Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shear strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A discrete dislocation dynamics study of precipitate bypass mechanisms in nickel-based superalloys

Order strengthening in nickel-based superalloys is associated with the extra stress required for dislocations to bypass the $\gamma'$ precipitates distributed in the $\gamma$ matrix. Depending on the operating conditions and microstructure, a rich variety of bypass mechanism has been identified, with various shearing and Orowan looping processes gradually giving way to climb bypass as the operating conditions change from the low/intermediate temperatures and high stress regime, to the high temperature and low stress regime. When anti phase boundary (APB) shearing and Orowan looping mechanisms operate, the classical picture is that, at for a given volume fraction, the bypass mechanism changes from shearing to looping with increased particle size and within a broad coexistence size window. Another possibility, which is supported by indirect experimental evidence, is that a third “hybrid” transition mechanism may operate. Here, in this paper we use discrete dislocation dynamics (DDD) simulations to study dislocation bypass mechanisms in Ni-based superalloys. We develop a new method to compute generalized stacking fault forces in DDD simulations, based on a concept borrowed from complex analysis and known as the winding number of a closed curve about a point. We use this method to study the mechanisms of bypass of a square lattice of spherical $\gamma'$ precipitates by $a/2\langle110\rangle$ {111} edge dislocations, as a function of the precipitates volume fraction and size. We show that not only the hybrid mechanism is possible, but also that it operates as the transition mechanism between the shearing and looping regimes over a wide range of precipitates volume fraction and radii. Based on our simulation results, we propose a simple model for the strength of this mechanism. We also consider the effects of a $\gamma$/$\gamma'$ lattice misfit on the bypass mechanisms, which we approximate by an additional precipitate stress computed according to Eshelby’s inclusion theory. We show that in the shearing and hybrid looping-shearing regimes, a lattice misfit generally results in an increased bypass stress. For sufficiently high lattice misfit, the critical bypass configuration in attractive dislocation-precipitates interactions changes dramatically, and the bypass stress is controlled by the pinning of the trailing dislocation on the exit side of the precipitates, similar to what has been reported in the high-temperature creep literature.

36 MATERIALS SCIENCE↗

A better understanding of the mechanics of borehole breakout utilizing a finite strain gradient-enhanced micropolar continuum model

Borehole breakout denotes the failure in rock mass subjected to drilling, caused by stress concentrations exceeding the material strength. Depending on the material properties, the preexisting in situ stress state, and the borehole dimensions, different types of borehole breakout, such as spiral-shaped breakout or v-shaped breakout, are distinguished in the literature. In the present work, we address the influence of the material properties on the predicted borehole breakout mode in a comprehensive finite element study. To this end, herein we employ a gradient-enhanced micropolar damage-plasticity model based on the Mohr–Coulomb strength criterion, formulated in the finite strain regime, which is calibrated based on experimental results from plane strain compression tests on Red Wildmoor sandstone. In the numerical study, the influence of the in situ stress state, the material friction angle, plastic dilation, post peak residual strength, and the inherent material length scale parameters are investigated. Thereby, we demonstrate that depending on the material parameters, substantially different failure modes, characterized by strongly localized shear bands or diffuse failure zones, are predicted. It is shown that in particular the brittleness of the material in the post peak regime has a major influence on the predicted breakout type. Moreover, a statistical validation of the results is obtained by considering different random field distributions of the initial material strength.

58 GEOSCIENCES↗

Modeling the non-Schmid crystallographic slip in MAX phases

We present a crystal plasticity constitutive relation for the description of experimentally observed non-Schmid crystallographic slip in a class of ternary carbides and nitrides commonly referred to as MAX phases. In the constitutive relation, we assume that the evolution of the slip system strength in MAX phases has two components – a classical component that depends on the Taylor cumulative shear strain and a non-Schmid component that depends on the stress normal to the slip plane. The non-Schmid crystal plasticity constitutive relation is then used to carry out finite element simulations of micropillar compression of single crystals of two MAX phases, Ti 2 AlC and Ti 3 AlC 2 . The finite element simulations not only quantitatively predict the stress – strain response of a wide range of crystallographic orientations of the micropillars but also rationalize the non-uniform deformation and the deformed shape of the micropillars observed in the experiments for the two materials. As a result, parametric studies are also carried out to quantify the role of the non-Schmid effect and understand the effects of key experimental parameters on the stress – strain response of the micropillars of the two MAX phases.

