Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Highly efficient semi-hydrogenation in strained ultrathin PdCu shell and the atomic deciphering for the unlocking of activity-selectivity

Excellent ethylene selectivity in acetylene semi-hydrogenation is often obtained at the expense of activity. To break the activity-selectivity trade-off, precise control and in-depth understanding of the three-dimensional atomic structure of surfacial active sites are crucial. Here, we designed a novel Au@PdCu core–shell nanocatalyst featuring diluted and stretched Pd sites on the ultrathin shell (1.6 nm), which showed excellent reactivity and selectivity, with 100% acetylene conversion and 92.4% ethylene selectivity at 122 °C, and the corresponding activity was 3.3 times higher than that of the PdCu alloy. The atomic three-dimensional decoding for the activity-selectivity balance was revealed by combining pair distribution function (PDF) and reverse Monte Carlo simulation (RMC). The results demonstrate that a large number of active sites with a low coordination number of Pd–Pd pairs and an average 3.25% tensile strain are distributed on the surface of the nanocatalyst, which perform a pivotal function in the simultaneous improvement of hydrogenation activity and ethylene selectivity. Our work not only develops a novel strategy for unlocking the linear scaling relation in heterogeneous catalysis but also provides a paradigm for atomic 3D understanding of lattice strain in core–shell nanocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Turbulent dynamo action and its effects on the mixing at the convective boundary of an idealized oxygen-burning shell

Convection is one of the most important mixing processes in stellar interiors. Hydrodynamic mass entrainment can bring fresh fuel from neighboring stable layers into a convection zone, modifying the structure and evolution of the star. Because flows in stellar convection zones are highly turbulent, multidimensional hydrodynamic simulations are fundamental to accurately capture the physics of mixing processes. Under some conditions, strong magnetic fields can be sustained by the action of a turbulent dynamo, adding another layer of complexity and possibly altering the dynamics in the convection zone and at its boundaries. In this study, we used our fully compressible S EVEN -L EAGUE H YDRO code to run detailed and highly resolved three-dimensional magnetohydrodynamic simulations of turbulent convection, dynamo amplification, and convective boundary mixing in a simplified setup whose stratification is similar to that of an oxygen-burning shell in a star with an initial mass of 25 M ⊙ . We find that the random stretching of magnetic field lines by fluid motions in the inertial range of the turbulent spectrum (i.e., a small-scale dynamo) naturally amplifies the seed field by several orders of magnitude in a few convective turnover timescales. During the subsequent saturated regime, the magnetic-to-kinetic energy ratio inside the convective shell reaches values as high as 0.33, and the average magnetic field strength is ∼10 10 G. Such strong fields efficiently suppress shear instabilities, which feed the turbulent cascade of kinetic energy, on a wide range of spatial scales. The resulting convective flows are characterized by thread-like structures that extend over a large fraction of the convective shell. The reduced flow speeds and the presence of magnetic fields with strengths up to 60% of the equipartition value at the upper convective boundary diminish the rate of mass entrainment from the stable layer by ≈20% as compared to the purely hydrodynamic case.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Single and Double Shell Ignition Targets for the National Ignition Facility at 527 nm

Converting and using the National Ignition Facility (NIF) to deliver 527 nm light instead of its current 351 nm would allow the laser to deliver more energy and power to ignition targets. We update previous 527 nm target design work to reflect more contemporary target designs using high-density carbon capsules and low density helium gas filled Hohlraums. We extend single shell capsule designs based on current experimental results to higher energy and power and also explore double shell capsules, both driven by green light. These studies were completed using detailed pulse shapes found for targets that converged with acceptable 2D implosion symmetries and then used the Lava Lamp II code to confirm their feasibility at NIF. A 1.2× dimensional scaleup of one tuned NIF target at the limit of its current 351 nm capabilities and shot 170827 uses 3.3 MJ, at the limit of the current NIF's 527 nm capability. With the less-structured pulse of a double shell target, 3.7 MJ could be delivered by the laser. Our LPI calculations do not preclude operation at 527 nm, particularly for low fill Hohlraums, and suggest that the stimulated Raman backscatter may be no worse than the small quantities seen in 170827; stimulated forward Raman scattering may be present. If Stimulated Brillouin Scattering is too great, the much greater laser bandwidth available at 527 nm could be used to decrease backscatter. These larger targets with higher energy and power may offer a better chance of achieving ignition with only modest changes to the NIF laser.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Double cylinder target design for study of hydrodynamic instabilities in multi-shell ICF

