Search NASA⌕ Search

SEARCH · Search NASA

Results for “Space Tethers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Shuttle tethered satellite program

Features and applications of the Shuttle tethered satellite system (TSS) are outlined. The TSS would be mounted on a normal cargo pallet and used to deploy or retrieve payloads weighing up to 500 kg from the Orbiter by reeling in or unreeling a tether line extended along the gravity gradient vertical. Attaching a conducting wire to the tether would permit electrodynamic measurements of space plasma. An initial mission under development is to deploy an instruments package 20 km above the Orbiter with a conducting wire tether, thereby obtaining data on low frequency hydromagnetic waves generated by tether passage through the space plasma. An aerodynamics package could also be lowered to 130 km, where measurements can be made with magnetometers for geoscience data, atmospheric composition, and cosmic dust can be collected. Details of engineering assignments for the TSS divided up between NASA and the Italian National Research Council are discussed.

Nolan, M. B.↗
NASA NTRS2005

Critical Technologies for the Development of Future Space Elevator Systems

A space elevator is a tether structure extending through geosynchronous earth orbit (GEO) to the surface of the earth. Its center of mass is in GEO such that it orbits the earth in sync with the earth s rotation. In 2004 and 2005, the NASA Marshall Space Flight Center and the Institute for Scientific Research, Inc. worked under a cooperative agreement to research the feasibility of space elevator systems, and to advance the critical technologies required for the future development of space elevators for earth to orbit transportation. The discovery of carbon nanotubes in the early 1990's was the first indication that it might be possible to develop materials strong enough to make space elevator construction feasible. This report presents an overview of some of the latest NASA sponsored research on space elevator design, and the systems and materials that will be required to make space elevator construction possible. In conclusion, the most critical technology for earth-based space elevators is the successful development of ultra high strength carbon nanotube reinforced composites for ribbon construction in the 1OOGPa range. In addition, many intermediate technology goals and demonstration missions for the space elevator can provide significant advancements to other spaceflight and terrestrial applications.

Smitherman, David V., Jr.↗
NASA NTRS1996

ISSA/TSS power preliminary design

A projected power shortfall during the initial utilization flights of the International Space Station Alpha (ISSA) has prompted an inquiry into the use of the Tethered Satellite System (TSS) to provide station power. The preliminary design of the combined ISSA/TSS system is currently underway in the Preliminary Design Office at the Marshall Space Flight Center. This document focuses on the justification for using a tether system on space station, the physical principles behind such a system, and how it might be operated to best utilize its capabilities. The basic components of a simple DC generator are a magnet of some type and a conductive wire. Moving the wire through the magnetic field causes forces to be applied to the electric charges in the conductor, and thus current is induced to flow. This simple concept is the idea behind generating power with space-borne tether systems. The function of the magnet is performed by the earth's magnetic field, and orbiting a conductive tether about the earth effectively moves the tether through the field.

Main, John A.↗
NASA NTRS1985

Summary presentation to the Artificial Gravity Panel

General requirements for artificial gravity under a wide range of circumstances are considered. Appropriate or feasible ways of filling these requirements are explored with the focus on using tethers. The orbiter itself does not appear to be a good platform for tether research and development. Therefore, tethers that would be attached to space stations are emphasized. However, orbiter demonstrations and external tank demonstrations might be useful in exploring and developing tether operations prior to the space station. The general recommendations include requirements of artificial gravity in medicine and physiology, technology, microgravity sciences, habitability, operations in space, and what artificial gravity would mean to operations in space.

Butler, G.↗
NASA NTRS1989

Dynamics and control of the tether elevator/crawler system

This paper investigates the dynamics and acceleration levels of a new tethered system for micro- and variable-gravity applications. The system consists of two platforms tethered on opposite sides to the Space Station. A fourth platform, the elevator, is placed in between the Space Station and the upper platform. Variable-g levels on board the elevator are obtained by moving this facility along the upper tether, while microgravity experiments are carried out on board the Space Station. By controlling the length of the lower tether the position of the system center of mass can be maintained on board the Space Station despite variations of the system's distribution of mass. The paper illustrates the mathematical model, the environmental perturbations and the control techniques which have been adopted for the simulation and control of the system dynamics. Two sets of results from two different simulation runs are shown. The first set shows the system dynamics and the acceleration spectra on board the Space Station and the elevator during station-keeping. The second set of results demonstrates the capability of the elevator to attain a preselected g-level.