36 MATERIALS SCIENCE↗

Shock response of cobalt-based cemented tungsten carbides at pressures up to 100 GPa

In the present study, shock wave experiments are conducted on General Carbide cemented tungsten carbides with 3.7 wt.% and 6.0 wt.% cobalt binder to determine their shock compression response up to 100 GPa. A three-stage particle velocity profile is observed in the experiments -- an initial elastic-rise to the Hugoniot elastic limit (HEL), an elastic-plastic ramp indicating post-yield hardening, and finally a rise to the peak shocked Hugoniot state. The results of the experiments are used to determine the HEL, shock velocity (U s ) vs. particle velocity (u p ) Hugoniot relationship, and the longitudinal stress vs. specific volume Hugoniot relationship for the two samples. Here, the HEL for the WC 3.7wt% Co and WC 6.0wt% Co samples was determined to be ~4.45 GPa and 3.72 GPa, respectively. The U s – u p relation was determined to be U s = 4.97(0.006)+1. 446 (0.018) u p for WC 3.7 wt.% Co and U s = 4.93(0.006)+1. 454(0.017)u p for the WC 6.0 wt.% Co sample at peak particle velocities>0.75 km/s. For both WC grades, in the particle velocity regime less than ~0.75 km/s, the measured shock wave velocities were found to be larger than those predicted by the linear U s –u p Hugoniot relationship, indicating the two WC samples to preserve substantial strength in the post-yield deformation regime. Both WC grades show a catastrophic drop in shear stress carrying capacity when shocked to longitudinal stresses greater than ~70 GPa.

36 MATERIALS SCIENCE↗

Molecular dynamics simulation of hydrodynamic transport coefficients in plasmas

Molecular dynamics simulations are used to calculate transport coefficients in a two-component plasma interacting through a repulsive Coulomb potential. The thermal conductivity, electrical conductivity, electrothermal coefficient, thermoelectric coefficient, and shear viscosity are computed using the Green–Kubo formalism over a broad range of Coulomb coupling strength, 0.01 ≤ Γ ≤ 140. Emphasis is placed on testing standard results of the Chapman–Enskog solution in the weakly coupled regime (Γ ≪ 1) using these first-principles simulations. As expected, the results show good agreement for Γ ≲ 0.1. However, this agreement is only possible if careful attention is paid to the definitions of linear constitutive relations in each of the theoretical models, a point that is often overlooked. For example, the standard Green–Kubo expression for thermal conductivity is a linear combination of thermal conductivity, electrothermal, and thermoelectric coefficients computed in the Chapman–Enskog formalism. Meaningful results for electrical conductivity are obtained over the full range of coupling strengths explored, but it is shown that potential and virial components of the other transport coefficients diverge in the strongly coupled regime (Γ ≫ 1). In this regime, only the kinetic components of the transport coefficients are meaningful for a classical plasma.

Electrical conductivity↗

Design of a High Toughness Epoxy for Superconducting Magnets and Its Key Properties

Nb 3 Sn accelerator magnets are poised to enable the luminosity upgrade of the Large Hadron Collider (LHC) at CERN, improving its potential for exploring physics beyond the standard model of particle physics. The prototype Nb 3 Sn magnets consistently need 10–25 quenches to achieve their best performance. A hypothesis is that the long training of these magnets may at least be partially induced by epoxy cracking and bonding failures. In 2018, we showed that several existing epoxies have a higher toughness and less tendency to crack at low temperatures than CTD-101K, the epoxy resin with which almost all Nb 3 Sn accelerator magnets have been impregnated. Here we explore a new high toughness formulation for reducing quench training of Nb 3 Sn accelerator magnets, through combining two amine curing agents to achieve a good glass transition temperature (T g ), adding a viscosity reducer to achieve low viscosity, and experimenting a coupling agent for improved bonding strengths. In this work, we report results of comprehensive materials tests, including thermal shock, tensile, compressive, shear tests, viscosity and T g tests.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polymer-Grafted Cellulose Nanofibrils with Enhanced Interfacial Compatibility for Stronger Poly(lactic acid) Composites