Cylindrical implosions are used to study hydrodynamic instability growth for inertial confinement fusion (ICF) applications, as the cylindrical geometry allows for easier diagnostic access while retaining convergence effects. In this work, we use the established cylindrical implosion platform [Palaniyappan et al., Phys. Plasmas 27, 042708 (2020)] to inform the double shell ICF campaign [Montgomery et al., Phys. Plasmas 25, 092706 (2018)]. We present a design for a double cylindrical target as an analogue to the double shell ICF capsule in order to study hydrodynamic instability growth on the high-Z inner shell. Our design work is done with two-dimensional (2D) Eulerian radiation-hydrodynamics simulations, considering the axial uniformity of the implosion and feasibility of measuring the instability growth of pre-seeded single mode sinusoidal perturbations. We discuss in depth the design for a target to be directly driven at the OMEGA laser facility [Boehly et al., Opt. Commun. 133, 495 (1997)]. We evaluate the design for axial implosion symmetry and visibility of instability growth using synthetic radiographs constructed from the simulations, as the instability growth on the inner cylinder is experimentally measured using x-ray radiography of the implosion. We find that the seeded perturbation growth on the inner cylinder should be visible in an experiment, even with axial implosion asymmetry and preheat. We compare our 2D simulations with linear theory predictions for perturbation growth and show that a cylinder with lower azimuthal mode number (mode-20) perturbations compares more favorably with linear theory, while a cylinder with higher azimuthal mode number (mode-40) perturbations at the same starting amplitude saturates and is over-predicted by linear theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A model for K-shell x-ray yield from magnetic implosions at Sandia's Z machine

A zero-dimensional magnetic implosion model with a coupled equivalent circuit for the description of an imploding nested wire array or gas puff is presented. Circuit model results have been compared with data from imploding stainless steel wire arrays, and good agreement has been found. The total energy coupled to the load, Ej×B, has been applied to a simple semi-analytic K-shell yield model, and excellent agreement with previously reported K-shell yields across all wire array and gas puff platforms is seen. Trade space studies in implosion radius and mass have found that most platforms operate near the predicted maximum yield. In some cases, the K-shell yield may be increased by increasing the mass or radius of the imploding array or gas puff.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

A comparison of past and present computational methods for shape analysis of double-shell x-ray radiographs

Implosion symmetry is a key requirement in achieving a robust burning plasma in inertial confinement fusion experiments. In double-shell capsule implosions, we are interested in the shape of the inner shell as it pushes on the fuel. Shape analysis is a popular technique for studying said symmetry during implosion. Combinations of filtering and contour-finding algorithms are studied for their promise in reliably recovering Legendre shape coefficients from synthetic radiographs of double-shell capsules with applied levels of noise. A radial lineout max(slope) method when used on an image pre-filtered with non-local means and a variant of the marching squares algorithm are able to recover p 0 , p 2 , and p 4 maxslope Legendre shape coefficients with mean pixel discrepancy errors of 2.81 and 3.06, respectively, for the noisy synthetic radiographs we consider. Here, this improves upon prior radial lineout methods paired with Gaussian filtering, which we show to be unreliable and whose performance is dependent on input parameters that are difficult to estimate.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

The Grassmann interpolation method for spin-unrestricted open-shell systems

The recently reported Grassmann interpolation (G-Int) method [J. A. Tan and K. U. Lao, J. Chem. Phys. 158, 051101 (2023)] has been extended to spin-unrestricted open-shell systems. In contrast to closed-shell systems, where G-Int has to be performed only once since the α and β density matrices are the same, spin-unrestricted open-shell systems require G-Int to be performed twice—one for the α spin and another for the β spin density matrix. In this work, we tested the performance of G-Int to the carbon monoxide radical cation CO●+ and nickelocene complex, which have the doublet and triple ground states, respectively. We found that the Frobenius norm errors associated with the interpolations for the α and β spin density matrices are comparable for a given molecular geometry. These G-Int density matrices, when used as an initial guess for a self-consistent field (SCF) calculation, outperform the conventional SCF guess schemes, such as the superposition of atomic densities, purified superposition of atomic densities, core Hamiltonian, and generalized Wolfsberg–Helmholtz approximation. Depending on the desired accuracy, these G-Int density matrices can be used to directly evaluate the SCF energy without performing SCF iterations. In addition, the spin-unrestricted G-Int density matrices have been used for the first time to directly calculate the atomic charges using the Mulliken and ChElPG population analysis.