Lorenzini, E. C.↗
NASA NTRS1985

Transportation Applications, Part 1

The applications of tethers in support of space transportation is divided into: (1) orbit transfer, momentum transfer release/rendezvous (hanging, swinging, and spinning) and simplified docking; (2) orbit maintenance: electrodynamic thrust in or out of plane, electrodynamic libration pumping or damping, momentum scavenging, and isolate thruster exhaust; and (3) transfer within constellation: deployment or retrieval of whole constellation, clothesline loop, hoist, tram for travel on the tether, monkey between the tethers, and power and fluid transfer.

Carroll, J.↗
NASA NTRS1988

Tether as a dynamic transmission line

The effect of longitudinal impulses on a satellite when a continuum tether from the Shuttle or Space Station is included is investigated. It is demonstrated that, taking the continuum nature of the tether into account, the sharp onset of a forcing impulse at the Shuttle end is perceived on board the satellite. The magnitude of the satellite response is diminished from that of the forcing impulse, and the response exhibits a broadened exponential tailoff. These are due primarily to the coupling between the tether and the satellite and its influence on an impinging impulsive wave, and not on the whole system as in the spring-mass model. The full impulse response function can be quite complex, showing repeated impulses as the tether wave bounces back and forth between the satellite and Shuttle, and having a different shape at each impingement on the satellite.

Gullahorn, Gordon E.↗
NASA NTRS2001

Conceptual Design and Analysis of an MXER Tether Boost Station

Momentum-exchange / electrodynamic reboost (MXER) tether systems show great promise for use in propellantless orbital transfer. Work conducted at MSFC (Marshall Space Flight Center) and TUI (Tethers Unlimited, Inc.) over the last two years has updated and refined a tether conceptual design that could be used to boost payloads from LEO (Low Earth Orbit) to GTO (Geostationary Transfer Orbit) or on a trans-lunar trajectory. Efficient configurations have been created that can be packaged, assembled, deployed, and maintained, improving their operational potential and flexibility.

Sorensen, Kirk↗
NASA NTRS2002

Orbital Propagation of Momentum Exchange Tether Systems

An advanced concept in in-space transportation currently being studied is the Momentum-Exchange/Electrodynamic Reboost Tether System (MXER). The system acts as a large momentum wheel, imparting a Av to a payload in low earth orbit (LEO) at the expense of its own orbital energy. After throwing a payload, the system reboosts itself using an electrodynamic tether to push against Earth's magnetic field and brings itself back up to an operational orbit to prepare for the next payload. The ability to reboost itself allows for continued reuse of the system without the expenditure of propellants. Considering the cost of lifting propellant from the ,ground to LEO to do the same Av boost at $10000 per pound, the system cuts the launch cost of the payload dramatically, and subsequently, the MXER system pays for itself after a small number of missions.1 One of the technical hurdles to be overcome with the MXER concept is the rendezvous maneuver. The rendezvous window for the capture of the payload is on the order of a few seconds, as opposed to traditional docking maneuvers, which can take as long ets necessary to complete a precise docking. The payload, therefore, must be able to match its orbit to meet up with the capture device on the end of the tether at a specific time and location in the future. In order to be able to determine that location, the MXER system must be numerically propagated forward in time to predict where the capture device will be at that instant. It should be kept in mind that the propagation computation must be done faster than real-time. This study focuses on the efforts to find and/or build the tools necessary to numerically propagate the motion of the MXER system as accurately as possible.

John Westerhoff↗
NASA NTRS2000

Propulsive Small Expendable Deployer System (ProSEDS)

The Propulsive Small Expendable Deployer System (ProSEDS) space experiment will demonstrate the use of an electrodynamic tether propulsion system to generate thrust in space by decreasing the orbital altitude of a Delta II Expendable Launch Vehicle (ELV) second stage. ProSEDS, which is planned to fly in 2001, will use the flight proven Small Expendable Deployer System (SEDS) to deploy a tether (5km bare wire plus 10 km spectra or dyneema) from a Delta II second stage to achieve approximately 0.4N drag thrust. ProSEDS will utilize the tether-generated current to provide limited spacecraft power. The ProSEDs instrumentation includes a Langmuir probe and Differential Ion Flux Probe, which will determine the characteristics of the ambient ionospheric plasma. Two Global Positioning System (GPS) receivers will be used (one on the Delta and one on the endmass) to help determine tether dynamics and to limit transmitter operations to occasions when the spacecraft is over selected ground stations, The flight experiment is a precursor to the more ambitious electrodynamic tether upper stage demonstration mission, which will be capable of orbit raising, lowering and inclination changes-all using electrodynamic thrust. An immediate application of ProSEDS technology is for the deorbit of spent satellites for orbital debris mitigation. In addition to the use of this technology to provide orbit transfer and debris mitigation it may also be an attractive option for future missions to Jupiter and any other planetary body with a magnetosphere.

