Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structured packing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Extended-MHD simulations of disruption mitigation via massive gas injection in SPARC

Recent developments to the M3D-C1 code enable higher fidelity modeling of disruptions, and can be applied in the design verification of reactor-scale tokamaks. Among these new capabilities is a method to mesh conducting vessel structures such as coils and passive plates, packing of the toroidal mesh around gas injectors, as well as anisotropic resistivity inside the vessel structures. We present extended-magnetohydrodynamic (MHD) simulations of disruption mitigation via massive gas injection (MGI) in SPARC. The goal of this study is to inform the disruption mitigation layout of SPARC and aid in the design of an effective gas injector configuration. Fully three-dimensional simulations with M3D-C1 are carried out for various injector configurations with the primary goal of determining the effect of different MGI parameters on heat loads and vessel forces. The simulations include a model for impurity ionization, recombination, advection and radiation, as well as spatially resolved conducting structures around the plasma. A localized mixture of deuterium and neon with a small toroidal and poloidal width is injected in up to six locations. We demonstrate that M3D-C1 can model a rapid shutdown via MGI using narrow and more realistic gas plumes than in previous simulations. As a result of the q = 1 surface in the SPARC baseline case a sawtooth is observed early in the simulations. Despite the sawtooth and the onset of edge MHD instabilities, the impurity distribution remains localized around the injector locations, but enables a radiative shutdown of the plasma. We find that using the maximum of six gas injectors results in a lower peaking factor and leads to a more even distribution of radiation toroidally than using two injectors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Microscopic Theory of Long-Time Center-of-Mass Self-Diffusion and Anomalous Transport in Ring Polymer Liquids

We construct a microscopic theory at the level of segment-scale correlated space–time intermolecular forces for the long-time center-of-mass (CM) diffusion constant and intermediate-time non-Fickian transport in dense solutions and melts of ring polymers. The approach combines ideas of polymer, colloid, and liquid-state statistical mechanics to quantify how the multifractal intra-ring conformational structure and inter-ring packing correlations determine dynamic caging constraints and time-dependent friction. Breakdown of Rouse theory is predicted to occur due to length scale-dependent temporal correlation of forces exerted on pairs of tagged ring segments from surrounding polymers. At large enough degrees of polymerization (N), a stronger scaling of the CM diffusion constant (D ∝ N –2 ) is predicted, with a crossover N D proportional to the product of the system-specific macromolecular volume fraction and dimensionless compressibility. In analogy with caging effects in glass-forming fluids, the theory does appear to begin to fail at sufficiently high N/N D for the center-of-mass diffusivity, likely due to another crossover to an even slower activated transport regime. However, use of N/N D with the theoretically predicted N D , in conjunction with dynamic blob scaling ideas for local Rouse friction, collapses semidilute and concentrated solution simulation data onto a master curve. Based on the same physical ideas employed to predict the diffusion constant, a generalized Langevin equation description is formulated for intermediate-time CM transport. It predicts two subdiffusive regimes that emerge due to the self-similar nature of internal ring structure. Analytic and numerical predictions for the apparent non-Fickian exponent as a function of time, N/N D and dimensionless compressibility, the evolution of the maximum degree of subdiffusive motion with N/N D , and the time scale for recovering Fickian diffusion are made, all of which are in good accordance with melt simulations. Furthermore, the present work sets the stage to address activated dynamics and glass formation on the macromolecular scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Formation of Vertically Oriented Channels during Calcination of Surfactant-Templated Titania-Doped Mesoporous Silica Thin Films

Here, the mesoporous structure development during calcination of titania-doped mesoporous silica thin films is characterized by in situ grazing-incidence small angle x-ray scattering (GISAXS). Varying amounts of titania (≤ 6 mol%) are incorporated in cetyltrimethylammonium bromide (CTAB) templated film by two methods in this study: dispersion of titania in the silica matrix, and fixing titania at the pore surface by complexation of the titania precursor with a sugar-based co-surfactant, dodecyl maltoside (C 12 G 2 ). Before calcination, films templated with only CTAB display a mesoporous structure with a mixture of in-plane 2D hexagonal and randomly oriented porous structure, while C 12 G 2 -complexed film possessed randomly oriented mesostructure only. Both methods yield a final structure of hexagonal close-packed pores orthogonally oriented to the substrate after calcination at 500 °C. This is attributed to weak Si-O-Ti bonds which allow sintering to occur at 500 °C, combined with unidirectional thermal contraction of the film in the vertical direction. Anisotropic stress and annealing of the films allows the randomly oriented pores to merge vertically and form channels with pore diameter of 2.3 ± 0.3 nm. Titania doping greater than 1% is required for this transformation in films with no C 12 G 2 surfactant used while the transformation was observed for films with C 12 G 2 complexation even at low (0.005%) titania doping, perhaps accentuated by orientational disorder introduced by the sugar surfactant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Delineating the Effects of Counterions on the Structural and Vibrational Properties of U(IV) Lindqvist Polyoxometalate Complexes

