrometer

Extreme ultraviolet (EUV) photoresists play a pivotal role in advancing nanopatterning technologies by balancing image quality and sensitivity. The outgassing behavior of photoresist thin films under EUV and deep ultraviolet (DUV) exposure reveals chemical details relevant to their performance. This study focuses on utilizing an analytical technique not previously used in photolithography, the tabletop cavity ring-down spectrometer, to investigate outgassing dynamics in EUV photoresists, enabling precise chemical identification and deeper insights into resist processing. The spectrometer’s enhanced laser path length (~20 km) and broadband absorption capabilities in the CH overtone region allow for sensitive and temporally resolved detection of outgassed species. Using a model resist comprising a polymer matrix with a photoacid generator and quencher, we analyzed the influence of time delays between exposure and Post-Exposure Bake (PEB) as well as storage under varying environmental conditions. Suppression of isobutylene outgassing and thickness loss was observed with extended delays between exposure and PEB, potentially linked to water absorption and acid deactivation. The technique proved highly effective in distinguishing subtle chemical differences between processing stages. Delay times and their environmental conditions, particularly humidity, reduce outgassing and thickness loss of photoresists during PEB, suggesting decreased acid-driven deprotection. This can potentially impact sensitivity, defectivity, and roughness of resist patterns, necessitating precise monitoring and control.

Lüttgenau, Bernhard↗

Global chromatin fibre compaction in response to DNA damage

Highlights: Black-Right-Pointing-Pointer Robust KAP1 phosphorylation in response to DNA damage in HCT116 cells. Black-Right-Pointing-Pointer DNA repair foci are found in soluble chromatin. Black-Right-Pointing-Pointer Biophysical analysis reveals global chromatin fibre compaction after DNA damage. Black-Right-Pointing-Pointer DNA damage is accompanied by rapid linker histone dephosphorylation. -- Abstract: DNA is protected by packaging it into higher order chromatin fibres, but this can impede nuclear processes like DNA repair. Despite considerable research into the factors required for signalling and repairing DNA damage, it is unclear if there are concomitant changes in global chromatin fibre structure. In human cells DNA double strand break (DSB) formation triggers a signalling cascade resulting in H2AX phosphorylation ({gamma}H2AX), the rapid recruitment of chromatin associated proteins and the subsequent repair of damaged sites. KAP1 is a transcriptional corepressor and in HCT116 cells we found that after DSB formation by chemicals or ionising radiation there was a wave of, predominantly ATM dependent, KAP1 phosphorylation. Both KAP1 and phosphorylated KAP1 were readily extracted from cells indicating they do not have a structural role and {gamma}H2AX was extracted in soluble chromatin indicating that sites of damage are not attached to an underlying structural matrix. After DSB formation we did not find a concomitant change in the sensitivity of chromatin fibres to micrococcal nuclease digestion. Therefore to directly investigate higher order chromatin fibre structures we used a biophysical sedimentation technique based on sucrose gradient centrifugation to compare the conformation of chromatin fibres isolated from cells before and after DNA DSB formation. After damage we found global chromatin fibre compaction, accompanied by rapid linker histone dephosphorylation, consistent with fibres being more regularly folded or fibre deformation being stabilized by linker histones. We suggest that following DSB formation, although there is localised chromatin unfolding to facilitate repair, the bulk genome becomes rapidly compacted protecting cells from further damage.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Rapid, non-destructive carbon analysis of forest soils using neutron-induced gamma-ray spectroscopy

Forest soils are pivotal to understanding global carbon (C) cycling and evaluating policies for mitigating global change. However, they are very difficult to monitor because of the heterogeneity of soil characteristics, the difficulty of representative sampling, and the slow time scale of response to environmental change. Here we demonstrate that use of gamma-ray spectroscopy facilitates in situ non-destructive analysis of C and other elements in forest soils. In this approach the element-specific gamma-rays are induced by fast and thermal neutrons interacting with the nuclei of the elements present in the soil. Background gamma-rays emanating from naturally occurring radionuclides in the forest are recorded as well. We applied this approach in a mature northern hardwood forest on glacial till soils at the Bartlett Experimental Forest in New Hampshire, USA. The inelastic neutron scattering (INS) system yielded strong signals in gamma-ray counts/h, from C and other elements present in the soil matrix that included silicon, oxygen, hydrogen, iron, aluminum, manganese and potassium. The INS sensitivity for carbon was 20.656 counts h{sup -1} kg{sup -1} C m{sup -2} based on current net C gamma-ray counts and the data for the O horizon and mineral soil to a depth of 30 cm obtained from a nearby quantitative soil pit (7.35 kg C m{sup -2}). We estimate the minimum detectable change to be {approx}0.34 kg C m{sup -2}, which is {approx}5% of the current soil C content, and the minimum detectable limit to be {approx}0.23 kg C m{sup -1}. Eight % reproducibility from 11 measurements was limited, in part, by the large variability in the system counting geometry due to the uneven forest microtopography. The INS approach has the potential to revolutionize belowground monitoring of C and other elements, because the possibility of detecting a 5% change in forest soils has not been possible with destructive sampling methods.

