Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shell effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

In-line measurements of below-the-surface food deformation during drying with an interference-based optical fiber strain sensor

Real-time measurements of food deformation are important for quality control in drying, yet they pose significant challenges. In this study, we developed an interference-based optical fiber strain sensor to enable in-line, continuous, below-the-surface strain measurements in drying of soft food samples. Compared to a strain resolution of 8 × 10 -4 at zero strain and 7.2 × 10 -3 at 0.20 strain reported in our previously published work, the present study achieves markedly improved resolutions of 1.3 × 10 -4 at zero strain and 7.8 × 10 -4 at 0.25 strain, which strains are the lower and higher boundaries of the dynamic range, respectively. This nearly order-of-magnitude improvement is attributed to the unique interference-based sensing mechanism, no need for calibration to convert optical signals to strain, and the system-design-enabled immunity to fiber-disk misalignments and light source intensity fluctuations. To demonstrate the in-line process monitoring, deformation measurements of fresh banana slices and sugar cookie doughs were carried out in a benchtop oven and an industrial-scale hot-air pilot dryer, respectively. In both dryers, strain measurements were continuously measured during the whole drying process at various depths and radii below the sample surfaces, with the strains up to 25%. Computer vision was used only in the benchtop drying to confirm the faithfulness of the fiber sensor measurements and cannot provide below-the-surface measurements. The measured spatiotemporal deformation allowed us to confirm the shell-hardening effect and to determine the speed and location of large deformation changes in the whole drying process, the latter of which is related to the sample cracking. To the best of the authors’ knowledge, this study is the first to report on an interferometry-based fiber sensor to measure food deformation. This sensor and the sensing mechanism have high potential for real-time process monitoring and control to prevent over-drying or cracking during drying processes.

47 OTHER INSTRUMENTATION↗

On the curvature effect of a relativistic spherical shell

We consider a relativistic spherical shell and calculate its spectral flux as received by a distant observer. Using two different methods, we derive a simple analytical expression of the observed spectral flux and show that the well-known relation α-hat =2+ β-hat (between temporal index α-hat and spectral index β-hat ) of the high-latitude emission is naturally achieved in our derivation but holds only when the shell moves with a constant Lorentz factor Γ. Presenting numerical models in which the shell is undergoing acceleration or deceleration, we show that the simple α-hat =2+ β-hat relation does indeed deviate as long as Γ is not constant. For the models under acceleration, we find that the light curves produced purely by the high-latitude emission initially exhibit much steeper decay than in the constant Γ case and gradually resume the α-hat =2+ β-hat relation in about one and a half orders of magnitude in observer time. For the models under deceleration, the trend is opposite. The light curves made purely by the high-latitude emission initially exhibit a shallower decay than in the constant Γ case and gradually resume the relation α-hat =2+ β-hat in a similar order of magnitude in observer time. We also show that how fast the Lorentz factor Γ of the shell increases or decreases is the main ingredient determining the initial steepness or shallowness of the light curves.

79 ASTRONOMY AND ASTROPHYSICS↗

Valley Stoner instability of the composite Fermi sea

We study two-component electrons in the lowest Landau level at total filling factor ν T = 1/2 with anisotropic mass tensors and principal axes rotated by π/2 as realized in aluminum arsenide (AlAs) quantum wells. Combining exact diagonalization and the density matrix renormalization group we demonstrate that the system undergoes a quantum phase transition from a gapless state in which both flavors are equally populated to another gapless state in which all the electrons spontaneously polarize into a single flavor beyond a critical mass anisotropy of m x /m y ~7. We propose that this phase transition is a form of itinerant Stoner transition between a two-component and a single-component composite Fermi sea states and describe a set of trial wave functions which successfully capture the quantum numbers and shell filling effects in finite size systems as well as providing a physical picture for the energetics of these states. Our estimates indicate that the composite Fermi sea of AlAs is the analog of an itinerant Stoner magnet with a finite spontaneous valley polarization. Here, we pinpoint experimental evidence indicating the presence of Stoner magnetism in the Jain states surrounding ν = 1/2.