Herein we conducted a full investigation into the fundamental structural and vibrational properties of uranium(IV) Peacock−Weakley-type lacunary Lindqvist (W 10 ) polyoxometalate (POM) complexes. We recently demonstrated the importance of the secondary lattice elements in tuning the distortion of the D 4d symmetry in W 10 POM complexes, and here, we synthesized eight UW 10 complexes with different alkali metal counterions and evaluated how the composition and packing of counterion species affected complex structural and vibrational properties. Single-crystal X-ray diffraction analysis on complexes 1−8 revealed changes in structural distortion parameters as a function of differences in counterion configurations, while far-infrared and Raman spectra for 1−8 also demonstrated that vibrational mode frequencies were sensitive to changes in counterion composition and packing. To more effectively compare different counterion configurations, we developed counterion effective ionic radius (eIR) as a new structural parameter, and comparisons between structural distortion parameters and eIR values strongly suggested that modulation by the secondary lattice elements can affect structural and vibrational manifolds within POM complexes. Partial least squares (PLS) analysis was used to quantitatively evaluate correlations observed within this investigation, and PLS statistical models showed a strong correlation between counterion eIR and both structural distortion parameters and vibrational mode frequencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Genarris 2.0: A Random Structure Generator for Molecular Crystals

Genarris is an open source Python package for generating random molecular crystal structures with physical constraints for seeding crystal structure prediction algorithms and training machine learning models. Here we present a new version of the code, containing several major improvements. A MPI-based parallelization scheme has been implemented, which facilitates the seamless sequential execution of user-defined workflows. A new method for estimating the unit cell volume based on the single molecule structure has been developed using a machine-learned model trained on experimental structures. A new algorithm has been implemented for generating crystal structures with molecules occupying special Wyckoff positions. A new hierarchical structure check procedure has been developed to detect unphysical close contacts efficiently and accurately. New intermolecular distance settings have been implemented for strong hydrogen bonds. To demonstrate these new features, we study two specific cases: benzene and glycine. Genarris finds the experimental structures of the two polymorphs of benzene and the three polymorphs of glycine. Program summary Program Title: Genarris 2.0 Program Files doi: http://dx.doi.org/10.17632/grx6mz4pjn.1 Licensing provisions: BSD-3 Clause Programming language: Python, C External routines/libraries: Spglib, ASE, pymatgen, SciPy, mpi4py, scikit-learn, PyTorch, FHI-aims. Nature of problem: Molecular crystal structure prediction. Solution method: Genarris 2.0 generates molecular crystal structures over the 230 space groups, on general and special Wyckoff positions, using physical constraints. Down-sampling of the generated structures may be performed subsequently, based on molecular crystal packing descriptors and an unsupervised machine learning algorithm. Lastly, ab initio structure relaxation may be performed for the final pool. Depending on the user-defined workflow implemented, Genarris may be used to generate diverse molecular crystal datasets to seed evolutionary algorithms or to train machine learning algorithms or as a standalone crystal structure prediction method. Restrictions: For crystal structure generation, the molecule of interest must be semi-rigid with no bond rotational degrees of freedom. Unusual features: Genarris 2.0 is a highly distributed program, making use of MPI for Python parallelization. The user has the ability to design and implement workflows by executing a user-defined list of procedures. Genarris 2.0 offers new features including a machine learning model for estimating the molecular volume in the solid state from the single molecule structure, structure generation in special Wyckoff positions of space groups, hierarchical structure checks including rigorous treatment of non-orthogonal structures, and clustering and down-selection workflows combining first principles simulations with machine learning. (C) 2020 Elsevier B.V. All rights reserved.

