Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

High thermal stability of La 2 O 3 and CeO 2 -stabilized tetragonal ZrO 2

Catalyst support materials of tetragonal ZrO 2 , stabilized by either La 2 O 3 (La 2 O 3 -ZrO 2 ) or CeO 2 (CeO 2 -ZrO 2 ), were synthesized under hydrothermal conditions at 200 °C with NH 4 OH or tetramethylammonium hydroxide as the mineralizer. From In Situ synchrotron powder X-ray diffraction and small-angle X-ray scattering measurements, the calcined La 2 O 3 -ZrO 2 and CeO 2 -ZrO 2 supports were nonporous nanocrystallites that exhibited rectangular shapes with thermal stability up to 1000 °C in air. These supports had an average size of ~10 nm and a surface area of 59-97 m 2 /g. The catalysts Pt/La 2 O 3 -ZrO 2 and Pt/CeO 2 -ZrO 2 were prepared by using atomic layer deposition with varying Pt loadings from 6.3-12.4 wt %. Mono-dispersed Pt nanoparticles of ~3 nm were obtained for these catalysts. As a result, the incorporation of La 2 O 3 and CeO 2 into the t-ZrO 2 structure did not affect the nature of the active sites for the Pt/ZrO 2 catalysts for the water-gas-shift (WGS) reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal Stability of Metal Nanocrystals: An Investigation of the Surface and Bulk Reconstructions of Pd Concave Icosahedra [On the Thermal Stability of Metal Nanocrystals: An Investigation of the Surface and Bulk Reconstructions of Pd Concave Icosahedra]

Despite the remarkable success in controlling the synthesis of metal nanocrystals, it still remains a grand challenge to stabilize and preserve the shapes or internal structures of metastable kinetic products. In this work, we address this issue by systematically investigating the surface and bulk reconstructions experienced by a Pd concave icosahedron when subjected to heating up to 600 °C in vacuum. We used in situ high-resolution transmission electron microscopy to identify the equilibration pathways of this far-from-equilibrium structure. We were able to capture key structural transformations occurring during the thermal annealing process, which were mechanistically rationalized by implementing self-consistent plane-wave density functional theory (DFT) calculations. Specifically, the concave icosahedron was found to evolve into a regular icosahedron via surface reconstruction in the range of 200–400 °C, and then transform into a pseudospherical crystalline structure through bulk reconstruction when further heated to 600 °C. As a result, the mechanistic understanding may lead to the development of strategies for enhancing the thermal stability of metal nanocrystals.

36 MATERIALS SCIENCE↗

Robust, High-Performing Maize–Perovskite-Based Solar Cells with Improved Stability

Herein, we focus on improving the long-term chemical and thermomechan-ical stability of perovskite solar cells (PSCs), two major challenges currently limiting their commercial deployment. Our strategy incorporates a long-chain starch polymer into the perovskite precursor. The starch polymer confers multiple beneficial effects by forming hydrogen bonds with the methylammonium iodide precursor, templating perovskite growth that results in a compact and homogeneous film deposited in a simple one-step coating (antisolvent-free). The inclusion of starch in the methylammonium lead iodide films strongly improves their thermomechanical and environmental stability while maintaining a high photovoltaic performance. The fracture energy (G c ) of the film is increased to above 5 J/m 2 by creating a nanocomposite that provides intrinsic reinforcement at grain boundaries. Additionally, improved optoelectronic properties achieved with the starch polymer enable good photostability of the active layer and enhanced resistance to thermal cycling.

14 SOLAR ENERGY↗

Ce x Zr 1– x O 2 -Supported CrO x Catalysts for CO 2 -Assisted Oxidative Dehydrogenation of Propane–Probing the Active Sites and Strategies for Enhanced Stability

CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODH) represents an attractive approach for propylene production and CO 2 utilization. As a soft oxidant, CO 2 can minimize overoxidation of the hydrocarbons to enhance the propylene selectivity while increasing the equilibrium yield. However, a major challenge of CO 2 -ODH is the rapid deactivation of the catalysts. The current study focuses on designing Ce x Zr 1–x O 2 -mixed oxide-supported CrO x catalysts for CO 2 -ODH with enhanced product selectivity and catalyst stability. By doping 0–30% Ce in the Ce x Zr 1–x O 2 mixed oxide support, propane conversion of 53–79% was achieved at 600 °C, with propylene selectivity up to 82%. Compared to the pure ZrO 2 -supported catalyst (i.e., 5 wt %Cr/ZrO 2 ), 20–30 %Ce doped catalysts (i.e., 5 wt %Cr/Ce 0.2 Zr 0.8 O 2 and 5 wt %Cr/Ce 0.3 Zr 0.7 O 2 ) inhibited the formation of CH 4 and ethylene and improved propylene selectivity from 57 to 77–82%. Detailed characterizations of the 5%Cr/Ce 0.2 Zr 0.8 O 2 catalyst and density functional theory (DFT) calculations indicated that Cr 3+ is the active species during the CO 2 -ODH reaction, and the reaction follows a non-redox dehydrogenation pathway. Coke formation was determined to be the primary reason for catalyst deactivation, and the addition of Ce to the ZrO 2 support greatly enhanced the coke resistance, leading to superior stability. Furthermore, coke removal by oxidizing the catalyst in air is effective in restoring its activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new matching method for linear stability analysis of MHD modes close to the ideal MHD marginal stability

