Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1945

An Experimental Investigation of the Effect of Propellers Used as Aerodynamic Brakes on Stability and Control

Tests were made of a model representative of a single-engine tractor-type airplane for the purpose of determining the stability and control effects of a propeller used as an aerodynamic brake. The tests were made with single-and dual-rotation propellers to show the effect of type of propeller rotation, and with positive thrust to provide basic data with which to compare the effects of negative thrust. Four configurations of the model were used to give the effects of tilting the propeller thrust axis down 5 deg., raising the horizontal tail, and combining both tilt and raised tail. Results of the tests are reported herein. The effects of negative thrust were found to be significant. The longitudinal stability was increased because of the loss of wing lift and increase of the angle of attack of the tail. Directional stability and both longitudinal and directional control were decreased because of the reduced velocity at the tail. These effects are moderate for moderate braking but become pronounced with full-power braking, particularly at high values of lift coefficient. The effects of model configuration changes were small when compared with the over-all effects of negative-thrust operation; however, improved stability and control characteristics were exhibited by the model with the tilted thrust axis. Raising the horizontal tail improved the longitudinal characteristics, but was detrimental to directional characteristics. The use of dual-rotation propeller reduced the directional trim charges resulting from the braking operation. A prototype airplane was assumed and handling qualities were computed and analyzed for normal (positive thrust) and braking operation with full and partial power. The results of these analyses are presented for the longitudinal characteristics in steady and accelerated flight, and for the directional characteristics in high- and low-speed flight. It was found that by limiting the power output of the engine (assuming the constant-speed propeller will function in the range of blade angles required for negative thrust) the stability and control characteristics may be held within the limits required for safe operation. Braking with full power, particularly at low speeds, is dangerous, but braking with very small power output is satisfactory from the standpoint of control. The amount of braking produced with zero power output is equal to or better than that produced by conventional spoiler-type brakes.

AIRPLANES, MILITARY↗
NASA NTRS2005

A formulation of stability for spacecraft formations

A formulation of stability for a set of spacecraft in formation flight is presented. First, a formation is defined in a precise mathematical form in terms of control interactions. Then, stability is formulated based on input-to-output stability with respect to a partitioning of the formation dynamics. This formulation of stability is shown to be useful in characterizing disturbance propagation in the formation as a function of the partition interconnection topology, and also in analyzing the robustness of sensing, communication, and control topologies. Stability results are presented for hierarchical, cyclic, and disturbance attenuating formations.

formation flyer↗
NASA NTRS1958

Investigation of Control Effectiveness and Stability Characteristics of a Model of a Low-Wing Missile with Interdigitated Tail Surfaces at Mach Numbers of 2.29, 2.97, and 3.51

A brief investigation of the longitudinal stability and control effectiveness at supersonic speeds of a model of a low-wing missile with interdigitated tail surfaces was made in the Langley Unitary Plan wind tunnel. The data were obtained at Mach numbers M of 2.29, 2.97, and 3.51 for Reynolds number (based on the mean geometric chord of the wing) of 1.15 x 10(exp 6), 1.14 x 10(exp 6), and 1.11 x 10(exp 6), respectively. Data were obtained for three settings of the longitudinal control surfaces: with deflection of all surfaces, with deflection of the lower surfaces only, and with all surfaces undeflected. Directional stability data were obtained at M=3.51 for angles of attack of approximately 0 deg and 10 deg. These data, with summary data and typical schlieren photographs, are presented with only a brief analysis. The data indicate that the controls are effective throughout the Mach number range and lift-coefficient range (CL = -0.15 to 0.7, approximately) of the tests. There is a severe break in the pitching-moment curve at M=2.29 which might result in a pitch-up condition in flight, and also a large forward movement of the aerodynamic center with increasing Mach number that produces neutral longitudinal stability at M=3.51 for the moment center used in this investigation. The model was directionally unstable at M=3.51; however, the level of directional stability was about the same for 0 deg and 10 deg angles of attack.