Crystal structure prediction↗
DOE OSTI2022

Folded network and structural transition in molten tin

The fundamental relationships between the structure and properties of liquids are far from being well understood. For instance, the structural origins of many liquid anomalies still remain unclear, but liquid-liquid transitions (LLT) are believed to hold a key. However, experimental demonstrations of LLTs have been rather challenging. Here, we report experimental and theoretical evidence of a second-order-like LLT in molten tin, one which favors a percolating covalent bond network at high temperatures. The observed structural transition originates from the fluctuating metallic/covalent behavior of atomic bonding, and consequently a new paradigm of liquid structure emerges. The liquid structure, described in the form of a folded network, bridges two well-established structural models for disordered systems, i.e., the random packing of hard-spheres and a continuous random network, offering a large structural midground for liquids and glasses. Our findings provide an unparalleled physical picture of the atomic arrangement for a plethora of liquids, shedding light on the thermodynamic and dynamic anomalies of liquids but also entailing far-reaching implications for studying liquid polyamorphism and dynamical transitions in liquids.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Toward Computation-Guided Design of Tunable Organic-Inorganic CdS Quantum Dot Binary Superlattices

Combining the advantages of structural programmability in sequence-defined biomimetic molecules and the controllable packing geometry in nanoparticle superlattices, we demonstrate a self-assembled organic-inorganic superlattice whose structure can be altered with the slightest change in the sequence of the organic counterpart. Here, oleate-coated CdS quantum dots (QDs) form a square-packed superlattice with a 1:1 molar equivalence of a di-block amphiphilic peptoid (Nbrpe6Dig) in chloroform. In contrast, no apparent structure is observed in the organic solvent alone. Based on theoretical evidence, we show that the assembly is a binary superlattice where both the CdS QDs and the peptoids serve as building blocks and further predict a correlation between the superlattice structure and the peptoid sequence. The computationally guided prediction is validated by experiments where superlattice transformation is observed with modified peptoids. The mechanism identified in our work inspires new ways to control and tune organic-inorganic hybrid nanomaterial self-assembly.

Qi, Xin↗
DOE OSTI2019

Cyclotris(paraquat‐ p ‐phenylenes)

Abstract Reported here is the synthesis, solid‐state characterization, and redox properties of new triangular, threefold symmetric, viologen‐containing macrocycles. Cyclotris(paraquat‐ p ‐phenylene) ( CTPQT 6+ ) and cyclotris(paraquat‐ p ‐1,4‐dimethoxyphenylene) ( MCTPQT 6+ ) were prepared and their X‐ray single‐crystal (super)structures reveal intricate three‐dimensional packing. MCTPQT 6+ results in nanometer‐sized channels, in contrast with its parent counterpart CTPQT 6+ which crystallizes as a couple of polymorphs in the form of intercalated assemblies. In the solid state, MCTPQT 3(.+) exhibits stacks between the 1,4‐dimethoxyphenylene and bipyridinium radical cations, providing new opportunities for the manipulation and control of the recognition motif associated with viologen radical cations. These redox‐active cyclophanes demonstrate that geometry‐matching and weak intermolecular interactions are of paramount importance in dictating the formation of their intricate solid‐state superstructures.

Anamimoghadam, Ommid↗
DOE OSTI2021

High‐Pressure Characterization of Melt‐Castable Energetic Materials: Bis(Nitroxymethylisoxazolyl) Furoxan (DNDIF)

Abstract The high‐pressure behavior of bis(nitroxymethylisoxazolyl) furoxan (DNDIF) was studied at ambient temperature and pressures approaching 30 GPa by Raman spectroscopy and powder X‐ray diffraction. There was no evidence of a phase change observed over this pressure range, indicating that the ambient structure of DNDIF remains stable up to conditions similar to the detonation pressure of the material. Such findings suggest that this melt‐castable explosive may be used in the replacement of 2,4,6‐trinitrotoluene (TNT) in energetic formulations without the concern of uncontrolled polymorphism that might otherwise affect the performance and safety of the munition. Additionally, empirical understanding of the effect of different structural motifs in the crystal packing builds on understanding of what macroscale features are desirable for future materials and gets us closer to the design of future novel energetics.

Bennion, Jonathan C.↗
DOE OSTI2024

Nondestructive Analysis of Commercial Batteries

Electrochemical batteries play a crucial role for powering portable electronics, electric vehicles, large-scale electric grids, and future electric aircraft. However, key performance metrics such as energy density, charging speed, lifespan, and safety raise significant consumer concerns. Enhancing battery performance hinges on a deep understanding of their operational and degradation mechanisms, from material composition and electrode structure to large-scale pack integration, necessitating advanced characterization methods. These methods not only enable improved battery performance but also facilitate early detection of substandard or potentially hazardous batteries before they cause serious incidents. Here, this review comprehensively examines the operational principles, applications, challenges, and prospects of cutting-edge characterization techniques for commercial batteries, with a specific focus on in situ and operando methodologies. Furthermore, it explores how these powerful tools have elucidated the operational and degradation mechanisms of commercial batteries. By bridging the gap between advanced characterization techniques and commercial battery technologies, this review aims to guide the design of more sophisticated experiments and models for studying battery degradation and enhancement.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Automated TEM Reveals Intercrystalline Correlations of Conjugated Polymers

Transmission electron microscopy (TEM) continues to transform polymer science by revealing key aspects of chain packing, phase separation and nanoscale structure. The development of instrumentation and data analyses tools is driving the field forward and enabling new experiments. Here, we use automated high-resolution TEM (HRTEM) and image processing to identify the structure of a conjugated polymer used in organic electronics. Analysis of more than 600 HRTEM images reveals lattice parameters and orientation correlations between crystals, including the preferred alignment of neighboring crystals along the same crystallographic direction that is likely the result of liquid crystalline order.