2-dimensional systems↗

Quantal diffusion approach for multinucleon transfers in Xe + Pb collisions

Employing a quantal diffusion description based on the stochastic mean-field approach in our work, we analyze the mass distribution of the primary fragments in the collisions of the Xe 136 + Pb 208 system at the bombarding energy E c.m. = 526 MeV. This quantal approach provides a good description of the primary fragment distribution without any adjustable parameter, including the effects of shell structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

In-Medium Similarity Renormalization Group For Nuclei

We present a new ab initio method that uses similarity renormalization group (SRG) techniques to continuously diagonalize nuclear many-body Hamiltonians. In contrast with applications of the SRG to two- and three-nucleon interactions in free space, we perform the SRG evolution ''in medium'' directly in the A-body system of interest. The in-medium approach has the advantage that one can approximately evolve 3,...,A-body operators using only two-body machinery based on normal-ordering techniques. The method is nonperturbative and can be tailored to problems ranging from the diagonalization of closed-shell nuclei to the construction of effective valence-shell Hamiltonians and operators. We present first results for the energies of {sup 4}He, {sup 16}O, and {sup 40}Ca, which have accuracies comparable to coupled-cluster calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Dynamics of Materials at Extreme Pressure

The original proposal defined two classes of work: (1) shock dynamics in materials at the MEC endsta9on at LCLS x-ray laser at SLAC, and (2) study of the effect of shell structure and ioniza9on on the equa9on of state of carbon up to 1 Gbar at the NIF laser at LLNL. Support was requested for a graduate student and postdoc. This work, plus addi9onal science in related areas, was accomplished. The effort was funded 9/15/17 – 9/14/22 (through a no-cost extension).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutrinoless Double-Beta Decay Investigations of 82Se Using Three Shell Model Hamiltonians

Neutrinoless double-beta decay is considered one of the most promising processes that would help clarify some of the symmetry-breaking problems in our understanding of the observable universe. Recent studies of neutrinoless double-beta decay matrix elements have employed statistical approaches based on modified shell model effective Hamiltonians for 48Ca (Phys. Rev. C 106, 054302 (2022)) and 136Xe (Phys. Rev. C 107, 045501 (2023)). The analyses rely on inducing perturbations in the starting effective Hamiltonians to observe the behavior of a wide range of observables, besides the 0νββ) NME, that are compared with experimental data. Following a Bayesian model averaging approach, the range of probable values for the neutrinoless double-beta decay matrix elements is presented. In this paper, we present a similar study for 82Se, which is described in the same model space as 76Ge that is under experimental observation. Due to its faster calculation time compared to 76Ge, 82Se can be used as an appropriate substitute in our complex statistical study. Using the calculations performed for the statistical analysis of the neutrinoless double-beta decay matrix elements, we also search for the correlations between the observables that we can compare to experimental data.

Science & Technology - Other Topics↗

Improved Statistical Analysis for the Neutrinoless Double-Beta Decay Matrix Element of 136Xe

Neutrinoless double beta decay nuclear matrix element (M0ν) for 136Xe was recently analyzed using a statistical approach (Phys. Rev. C 107, 045501 (2023)). In the analysis, three initial shell model effective Hamiltonians were randomly altered, and their results for 23 measured observables were used to infer credibility for the M0ν nuclear matrix element (NME) based on a Bayesian Model Averaging approach. In that analysis, a reasonable Gamow-Teller quenching factor of 0.7 was assumed for each starting effective Hamiltonian. Given that the result of the statistical analysis was sensible to this choice, we are here improving that analysis by assuming that the Gamow-Teller quenching factor is also randomly chosen within reasonabe limits for all three starting Hamiltonians. The outcomes are slightly higher expectation values and uncertainties for the M0ν NME.