STABILITY AND CONTROL↗
DOE OSTI2025

Shape‐Stabilization of Phase Change Materials with Carbon‐Conscious Poly(hydroxy)Urethane Foams

Thermal energy regulation is a significant challenge, contributing to over 30% of annual greenhouse gas emission (GHG) emissions. Phase change materials (PCMs) offer a promising solution by storing thermal energy, which can enable the reuse of waste heat for heating and cooling; however, developing materials for shape-stabilized PCMs remains crucial. This work investigates a self-foaming poly(hydroxy)urethane (PHU), derived from a non-isocyanate polyurethane (NIPU), as a porous support for shape-stabilizing paraffinic and salt hydrate PCMs. PHU-encapsulated paraffinic PCMs exhibited excellent thermal stability over repeated cycles. Thermal stability with salt hydrate PCMs, specifically calcium chloride hexahydrate (CaCl 2 •6H 2 O), is achieved by the incorporation of 5 wt.% barium carbonate (BaCO 3 ) into the PHU foam. This enabled stable cycling for over 48 cycles with desirable thermal properties, i.e., a melting point ≈30 °C, high enthalpy (ca. 138 J g −1 per cycle), and a consistent freezing point ≈20 °C, making it suitable for applications in buildings and electric vehicle battery insulation. Also, incorporating graphite (1.5–10 wt.%) into the foam enhanced the thermal conductivity of shape-stabilized CaCl 2 •6H 2 O during heating and cooling cycles. Overall, the approach detailed here offers a carbon-conscious and chemically tunable material for thermal energy storage.

25 ENERGY STORAGE↗
DOE OSTI2026

Hourglass control in staggered-grid hydrodynamics using virtual element stabilization techniques

Numerical simulations using the staggered-grid hydrodynamics (SGH) discretization suffer from hourglass instabilities. In this work, we develop a stabilization method to suppress the hourglass instabilities using techniques from the virtual element method (VEM). The stiffness matrix of the VEM consists of two terms: the consistency matrix which is rank deficient and the stability matrix. Here, we first show that in two dimensions and on general polygons, the stiffness matrix of the SGH is identical to the consistency matrix of the linear VEM for both the diffusion equation and the linear elasticity equation. These analyses explain the origin of the hourglass instabilities of the SGH discretization method, and establish a theoretical foundation for our proposed stabilization method by augmenting the stiffness matrix of the SGH discretization using the VEM stability matrix. Then, we present numerical examples using Lagrangian SGH simulations. The numerical experiments demonstrate that the proposed VEM stabilization method is effective at eliminating hourglass modes in the SGH discretization.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Predicting synthetic mRNA stability using massively parallel kinetic measurements, biophysical modeling, and machine learning

Abstract mRNA degradation is a central process that affects all gene expression levels, though it remains challenging to predict the stability of a mRNA from its sequence, due to the many coupled interactions that control degradation rate. Here, we carried out massively parallel kinetic decay measurements on over 50,000 bacterial mRNAs, using a learn-by-design approach to develop and validate a predictive sequence-to-function model of mRNA stability. mRNAs were designed to systematically vary translation rates, secondary structures, sequence compositions, G-quadruplexes, i-motifs, and RppH activity, resulting in mRNA half-lives from about 20 seconds to 20 minutes. We combined biophysical models and machine learning to develop steady-state and kinetic decay models of mRNA stability with high accuracy and generalizability, utilizing transcription rate models to identify mRNA isoforms and translation rate models to calculate ribosome protection. Overall, the developed model quantifies the key interactions that collectively control mRNA stability in bacterial operons and predicts how changing mRNA sequence alters mRNA stability, which is important when studying and engineering bacterial genetic systems.