Fair, Ryan A. [Pennsylvania State University, Univ↗
DOE OSTI2019

Wettability Effects on Primary Drainage Mechanisms and NAPL Distribution: A Pore-Scale Study

The pore-scale processes governing water drainage behavior in porous media have implications for geoscience multiphase scenarios including carbon capture and storage, contaminant site remediation, oil recovery, and vadose zone processes. However, few studies report directly observed pore-scale water drainage phenomena in 3-D soils. This knowledge gap limits our ability to verify assumptions underlying existing models and develop optimal solutions. As such, this paper utilizes synchrotron X-ray microtomography to present an experimental pore-scale examination of nonaqueous phase liquid (NAPL)/water distribution along a primary drainage front as dense NAPL was injected upward into water wetting (WW) and intermediate wetting (IW) sand-packed columns. Pore-network structures were extracted from imaged data sets and mapped onto segmented NAPL/water data sets which allowed quantitative examinations of wettability impacts on (a) the extent to which NAPL fills individual pore bodies and (b) relationships between pore size and the phase occupying the pore, with both considered as a function of distance (and capillary pressure) relative to the NAPL front. These results revealed that several hypotheses treating IW sand similarly to WW sands are simplistic. IW systems exhibited a sequence of pore filling that deviated from traditional capillary pressure-based model predictions: NAPL invades smaller pores, while larger, adjacent pores are bypassed leaving multipore residual water ganglia. NAPL pore saturations were close to 1 and did not change with capillary pressure in IW systems. Overall, the results illustrate how a relatively small change in operative contact angle alters NAPL distribution during water drainage, with important implications for geoscience multiphase flow scenarios.

58 GEOSCIENCES↗
DOE OSTI2026

Supramolecular assembly of molecular wires alternating crown ethers and metal–halide complexes

Metal–halide complexes serve as key emissive centres in halide perovskites; however, precise control over their spatial organization through bottom-up assembly is challenging. Here we show that a crown-ether-assisted supramolecular assembly strategy can alternatingly connect metal–halide complexes and (crown ether@A) 2+ (where ‘A’ is an alkaline earth metal cation) complexes into a one-dimensional molecular wire, which can then be packed into a hexagonal crystal structure. This process resulted in the creation of an (18C6@Ba)MnBr 4 single crystal with green emission, achieving over 80% photoluminescence quantum yield and a narrow full width at half maximum. In addition, the non-centrosymmetric crystal structure gave rise to strong nonlinear optical responses, including second-harmonic generation. This versatile supramolecular assembly approach could be generalized to create various [M(I)X 2 ] − , [M(I)X 3 ] 2− , [M(II)X 4 ] 2− and [M(III)X 5 ] 2− molecular wires, broadening the potential for diverse emission colours and distinct optical properties. This strategy provides a general design principle for constructing supramolecular metal–halide building blocks with diverse optical functionalities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Theoretical investigation of relaxation dynamics in the Au 18 (SH) 14 thiolate-protected gold nanocluster

Experimental findings of Au 18 (GSH) 14 as a photosensitizer with the highest potential compared to other glutathione-protected clusters demand understanding the photophysics and relaxation dynamics of the Au 18 (SR) 14 cluster. To this end, we perform ab initio real-time nonadiabatic molecular dynamics simulations on Au 18 (SH) 14 to investigate its relaxation dynamics compared to the well-studied [Au 25 (SR) 18 ] -1 relaxation dynamics. In this work, the excitations covering up to ~2.6 eV in the optical absorption spectrum are analyzed to understand the electronic relaxation process of the Au 18 (SH) 14 cluster. The ground state growth times of Au 18 (SH) 14 are several orders of magnitude shorter than the growth times observed for the [Au 25 (SH) 18 ] -1 nanocluster. The S 1 (HOMO-LUMO) state gives the slowest decay time (~11 ps) among all the states (S 1 –S 30 ) considered similar to [Au 25 (SH) 18 ] -1 . However, the S 1 state in Au 18 (SH) 14 is a semiring-to-core charge transfer state, whereas S 1 in the [Au 25 (SH) 18 ] -1 cluster is a core-to-core transition. The remaining higher excited states have very short decay time constants less than 1.4 ps except for S 2 which has the second slowest decay of 6.4 ps. The hole relaxations are faster than the electron relaxations in Au 18 (SH) 14 due to the closely packed HOMOs in the electronic structure. Radiative relaxations are also examined using the time-dependent density functional theory method, and the excited state emission energy and lifetime are found to be in good agreement with experiment