Chemistry↗
DOE OSTI2025

Reaction-in-flight neutrons as a diagnostic for hydrodynamical mixing in double shell inertial confinement fusion capsules

We examine reaction-in-flight (RIF) neutrons as diagnostics for hydrodynamical mixing of high-Z shell material into the hotspot of double shell capsules that are designed for the National Ignition Facility. In particular, we consider the effects of different levels of mixing of tungsten shell material into the DT gas on RIF spectra. Using a set of 1D simulations from the radiation hydrodynamic code xRAGE to determine the temperature and density profiles of the mixed W-DT gas, we find that increasing the mass of mix systematically reduces the ratio of RIF neutrons to primary 14 MeV neutrons. The shape of the RIF spectrum also changes with mix, with the predicted spectrum softening in energy with increasing mix.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Chemically controlled pattern formation in self-oscillating elastic shells

Significance Mechanochemical processes drive various biological functions including morphogenesis and morphological changes in responsive synthetic hydrogels. By allowing reactive components to function in an elastic closed shell, autonomous chemical reactions generate microcompartments capable of expanding or contracting or induce buckled patterns. This capability can drive specific functions such as enhancing the rate of diffusion of compartmentalized chemicals or releasing cargos at specific rates. Here, we demonstrate the coupling of mechanical response to autonomous chemical reactions in elastic shells which swell and deswell to generate specific dynamic patterns and morphologies. The reverse feedback from the mechanical input triggers the chemical reaction. Our work inspires the design of responsive shells to enhance the functionality of microcompartments and nanoreactors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Measurements of inner-shell excited levels of Na-, Mg-, and Al-like europium on the LLNL EBIT

We report on a measurement of several n = 3 → n = 2 inner-shell transitions in sodiumlike, magnesiumlike, and aluminumlike europium, performed at the EBIT-I electron beam ion trap facility at the Lawrence Livermore National Laboratory using an x-ray calorimeter. Although the inner-shell x-ray lines of such M-shell ions are typically dominated by electric dipole allowed transitions, we have also identified a weak feature that appears to be the result of electric quadrupole decay in sodiumlike Eu 52+ . Here, we compare the measured transitions energies to the calculated values obtained using the flexible atomic code. We find agreement in most cases within 2 eV or better.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Magnetic properties of γ-Fe 2 O 3 nanoparticles in a porous SiO 2 shell for drug delivery

A method is presented for synthesizing core–shell nanoparticles with a magnetic core and a porous shell suitable for drug delivery and other medical applications. The core contains multiple γ -Fe 2 O 3 nanoparticles (~15 nm) enclosed in a SiO 2 (~100–200 nm) matrix using either methyl (denoted TMOS- γ -Fe 2 O 3 ) or ethyl (TEOS- γ -Fe 2 O 3 ) template groups. Low-temperature Mössbauer spectroscopy showed that the magnetic nanoparticles have the maghemite structure, γ -Fe 2 O 3 , with all the vacancies in the octahedral sites. Saturation magnetization measurements revealed that the density of γ -Fe 2 O 3 was greater in the TMOS- γ -Fe 2 O 3 nanoparticles than TEOS- γ -Fe 2 O 3 nanoparticles, presumably because of the smaller methyl group. Magnetization measurements showed that the blocking temperature is around room temperature for the TMOS- γ -Fe 2 O 3 and around 250 K for the TEOS- γ -Fe 2 O 3 . Three dimensional topography analysis shows clearly that the magnetic nanoparticles are not only at the surface but have penetrated deep in the silica to form the core–shell structure.

