Search NASA⌕ Search

SEARCH · Search NASA

Results for “TOPOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Detection of bedrock topography beneath a thin cover of alluvium using thermal remote sensing

Modeling of the annual heat flow within a thin alluvium veneer on a granitic bedrock substrate in desert environments, such as found in the southwestern United States, predicts that at certain times of the year the depth to bedrock has a measurable effect on the surface temperature if the alluvium cover is less than 2 m thick. Changes in the thickness of the alluvial cover caused by bedrock topography will produce contrasts in the surface temperature. If temperature contrasts as small as 0.1 C can be resolved, a linear topographic feature having several metres of relief buried by 1.5 m of alluvium may be visible in thermal imagery acquired during January or August in the southwestern U.S. under optimal conditions. Thermal remote sensing may provide a means for delineating some buried faults, fluvial channels, and other features of interest on buried, granitic pediment surfaces.

Nash, D. B.↗
NASA NTRS1984

Large-scale stationary and turbulent flow over topography

The contributions made to the formation of stationary features of flow over topography by linear and nonlinear dynamics were examined with an integrated quasi-geostrophic model with idealized topographic forcing. The simulation was run out to several months and generated time-averaged values which were compared with those obtained with linear theory. Linear predictions were converted to turbulent features through the addition of stationary, nonlinear thermodynamic and transient vorticity fluxes. The turbulence features matched atmospheric data on energy spectra, the direction and magnitude of energy transfers, and the spatial magnitudes involved. Transient flow transferred the majority of energy absorbed by the upscale flow and, by absorbing energy, reduced the energy of stationary flow while retaining resonance signatures. Instability was a pervasive feature of the topographically forced flow except at high wavenumbers. The results confirm that transient eddies are interactive with both asymmetric and zonal flow and cannot be adequately described by linear theory.

Vallis, G. K.↗
NASA NTRS1985

Contributions of GRM to the ocean topography experiment (TOPEX)

The permanent shape of the sea surface, the time averaged mean sea level, is comprised of: (1) an ellipsoidal component due to the mean mass of a rotating Earth; (2) spatial undulations due to the inhomogeneous distribution of mass in the Earth; and (3) spatial undulations due to permanent ocean currents. The amplitude of the three components are in the ratio 10,000 : 100 : 1 m, the first two components comprising the marine geoid, and the third being the permanent topography of the sea surface.

Stewart, R.↗
NASA NTRS1986

SAR imaging of bottom topography in the ocean: Results from an improved model

A two-space dimensional model, which is applicable to arbitrary bottom topography and wind, is applied to Seasat Revs. 762, 957, 1430, and 1473. The model includes the additional modulational effects of a long-wave field on the short Bragg waves, both in the presence of a variable current field and results compared to data. Modulations associated with other radar frequencies are also calculated under Rev. 762 conditions. It is shown that when the long-wave field effects are included, signature strength does not decrease with increasing radar frequency. The percentage enhancement due to long waves ranges from 7% for L band to 850% for K band.

Yuen, H. C.↗
NASA NTRS1987

Large scale topography of Io

To investigate the large scale topography of the Jovian satellite Io, both limb observations and stereographic techniques applied to landmarks are used. The raw data for this study consists of Voyager 1 images of Io, 800x800 arrays of picture elements each of which can take on 256 possible brightness values. In analyzing this data it was necessary to identify and locate landmarks and limb points on the raw images, remove the image distortions caused by the camera electronics and translate the corrected locations into positions relative to a reference geoid. Minimizing the uncertainty in the corrected locations is crucial to the success of this project. In the highest resolution frames, an error of a tenth of a pixel in image space location can lead to a 300 m error in true location. In the lowest resolution frames, the same error can lead to an uncertainty of several km.

Gaskell, R. W.↗
NASA NTRS1986

Global relationship between oceanic geoid and topography

The transfer function of geoid over topography as a function of wavelength is derived. The relationship between oceanic geoid and seafloor depth is analyzed. The correction of the geoid and topological data for thermal cooling of the oceanic lithosphere, sediment loading, and crustal thickening induced by volcanism under large ocean plateaus is discussed. The global residual depth and geoid anomalies are computed. The admittance and correlation between residual depth and geoid anomalies as a function of wavelength are examined.