08 HYDROGEN↗

Chemical and Structural Alterations in the Amorphous Structure of Obsidian due to Nanolites

Obsidian is volcanic glass that results from the rapid cooling of silica-rich melt. Nanoscale crystallites precipitate out of the melt prior to solidification and remain embedded in the amorphous matrix. These crystallites provide information on the flow kinetics and composition of the melt. Due to the sparsity and size of nanolites, studies often focus on supramicron crystallites. This research takes advantage of the conchoidal fracture of obsidian by knapping samples with nanometer-thin edges for transmission electron microscopy characterization. Nanolites in the amorphous matrix are studied using energy-dispersive spectroscopy (EDS) and electron diffraction. Certain alkali and alkaline-earth cations exhibit patterns of depletion near Fe-oxide nanolites. EDS is used to identify nanolites and variations in the composition of the matrix. Parallel beam diffraction and radial distribution function analysis of nearest-neighbor distances determine average bond lengths in the matrix near nanolites, showing that nanolites influence the nearby short-range ordering and atomic character of the matrix. Analysis reveals decreased mean nearest-neighbor distances in the matrix adjacent to nanolites compared to the bulk. Our methods exhibit the required sensitivity to detect variations in the composition and structure near nanolites, and our findings indicate that obsidian nanolites contribute to quantifiable localized changes in the amorphous structure.

36 MATERIALS SCIENCE↗

Surface-Initiated Atom Transfer Radical Polymerization Using Hydrogel Reactors

Atom transfer radical polymerization (ATRP) is a controlled radical polymerization method that enables the synthesis of tailored polymeric materials with low dispersity, highlighting its immense potential for green fabrication of advanced materials. However, its broader implementation is limited by challenges in product isolation, maintaining catalyst activity, and mitigating atmospheric sensitivity arising from oxygen-sensitive metal catalysts. Here, gelatin hydrogels (GHs) are introduced as a soft “reactor” matrix for interfacial ATRP, operating with minimal metal-catalyst loading while exhibiting possibly an organoreductive behavior. This strategy leverages activator regeneration via electron transfer through a ligand–metal charge-transfer (LMCT) mechanism to reduce oxidized metal catalysts within the GH network. Polymerization is evaluated by growing polymer brushes at an active interface formed between GHs swollen in monomer solution and an initiating surface, and sequential growth experiments confirmed that GH-mediated ATRP preserves living character. Under UV illumination, LMCT is activated, producing polymers both at the desired interface and within the GH bulk. UV–Vis spectroscopy revealed active reduction of Cu(II) to Cu(I) along with concentration-dependent complex formation, indicating dynamic coordination chemistry within the hydrogel. The redox-active arginine- and glutamic acid-rich gelatin backbone coordinates and reduces the metal center, enabling ATRP at ppm-level catalyst concentrations. While polymerization proceeds in GH-Cu(II) reactors, adding external mobile ligands to the GH results in longer polymer brushes. Here, the results reported here are exploratory. More experiments are needed to characterize polymer brush growth in GHs and compare it to conventional surface-initiated polymerization in solution.