Cellulose nanofibrils (CNFs) are a promising reinforcement for biodegradable composite matrices such as poly(lactic acid) (PLA), but they require commercially scalable drying methods that preserve their fibrillar morphology along with improved interfacial interactions with polymer matrices. In this work, a water-based grafting-through polymerization scheme to modify CNFs improved spray drying behavior and reinforcement capacity in PLA composites. All polymer modifications yielded CNFs with a more fibrillar morphology after spray drying, increasing specific surface area by up to 490% compared to unmodified CNFs, values similar to conventional freeze drying. Polymer-grafted CNFs in PLA composites improved the tensile strength by 16% at 20 wt % loading and stiffness by 22% at a 10 wt % loading with two different graft-polymer chemistries compared to unmodified CNF composites. Surface energy heterogeneity measurements of the reinforcements and PLA matrix were employed to understand the improvements in composite properties. Polymer modifications lowered the total surface energy of the CNFs, and calculated ratios of work of adhesion to work of cohesion suggested improved interfacial compatibility for four of the modified CNFs with PLA. Rheological oscillatory shear studies of the composites correlated solid-like melt behavior, as demonstrated by storage moduli dominance, with higher tensile strength. Thermal analysis of the composites revealed that excessive plasticization by the poly(oligoethylene glycol methyl ether methacrylate)-grafted sample potentially offset mechanical property improvements imparted by the more fibrillar morphology. This work provides an opportunity for large-scale manufacturing of CNF/PLA composites via an entirely aqueous modification scheme and industrially relevant spray drying process.

36 MATERIALS SCIENCE↗

The Effect of Calcium on the Cohesive Strength and Flexural Properties of Low-Methoxyl Pectin Biopolymers

Pectin binds the mesothelial glycocalyx of visceral organs, suggesting its potential role as a mesothelial sealant. To assess the mechanical properties of pectin films, we compared pectin films with a less than 50% degree of methyl esterification (low-methoxyl pectin, LMP) to films with greater than 50% methyl esterification (high-methoxyl pectin, HMP). LMP and HMP polymers were prepared by step-wise dissolution and high-shear mixing. Both LMP and HMP films demonstrated a comparable clear appearance. Fracture mechanics demonstrated that the LMP films had a lower burst strength than HMP films at a variety of calcium concentrations and hydration states. The water content also influenced the extensibility of the LMP films with increased extensibility (probe distance) with an increasing water content. Similar to the burst strength, the extensibility of the LMP films was less than that of HMP films. Flexural properties, demonstrated with the 3-point bend test, showed that the force required to displace the LMP films increased with an increased calcium concentration ( p < 0.01). Toughness, here reflecting deformability (ductility), was variable, but increased with an increased calcium concentration. Similarly, titrations of calcium concentrations demonstrated LMP films with a decreased cohesive strength and increased stiffness. We conclude that LMP films, particularly with the addition of calcium up to 10 mM concentrations, demonstrate lower strength and toughness than comparable HMP films. These physical properties suggest that HMP has superior physical properties to LMP for selected biomedical applications.

Biochemistry & Molecular Biology↗

Dynamic Shear Deformation of a Precipitation Hardened Al 0.7 CoCrFeNi Eutectic High-Entropy Alloy Using Hat-Shaped Specimen Geometry

Lamellar eutectic structure in Al 0.7 CoCrFeNi high-entropy alloy (HEA) is emerging as a promising candidate for structural applications because of its high strength-ductility combination. The alloy consists of a fine-scale lamellar fcc + B2 microstructure with high flow stresses > 1300 MPa under quasi-static tensile deformation and >10% ductility. The response to shear loading was not investigated so far. This is the first report on the shear deformation of a eutectic structured HEA and effect of precipitation on shear deformation. A split-Hopkinson pressure bar (SHPB) was used to compress the hat-shaped specimens to study the local dynamic shear response of the alloy. The change in the width of shear bands with respect to precipitation and deformation rates was studied. The precipitation of L1 2 phase did not delay the formation of adiabatic shear bands (ASB) or affect the ASB width significantly, however, the deformed region around ASB, consisting of high density of twins in fcc phase, was reduced from 80 μm to 20 μm in the stronger precipitation strengthened condition. We observe dynamic recrystallization of grains within ASBs and local mechanical response of individual eutectic lamellae before and after shear deformation and within the shear bands was examined using nano-indentation.

