Search NASA⌕ Search

SEARCH · Search NASA

Results for “TRITIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Solar-wind tritium limit and the mixing rate of the solar atmosphere

Tritium has been measured, in Surveyor 3 samples, some of which were adjacent to those in which solar-wind-implanted He-4 had previously been measured. Little of the H-3 can be attributed to solar-wind implantation. The upper limit for the H-3/He-4 ratio in the solar wind is four times ten to the minus tenth power and corresponds to a H-3/H-1 limit of two times ten to the minus eleventh power. This limit imposes a requirement on the mixing rate in the solar atmosphere if the H-3 production rate in solar-surface nuclear reactions is greater than 160 sq cm/sec.

Fireman, E. L.↗
NASA NTRS1988

Helium-3 blankets for tritium breeding in fusion reactors

It is concluded that He-3 blankets offers considerable promise for tritium breeding in fusion reactors: good breeding potential, low operational risk, and attractive safety features. The availability of He-3 resources is the key issue for this concept. There is sufficient He-3 from decay of military stockpiles to meet the International Thermonuclear Experimental Reactor needs. Extraterrestrial sources of He-3 would be required for a fusion power economy.

Steiner, Don↗
DOE OSTI2021

Fundamental Studies of Tritium Formation and Diffusivity in Pure and Defective Zircaloy-4 Getters

Zirconium (Zr) alloys have excellent mechanical properties at high temperature and are resistant to corrosion in different environmental conditions. These alloys are used as tritium (3H or T) getters in nuclear reactors due to their low absorption cross section to thermal neutrons and excellent thermo-mechanical properties. Zr alloys have better mechanical and thermal properties than many other refractory alloys including stainless steel. After the irradiation of TPBAR by neutron flux, 3H produced during irradiation diffuses though the pellets and is captured by the getter. 3H chemically reacts with Zr metal to form metal hydride (ZrTx). Hydrides thus formed are brittle and adversely affect the mechanical and thermal properties of alloys. The lattice mismatch at the interface of alloy and metal hydrides also creates a stress that significantly reduces the alloy’s performance and operation life. Therefore, understanding the behavior of 3H and its species becomes significant as fuel burnup is increased, which leads to increase in hydrogen pickup and oxide formation.

Duan, Yuhua↗
DOE OSTI2023

Advanced Tritium Process Analytics and Optimization via a Digital Twin, SRNL-TR-2023-00550

Improving the process knowledge and understanding of TCAP can be achieved by incorporating advanced tools. This project addresses “Advanced analytics for modeling, forecasting, & optimization of the tritium refinement process” and is being applied to the TCAP process. The value of digitization and advanced analytics for TCAP data are tracking of gas mixtures & inventories is presently a manual effort that is rather cumbersome. Incorporating some automation into the data capture will reduce errors and storing data in an accessible database that can be used for tracking as well as process improvements. In addition, the database approach will enable longer term history to be maintained rather than the current practice of deleting data after six months. The digitized and automated data will allow for models to be developed for the process and will enable the forecasting and optimization.

Korinko, Paul S.↗
DOE OSTI2026

Managing Tritium in Water.

Fermilab’s program to monitor and manage low levels of tritium in surface and sewer water on the laboratory site.

Fermilab, Fermilab↗
DOE OSTI2021

First-principles studies of the concentration-dependent tritium diffusion in the zirconium hydrides with and without Sn impurity

We performed first-principles calculations to study the 3 H diffusion in the zirconium hydrides with or without Sn impurity. Our results show that the formation of Zr 3 H x becomes preferable as the 3 H concentration increases. Based on the most stable configurations of Zr 3 H x (x = 0.5, 1.0, 1.5, 2.0), we studied the interstitial 3 H diffusion with or without Sn impurity. The results show that the interstitial 3 H diffusion becomes less probable in the hydrides with a higher 3 H concentration. When introducing a substitutional Sn impurity, the diffusion barriers increase. Therefore, the substitutional Sn in the diffusion pathway hampers the 3 H diffusion in Zr hydrides.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Relative sensitivity of plastic scintillator: A comparative analysis with 60 Co gamma rays, deuterium–deuterium, and deuterium–tritium neutrons