Physics↗
DOE OSTI2021

Symmetrically tuned large-volume conic shell-cavities for axion searches

In an earlier paper [1], a new class of thin-shell cavities were proposed to evade the steep frequency scaling of conventional axion haloscopes. In this follow-up work, we see that a generalized conic geometry enables robust frequency-tuning for these large-volume cm-wave cavities. The frequency-defining dimension of a conic shell-cavity changes symmetrically and uniformly during tuning, maintaining a high axion coupling efficiency (the "form factor") to an external solenoid field. It is further shown that such tunable geometry is not restricted to circular cones. A general prescription for arbitrary volume-filling conic shell-cavities is developed and direct solutions are obtained for the created numerical models. Additionally, the largest of the realized designs is a meandering "brain" cavity that is tunable over a frequency range of 20%. The scan rate of this cavity is three orders of magnitude larger than that of a scaled cylindrical cavity used in the current generation experiments. The prospects for such a large improvement in the scan rate should motivate R& D efforts in fabrication and other implementation techniques. If these engineering challenges can be met, cavity-based axion haloscopes can stay competitive at frequencies higher than a few GHz. We propose an experimental configuration at 20 GHz (~80 μeV) using an array of brain cavities and compare it with other proposals for similar frequencies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Interpretive MHD modeling of dispersive shell pellet injection for rapid shutdown in tokamaks

Dispersive shell pellet (DSP) injection is modeled with the extended-MHD code NIMROD for interpretive insight into the results of recent DIII-D DSP experiments and to explore the dynamics of an inside-out thermal quench for disruption mitigation in tokamaks. Simulations of the pre-thermal quench (TQ) phase indicate that the upper bound for the quantity of ablated carbon shell material that will not perturb the flux surfaces is in the ballpark of, but somewhat below the experimental quantity. Even below this quantity, sufficient electrons are added to the plasma by the shell material to produce significant dilution cooling before the TQ is triggered. Simulations carried through the end of the TQ have very large amplitude MHD fluctuations (δB/B>10 -2 ) at the time of the plasma current spike associated with current profile redistribution. Finally, after the plasma current spike, which is of comparable amplitude to that measured in DIII-D experiments, none of the runaway electron test-particles whose orbits are tracked throughout the simulation remain confined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Universal Effective Charges in the 𝑠⁢𝑑 and 𝑓⁡𝑝 Shells

The 247-keV state in 54 Sc, populated in the 𝛽 decay of 54 Ca, is reported here as a nanosecond isomer with a half-life of 26.0(22) ns. The state is interpreted as the 1 + member of the 𝜋⁢𝑓 7/2 ⊗ 𝜈⁢𝑓 5/2 spin-coupled multiplet, which decays to the 3 + ,𝜋⁢𝑓 7/2 ⊗ 𝜈⁢𝑝 1/2 ground state. The new half-life corresponds to a pure 𝐸⁢2 transition with a strength of 1.93(16) W.u., providing the most precise, unambiguous 𝐵⁡(𝐸⁢2) value in the neutron-rich 𝑓⁡𝑝 region to date for a nucleus with valence protons above 𝑍 = 20. Notably, it is roughly 4 times larger than the 𝐵⁡(𝐸⁢2;1/2 − → 5/2 − ) value in 55 Ca. The results, as compared to semiempirical and ab initio shell-model calculations, indicate (1) a weak 𝑁 = 34 subshell gap relative to 𝑁 = 32, (2) a large 𝐸⁢2 enhancement in Sc as compared to Ca due to 1⁢𝑝 − 1⁢ℎ proton excitations across 𝑍 = 28, and (3) empirical effective proton and neutron charges 𝑒 𝜋 = 1.30⁢(8)⁢𝑒 and 𝑒 𝜈 = 0.452⁢(7)⁢𝑒, respectively, that are in contrast to reports of 𝑒 𝜋 ≈1.1–1.15⁢𝑒 and 𝑒 𝜈 ≈ 0.6–0.8⁢𝑒 for 𝑓⁡𝑝-shell nuclei near 𝑁 = 𝑍. Here, we demonstrate that these reports are erroneous and that, in fact, a universal set of effective charges can be used across the 𝑠⁢𝑑 and 𝑓⁡𝑝 shells.

Beta decay↗
DOE OSTI2025

Advancing quantum simulations of the nuclear shell model with Gray-code–based resource-efficient protocols

