Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface coating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

An analytical and experimental evaluation of shadow shields and their support members

Experimental tests were performed on a model shadow shield thermal protection system to examine the effect of certain configuration variables. The experimental results were used to verify the ability of an analytical program to predict the shadow shield performance including the shield-support interaction. In general, the analysis (assuming diffuse surfaces) agreed well with the experimental support temperature profiles. The agreement for the shield profiles was not as good. The results demonstrated: (1) shadow shields can be effective in reducing the heat transfer into cryogenic propellant tanks, and (2) the conductive heat transfer through supports can be reduced by selective surface coatings.

Stochl, R. J.↗
NASA NTRS1972

Improvement of reusable surface insulation material

The results are presented of a program to improve the reusable surface insulation (RSI) system through the improvement of the LI-1500 material properties and the simplification of the RSI system. The improvements made include: 2500 F-capability RSI systems, water-impervious surface coatings, establishment of a high-emittance coating constituent, development of a secondary water-reduction system, and achievement of a lower density (9 pcf) RSI material.

Source record↗
NASA NTRS1972

Thermal protection system trade studies on ablators and reuseable surface insulation

Analytical trade studies are presented that consider passive TPS configurations using the following material categories: (1) reuseable surface insulation - surface-coated rigidized ceramic fiber; (2) low density charring ablators; and (3) carbon-carbon and high density ablators for leading edge areas. Emphasized are effects on TPS weight by variations in entry trajectories and material thermal characteristics.

Strouhal, G.↗
NASA NTRS1972

An analytical and experimental evaluation of shadow shields and their support members.

Review of the major results of an analytical and experimental program aimed at determining the potential effectiveness of shadow shields in minimizing radiant heat transfer into cryogenic propellant tanks on long-duration interplanetary missions, taking into account the thermal interaction between shields and their support structures. Analytical procedures are developed and applied that include the strut-shield interaction in predicting shadow shield performance. The results of experimental studies of the effects of configuration variables on the performance of a scale model of a shadow shield system are presented. The experimental results are used to verify the validity of analytical predictions. The results obtained show that: (1) shadow shields can be effective in reducing the heat transfer into cryogenic propellant tanks, and (2) the conductive heat transfer through supports can be reduced by selective surface coatings.

Stochl, R. J.↗
NASA NTRS1973

Applying high-emittance and solar-absorptance coating to aluminum

Coated surface withstands space environment with negilgible change in radiation characteristics and physical properties. Process can be used with any porous substance, as long as pores are large enough to allow molecules of reacting solutions to enter and yet not so large as to allow nickel sulfide to be leached out of pores before sealing.

Progar, D. J.↗
NASA NTRS1972

Some current problems in oxidation kinetics

Experimental data in low temperature and high temperature oxidations are examined from the point of view of reported quantitative inconsistencies. Activation energies for tBuO2 metathesis reactions with alkanes appear to be 7 kcal/mole higher than for comparable reactions of HO2. Related isomerization reactions are examined in the light of these differences without reaching any simple conclusions. The Russell mechanism for a 6-membered, cyclic, transition state for termination of primary and secondary alkyl peroxy radicals is shown to be either inconsistent with thermochemical data, or else unique to solution reactions. Addition reactions of O3 with olefins and acetylenes are shown thermochemically to have the possibility of following concerted and biradical pathways, respectively. Recent data showing strong inhibition by PbO coated surfaces of both oxidation and pyrolysis of i-C4H10 are examined in terms of mechanism.

Benson, S. W.↗
NASA NTRS1973

Optimization of Rei-mullite Physical Properties

Micromechanical and thermal modeling studies prove that ceramic fiber mullite materials is the only system capable of shuttle thermal protection to 1644 K. Hafnia pigmentated mullite surface coatings meet both orbital and reentry thermal radiative requirements for reuse without refurbishment. Thermal and mechanical models show growths potentials associated with the mullite system for a factor of 2 improvement in mechanical properties, and a factor of 2 to 3 reduction in thermal conductivity.

Tanzilli, R. A.↗
NASA NTRS1973

Arc jet tests of RSI materials: Screening and comparative evaluation

Cyclic convective heating test results show that all surface insulation materials tested exhibit a wide range of surface emittance and catalytic activity depending on their surface coatings. Coatings have a significant effect on the overall material response depending on boundary layer characteristics.

Schaefer, J. W.↗
NASA NTRS1973

The depth distribution of hydrogen in lunar materials.

A technique employing the resonant nuclear reaction H-1(F-19, alpha gamma)O-16 has been used to measure hydrogen concentration versus depth in selected coarse fine fragments from the Apollo 11 and Apollo 15 missions, and in glass coated surface chips from two Apollo 15 rocks. The highly variable hydrogen content in the coarse fine fragments is concentrated mainly in a layer extending from the surface to a depth of 2000 plus or minus 500 A. The hydrogen content of the surface region of the Apollo 15 rock chips is comparable to that of the coarse fine samples, but is concentrated mainly within a few hundred angstroms of the surface. The hydrogen depth distribution in a piece of platinum foil from the Apollo 16 Lunar surface Cosmic Ray Experiment was also measured in an attempt to place a limit on the flux of 10- to 40-keV protons associated with a solar flare event.