36 MATERIALS SCIENCE↗

Extended Barton–Bandis model for rock joints under cyclic loading: Formulation and implicit algorithm

In this paper, the Barton–Bandis model for rock joints is extended to cyclic loading conditions, without any new material parameter. Also developed herein is an implicit solution algorithm for the extended Barton–Bandis model, which can also be used for the original Barton–Bandis model for which an implicit algorithm has been unavailable. To this end, we first cast the Barton–Bandis model into an incremental elasto-plastic framework, deriving an expression for the elastic shear stiffness being consistent with the original model formulation. We then extend the model formulation to cyclic loading conditions, incorporating the dependence of shear stress and dilation on the joint position and the shearing direction. The extension is achieved by introducing a few state-dependent variables which can be calculated with the existing material parameters. For robust and accurate utilization of the model, we also develop an implicit algorithm based on return mapping, which is unconditionally stable and guarantees the satisfaction of the strength criterion. We verify that the proposed model formulation and algorithm produce virtually the same results as the original Barton–Bandis model under monotonic shearing conditions. Here, we then validate the extended Barton–Bandis model against experimental data on natural rock joints under cycling loading conditions. The present work thus enables the Barton–Bandis model, which has been exceptionally popular in research and practice, to be applicable to a wider range of problems in rock mechanics and rock engineering.

58 GEOSCIENCES↗

Influence of high-strain-rate compression and subsequent heat treatment on (TiNbZr) 89 (AlTa) 11 refractory high-entropy alloys: Dynamic-mechanical behavior and microstructural changes

This study explored the dynamic-mechanical behavior of a novel low-density (TiNbZr) 89 (AlTa) 11 refractory high-entropy alloy (RHEA) across strain rates ranging from 1.0×10 3 to 3.5×10 3 s –1 . A significant increase in the yield and ultimate compressive strengths with rising strain rates up to 3.0×10 3 s –1 was observed and attributed to enhanced dislocation activities and stress-induced microstructural transformations. The formation of the B2 phase and Zr 5 Al 3 precipitates was found to be crucial in bolstering the alloy strength at high strain rates. Beyond strain rates of 3.0×10 3 s –1 , a decrease in strength occurred due to thermal softening and strain localization. Microstructural analyses at 3.5×10 3 s –1 revealed grain refinement, the development of micro shear bands, and dislocation tangles, which were indicative of dynamic recrystallization. Besides, the findings also revealed that the post-dynamic compression heat treatment further enhanced the hardness and microstructural stability of the alloy. These results highlight the potential of the (TiNbZr) 89 (AlTa) 11 RHEA for applications requiring materials with high strength-to-weight ratios, particularly in dynamically loaded environments. It is expected that the results of this study will further advance our fundamental understanding of the behavior of RHEAs under extreme conditions, thereby opening new avenues for material innovation.

36 MATERIALS SCIENCE↗

Calibration and validation of the foundation for a multiphase strength model for tin