Cetnar, Daniel P.↗
DOE OSTI2024

Analysis of neoclassical tearing mode stabilization experiment by electron cyclotron injection in KSTAR

We report the neoclassical tearing mode (NTM) stabilization experimental results by injection of the electron cyclotron (EC) beam in KSTAR, and its analysis with integrated modelling. In the KSTAR experiment, NTM was intentionally induced and the EC beam was injected by the plasma control system (PCS) to stabilize it. Here, the EC angle was controlled based on the minimum seeking algorithm for the island growth rate. Although the EC angle was not changed significantly, the island width significantly decreased towards the end of the experiment followed by the recovery of plasma performance. To assess the NTM stabilization experiment from a stability perspective, we performed integrated modelling with TRIASSIC utilizing the reconstructed equilibrium with magnetic diagnostics and motional stark effect diagnostics. As a result, we observed that the NTM is stabilized by EC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Interpreting AI for fusion: An application to plasma profile analysis for tearing mode stability

Artificial intelligence models have demonstrated strong predictive capabilities for various instabilities in fusion devices such as Tokamaks, including tearing modes (TM), edge localized modes, and disruptive events, but their opaque nature raises concerns about safety and trustworthiness when applied to fusion power plants. Here, we present a physics-based interpretation framework using a TM prediction model as a demonstration that is validated through a dedicated DIII-D TM avoidance experiment. By applying Shapley analysis, we identify how profiles such as rotation, temperature, and density contribute to the model's prediction of TM stability. Our analysis shows that in our experimental scenario, core electron temperature and rotation peaking play the primary role in TM stability, while density changes have smaller effects on stability. We show that off-axis ion temperature stabilizes TMs, suggesting that off-axis neutral beam heating can further stabilize this scenario. This work presents a generalizable ML-based event prediction methodology, from training to physics-driven interpretation, bridging the gap between physics understanding and opaque ML models.

Farre-Kaga, Hiro J. [Princeton Univ., NJ (United S↗
DOE OSTI2025

Low- n stability and plasma response to RMP in various STEP scenarios

The low-n (n is the toroidal mode number) magnetohydrodynamic (MHD) stability and plasma response are numerically investigated for various scenarios designed for STEP, that are relevant for the H-mode pedestal analysis. Control of the edge-localized modes (ELMs) with externally applied resonant magnetic perturbations (RMPs) is considered. Optimization of the ELM control coil current configuration, based on the computed plasma MHD response and well-established figures of merit validated on present-day experiments, finds reasonable robustness of a fixed coil phasing (for a given n-number) to control ELMs in all five STEP plasmas considered. Based on certain semi-empirical criteria, the required coil current to achieve ELM suppression is estimated to be about 10–20 kAt with the n = 1 or 2 RMP configuration and about 100–200 kAt for the n = 4 RMP. Systematic linear stability calculations are used to map out stability windows for the low-n kink-peeling modes, in terms of the ideal-wall location and variation of the edge safety factor q 95 with respect to the target design. The kink-peeling stability boundary is found to be generally sensitive to the q 95 variation, which has implications for achieving the quiescent H-mode regime in STEP. Full toroidal quasilinear initial-value simulations for these STEP plasmas find that generation of the edge-harmonic oscillations (EHOs) depends sensitively on the plasma scenario, the initial linear stability of the kink-peeling modes, the initial plasma toroidal flow and q 95 . In general, it is easier (more robust) to access the EHO-regime for two of the cases considered with smaller plasma volume and higher on-axis safety factor. Finally, quasilinear simulations find robust density pumpout due to applied RMPs in these STEP plasmas, but the effect on the plasma toroidal flow varies among different cases.

EHO↗
DOE OSTI2024

MHD stability analysis against pressure and current-driven modes in the SMall Aspect Ratio Tokamak

Linear magnetohydrodynamic (MHD) simulations for the SMall Aspect Ratio Tokamak (SMART) have been carried out for the first time, for both positive (PT) and negative triangularity (NT) shaped plasmas using the MARS-F code. The MHD stability of projected SMART plasmas against internal kinks, infernal modes and edge peeling-ballooning modes have been analyzed for a wide range of realistic equilibria. A stabilization of internal kinks and infernal modes is observed when increasing the safety factor profile and reducing plasma beta. PT shaped plasmas are more stable against both internal kinks and infernal modes than their counterpart NT shaped plasmas. Toroidal flows have little impact on the MHD stability of the internal kinks, but they have a strong stabilizing effect on infernal modes, which can be further mitigated in NT shaped plasmas. The MHD stability of peeling-ballooning modes is reduced in NT shaped plasmas, as observed in conventional tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Stability evaluation and mitigation strategies in advanced tokamaks using 3D MHD spectroscopy

