Search NASA⌕ Search

SEARCH · Search NASA

Results for “TRACKING ANTENNA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Polarization mismatch errors in radio phase interferometers.

An analysis is presented which deals with the effects of polarization mismatch errors on the accuracy of a phase interferometer used for position location of unknown emitters relative to known calibration emitters. Closed-form expressions for the induced phase difference between interferometer antennas are derived for several combinations of receiving and transmitting antenna polarizations. Errors contributed by mechanical misalignment between antennas, as well as effects of power loss attributable to polarization mismatch, are also considered. The analysis leads to the conclusion that circularly polarized interferometer and transmitter antennas are best suited for the position location application, if it is assumed that polarization tracking of the interferometer antennas is not available. It is shown that a reasonable amount of ellipticity can be tolerated before the phase error becomes significant.

Muehldorf, E. I.↗
NASA NTRS1991

The TOPSAR interferometric radar topographic mapping instrument

We have augmented the NASA DC-8 Airborne Synthetic Aperture Radar (AIRSAR) instrument with a pair of C-band antennas displaced across the track to form an interferometer sensitive to topographic variations of the Earth's surface. The antennas were developed by Alenia Spazio under the sponsorship of the Italian Space Agency (ASI), and the AIRSAR instrument and modifications to it supporting TOPSAR were sponsored by NASA. A new data processor was developed at JPL for producing the topographic maps. As of May 1991, one engineering flight line over San Francisco, CA was reduced to a cartographically rectified topographic map. Analysis of the results indicates that statistical errors are in the range of 2 to 4 m, while systematic effects due to aircraft motion are in the range of 6 to 12 m. Future aircraft motion compensation algorithms should reduce the systematic variations to near zero, while the statistical errors could likely be reduced to 2 m or less with some processor improvements.

Zebker, Howard A.↗
NASA NTRS2009

GPS Navigation for the Magnetospheric Multi-Scale Mission

In 2014. NASA is scheduled to launch the Magnetospheric Multiscale Mission (MMS), a four-satellite formation designed to monitor fluctuations in the Earth's magnetosphere. This mission has two planned phases with different orbits (1? x 12Re and 1.2 x 25Re) to allow for varying science regions of interest. To minimize ground resources and to mitigate the probability of collisions between formation members, an on-board orbit determination system consisting of a Global Positioning System (GPS) receiver and crosslink transceiver was desired. Candidate sensors would be required to acquire GPS signals both below and above the constellation while spinning at three revolutions-per-minute (RPM) and exchanging state and science information among the constellation. The Intersatellite Ranging and Alarm System (IRAS), developed by Goddard Space Flight Center (GSFC) was selected to meet this challenge. IRAS leverages the eight years of development GSFC has invested in the Navigator GPS receiver and its spacecraft communication expertise, culminating in a sensor capable of absolute and relative navigation as well as intersatellite communication. The Navigator is a state-of-the-art receiver designed to acquire and track weak GPS signals down to -147dBm. This innovation allows the receiver to track both the main lobe and the much weaker side lobe signals. The Navigator's four antenna inputs and 24 tracking channels, together with customized hardware and software, allow it to seamlessly maintain visibility while rotating. Additionally, an extended Kalman filter provides autonomous, near real-time, absolute state and time estimates. The Navigator made its maiden voyage on the Space Shuttle during the Hubble Servicing Mission, and is scheduled to fly on MMS as well as the Global Precipitation Measurement Mission (GPM). Additionally, Navigator's acquisition engine will be featured in the receiver being developed for the Orion vehicle. The crosslink transceiver is a 1/4 Watt transmitter utilizing a TDMA schedule to distribute a science quality message to all constellation members every ten seconds. Additionally the system generates one-way range measurements between formation members which is used as input to the Kalman filter. In preparation for the MMS Preliminary Design Review (PDR), the Navigator was required to pass a series of Technology Readiness Level (TRL) tests to earn the necessary TRL-6 classification. The TRL-6 level is achieved by demonstrating a prototype unit in a relevant end-to-end environment. The IRAS unit was able to meet all requirements during the testing phase, and has thus been TRL-6 qualified

Bamford, William↗
NASA NTRS1997

Super-Low-Mass Spaceborne SAR Array Concepts

For Earth remote sensing applications, a synthetic aperture radar (SAR) typically employs an antenna with a fairly long along-track aperture in order to achieve the desired performance. At orbital velocities, the antenna along-track dimension is driven by a careful trade off between resolution, swath width, and available data rate and is independent of wavelength. 10 to 20 m long antennas have been flown or proposed in previous spaceborne SAR designs. To maintain an acceptable electrical flatness across this long aperture, very massive antenna support structures, weighing several hundred kilograms or more, have been used to date. For example, the fixed-beam L-band SeaSat antenna, which used a microstrip array with honeycomb substrate, had a mass of 250 Kg (including deployment mechanism). The beam-scanning L/C/X-band shuttle-based SIR-C antenna has a mass of l,800 Kg. These massive antenna systems generally require a launch vehicle with large stowage volume and heavy-payload-lift capability. To achieve good launch volume efficiency and to reduce payload weight, three super-low-mass array concepts are proposed and described here. With these new concepts, the mass of the future Earth remote sensing SAR antennas is expected to be less than 100 Kg.