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Burton-Cabrera-Frank theory for the influence of off-cut direction on the growth of hcp crystals

The precise direction of the off-cut of a vicinal crystal surface determines the azimuth (in-plane angle) of the surface steps and thus their kink density. Here we develop a Burton-Cabrera-Frank (BCF) theory for step-flow crystal growth that includes the effects of step azimuth. We focus on the basal-plane surfaces of hexagonal close-packed (hcp) and related crystal structures, for which surface steps have alternating properties that depend on azimuth. We build on a previous treatment that considered only a single-step azimuth, 𝜙 = 0, that gives alternating steps of pure A and B type. As 𝜙 increases from zero, the density of kinks on the steps increases. For hcp-type crystals, in addition the structural difference between alternating steps decreases, until they become equivalent at 𝜙 = 30°. We consider the azimuth dependence of the step transparency, attachment, and repulsion parameters of the BCF model, including the effects of both geometrically required and thermally generated kinks. Example calculations are presented that demonstrate the overall effect of step azimuth on BCF predictions for step spacings during steady-state growth and for their dynamics during growth transients. Effects of symmetric and asymmetric step-step repulsion are discussed.

Ju, Guangxu↗
DOE OSTI2023

Composition-dependent fracture energy in metallic glasses

The interplay between metallic glasses (MGs) mechanical properties, fracture energy (G), and glass-forming ability (GFA) and their dependence on alloy composition remain poorly understood. Here, we perform molecular dynamics simulations to investigate the intrinsic composition-dependence of G in Cu x Zr 100-x MGs (x = 20, 30, 40, 50, 64). The results indicate that the value of G increases with Cu content. In addition, it is revealed that MGs with higher G values display higher Poisson’s ratio (ν) and GFA, suggesting a close correlation between fracture toughness, mechanical properties, and GFA. This correlation between G, ν and GFA can be understood based on the fragility (m) of supercooled liquids, which is directly related to the structural heterogeneity in MGs. Larger m values are related to dynamic slowdown and supercooled liquid stabilization, which enhance GFA and the formation of pronounced structural heterogeneity, comprised of loosely packed regions that favor β-relaxation and the activation of shear transformation zones. Those concurrently promote the expansion of the plastic zone at the crack tip, enhancing the observed value of G. Furthermore, these simulation results shed light on the intrinsic relationship between fracture toughness, mechanical properties, and alloy composition in MGs.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Fabricating Fe nanocrystals via encapsulation at the graphite surface

In this paper, the authors describe the conditions under which Fe forms encapsulated nanocrystals beneath the surface of graphite, and they characterize these islands (graphite + Fe) thoroughly. The authors use the experimental techniques of scanning tunneling microscopy (STM) plus x-ray photoelectron spectroscopy (XPS) and the computational technique of density functional theory (DFT). Necessary conditions for encapsulation are preexisting ion-induced defects in the graphite substrate and elevated deposition temperature of 875–900 K. Evidence of encapsulation consists of atomically resolved STM images of a carbon lattice, both on top of the islands and on the sloping sides. The nature of the images indicates that this carbon lattice corresponds to a graphene blanket consisting of more than one graphene sheet that drapes continuously from the top of the island to the graphite substrate. The formation of iron carbide is not observed based on XPS. Shapes of the island footprints are consistent with metallic Fe, predominantly in the hcp or fcc form, though larger islands tend toward bcc. Island structures with hexagonally close-packed lateral hcp or fcc planes are stabilized by their excellent lattice match with the graphite substrate. Evolution of island density with prolonged deposition time provides evidence of coarsening, perhaps via Smoluchowski ripening. The encapsulated Fe clusters are stable in air at room temperature, protected by smaller Fe clusters that decorate defect sites and block permeation of gases. DFT shows that two configurations of Fe are more stable within the gallery than adsorbed on top of the surface: a single atom of Fe and a film (slab) of metallic Fe. Comparison with other metals shows that encapsulated Fe is similar to Cu but dissimilar to Ru or Dy, leading the authors to conclude that carbon dissolution in the metal does not play a role in encapsulation.

36 MATERIALS SCIENCE↗