Multi-modal, active 3D MHD spectroscopy is applied in high-performance advanced tokamak scenarios to study their stability time evolution, revealing an intriguing dependence on both and . A tailored applied 3D field provides a 3D plasma response to extract the growth rate of the least stable mode. The estimated growth rate finds a decrease in stability when the minimum in the safety factor (q) passes through 2.0 and reveals inherent risks of crossing an additional rational surface at integer q min , even above the usual q = 1 sawtooth condition. Based on this result, the potential scenario in which q min ~ 2 can be safely crossed during a more stable lower β N phase was investigated, and the improved stability of this scenario is confirmed by the estimated growth rate. This shows that 3D MHD spectroscopy can offer insights into strategies for improving stability by identifying the vulnerable aspects of such scenarios. In addition, the method highlights its potential for instability avoidance by enabling early detection of multiple modes, even before magnetic coils can measure them. The measured growth rate by the 3D MHD spectroscopy shows its reliability by exhibiting a correlation with the programmed rises in plasma beta across various high β N and high q min discharges. In addition, this method is successfully applied during rapidly evolving I p ramp-up phases, a key part of the scenario development. By achieving reasonable growth rate measurements at high-performance scenario developments, this technique contributes to the development of advanced diagnostic tools for tokamak scenario stability, which will help identify an effective pathway to stable, high-performance scenarios.

Yang, S. M. [Princeton Plasma Physics Laboratory (↗
DOE OSTI2026

Clifford Hierarchy Stabilizer Codes: Transversal Non-Clifford Gates and Magic States

A fundamental problem in fault-tolerant quantum computation is the tradeoff between universality and dimensionality, exemplified by the the Bravyi-König bound for $n$-dimensional topological stabilizer codes. In this work, we extend topological Pauli stabilizer codes to a broad class of $n$-dimensional Clifford hierarchy stabilizer codes. These codes correspond to the $(n+1)$D Dijkgraaf-Witten gauge theories with non-Abelian topological order. We construct transversal non-Clifford gates through automorphism symmetries represented by cup products. In 2D, we obtain the first transversal non-Clifford logical gates including T and CS for Clifford stabilizer codes, using the automorphism of the twisted $\mathbb{Z}_2^3$ gauge theory (equivalent to $\mathbb{D}_4$ topological order). We also combine it with the just-in-time decoder to fault-tolerantly prepare the logical T magic state in $O(d)$ rounds via code switching. In 3D, we construct a transversal logical $\sqrt{\text{T}}$ gate in a non-Clifford stabilizer code at the third level of the Clifford hierarchy, located on a tetrahedron corresponding to a twisted $\mathbb{Z}_2^4$ gauge theory. Furthermore, our constructions surpass the Bravyi-König bound by achieving the logical gates in the $(n+1)$-th level of Clifford hierarchy in $n$ spatial dimension.

Kobayashi, Ryohei [Institute for Advanced Study, P↗
DOE OSTI2025

Engineered IL-18 variants with half-life extension and improved stability for cancer immunotherapy

Background The pro-inflammatory cytokine, interleukin-18 (IL-18), plays an instrumental role in bolstering anti-tumor immunity. However, the therapeutic application of IL-18 has been limited due to its susceptibility to neutralization by IL-18 binding protein (IL-18BP), short in vivo half-life, and unfavorable physicochemical properties. Methods In order to overcome the poor drug-like properties of IL-18, we installed an artificial disulfide bond, removed the native, unpaired cysteines, and fused the stabilized cytokine to an IgG Fc domain. The stability, potency, pharmacokinetic and pharmacodynamic properties as well as efficacy of disulfide-stabilized IL-18 Fc-fusion (dsIL-18-Fc) were assessed via in vitro and in vivo studies. Results The stability and mammalian host cell production yields of dsIL-18-Fc were improved, compared to the wild-type (WT) cytokine, while maintaining its biological potency and interactions with IL-18 receptor α (IL-18Rα) and IL-18BP. Recombinant fusion of the cytokine to an IgG Fc domain provided extended half-life. Notably, despite maintaining sensitivity to IL-18BP, dsIL-18-Fc was effective at activating both T and natural killer (NK) cells, and elicited a strong anti-tumor response, either as a single agent, or in conjunction with anti-programmed cell death-ligand 1 (anti-PD-L1) therapy. Conclusions We engineered IL-18 for reinforced stability, extended half-life, and improved manufacturability. The therapeutic benefit of dsIL-18-Fc, coupled with a more favorable manufacturability profile and enhanced drug-like properties, underscores the potential utility of this engineered cytokine in cancer immunotherapy.