Huang, J.↗
NASA NTRS1995

Residual and suppressed-carrier arraying techniques for deep-space communications

Three techniques that use carrier information from multiple antennas to enhance carrier acquisition and tracking are presented. These techniques in combination with baseband combining are analyzed and simulated for residual and suppressed-carrier modulation. It is shown that the carrier arraying using a single carrier loop technique can acquire and track the carrier even when any single antenna in the array cannot do so by itself. The carrier aiding and carrier arraying using multiple carrier loop techniques, on the other hand, are shown to lock on the carrier only when one of the array elements has sufficient margin to acquire the carrier on its own.

Shihabi, M.↗
NASA NTRS2006

Thermospheric Studies with Mars Global Surveyor

The Mars Global Surveyor spacecraft has been located in a near-circular, polar, and low-altitude mapping orbit about Mars for six years, since February 1999. The spacecraft is tracked routinely by the antennae of the Deep Space Network (DSN), using the X Band radio system of the spacecraft. These tracking data have been used for routine spacecraft navigation, and for radio science studies, such as the estimation of the static and time-varying gravity field of Mars. In this paper we describe the methodology for reduction of these data in order to estimate the Mars atmospheric density (normalized to an altitude 380 km) over half a solar cycle, where we discern the correlation of the density with the incident solar flux, and the 27-day solar rotation. The results show that the density at the MGS altitude varies from a mean of 0.7 x 10(exp -17) grams/cu cm near aphelion to a mean of 3.0 x 10(exp -17)grams/cu cm near perihelion.

Lemoine, F. G.↗
NASA NTRS1983

Phased arrays for satellites and the TDRSS antennas

The design and performance of satellite phased-array systems are examined by considering several specific antennas built for spacecraft use. Particular consideration is given to: (1) the JARED (Jammer Reduction Antenna System) antenna, and adaptive phased array which can be used to null jammer signals while providing coverage to specific user areas; (2) the algorithm used in the JARED antenna; and (3) a technique that can be used to detect and locate jammers. The antennas used by the Tracking and Data Relay Satellite System (TDRSS) are then described. A significant aspect of the TDRSS is the multiple access antenna which is a 30-element phased array, providing a single steered beam on transmit and the ability to receive data from 20 simultaneous users. Also included on the TDRSS is a mesh deployable reflector and a C-band and K-band communications system.

Imbriale, W. A.↗
NASA NTRS1998

Spacecraft Doppler Tracking as a Narrow-Band Detector of Gravitational Radiation

We discuss a filtering technique for reducing the frequency fluctuations due to the troposphere, ionosphere, and mechanical vibrations of the ground antenna in spacecraft Doppler tracking searches for gravitational radiation. This method takes advantage of the sinusoidal behavior of the transfer function to the Doppler observable of these noise sources, which displays sharp nulls at selected Fourier components.

gravitational radiation doppler tracking↗
NASA NTRS1987

Global digital topography mapping using a scanning radar altimeter

The conceptual design of a Scanning Radar Altimeter system capable of collecting less than 300-m spatial and less than 3-m height resolution digital topography data for the entire globe, from an orbital platform, is presented. A 37-GHz frequency SRA system is used to achieve the requisite resolution while reducing antenna length in the along-track dimension. Near-global coverage in a short time period is obtained by scanning the antenna beam cross-track, in a swath of about 100 km. Attention is given to the algorithm that will be used to retrieve pixel height from the return waveform.

