SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This note presents closed-form solutions for axisymmetrical and axially unsymmetrical buckling of angle-ply laminated circular cylindrical shells under axial compression. The axisymmetrical and axially unsymmetrical buckling stress are found to be different from each other, and the best lamination angles which give the highest buckling stress are obtained.
Circular cylindrical shells with axisymmetric imperfections tested under axial compressive load, studying imperfection amplitude and wavelength effects on minimum buckling load
Prebuckling deformations effect on buckling of clamped thin walled circular cylindrical shells under axial loading and internal pressure
The development of a method to effect the automated minimum weight design of ring and stringer stiffened shells is presented. Membrane theory is used for the shell prebuckling analysis. The buckling analysis is based upon an arbitrary shell of revolution computer program. The structural analysis includes both buckling and yielding modes of failure. The synthesis involves the coupling of an exterior penalty function with a method for the unconstrained minimization of a function comprised of a sum of squares. Results of the application of the method to the design of the Viking Aeroshell cone are presented. The least weight Viking Aeroshell appears to be an all magnesium shell with ring stiffeners of hollow circular cross section. Because the method incorporates a general shell of revolution buckling analysis, it can be readily modified and applied to the design of any axisymmetrically loaded uniformly stiffened shell of revolution for which a membrane prebuckling solution exists.
Thin walled shells structural vibration, buckling and stress analysis by computer methods, discussing shell theory and design
In this study, a sub-scale advanced composite shell design is evaluated to determine its potential for use on a future aircraft fuselage. Two composite shells with the same nominal 8-ply [+/-45/+/-Theta](sub s) layup are evaluated, where Theta indicates a tow-steered ply. To build this shell, a fiber placement machine would be used to steer unidirectional prepreg tows as they are placed around the circumference of a 17-inch diameter right circular cylinder. The fiber orientation angle varies continuously from 10 degrees (with respect to the shell axis of revolution) at the crown, to 45 degrees on the side, and back to 10 degrees on the keel. All 24 tows are placed at each point on every fiber path in one structure designated as the shell with overlaps. The resulting pattern of tow overlaps causes the laminate thickness to vary between 8 and 16 plies. The second shell without tow overlaps uses the capability of the fiber placement machine to cut and add tows at any point along the fiber paths to fabricate a shell with a nearly uniform 8-ply laminate thickness. Issues encountered during the design and analysis of these shells are presented and discussed. Static stiffness and buckling loads of shells with tow-steered layups are compared with the performance of a baseline quasi-isotropic shell using both finite element analyses and classical strength of materials theory.
Characteristic buckling features of elongated cylindrical shell supported on inner surface by elastic foundation
Optimum design for buckling prevention in cylindrical shells under lateral pressure
Development of a numerical method, using the multistep integration approach, in which the buckling and vibration analyses are formulated as a succession of linear eigenvalue problems. The method does not require an estimate of the eigenvector, and once an eigenvalue has been converged good estimates for other eigenvalues are automatically available. This is accomplished through the use of an in-core Householder scheme for solution of the eigenvalue problem. Furthermore, since the method uses an eigenvalue solution, the possibility of missing modes is eliminated.
Edge constraint effect on buckling of sandwich and ring stiffened conical shells under external pressure
Results from a numerical and experimental study that illustrate the effects of laminate orthotropy on the buckling and failure response of compression-loaded composite cylindrical shells with a cutout are presented. The effects of orthotropy on the overall response of compression-loaded shells is described. In general, preliminary numerical results appear to accurately predict the buckling and failure characteristics of the shell considered herein. In particular, some of the shells exhibit stable post-local-buckling behavior accompanied by interlaminar material failures near the free edges of the cutout. In contrast another shell with a different laminate stacking sequence appears to exhibit catastrophic interlaminar material failure at the onset of local buckling near the cutout and this behavior correlates well with corresponding experimental results.
Results from a numerical and experimental study that illustrate the effects of selected cutout reinforcement configurations on the buckling and failure response of compression-loaded composite cylindrical shells with a cutout are presented. The effects of reinforcement size, thickness, and orthotropy on the overall response of compression-loaded shells are described. In general, reinforcement around a cutout in a compression-loaded shell can retard or eliminate the local buckling response and material failure near the cutout and increase the buckling load of the shell. However, some results show that certain reinforcement configurations can cause a significant increase in the local interlaminar failures that can accumulate near the free edges of a cutout during a local buckling event.
Bifurcation stresses and initial postbuckling behavior of both unstiffened and outside ring stiffened circular cylindrical shells under axial compression are analyzed. The shells are assumed to have axisymmetric sinusoidal imperfections with arbitrary wavelengths and amplitudes. It is found that for large imperfection amplitudes and wavelengths both the unstiffened and the stiffened shells have extremely small bifurcation loads. The postbuckling analysis shows that for small imperfection amplitudes the bifurcations from the axisymmetric state are initially unstable and collapse is associated with the bifurcation points. However, for larger values of the imperfection amplitudes the bifurcations are stable. For unstiffened shells the transition from unstable to stable bifurcations can take place at very small values of the load. On the other hand, for stiffened shells it is found that bifurcations at load levels less than about 40% of the classical buckling load have stable initial postbuckling behavior.