Astronomy & Astrophysics↗

Synthesis of Fe{sub 3}O{sub 4}/SiO{sub 2}/Ag nanoparticles and its application in surface-enhanced Raman scattering

To obtain a recyclable surface-enhanced Raman scattering (SERS) material, we developed a composite of Fe{sub 3}O{sub 4}/SiO{sub 2}/Ag with core/shell/particles structure. The designed particles were synthesized via an ultrasonic route. The Raman scattering signal of Fe{sub 3}O{sub 4} could be shielded by increasing the thickness of the SiO{sub 2} layer to 60 nm. Dye rhodamine B (RB) was chosen as probe molecule to test the SERS effect of the synthesized Fe{sub 3}O{sub 4}/SiO{sub 2}/Ag particles. On the synthesized Fe{sub 3}O{sub 4}/SiO{sub 2}/Ag particles, the characteristic Raman bands of RB could be observed when the RB solution was diluted to 5 ppm (1x10{sup -5} M). Furthermore, the synthesized particles could keep their efficiency till four cycles. -- Graphical Abstract: Fe{sub 3}O{sub 4}/SiO{sub 2}/Ag particles, a recyclable surface-enhanced Raman scattering (SERS) material, were designed and synthesized via a simple ultrasonic route. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Impact of Ceramic Shell Strength on Hot Tearing during Investment Casting

The effect of ceramic shell strength on hot tearing susceptibility during solidification was inspected practicing investment casting of the cobalt-base superalloy samples with the same casting conditions, but different ceramic shell systems. Results showed that the lower the ceramic shell strength upon using polymer additives, the lower the hindered contraction rate, and the lower the hindered contraction rate, the smaller the hot tearing tendency. Optical microscopy and electron microscopy scanning revealed that the hot tear propagated along the last solidified interdendritic phase, and that the hot tear surface had two major modes: (1) the ductile region in the outer layer; and (2) the inner region of liquid embrittlement.

36 MATERIALS SCIENCE↗

Dense molecular clumps associated with the Large Magellanic Cloud supergiant shells LMC 4 and LMC 5

We investigate the effects of supergiant shells (SGSs) and their interaction on dense molecular clumps by observing the Large Magellanic Cloud (LMC) star-forming regions N48 and N49, which are located between two SGSs, LMC 4 and LMC 5. {sup 12}CO (J = 3-2, 1-0) and {sup 13}CO(J = 1-0) observations with the ASTE and Mopra telescopes have been carried out toward these regions. A clumpy distribution of dense molecular clumps is revealed with 7 pc spatial resolution. Large velocity gradient analysis shows that the molecular hydrogen densities (n(H{sub 2})) of the clumps are distributed from low to high density (10{sup 3}-10{sup 5} cm{sup –3}) and their kinetic temperatures (T {sub kin}) are typically high (greater than 50 K). These clumps seem to be in the early stages of star formation, as also indicated from the distribution of Hα, young stellar object candidates, and IR emission. We found that the N48 region is located in the high column density H I envelope at the interface of the two SGSs and the star formation is relatively evolved, whereas the N49 region is associated with LMC 5 alone and the star formation is quiet. The clumps in the N48 region typically show high n(H{sub 2}) and T {sub kin}, which are as dense and warm as the clumps in LMC massive cluster-forming areas (30 Dor, N159). These results suggest that the large-scale structure of the SGSs, especially the interaction of two SGSs, works efficiently on the formation of dense molecular clumps and stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of a redox-mediating ligand shell on photocatalysis by CdS quantum dots

Semiconductor quantum dots (QDs) are efficient organic photoredox catalysts due to their high extinction coefficients and easily tunable band edge potentials. Despite the majority of the surface being covered by ligands, our understanding of the effect of the ligand shell on organic photocatalysis is limited to steric effects. We hypothesize that we can increase the activity of QD photocatalysts by designing a ligand shell with targeted electronic properties, namely, redox-mediating ligands. Herein, we functionalize our QDs with hole-mediating ferrocene (Fc) derivative ligands and perform a reaction where the slow step is hole transfer from QD to substrate. Surprisingly, we find that a hole-shuttling Fc inhibits catalysis, but confers much greater stability to the catalyst by preventing a build-up of destructive holes. We also find that dynamically bound Fc ligands can promote catalysis by surface exchange and creation of a more permeable ligand shell. Finally, we find that trapping the electron on a ligand dramatically increases the rate of reaction. Furthermore, these results have major implications for understanding the rate-limiting processes for charge transfer from QDs and the role of the ligand shell in modulating it.