A new matching method has been invented for linear stability analysis of magnetohydrodynamics (MHD) modes for plasmas marginally stable against ideal MHD. An inner region with a finite width is utilized as in our previous study [M. Furukawa, S. Tokuda, and L.-J. Zheng, Phys. Plasmas 17, 052502 (2010)]. An ordering scheme for the outer region has been newly developed, thereby it succeeds to include effects of small plasma inertia and resistivity perturbatively in the outer region. The corresponding boundary condition requires direct, not asymptotic, matching of the outer and inner solutions, which assumes nothing special for the behavior of parallel electric field across the matching points. The union of the ordering scheme and the boundary condition enables us to apply our matching method even for plasmas marginally stable against ideal MHD. Because our matching method is not asymptotic, it is easy to implement numerically. The stability analysis of resistive MHD modes, such as internal kink and tearing modes, is satisfactory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Paramagnetic defects in electron-irradiated yttria-stabilized zirconia: Effect of yttria content

We have studied the effect of the yttria content on the paramagnetic centres in electron-irradiated yttria-stabilized zirconia (ZrO2: Y3+) or YSZ. Single crystals with 9.5 mol% or 18 mol% Y2O3 were irradiated with electrons of 1.0, 1.5, 2.0 and 2.5 MeV. The paramagnetic centre production was studied by X-band EPR spectroscopy. The same paramagnetic centres were identified for both chemical compositions, namely two electron centres, i.e. i) F+-type centres (involving singly ionized oxygen vacancies), and ii) so-called T centres (Zr3+ in a trigonal symmetry site), and hole-centres. A strong effect is observed on the production of hole-centres which are strongly enhanced when doubling the yttria content. However, no striking effect is found on the electron centres (except the enhancement of an extra line associated to the F+-type centres). It is concluded that hole-centres are produced by inelastic interactions, whereas F+-type centres are produced by elastic collisions with no effect of the yttria content on the defect production rate. In the latter case, the threshold displacement energy (Ed) of oxygen is estimated from the electron-energy dependence of the F+-type centre production rate, with no significant effect of the yttria content on Ed. An Ed value larger than 120 eV is found. Accordingly, classical molecular dynamics (MD) simulations with a Buckingham-type potential show that Ed values for Y and O are likely to be in excess of 200 eV. It is concluded that F+-type centres might be actually oxygen divacancies (F2+-type centres). Due to the difficulty in displacing O or Y atoms, the radiation-induced defects may alternatively be a result of Zr atom displacements for Ed = 80 ± 1 eV with subsequent defect re-arrangement.

colour centres↗

Ternary superlattice boosting interface-stabilized magnetic chirality

In cobalt-nickel multilayers grown on iridium surfaces, magnetic homo-chirality can be stabilized by Dzyaloshinskii-Moriya interactions (DMI) at the interface with the substrate. When thickness of the multilayers is increased beyond threshold values, then non-chiral bulk properties exceed interface contributions and this type of chirality vanishes. Here, we use spin-polarized low energy electron microscopy to measure these thickness thresholds, and we determine estimates of the strength of the DMI from the measurements. Even though the same 5d heavy metal is used as a substrate, a remarkably large variation is found between the two 3d magnets: our results indicate that the strength of the DMI at Co/Ir interfaces is three times larger than at Ni/Ir interfaces. We show how this finding provides ways to extend interfacial-DMI stabilization of domain wall chirality to 3d/5d/3d ternary multilayers such as [Ni/Ir/Co]{sub n}. Such strategies may extend chirality-control to larger film thickness and a wider range of substrates, which may be useful for designing new spintronics devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

H-treatment impact on conductive-filament formation and stability in Ta{sub 2}O{sub 5}-based resistive-switching memory cells

In this article, we evidence the lower formation energy and improved stability of the conductive filament (CF) formed in TiN\Ta{sub 2}O{sub 5}\Ta resistive-switching memory cells treated in NH{sub 3} atmosphere at 400 °C. This annealing treatment results in (i) lower forming voltage, (ii) lower CF resistance, and (iii) longer retention lifetime of the oxygen-vacancy (V{sub o}) chain constituting the CF. Atomistic insights into these processes are provided by ab initio calculations performed for hydrogen (H) species incorporated in non-stoichiometric Ta{sub 2}O{sub 5} supercells: (i) V{sub o} formation energy is reduced by the presence of H, (ii) V{sub o}-chain CF conductivity is increased by V{sub o} + OH complex formation, and (iii) V{sub o}-chain retention is strengthened by the stable V{sub o} + OH complex. As a result, efficient CF formation and excellent state stability are obtained after 15 days at 250 °C.