Ballance, Judy↗
NASA NTRS2002

Propulsive Small Expendable Deployer System (ProSEDS)

The Propulsive Small Expendable Deployer System (ProSEDS) space experiment will demonstrate the use of an electrodynamic tether propulsion system to generate thrust in space by decreasing the orbital altitude of a Delta 11 Expendable Launch Vehicle second stage. ProSEDS, which is planned on an Air Force GPS Satellite replacement mission in June 2002, will use the flight proven Small Expendable Deployer System (SEDS) to deploy a tether (5 km bare wire plus 10 km non-conducting Dyneema) from a Delta 11 second stage to achieve approx. 0.4N drag thrust. ProSEDS will utilize the tether-generated current to provide limited spacecraft power. The ProSEDS instrumentation includes Langmuir probes and Differential Ion Flux Probes, which will determine the characteristics of the ambient ionospheric plasma. Two Global Positioning System (GPS) receivers will be used (one on the Delta and one on the endmass) to help determine tether dynamics and to limit transmitter operations to occasions when the spacecraft is over selected ground stations. The flight experiment is a precursor to the more ambitious electrodynamic tether upper stage demonstration mission, which will be capable of orbit raising, lowering and inclination changes-all using electrodynamic thrust. An immediate application of ProSEDS technology is for the removal of spent satellites for orbital debris mitigation. In addition to the use of this technology to provide orbit transfer and debris mitigation it may also be an attractive option for future missions to Jupiter and any other planetary body with a magnetosphere.

Curtis, Leslie↗
NASA NTRS1993

Tethering a new technology

In a tethered-satellite system, two satellites travelling in different orbits are forced to circle the earth in the same time period. The lower satellite is dragged by the tether to a higher orbital speed, while the upper one tends to move higher. This generates a tension which maintains the system in a stable configuration; the tether is aligned with a radius projecting outward from the earth's center. Such a system has been demonstrated by the TSS-1 tethered satellite carried by the Space Shuttle's STS-46 mission. The dynamic and the electrodynamic behavior of the system at long tether lengths were not, however, evaluated due to system malfunctions.

Stone, Nobie H.↗
NASA NTRS1982

Study of certain tether safety issues. Continuation of investigation of electrodynamic stabilization and control of long orbiting tethers, volume 1

The behavior of long tethers (10-100 km) in space are addressed under two failure situations with potential safety impact: instantaneous jamming of the reel controlling the tether during deployment and cutting of the tether due to a meteor strike or other similar phenomena. Dual and multiple mass point models were used in the SAO SKYHOOK program to determine this behavior. The results of the program runs were verified analytically or by comparison with previously verified results. The study included the effects of tether damping and air drag where appropriate. Most runs were done with the tether system undamped since we believe this best represents the true behavior of the tether. Means for controlling undesirable behavior of the tether, such as viscous dampers in the subsatellite, were also studied.

Colombo, G.↗
NASA NTRS2005

Electrodynamic Tether as a Thruster for MXER Studies

Electrodynamic propulsion based on the interaction of a conducting tether with the background magnetic field can be implemented across a range of system designs. Bare tethers, bare and insulated tethers with a balloon termination, and insulated tethers with a grid-sphere termination have been proposed for different applications. Electrodynamic tether as a thruster is currently proposed for the Momentum exchange Electrodynamic Reboost (MXER) Tether System that currently under development at NASA Marshal Space Flight Center. The choice of a tether design for a specific mission is based on the analysis of tether system performance. Different parameters describing tether performance such as system acceleration and efficiency can be calculated if the current distribution along the tether at the satellite trajectory is known. The code calculating the tether current collection for the bare and partly insulated tethers with the circular (wire) and rectangular (tape) cross-sections operating in the thrust mode has been developed and applied for MXER that is expected to operate in an equatorial elliptical orbit with perigee in the altitude range of 300-500km and apogee between 5000-8000km. The collected current is calculated as a function of the satellite velocity and the Earth s magnetic field, plasma parameters (plasma density and temperature), and tether parameters (tether length, the length of the bare segment, the type and the dimensions of the cross-section). The deviation of the collected current from the OML model due to the tether thickness and self-induced magnetic field (for tether with a circular cross-section) is taken into account.