Chemistry↗

Evidence of exchange bias effect originating from the interaction between antiferromagnetic core and spin glass shell

Spin glass behavior and exchange bias effect have been observed in antiferromagnetic SrMn{sub 3}O{sub 6−x} nanoribbons synthesized via a self-sacrificing template process. The magnetic field dependence of thermoremanent magnetization and isothermal remanent magnetization shows that the sample is good correspondence to spin glass and diluted antiferromagnetic system for the applied field H < 2 T and H > 2 T, respectively. By detailed analysis of training effect using Binek's model, we argue that the observed exchange bias effect in SrMn{sub 3}O{sub 6−x} nanoribbons arises entirely from an interface exchange coupling between the antiferromagnetic core and spin glass shell. The present study is useful for understanding the nature of shell layer and the origin of exchange bias effect in other antiferromagnetic nanosystems as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low-lying magnetic excitations of doubly-closed-shell nuclei and nucleon-nucleon effective interactions

We have studied the low-lying magnetic spectra of {sup 12}C, {sup 16}O, {sup 40}Ca, {sup 48}Ca, and {sup 208}Pb nuclei within the random phase approximation (RPA) theory, finding that the description of low-lying magnetic states of doubly-closed-shell nuclei imposes severe constraints on the spin and tensor terms of the nucleon-nucleon effective interaction. We first used four phenomenological effective interactions, and we obtained good agreement with the experimental magnetic spectra and, to a lesser extent, with the electron scattering responses. Then we made self-consistent RPA calculations to test the validity of the finite-range Gogny D1 interaction. For all the nuclei under study, we found that this interaction inverts the energies of all the magnetic states forming isospin doublets.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Shell-model study of the N=82 isotonic chain with a realistic effective Hamiltonian

We have performed shell-model calculations for the even- and odd-mass N=82 isotones, focusing attention on low-energy states. The single-particle energies and effective two-body interaction both have been determined within the framework of the time-dependent degenerate linked-diagram perturbation theory, starting from a low-momentum interaction derived from the CD-Bonn nucleon-nucleon potential. In this way, no phenomenological input enters our effective Hamiltonian, whose reliability is evidenced by the good agreement between theory and experiment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New effective interaction for 0({Dirac_h}/2{pi}){omega} shell-model calculations in the sd-pf valence space

The neutron-rich isotopes with Z{<=}20, in particular those with neutron numbers around N=28, have been the focus of a lot experimental and theoretical scrutiny during the past few years. Shell-model calculations using the effective interaction SDPF-NR were able to predict or to explain most of the properties featured by these nuclei. Prominent among them is the disappearance of the N=28 shell closure for Z{<=}16. We have incorporated into SDPF-NR some modifications, either on purely theoretical grounds or guided by new experimental information. The proposed interaction SDPF-U offers enhanced reliability with respect to the earlier version.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Technical Note: Effect of explicit M and N-shell atomic transitions on a low-energy x-ray source

Purpose: In EGSnrc, atomic transitions to and from the M and N-shells are treated in an average way by default. This approach is justified in which the energy difference between explicit and average M and N-shell binding energies is less than 1 keV, and for most applications can be considered negligible. However, for simulations of low energy x-ray sources on thin, high-Z targets, characteristic x-rays can make up a significant portion of the source spectra. As of release V4-2.4.0, EGSnrc has included an option to enable a more complete algorithm of all atomic transitions available in the EADL compilation. In this paper, the effect of M and N-shell averaging on the calculation of half-value layer (HVL) and relative depth dose (RDD) curve of a 50 kVp intraoperative x-ray tube with a thin gold target was investigated. Methods: A 50 kVp miniature x-ray source with a gold target (The INTRABEAM System, Carl Zeiss, Germany) was modeled with the EGSnrc user code cavity, both with and without M and N-shell averaging. From photon fluence spectra simulations, the source HVLs were determined analytically. The same source model was then used with egs-chamber to calculate RDD curves in water. Results: A 4% increase of HVL was reported when accounting for explicit M and N-shell transitions, and up to a 9% decrease in local relative dose for normalization at 3 mm depth in water. Conclusions: The EGSnrc default of using averaged M and N-shell binding energies has an observable effect on the HVL and RDD of a low energy x-ray source with high-Z target. For accurate modeling of this class of devices, explicit atomic transitions should be included.

60 APPLIED LIFE SCIENCES↗