Elachi, C.↗
NASA NTRS2016

Comparison of Atmospheric Delay Statistics from Deep Space Network Arrays and Nearby Test Interferometers

Several techniques have been explored and demonstrated that allow for greater data return on space-to-ground links. Among these techniques, arraying several smaller diameter dish antennas together is one method used in several arenas. These arrays can achieve larger effective area and gain than are available from a single larger antenna. This technique is routinely used by the NASA Deep Space Network (DSN) at 8.4 GHz where the incoming signals are much weaker than those experienced by the near-Earth satellite community. When considering arraying at much higher frequencies such as 32 GHz deep-space Ka-band, the phase alignment of the individual antenna signals is significantly disrupted by atmospheric turbulence. Since 2012, several downlink array demonstrations have been conducted using 32 GHz carrier signals emitted by the deep space probes Cassini and Kepler. Site test interferometers (STIs) that receive signals from geostationary satellites have been deployed at all three DSN tracking complexes for long-term monitoring of atmospheric delay fluctuations. In a previous DSN array demonstration study involving the Cassini spacecraft, it was shown that statistics of the adjusted STI phase fluctuations matched the statistics of concurrent array demonstration phase fluctuations. These adjustments accounted for differences in antenna separation, elevation angle and spacecraft frequencies. The STI antenna separations were about 200 m and the DSN antenna separations were about 300 m. These adjustments made use of the thick-layer turbulence model that was applicable to the Goldstone desert climate during the summer months for which the data were acquired. In this paper, we report on the results of additional array demonstrations involving the Kepler spacecraft and compare the adjusted STI phase fluctuations with those seen by a nearby two-element array of 34 m diameter antennas tracking Kepler’s 32 GHz signal at the Goldstone, California and Madrid, Spain DSN sites. We also discuss results from a demonstration using an array over a longer 12.5 km baseline. The Cassini and Kepler array demonstrations were found to validate the long term statistics acquired from several years of STI data as well as the models used to adjust the statistics for the conditions of an array. These statistics represent reliable estimates of the phase fluctuations that would be seen by an array tracking a deep space signal after applying appropriate adjustments for a given array configuration, elevation angle profile and observing frequency.

Morabito, David D.↗
NASA NTRS1991

Predictive control and estimation - State space approach

A modified output prediction procedure and a new controller design based on the predictive control law are presented. A new predictive estimator enhances system performance. The predictive controller was designed and applied to the tracking control of the NASA/JPL 70-m antenna. Simulation results show significant improvement in tracking performance over the linear quadratic controller and estimator presently in use.

Gawronski, W.↗
NASA NTRS2006

Orbiting GPS Receiver Modified to Track New L2C Signal

The L2C signal is a great step forward for civil applications of GPS, enabling high-accuracy dual-frequency measurements. Engineers from the Jet Propulsion Laboratory and ITT teamed to reprogram FPGA firmware and add tracking software on an orbiting receiver to track the new GPS L2C signal from SAC-C. SAC-C is an Argentinean science satellite and was launched in November 2000 with a BlackJack GPS receiver. This is a dual-frequency digital receiver with 48 tracking channels and four antennas. On SAC-C, it provides precise orbits, atmospheric occultation data, tests of GPS surface reflections, and serves as an orbiting test bed for new GPS development such as the L2C tracking reported here.

GPS receiver↗
NASA NTRS2017

The Sun Radio Imaging Space Experiment (SunRISE)

Radio emission from coronal mass ejections (CMEs) is a di- rect tracer of particle acceleration in the inner heliosphere and potential magnetic connections from the lower solar corona to the larger heliosphere. Energized electrons excite Langmuir waves, which convert into radio emission at the local plasma frequency, with the most intense acceleration thought to occur within 20 RS, but many aspects of this par- ticle acceleration and transport remain poorly constrained. Ground-based arrays would be quite capable of tracking the radio emission associated with CMEs, but absorption by the Earth’s ionosphere limits the frequency coverage of ground-based arrays (n > 15 MHz), which in turn limits the altitudes over which they can track the radio emission ( < 3RS). The state-of-the-art for tracking such emission from space is defined by single antennas (Wind/WAVES, Stereo/SWAVES), in which the tracking is accomplished by assuming a frequency-to-density mapping; there has been some success in triangulating the emission between the spacecraft, but considerable uncertainties remain. We describe the Sun Radio Imaging Space Experiment (Sun- RISE) mission concept: A constellation of small spacecraft in a geostationary graveyard orbit designed to localize and track radio emissions in the inner heliosphere. Each space- craft would carry a receiving system for observations be- low 25 MHz, and SunRISE would image CMEs more than a few solar radii from the Sun.

Zaslavsky, Arnaud↗
NASA NTRS1992

Sequential design of a linear quadratic controller for the deep space network antennas

A linear quadratic controller design procedure is proposed for the NASA/JPL Deep Space Network antennas. The procedure is developed for an antenna model divided into tracking and flexible subsystems. Controllers for the flexible and tracking parts are designed separately by adjusting the performance index weights. The effect of weights on system performance is a crucial property, and is analytically described in this paper. The procedure is illustrated with the control system design for the DSS 13 antenna.

Gawronski, Wodek↗