Absorption↗

Selective detection of singlet gerade metastable states of N{sub 2}

Metastable N{sub 2} molecules produced by electron impact on N{sub 2} are detected using a unique solid nitrogen matrix detector. The time-of-flight system is shown to be selectively sensitive to a{sup 1}Π{sub g} and {sup 1}Σ{sub g}{sup +} or {sup 1}Γ{sub g} metastable species. The latter species had been identified theoretically previously but was detected experimentally for the first time in the present investigation. Their identification and excitation as a function of electron energy from threshold to 300 eV are presented. Comparison is made with the data obtained by other techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Lyman β forest as a cosmic thermometer

We present a comprehensive analysis of high resolution hydrodynamic simulations in terms of Lyman α and Lyman β one dimensional flux power spectra P{sub αα} and P{sub ββ}). In particular, we focus on the behaviour that the flux auto-power spectra and cross-power spectra P{sub αβ}) display when the intergalactic medium (IGM) thermal history is changed in a range of values that bracket a reference model, while cosmological parameters are kept fixed to best fit the cosmic microwave background data. We present empirical fits that describe at the sub-percent level the dependence of the power spectra on the thermal parameters. At the largest scales, the power spectra show a constant bias between each other that is set by the parameters describing the IGM thermal state. The cross-power spectrum has an oscillatory pattern and crosses zero at a scale which depends on T{sub 0}, the IGM temperature at the mean density, for reasonable values of the power-law index γ of the IGM temperature-density relation T=T{sub 0}(1+δ){sup γ-1}). By performing a Fisher matrix analysis, we find that the power spectrum P{sub ββ} is more sensitive to the thermal history than P{sub αα} alone, due to the fact that it probes denser regions than Lyman α. When we combine the power and cross spectra the constraints on γ can be improved by a factor ∼ 4, while the constraints on T{sub 0} improve by a factor of ∼ 2. We address the role of signal-to-noise and resolution by mocking realistic observations and we conclude that the framework presented in this work can significantly improve the knowledge of the IGM thermal state, which will in turn guarantee better constraints on IGM-derived cosmological parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

Analytic marginalization of N(z) uncertainties in tomographic galaxy surveys

In this paper, we present a new method to marginalize over uncertainties in redshift distributions, N(z), within tomographic cosmological analyses applicable to current and upcoming photometric galaxy surveys. We allow for arbitrary deviations from the best-guess N(z) governed by a general covariance matrix describing the uncertainty in our knowledge of redshift distributions. In principle, this is marginalization over hundreds or thousands of new parameters describing potential deviations as a function of redshift and tomographic bin. However, by linearly expanding the theory predictions around a fiducial model, this marginalization can be performed analytically, resulting in a modified data covariance matrix that effectively downweights the modes of the data vector that are more sensitive to redshift distribution variations. We showcase this method by applying it to the galaxy clustering measurements from the Hyper Suprime-Cam first data release. We illustrate how to marginalize over sample variance of the calibration sample and a large general systematic uncertainty in photometric estimation methods, and explore the impact of priors imposing smoothness in the redshift distributions.

79 ASTRONOMY AND ASTROPHYSICS↗

A search for the Higgs boson in H→WW→lvlv with 802 fb -1

This thesis documents a search for Standard Model (SM) Higgs boson to WW production in the final state of two charged leptons (e, μ) and two neutrino final state resulting from in pp collisions at √ s = 1.96 TeV. The data collected by the CDF II detector at the Tevatron collider at Fermilab, corresponds to an integrated luminosity of 8.2 fb -1 . This iteration of the analysis incorporated several improvements to increase Higgs sensitivity. We reevaluated lepton isolation values to recover signal events in which leptons mutually spoil each other’s isolation requirements. We additionally incorporated new lepton identification selections, namely likelihood based forward electrons and a better recovery of electrons passing through detector cracks. The base analysis searches for opposite-sign dilepton events. We employed three separately trained neural networks to distinguish signal from background processes for events with 0, one, or two jets. To further increase sensitivity for 0-jet events, we constructed a likelihood ratio discriminant based on Matrix Element calculations as an additional input to the neural network. For the base opposite-sign analysis, summing over all jet multiplicities, we observed 3513 events in data compared with a background expectation of 3409 ± 233 and a signal expectation of 53.6 ± 9.4 for a mass of 165 GeV/c 2 . To further increase signal acceptance, we incorporated several separate search regions in addition to the base analysis. We include subchannels searching for Higgs production in events with low dilepton invariant mass and in events having final states with either same-sign dileptons or trileptons With the combination of the separate analyses, we observed a 95% C.L. upper production limit of 0.77 times the SM expectation for a Higgs mass of 165 GeV/c 2 to be compared with the value for the median of the expected limit (0.78). We additionally present results for eighteen Higgs masses ranging from 110 GeV/c 2 to 200 GeV/c 2 . We excluded at the 95% C.L., a SM Higgs boson in the mass range between 156 and 175 GeV/c 2 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