Leich, D. A.↗
NASA NTRS1973

Thermal control of the solar electric propulsion stage

The thermal control requirements consist of functional requirements related to the various mission phase natural environments, operational requirements of induced power loadings by the solar electric propulsion stage subsystems, and design temperature limits for performance and reliability. The design approach utilizes passive thermal control techniques combining insulation, surface coatings, and sunshields with thermostatically controlled louvers. Heaters are used to regulate certain temperatures for extreme conditions. Details regarding the thruster array thermal control design are discussed, giving attention to the parameters used in the mathematical model, questions of conductive coupling, and thruster estimated power distribution.

Ruttner, L. E.↗
NASA NTRS1973

Physical properties of the stratospheric aerosols

A comparison of the equilibrium vapor pressure over nitric acid solutions with observed water and nitric acid partial pressures in the stratosphere implies that nitric acid cannot be present as an aerosol particle in the lower stratosphere. A similar comparison for sulfuric acid solutions indicates that sulfuric acid aerosol particles are 75% H2SO4 by weight in water, in good agreement with direct observations. The freezing curve of H2SO4 solutions requires that the H2SO4 aerosol particles be solid or supercooled. The equilibrium vapor pressure of H2SO4 in the stratosphere is of the order of 20 picotorr. At stratospheric temperatures, ammonium sulfate is in a ferroelectric phase. As a result, polar molecules may form a surface coating on these aerosols, which may be a fertile ground for further chemical reaction.

Toon, O. B.↗
NASA NTRS1973

O-18/O-16 and Si-30/Si-28 studies of some Apollo 15, 16, and 17 samples

A study of lunar rock samples from eight sites on the near side of the moon showed oxygen isotope abundance variations much smaller than those in meteorites and earth material. The grain-surface coatings of the lunar fines were found to be generally depleted in oxygen relative to silicon. The lunar soils, on the other hand, were somewhat richer in both O18 and Si30 than the lunar crystalline rock.

Taylor, H. P., Jr.↗
NASA NTRS1976

Simplified explosive-weld evaluation

Weld surfaces, coated with commercially available molybdenum disulfide, allow visual inspection of significant indications of bond quality. Process reduces number of trial welds, making explosive bonding more competitive.

Mclarty, D. M.↗
NASA NTRS1975

A study of molecular contamination

Contamination kinetics of typical space materials were studied using several techniques, including ellipsometry. Data were obtained on contaminant deposition rates, sticking coefficients, and reevaporation of the contamination. Materials studied included silicone sealants, a thermal control paint, and a graphite laminate as contaminant sources, and gold coated surfaces, a thermal control paint and a second surface mirror material as the contaminees. Both deposition and reevaporation rates were found to be nonlinear with time, and followed an exponential decay. A hypothesis is presented that the nonlinear behavior was a result of disproportionation of the molecular weight fractions of the polymers. The measured sticking coefficients were found to vary substantially with temperature over narrow ranges. Simulated space radiation was found to reduce the evaporation rates of contaminants by several orders of magnitude.

Allen, T. H.↗
NASA NTRS1976

Electrophoresis experiment for space

The Apollo 16 electrophoresis experiment was analyzed, demonstrating that the separation of the two different-size monodisperse latexes did indeed take place, but that the separation was obscured by the pronounced electroosmotic flow of the liquid medium. The results of this experiment, however, were dramatic since it is impossible to carry out a similar separation on earth. It can be stated unequivocally from this experiment that any electrophoretic separation will be enhanced under microgravity conditions. The only question is the degree of this enhancement, which can be expected to vary from one experimental technique to another. The low-electroosmotic-mobility coating (Z6040-MC) developed under this program was found to be suitable for a free-fluid electrophoretic separation such as the experiment designed for the ASTP flight. The problem with this coating, however, is that its permanency is limited because of the slow desorption of the methylcellulose from the coated surface.

Vanderhoff, J. W.↗
NASA NTRS1975

Surface lubrication of magnetic tape

Friction minimization between magnetic media (tape, cards, drums, etc.) and magnetic transducer (heads, etc.) is a key requirement in recording systems. Results are presented for an investigation intended to eliminate previously encountered shortcomings of friction-reducing treatments by a deposition of an inert liquid film on a fully manufactured (cured) magnetic medium. The film contains no particles, represents a compound characterized by good lubricating and thermal properties, is inert with respect to the normal formulation constituents, and has low surface tension and vapor pressure characteristics. The deposited film need only be molecularly thin to impart adequate lubricating properties to the tape. The discussion covers the characteristics of the surface lubricant, method of application, and surface coated magnetic media test results. Greater than 5 million passes of the 3M 900 tape on a loop tester are achieved with no apparent effect on the tape and with head wear decreased by as much as a factor of ten

Wright, C. D.↗
NASA NTRS1977

Process sharpens micrographic images

Photomicrographs produced by bright field illumination of surface coated with carbon deposited by ion glow discharge, are considerably sharper and reveal more detail than those made without coating or produced by scanning electron microscopy.

Eaton, A. F.↗
NASA NTRS1976

Evaluation of flat-plate collector efficiency under controlled conditions in a solar simulator

The measured thermal efficiencies of 35 collectors tested with a solar simulator, along with the correlation equations used to generalize the data, are presented. The single correlation used is shown to apply to all the different types of collectors tested, including one with black paint and one cover, one with a selective surface coating and two covers, and an evacuated-tube collector. The test and correlation technique is also modified by using a shield so that collectors larger than the simulator test area can also be tested. This technique was verified experimentally for a shielded collector for which the collector shielded area was 31% of the solar simulator radiation area. A table lists all the collectors tested, the collector areas, and the experimental constants used to correlate the data for each collector.

Johnson, S. M.↗