Immunology↗
NASA NTRS1972

Frequency stabilization of a high power argon laser.

A technique for frequency stabilizing a high power, single frequency argon laser is described which offers certain advantages over those that have already been reported. This system is capable of maintaining a relative short term frequency stability of the order of plus or minus two parts in one billion and a long term stability (2 hr) of about plus or minus five parts in one billion for the 5145-A line at a power level of 750 mW. This short and long term stability is achieved by means of a multiple feedback loop composed of an optical cavity discriminator which is stabilized against an iodine vapor absorption line.

Hohimer, J. P.↗
NASA NTRS1972

Stability of large-scale systems with stable and unstable subsystems.

The purpose of this paper is to develop new methods for constructing vector Liapunov functions and broaden the application of Liapunov's theory to stability analysis of large-scale dynamic systems. The application, so far limited by the assumption that the large-scale systems are composed of exponentially stable subsystems, is extended via the general concept of comparison functions to systems which can be decomposed into asymptotically stable subsystems. Asymptotic stability of the composite system is tested by a simple algebraic criterion. With minor technical adjustments, the same criterion can be used to determine connective asymptotic stability of large-scale systems subject to structural perturbations. By redefining the constraints imposed on the interconnections among the subsystems, the considered class of systems is broadened in an essential way to include composite systems with unstable subsystems. In this way, the theory is brought substantially closer to reality since stability of all subsystems is no longer a necessary assumption in establishing stability of the overall composite system.

Grujic, Lj. T.↗
NASA NTRS1972

Liapunov stability analysis of hybrid dynamical systems with multi-elastic domains.

This paper presents a Liapunov stability theory applicable to hybrid systems with multi-elastic domains. The mathematical formulation consists of a simultaneous set of ordinary and partial differential equations. A new stability theorem, particularly suited to such hybrid systems, is introduced. To predict the system stability by means of the theorem, it is necessary to construct a functional k, where k is free of spatial derivatives and bounding the Hamiltonian H from below. The conditions under which the construction of such a functional is possible are shown. As an application of the theory, the attitude stability of an earth-pointing satellite with multi-elastic domains is investigated and closed-form stability criteria derived.

Meirovitch, L.↗
NASA NTRS1972

On practical stability.

In this paper, a class of nonlinear nonautonomous systems with multiple nonlinearities is considered. Sufficient conditions are developed for a type of practical stability with specified settling time. The conditions are independent of the actual form of nonlinear characteristics so that they can be interpreted as conditions for 'absolute' practical stability. The stability test is reduced to verification of the Hurwitz property of a constant matrix. This makes the stability analysis of the considered class of nonlinear systems convenient for machine computations. The proposed practical stability analysis is applied to a third-order system with several nonlinearities.

Grujic, L. T.↗
NASA NTRS1973

Stability analysis and trend study of a balloon tethered in a wind, with experimental comparisons

A stability analysis and trend study for a balloon tethered in a steady wind are presented. The linearized, stability-derivative type analysis includes balloon aerodynamics, buoyancy, mass (including apparent mass), and static forces resulting from the tether cable. The analysis has been applied to a balloon 7.64 m in length, and the results are compared with those from tow tests of this balloon. This comparison shows that the analysis gives reasonable predictions for the damping, frequencies, modes of motion, and stability boundaries exhibited by the balloon. A trend study for the 7.64-m balloon was made to illustrate how the stability boundaries are affected by changes in individual stability parameters. The trends indicated in this study may also be applicable to many other tethered-balloon systems.

Redd, L. T.↗