Khazanov, G. V.↗
NASA NTRS2006

2006 Status of the Momentum eXchange Electrodynamic Re-Boost (MXER) Tether Development

The MXER Tether technology development is a high-payoff/high-risk investment area within the NASA In-Space Propulsion Technology (ISPT) Program. The ISPT program is managed by the NASA Headquarters Science Mission Directorate and implemented by the Marshall Space Flight Center in Huntsville, Alabama. The MXER concept was identified and competitively ranked within NASA's comprehensive Integrated In-Space Transportation Plan (IISTP); an agency-wide technology assessment activity. The objective of the MXER tether project within ISPT is to advance the technological maturation level for the MXER system, and its subsystems, as well as other space and terrestrial tether applications. Recent hardware efforts have focused on the manufacturability of space-survivable high-strength tether material and coatings, high-current electrodynamic tether, lightweight catch mechanism, high-accuracy propagator/predictor code, and efficient electron collection/current generation. Significant technical progress has been achieved with modest ISPT funding to the extent that MXER has evolved to a well-characterized system with greater capability as the design has been matured. Synergistic efforts in high-current electrodynamic tethers and efficient electron collection/current generation have been made possible through SBIR and STTR support. The entire development endeavor was orchestrated as a collaborative team effort across multiple individual contracts and has established a solid technology resource base, which permits a wide variety of future space cable/tether applications to be realized.

Bonometti, Joseph A.↗
NASA NTRS1986

Low gravity facilities for space station planetology experiments

For experimentation, space offers a unique environment which is unobtainable on Earth. One characteristic is a gravity force less than 1 g, where g is the mean Earth gravity acceleration of 9.8 m/sq s. The production of uniform gravity levels above zero g in space is discussed in relationship to experimental needs. For planetology experiments, providing gravity in space will make it possible to more nearly simulate conditions on natural bodies. The g-level is but one parameter involved in the design of a specific experiment. Other requirements may be: g-level range; g-level tolerance value; Coriolis tolerance value; volume requirement; g-level duration; power and materials for the experiment; and automated or man-tended operation. These requirements, and certainly others, will dictate the type of facility which should be considered. The use of the Space Station or the Tethered Satellite System configurations is discussed.

Penzo, P. A.↗
NASA NTRS1987

Potential for on-orbit manufacture of large space structures using the pultrusion process

On-orbit manufacture of lightweight, high-strength, advanced-composite structures using the pultrusion process is proposed. This process is adaptable to a zero-gravity environment by using preimpregnated graphite-fiber reinforcement systems. The reinforcement material is preimpregnated with a high-performance thermoplastic resin at a ground station, is coiled on spools for compact storage, and is transported into Earth orbit. A pultrusion machine is installed in the Shuttle cargo bay from which very long lengths of the desired structure is fabricated on-orbit. Potential structural profiles include rods, angles, channels, hat sections, tubes, honeycomb-cored panels, and T, H, and I beams. A potential pultrudable thermoplastic/graphite composite material is presented as a model for determining the effect on Earth-to-orbit package density of an on-orbit manufacture, the package density is increased by 132 percent, and payload volume requirement is decreased by 56.3 percent. The fabrication method has the potential for on-orbit manufacture of structural members for space platforms, large space antennas, and long tethers.

Wilson, Maywood L.↗
NASA NTRS1987

Low-gravity facilities for Space Station planetology experiments

For experimentation, space offers an environment which is unobtainable on earth. One characteristic is a gravity force less than 1 g, where g is the mean earth gravity acceleration of 9.8 m/sq s. The production of uniform gravity levels above zero g in space is discussed in relationship to experimental needs. For planetology experiments, providing gravity in space will make it possible to more nearly simulate conditions on natural bodies. The g-level is but one parameter involved in the design of a specific experiment. Other requirements may be: g-level range; g-level tolerance value; Coriolis tolerance value; volume requirement g-level duration; power and materials for the experiment; and automated or man-tended operations. These requirements, and certainly others, will dictate the type of facility which should be considered. The use of the Space Station of the Tethered Satellite System configurations is discussed.

Penzo, Paul A.↗