In this work, the Common Model of Multi-phase Strength and Equation of State (CMMP) model was applied to tin. Specifically, calibrations of the strength-specific elements of the CMMP foundation were developed with a combination of experiments and theory, and then the model was validated experimentally. The first element of the foundation is a multi-phase analytic treatment of the melt temperature and the shear modulus for the solid phases. These models were parameterized for each phase based on ab initio calculations using the software VASP (Vienna Ab initio Simulations Package) based on density functional theory. The shear modulus model for the ambient phase was validated with ultrasonic sound speed measurements as a function of pressure and temperature. The second element of the foundation is a viscoplastic strength model for the phase, upon which strength for inaccessible higher-pressure phases can be scaled as necessary. The stress–strain response of tin was measured at strain rates of 10 -3 to 3 x 10 3 s -1 and temperatures ranging from 87 to 373 K. The Preston–Tonks–Wallace (PTW) strength model was fit to that data using Bayesian model calibration. For validation, six forward and two reverse Taylor impact experiments were performed at different velocities to measure large plastic deformation of tin at strain rates up to ⁠10 5 s -1 . The PTW model accurately predicted the deformed shapes of the cylinders, with modest discrepancies attributed to the inability of PTW to capture the effects of twinning and dynamic recrystallization. Some material in the simulations of higher velocity Taylor cylinders reached the melting temperature, thus testing the multiphase model because of the presence of a second phase, the liquid. In simulations using a traditional modeling approach, the abrupt reduction of strength upon melt resulted in poor predictions of the deformed shape and non-physical temperatures. With CMMP, the most deformed material points evolved gradually to a mixed solid–liquid but never a fully liquid state, never fully lost strength, stayed at the melt temperature as the latent heat of fusion was absorbed, and predicted the deformed shape well.

36 MATERIALS SCIENCE↗

Material Property Determinations for Rock Valley Legacy Samples in Support of Source Physics Experiment

The Source Physics Experiment (SPE) is a long-term NNSA research and development effort designed to improve nonproliferation verification and monitoring capabilities. The overarching goals of the SPE program are to improve understanding of prompt signals and physical signatures that develop from underground chemical explosions and associated modeling capabilities. Our work focuses on a primary factor controlling chemical explosion induced signals and signatures: the material properties of the rocks in which the chemical explosion takes place. This document reports on material property determinations of legacy core USGS Test Well F and outcrop analogs for the subsurface stratigraphy for the third phase of SPE in the Rock Valley (RV) area of the Nevada National Security Site (NNSS). The objective of this work is to establish a baseline set of lithologic descriptions and material properties expected prior to observatory borehole drilling in support of the SPE-RVDC (Rock Valley Direct Comparison) experiment. We determine for each rock type the compressional failure envelope, elastic properties as a function of stress (bulk modulus versus mean stress, shear modulus versus shear stress, Young’s modulus versus axial stress and Poisson’s ratio versus axial stress), indirect tensile strength, and porosity. Geologic characterization, both at the core-scale and microscale, provides context for using the data in modeling efforts and to inform interpretations for the material properties testing.

36 MATERIALS SCIENCE↗

Unraveling the Determinant Mechanisms in Flow-Mediated Crystal Growth and Phase Behaviors

To uncover the critical mechanisms responsible for mesoscopic level development during flow-mediated crystal growth, we develop a semi-two-way hydrodynamic coupled structural phase-field crystal formalism (HXPFC-s2). The new formalism, inspired by previous attempts at coupling hydrodynamic and phase-field crystal (PFC) equations, allows for studying mesoscopic flow-mediated crystallization at diffusive timescales pertinent to industrial applications. Unlike previous efforts, the devised coupling to the structural PFC (XPFC) equations allows generalization to more complex crystal structures through explicit parameterization of the direct correlation function (DCF). Utilizing the HXPFC-s2 formalism, we seek to uncover the determinant physical mechanisms in crystallization under simple shear flows by comparing temperature-driven crystallization to flow-mediated crystallization under varying flow-strengths. Parallels and deviations of under-cooling and flow-strength effects on crystal growth are drawn using the crystal cluster-size and system ordering time evolutions. In doing so, we identify scaling behaviors with a Peclet-like number, Pe∼, a critical Peclet-like number, Pe∼*, and flow-field-crystal plane-dependent interactions. Our findings may be relevant for controlling crystal growth and phase behaviors in flow applications.