Background: Some of the computational limitations in solving the nuclear many-body problem could be overcome by utilizing quantum computers. The nuclear shell-model calculations providing deeper insights into the properties of atomic nuclei are one such case with high demand for resources, as the size of the Hilbert space grows exponentially with the number of particles involved. Quantum algorithms are being developed to overcome these challenges and advance such calculations. Purpose: To develop quantum circuits for the nuclear shell-model, leveraging the capabilities of noisy intermediate-scale quantum (NISQ) devices. Here, we aim to minimize resource requirements (specifically in terms of qubits and gates) and strive to reduce the impact of noise by employing relevant mitigation techniques. Methods: We achieve noise resilience by designing an optimized Ansatz for the variational quantum eigensolver (VQE) based on Givens rotations and incorporating qubit-ADAPT-VQE in combination with variational quantum deflation (VQD) to compute ground and excited states, incorporating the zero-noise extrapolation mitigation technique. Furthermore, the qubit requirements are significantly reduced by mapping the basis states to qubits using Gray-code encoding and generalizing transformations of fermionic operators to efficiently represent many-body states. Results: By employing the resource-efficient protocols, we achieve the ground and excited state energy levels of 38 Ar and 6 Li with better accuracy. These energy levels are presented for noiseless simulations, noisy conditions, and after applying noise mitigation techniques. Results are compared for Jordan-Wigner and Gray-code encoding using VQE, qubit-ADAPT-VQE, and VQD. Conclusions: Our work highlights the potential of resource-efficient protocols to leverage the full potential of NISQ devices in scaling the nuclear shell model calculations, offering a pathway toward more complex quantum simulations in nuclear physics. This approach establishes a framework for studying other nuclear systems with improved quantum resource efficiency, marking a significant advancement in applying quantum computing to realistic nuclear physics applications.

Physics - Nuclear physics and radiation physics↗
DOE OSTI2025

Impact of super-Gaussian electron distributions on plasma K-shell emission

Electron distributions in laser-produced plasmas will be driven toward a super-Gaussian distribution due to inverse bremsstrahlung absorption [Langdon, Phys. Rev. Lett. 44, 575 (1980)]. Both theoretical and experimental evidence suggest that fundamental plasma properties are altered by the super-Gaussian distribution. Here, this paper examines how the super-Gaussian distribution affects the ionization balance and K-shell emission of atomic plasmas, utilizing approximate formulas and detailed collisional-radiative simulations. While the impact on plasma ionization is small, K-shell spectra can be significantly modified. Based on these findings, we demonstrate that K-shell spectroscopy can be used to infer super-Gaussian or other similar nonequilibrium electron distributions.

Atomic spectra↗
DOE OSTI2026

Probing the 𝑗 dependence of angular distributions and 𝑁=20 shell rigidity via the 36 S (𝑝,𝑑) 35 S reaction

An investigation of the N=20 36 S nucleus has been performed through a detailed study of the 3 6S (p,d)3 5S neutron-removal reaction, employing a 66-MeV proton beam at iThemba Laboratory for Accelerator Based Sciences and an innovative target design. Using the high-resolution K = 600 magnetic spectrometer, 98 states in 3 5S were identified up to 16-MeV excitation energy, including 47 previously unobserved states. Angular distributions and spectroscopic factors, including isobaric analog-state contributions, were extracted for 81 levels. A pronounced j dependence in the angular distributions of ℓ=2 states provides refined insights into the spin-orbit splitting. Finite-range adiabatic distorted-wave approximation calculations qualitatively reproduce the observed j dependence. Comparisons of the measured 1d 5/2 spectroscopic strength distribution with large-scale shell-model and ab initio calculations show good agreement overall, and the robustness of the N=20 shell closure in 36 S is confirmed when comparing the relatively low fp orbital occupancies in 40 Ca and 3 6S across the Fermi surface. This study underscores the utility of neutron-removal reactions in probing nuclear structure and the Fermi surface of sd nuclei and beyond. The findings advance our understanding of shell evolution and offer constraining data for theoretical models.

20 ≤ A ≤ 38↗
DOE OSTI2020

Dynamically generated momentum space shell structure of quarkyonic matter via an excluded volume model

The phase-space structure of zero-temperature quarkyonic matter is a Fermi sphere of quark matter surrounded by a shell of nucleonic matter. Here, we construct a quasiparticle model of quarkyonic matter based on the constituent quark model, where the quark and nucleon masses are related by $m_Q = m_N/N_c$, and $N_c$ is the number of quark colors. The region of occupied states is for quarks $k_Q < k_F/N_c$ and for nucleons $k_F < k_N < k_F + Δ$. We first consider the general problem of quarkyonic matter with hard-core nucleon interactions. We then specialize to a quasiparticle model where the hard-core nucleon interactions are accounted for by an excluded volume. In this model, we show that the nucleonic shell forms past some critical density related to the hard-core size and for large densities becomes a thin shell. We explore the basic features of such a model and argue this model has the semiquantitative behavior needed to describe neutron stars.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