A sub-scale advanced composite shell design is evaluated to determine its potential for use on a future aircraft fuselage. Two composite shells with the same nominal 8-ply [?45/?]s layup are evaluated, where ? indicates a tow-steered ply. To build this shell, a fiber placement machine is used to steer unidirectional prepreg tows as they are placed around the circumference of a 17-inch diameter right circular cylinder. The fiber orientation angle varies continuously from 10 degrees (with respect to the shell axis of revolution) at the crown, to 45 degrees on the side, and back to 10 degrees on the keel. All 24 tows are placed at each point on every fiber path in one structure designated as the shell with overlaps. The resulting pattern of tow overlaps causes the laminate thickness to vary between 8 and 16 plies. The second shell without tow overlaps uses the capability of the fiber placement machine to cut and add tows at any point along the fiber paths to fabricate a shell with a nearly uniform 8-ply laminate thickness. Static stiffness and buckling loads of shells with tow-steered layups are compared with the performance of a baseline quasi-isotropic shell using both finite element analyses and classical strength of materials theory. These tailored, tow-steered shells were then were designed and built at the National Center for Advanced Manufacturing - Louisiana Partnership under a joint NASA-industry collaborative effort. The shells were fabricated from unidirectional IM7/8552 graphite-epoxy pre-preg slit tape material placed on a constant-diameter mandrel. An overview of the detailed design and manufacturing processes for these shells is presented, and issues encountered during their design, analysis, fabrication and post-cure evaluation are presented and discussed. Future plans for structural testing and analyses of the shells are also discussed.
A method to produce efficient piecewise uniform stiffened shells of revolution is presented. The approach uses a first order differential equation formulation for the shell prebuckling and buckling analyses and the necessary conditions for an optimum design are derived by a variational approach. A variety of local yielding and buckling constraints and the general buckling constraint are included in the design process. The local constraints are treated by means of an interior penalty function and the general buckling load is treated by means of an exterior penalty function. This allows the general buckling constraint to be included in the design process only when it is violated. The self-adjoint nature of the prebuckling and buckling formulations is used to reduce the computational effort. Results for four conical shells and one spherical shell are given.
A computationally effective method is described to evaluate the non-deterministic dynamic instability (probabilistic dynamic buckling) of thin composite shells. The method is a judicious combination of available computer codes for finite element, composite mechanics and probabilistic structural analysis. The solution method is incrementally updated Lagrangian. It is illustrated by applying it to thin composite cylindrical shell subjected to dynamic loads. Both deterministic and probabilistic buckling loads are evaluated to demonstrate the effectiveness of the method. A universal plot is obtained for the specific shell that can be used to approximate buckling loads for different load rates and different probability levels. Results from this plot show that the faster the rate, the higher the buckling load and the shorter the time. The lower the probability, the lower is the buckling load for a specific time. Probabilistic sensitivity results show that the ply thickness, the fiber volume ratio and the fiber longitudinal modulus, dynamic load and loading rate are the dominant uncertainties in that order.
Composite materials are increasingly being considered and used for launch-vehicle structures. For shell structures, such as interstages, skirts, and shrouds, honeycomb-core sandwich composites are often selected for their structural efficiency. Therefore, it is becoming increasingly important to understand the structural response, including buckling, of sandwich composite shell structures. Additionally, small geometric imperfections can significantly influence the buckling response, including considerably reducing the buckling load, of shell structures. Thus, both the response of the theoretically perfect structure and the buckling imperfection sensitivity must be considered during the design of such structures. To address the latter, empirically derived design factors, called buckling knockdown factors (KDFs), were developed by NASA in the 1960s to account for this buckling imperfection sensitivity during design. However, most of the test-article designs used in the development of these recommendations are not relevant to modern launch-vehicle constructions and material systems, and in particular, no composite test articles were considered. Herein, a two-part study on composite sandwich shells to (1) examine the relationship between the buckling knockdown factor and the areal mass of optimized designs, and (2) to interrogate the imperfection sensitivity of those optimized designs is presented. Four structures from recent NASA launch-vehicle development activities are considered. First, designs optimized for both strength and stability were generated for each of these structures using design optimization software and a range of buckling knockdown factors; it was found that the designed areal masses varied by between 6.1% and 19.6% over knockdown factors ranging from 0.6 to 0.9. Next, the buckling imperfection sensitivity of the optimized designs is explored using nonlinear finite-element analysis and the as-measured shape of a large-scale composite cylindrical shell. When compared with the current buckling design recommendations, the results suggest that the current recommendations are overly conservative and that the development of new recommendations could reduce the acreage areal mass of many composite sandwich shell designs by between 4% and 19%, depending on the structure.
A study of the buckling of thin shells was conducted using a digital computer program for the geometrically nonlinear analysis of arbitrarily loaded shells of revolution. The objective was an evaluation of the program's applicability to bifurcation buckling and imperfection sensitivity analysis. Clamped spherical caps under pressure loading and clamped truncated hemispheres under axial tension were investigated. Buckling loads were determined for axisymmetric and nearly axisymmetric loads and are compared with previously published analytical results based on geometric imperfections.