Willis, L. Connor (ORCID:0009000961321848)↗

C‐Cracking of Brittle‐Material Spheres From Eccentric Hertzian Contact

Contact of brittle-material spheres can occur while they are manufactured, handled, or used in operation as roller elements or in deformably processed composite material. Statistically, the directional contact between two spheres will nearly always be oblique or eccentric in an unconfined and mobile sphere population. Although analyses of oblique contact exist, the portrayal of its maximum (tensile) first principal stress ( S 1 ) field is lacking. This information is needed for improved judgment of the prospect of crack initiation. Given these, the S 1 due to eccentric contact and subsequent crack initiation was analyzed using finite element analysis (FEA) and corroborative demonstration of c-crack creation. The FEA shows that an asymmetric S 1 field is created about the contact patch and is caused by superimposed shear intrinsic to eccentric contact. A crack will initiate if the maximum S 1 exceeds the material's tensile strength, and its field will cause the crack to propagate and arrest to form a C-shaped crack, or c-crack. C-crack initiation trends with lower applied forces, with greater amount of contact eccentricity, higher coefficient of friction, and smaller spherical radius. Finally, these metrics deserve recognition, especially when c-cracked brittle-material spheres are used in a system whose functionality or reliability is potentially compromised by the c-cracks.

Hertzian contact↗

Rheological characterization of 3D printable geopolymers

This study demonstrates a two-step approach that enables quantification of concrete printability through dynamics mode rheological measurements; I) modeling shearing history during extrusion; II) monitoring the hardening evolution of deposited material by applying a strain smaller than the critical strain. It is shown that the shearing history of the material is removed by imposing a pre-shearing above the critical strain, and zero value yield stress is measured for all specimens. At step II, a linear extrapolation of the green strength development can quantify the static yield stress at the origin, which we used to quantify the material printability. As far as this yield stress surpasses the stress level that exists in the printed structure, the material retains its shape stability. We show the performance of the model on a series of geopolymer mortars with a wide range of rheological properties as a function of material composition, aging, and pre-shearing consequences.

36 MATERIALS SCIENCE↗

Fracture resistance of hierarchical Cu–Mo nanocomposite thin films

We report the fracture behavior of high-temperature co-sputtered Cu/Mo nanocomposite thin films was investigated through in situ 3-point bend testing of pre-notched microbeams in SEM. The as-synthesized nanocomposites present hierarchical nano/microstructures composed of a matrix of phase-separated Cu–Mo with nanoscale ligaments dispersed with sub-micron scale Cu-rich islands containing Mo nano-precipitates. Results show a significant crack growth resistance in the hierarchical nanocomposite, several times higher than that measured in Cu/Mo nanoscale multilayers. Based on electron microscopy characterization, three mechanisms of crack growth resistance in the hierarchical structures are proposed: crack bridging by the Cu-rich layer, crack deflection via shear along the Cu/Mo interface, and multiple cracking. This work demonstrates an approach to increase toughness in high strength nanocomposites through interface micro-structure design.

36 MATERIALS SCIENCE↗

Compatibilization Strategy and Mechanism for Co-stabilizing Commingled Plastics and Pyrolyzed Rubber in Asphalt

Hot mix asphalt mixture is considered the ideal approach to reuse waste plastics in high-value applications because of its very high amount of usage in highway construction. However, the differences in polarity and density between polymers and asphalt lead to polymer coalescence and therefore the poor storage stability of modified asphalt. These challenges are exalted when recycling commingled plastics. This study introduced an innovative compatibilization strategy and mechanism for co-stabilizing commingled plastics and pyrolyzed rubber in asphalt. Commingled plastics were first grafted with maleic anhydride for surface activation, followed by reactive kneading with pyrolyzed rubber and crosslinking agent to form an integrated thermoplastic elastomer (ITPE) for asphalt modification. The mechanical, thermal, and interfacial behaviors of the ITPE were evaluated through tensile testing, thermogravimetric analysis, and scanning electron microscopy. The storage stability and rheological properties of the modified binder blends were evaluated through the cigar tube test and dynamic shear rheometer testing. Results demonstrated a successful formation of imide bonds in the ITPE, which can improve the strength, ductility, and thermal stability of rubber–plastic composites. Appropriate utilization of crosslinking agents can improve both rutting and fatigue resistance of ITPE-modified asphalt with good storage stability because of the co-existence of rigid plastic and soft rubbery regimes and the formation of a crosslink network. Furthermore, excessive content of crosslinker led to severe phase separation and reduced storage stability of modified binder blends. Extra crosslinker tended to float in asphalt because of its low density and caused an excessive formation of the crosslink network in the top section of the asphalt.

asphalt binder modifiers↗