Cazenave, A.↗
NASA NTRS1987

Global digital topography mapping using a scanning radar altimeter

The conceptual design of a Scanning Radar Altimeter system capable of collecting less than 300-m spatial and less than 3-m height resolution digital topography data for the entire globe, from an orbital platform, is presented. A 37-GHz frequency SRA system is used to achieve the requisite resolution while reducing antenna length in the along-track dimension. Near-global coverage in a short time period is obtained by scanning the antenna beam cross-track, in a swath of about 100 km. Attention is given to the algorithm that will be used to retrieve pixel height from the return waveform.

Elachi, C.↗
NASA NTRS1987

Spherical harmonic expansion of the Levitus Sea surface topography

Prior information for the stationary sea surface topography (SST) may be needed in altimetric solutions that intend to simultaneously improve the gravity field and determine the SST. For this purpose the oceanographically derived SST estimates are represented by a spherical harmonic expansion. The spherical harmonic coefficients are computed from a least squares adjustment of the data covering the majority of the oceanic regions of the world. Several tests are made to determine the optimum maximum degree of solution and the best configuration of the geometry of the data in order to obtain a solution that fits the data and also provides a good spectral representation of the SST.

Engelis, Theodossios↗
NASA NTRS1988

X-ray diffraction imaging (topography) of electroopticcrystals by synchrotron radiation

Information of special interest to crystal growers and device physicists now available from monochromatic synchrotron diffraction imaging (topography) is reviewed. Illustrations are taken from a variety of electro-optic crystals. Aspects of the detailed understanding of crystal growth processes obtainable from carefully selected samples are described. Finally, new experimental opportunities now available for exploitation are indicated.

Steiner, Bruce↗
NASA NTRS1988

Diffraction imaging (topography) with monochromatic synchrotron radiation

Structural information of special interest to crystal growers and device physicists is now available from high resolution monochromatic synchrotron diffraction imaging (topography). In the review, the importance of superior resolution in momentum transfer and in space is described, and illustrations are taken from a variety of crystals: gallium arsenide, cadmium telluride, mercuric iodide, bismuth silicon oxide, and lithium niobate. The identification and understanding of local variations in crystal growth processes are shown. Finally, new experimental opportunities now available for exploitation are indicated.

Steiner, Bruce↗
NASA NTRS1987

Characteristics of gravity waves generated by surface topography on Venus - Comparison with the VEGA Balloon results

Data from the 1985 VEGA Venus Balloon Mission indicate that the mountainous region known as Aphrodite influences atmospheric motions at balloon float altitudes near 54 km, an altitude located within the middle cloud region. It is shown that stationary gravity waves, generated by surface topography and Doppler-shifted by a wind blowing over the terrain, can propagate upward to the middle cloud layers. Under the right circumstances, waves are amplified considerably in excess of their amplification due to the decrease of density with altitude. The additional amplification is due to resonance that results from variations of static stability and mean zonal wind with altitude. Computed atmospheric propagation characteristics, combined with terrain slopes in Aphrodite estimated from Pioneer Venus radar altimeter data, can be sufficient to produce wind amplitudes at 54 km comparable to those observed by the VEGA-2 balloon as it overflew Aphrodite. The dominant waves have horizontal wavelengths of the order of several hundred kilometers.

Young, Richard E.↗
NASA NTRS1987

The evolution of topography on a comet

The evolution of cometary surface topography is presently modeled in terms of a focusing of thermal energy due to topographical concavity. The model encompasses incident sunlight, shadowing, molecular sublimation, and mutual radiative heating by the walls of a circle-segment cross section trench, which has a 'lensing' effect. After a large number of perihelion passages, the net effect of trench bottom sublimation losses will be the accentuation of topographical concavities. The comet surface sublimation, comet-splitting, and comet surface jet-formation consequences of this model are discussed.