A plastic scintillator has found extensive application in the realm of high-energy physics and national security science. Many applications in those fields often involve the simultaneous production of photons, neutrons, and charged particles, which makes the relative sensitivity information for these different radiation types important. In this study, we have adopted a multi-head detector comprised of a plastic scintillator and high gain phototubes, which provides a large dynamic range and linearity. A comparative study on the relative sensitivities of plastic scintillators was facilitated by adopting three distinct radiation calibration sources (i.e., 60 Co γ rays, DD neutrons, and DT neutrons). Neutrons from a DD source generate a comparable level of scintillation to gamma rays emitted by 60 Co (i.e., 60 Co-γ/DD-n = 0.92 ± 16%). DT neutrons induce ~3.5 times the scintillation observed with DD neutrons (i.e., DT-n/DD-n = 3.5 ± 28%). In addition, the Geant4 simulation granted us valuable insights into the relative sensitivity of the scintillator. This comparative study will provide a useful database for users in diverse applications.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Relevance of Tritium Breeder Irradiation Testing in a Fusion Prototypic Neutron Source

A fusion prototypic neutron source (FPNS) will play a fundamental role in testing and developing fusion materials that can withstand the harsh fusion environment. We conducted a thorough assessment to determine whether blanket materials would benefit from FPNS testing. Because of the cross sections for the various blanket materials, lithium-containing materials can generally be tested adequately using existing fission irradiation capabilities instead of waiting for or relying solely on future FPNS experiments. However, non-lithium blanket materials, such as beryllium multipliers and flow channel inserts, should be tested under a fusion neutron spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Isotope physics of heat and particle transport with tritium in JET-ILW type-I ELMy H-mode plasmas

As part the DTE2 campaign in the JET tokamak, we conducted a parameter scan in T and D-T complementing existing pulses in H and D. For the different main ion masses, type-I ELMy H-modes at fixed plasma current and magnetic field can have the pedestal pressure varying by a factor of 4 and the total pressure changing from <?CDATA $\beta_{\mathrm{N}} = 1.0$?> β N = 1.0 to 3.0. We investigated the pedestal and core isotope mass dependencies using this extensive data set. The pedestal shows a strong mass dependence on the density, which influences the core due to the strong coupling between both plasma regions. To better understand the causes for the observed isotope mass dependence in the pedestal, we analysed the interplay between heat and particle transport and the edge localised mode (ELM) stability. For this purpose, we developed a dynamic ELM cycle model with basic transport assumptions and a realistic neutral penetration. The temporal evolution and resulting ELM frequency introduce an additional experimental constraint that conventional quasi-stationary transport analysis cannot provide. Our model shows that a mass dependence in the ELM stability or in the transport alone cannot explain the observations. One requires a mass dependence in the ELM stability as well as one in the particle sources. The core confinement time increases with pedestal pressure for all isotope masses due to profile stiffness and electromagnetic turbulence stabilisation. Interestingly, T and D-T plasmas show an improved core confinement time compared to H and D plasmas even for matched pedestal pressures. For T, this improvement is largely due to the unique pedestal composition of higher densities and lower temperatures than H and D. With a reduced gyroBohm factor at lower temperatures, more turbulent drive in the form of steeper gradients is required to transport the same amount of heat. This picture is supported by quasilinear flux-driven modelling using TGLF -SAT2 within Astra . With the experimental boundary condition TGLF -SAT2 predicts the core profiles well for gyroBohm heat fluxes <?CDATA ${\gt}15$?> > 15 , however, overestimates the heat and particle transport closer to the turbulent threshold.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