36 MATERIALS SCIENCE↗

Synergistic stabilization of metastable Fe{sub 23}B{sub 6} and γ-Fe in undercooled Fe{sub 83}B{sub 17}

Previous investigations of undercooled liquid Fe{sub 83}B{sub 17} near the eutectic composition have found that metastable crystalline phases, such as Fe{sub 23}B{sub 6}, can be formed and persist down to ambient temperature even for rather modest cooling rates. Using time-resolved high-energy x-ray diffraction on electrostatically levitated samples of Fe{sub 83}B{sub 17}, we demonstrate that the Fe{sub 23}B{sub 6} metastable phase and fcc γ-Fe grow coherently from the undercooled Fe{sub 83}B{sub 17} liquid and effectively suppress the formation of the equilibrium Fe{sub 2}B + bcc α-Fe phases. The stabilization of γ-Fe offers another opportunity for experimental investigations of magnetism in metastable fcc iron.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interface and thickness dependent domain switching and stability in Mg doped lithium niobate

Controlling ferroelectric switching in Mg doped lithium niobate (Mg:LN) is of fundamental importance for optical device and domain wall electronics applications that require precise domain patterns. Stable ferroelectric switching has been previously observed in undoped LN layers above proton exchanged (PE) phases that exhibit reduced polarization, whereas PE layers have been found to inhibit lateral domain growth. Here, Mg doping, which is known to significantly alter ferroelectric switching properties including coercive field and switching currents, is shown to inhibit domain nucleation and stability in Mg:LN above buried PE phases that allow for precise ferroelectric patterning via domain growth control. Furthermore, piezoresponse force microscopy (PFM) and switching spectroscopy PFM reveal that the voltage at which polarization switches from the “up” to the “down” state increases with increasing thickness in pure Mg:LN, whereas the voltage required for stable back switching to the original “up” state does not exhibit this thickness dependence. This behavior is consistent with the presence of an internal frozen defect field. The inhibition of domain nucleation above PE interfaces, observed in this study, is a phenomenon that occurs in Mg:LN but not in undoped samples and is mainly ascribed to a remaining frozen polarization in the PE phase that opposes polarization reversal. This reduced frozen depolarization field in the PE phase also influences the depolarization field of the Mg:LN layer above due to the presence of uncompensated polarization charge at the PE-Mg:LN boundary. These alterations in internal electric fields within the sample cause long-range lattice distortions in Mg:LN via electromechanical coupling, which were corroborated with complimentary Raman measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polymer stabilization of the smectic C-alpha* liquid crystal phase—Over tenfold thermal stabilization by confining networks of photo-polymerized reactive mesogens

The smectic C*-alpha (SmC{sub α}*) phase is one of the sub-phases of ferroelectric liquid crystals that has drawn much interest due to its electro-optical properties and ultrafast switching. Generally observed above the ferroelectric SmC* phase in temperature, the SmC{sub α}* commonly shows only very narrow phase temperature range of a few degree Celsius. To broaden the SmC{sub α}* phase, polymer stabilization was investigated for thermal phase stabilization. Two different reactive monomers were tested in three mixtures, and all three broadened the temperature range of the SmC{sub α}* phase from 3 °C to 39 °C. The current reversal method was used to determine the phase existence versus temperature. Moreover, the texture and network structure was studied by polarized optical microscopy and scanning electron microscopy, with the latter revealing the confinement of the smectic layer structure within the porous polymer network.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Non-axisymmetric equilibrium and stability using the ELITE stability code

Linear perturbation theory is used to model the ideal magnetohydrodynamic stability of tokamak equilibria under the application of external 3D magnetic perturbations. We use the ELITE code to produce both a linear plasma response, as well as the linear axisymmetric toroidal eigenmodes which are used as basis functions for the 3D perturbative stability analysis. In this work, the symmetry breaking produces coupling of modes with different toroidal mode number, n, leading to modification of the linear growth rates, and poloidal localisation of the nonaxisymmetric peeling–ballooning mode at sufficiently large applied field.

3D MHD stability↗

Stability of spin-0 graviton and strong coupling in Horava-Lifshitz theory of gravity

In this paper, we consider two different issues, stability and strong coupling, which have been raised recently in the newly proposed Horava-Lifshitz theory of quantum gravity with the projectability condition. We find that all the scalar modes are stable in the de Sitter background, due to two different kinds of effects, one from high-order derivatives of the spacetime curvature and the other from the exponential expansion of the de Sitter space. Combining these effects properly, one can make the instability found in the Minkowski background never appear even for small-scale modes, provided that the IR limit is sufficiently close to the relativistic fixed point. At the fixed point, all the modes become stabilized. We also show that the instability of Minkowski spacetime can be cured by introducing mass to the spin-0 graviton. The strong coupling problem is investigated following the effective field theory approach, and we find that it cannot be cured by the Blas-Pujolas-Sibiryakov mechanism, initially designed for the case without the projectability condition, but might be circumvented by the Vainshtein mechanism, due to the nonlinear effects. In fact, we construct a class of exact solutions, and show explicitly that they reduce smoothly to the de Sitter spacetime in the relativistic limit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