Colwell, Joshua E.↗
NASA NTRS1988

Radii, shapes, and topography of the satellites of Uranus from limb coordinates

The present use of limb coordinates to ascertain radii, shape and local topographic characteristics for the five large Uranian satellites directly measured satellite ellipsoidal shapes, determining radii with subpixel accuracy. While Umbriel, Titania, and Oberon are spherical, Miranda and Ariel are noted to be ellipsoids whose equatorial bulges agree with previously determined mean densities. Miranda's topography exhibits substantial deformation of cratered terrain and the younger coronae, as well as uplift and complex faulting at coronae margins.

Thomas, P. C.↗
NASA NTRS1988

Large-scale topography of Io - Implications for internal structure and heat transfer

Recent stereographic methods have been applied to Voyager 1 images in order to determine the shape and large-scale topography of Io. The best triaxial figure of semiaxes of 1830.0, 1818.7, and 1815.3 kilometers is consistent with a differentiated satellite in hydrostatic equilibrium. It is suggested that many of the broad topographic swells and basins noted may be due to isostatic responses to thermal changes in the lithosphere-asthenosphere system. Results support the picture of increasing heat flow converting the basal lithosphere into a lower-density asthenosphere, resulting in isostatic uplift. It is shown that lithospheric thicknesses ranging from 5-100 km may results in elevation variations of up to 1 km.

Gaskell, Robert W.↗
NASA NTRS1988

Observations and wind-forced model simulations of the mean seasonal cycle in tropical Pacific sea surface topography

This paper quantitatively evaluates simulations of the mean seasonal cycle in the tropical Pacific Ocean, using a multiple vertical-mode version of the Busalacchi and O'Brien (1980) linear model. The period studied (1979-1981) includes several coincident oceanic and surface wind data sets, as well as a fairly regular seasonal cycle leading into the 1982-1983 El Nino. Simulated mean seasonal cycles in dynamic height and sea level are compared with observed variations in expendable bathythermograph and island tide gauge data averaged over the same period. It was found that, although all simulations show characteristic features of the mean meridional ridge-trough structure in surface topography, simulated north and south equatorial ridges at 20 deg N and 20 deg S are much higher than those observed. Only weak equatorial ridges were generated near 4 N, and none of the simulations exhibited a significant equatorial trough. These discrepancies are attributed to limitations in model physics and to the wind forcing.

Mcphaden, Michael J.↗
NASA NTRS1988

Ocean topography experiment (TOPEX) radar altimeter

A spaceflight qualified Radar Altimeter capable of achieving the TOPEX Mission measurement precision requirement of 2-centimeters, is provided and its performance (Engineering Assessment) will be evaluated after launch and continuously during its 3-year mission operational period. Information will be provided to JPL about the calibration of the TOPEX Radar Altimeter. The specifications for the required data processing algorithms which will be necessary to convert the Radar Altimeter mission telemetry data into the geophysical data will also be provided. The stringent 2 cm precision requirement for ocean topography determination from space necessitated examining existing Radar Altimeter designs for their applicability towards TOPEX. As a result, a system configuration evolved using some flight proven designs in conjunction with needed improvements which include: (1) a second frequency or channel to remove the range delay or apparent height bias caused by the electron content of the ionosphere; (2) higher transmit pulse repetition frequencies for correlation benefits at higher sea states to maintain precision; and (3) a faster microprocessor to accommodate two channels of altimetry data. Additionally, examination of past altimeter programs associated data processing algorithms was accomplished to establish the TOPEX-class Radar Altimeter data processing algorithms, and the necessary direction was outlined to begin to generate these for the TOPEX Mission.

Rossi, L. C.↗
NASA NTRS1988

Extraction of topography from side-looking satellite systems - A case study with SPOT simulation data

A simulated data set was used to evaluate techniques for extracting topography from side-looking satellite systems for an area of northwest Washington state. A negative transparency orthophotoquad was digitized at a spacing of 85 microns, resulting in an equivalent ground distance of 9.86 m between pixels and a radiometric resolution of 256 levels. A bilinear interpolation was performed on digital elevation model data to generate elevation data at a 9.86-m resolution. The nominal orbital characteristics and geometry of the SPOT satellite were convoluted with the data to produce simulated panchromatic HRV digital stereo imagery for three different orbital paths and techniques for reconstructing topographic data were developed. Analyses with the simulated HRV data and other data sets show that the method is effective.

Ungar, Stephen G.↗