Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Structure, Stability, and Mobility of Small Pd Clusters on the Stoichiometric and Defective TiO2 (110) Surfaces

We report on the structure and adsorption properties of Pdn (n = 1–4) clusters supported on the rutile TiO2 (110) surfaces with the possible presence of a surface oxygen vacancy or a subsurface Ti-interstitial atom. As predicted by the density functional theory, small Pd clusters prefer to bind to the stoichiometric titania surface or at sites near subsurface Ti-interstitial atoms. The adsorption of Pd clusters changes the electronic structure of the underlying surface. For the surface with an oxygen vacancy, the charge localization and ferromagnetic spin states are found to be largely attenuated owing to the adsorption of Pd clusters. The potential energy surfaces of the Pd monomer on different types of surfaces are also reported. The process of sintering is then simulated via the Metropolis Monte Carlo method. The presence of oxygen vacancy likely leads to the dissociation of Pd clusters. On the stoichiometric surface or surface with Ti-interstitial atom, the Pd monomers tend to sinter into larger clusters, whereas the Pd dimer, trimer, and tetramer appear to be relatively stable below 600 K. This result agrees with the standard sintering model of transition metal clusters and experimental observations.

Environmental Molecular Sciences Laboratory↗

A near-field study of VO2/(100)TiO2 film and its crack-induced strain relief

Temperature-induced metal–insulator transition (MIT) in vanadium dioxide (VO2) has been under intense research interest for decades both theoretically and experimentally. Due to the complex nature of electron correlations, the underlying physics behind the MIT in VO2 has yet to be fully grasped. In this work, we utilize the fine resolution of the scattering-type scanning near-field optical microscope to investigate the MIT in an epitaxial VO2 thin film on the (100)R TiO2 substrate with mid-infrared light. Bidirectional tweed-like metal–insulator phase coexistence patterns are observed and understood under the Landau free energy paradigm. More interestingly, delayed metallic nucleation is observed near the surface cracks due to local strain relief. This research proposes ideas in investigating the temperature–pressure phase diagram and tuning the interplay between local strain and MIT in oxide thin films.

Chen, Xinzhong (ORCID:0000000261033848)↗

Defect-mediated ferromagnetism in insulating Co-doped anatase TiO2 thin films

The room temperature ferromagnetism recently discovered in transition metal doped oxides makes of them unique materials for new spintronic technologies. However, the mechanism responsible for this behavior has remained elusive. Here we use Z-contrast scanning transmission electron microscopy to image the Co and find that the magnetic phase in Co doped TiO2 films consists of a superstructure of interstitial Co atoms homogeneously distributed in the anatase lattice. Detailed analysis of the energy-loss near edge structure at the Ti L2,3 edge shows that the activation of ferromagnetism by post growth vacuum annealing involves the creation of Co - Ti3+- oxygen vacancy defect complexes. First-principles, spin-polarized density functional theory calculations confirm that these defect complexes have the lowest energy configuration and that their magnetic moment is in agreement with experimental observations.

Griffin, K. A.↗

Two Pathways for Water Interaction with Oxygen Adatoms on TiO2(110)

Scanning tunneling microscopy and density functional theory studies show that oxygen adatoms (Oa), produced during O2 exposure of reduced TiO2(110) surfaces, alter the water dissociation/recombination chemistry through two distinctive pathways. Depending on whether H2O and Oa are on the same or adjacent Ti4+ rows, Oa facilitates H2O dissociation and proton transfer to form a terminal hydroxyl pair, positioned along- or across-Ti row, respectively. The latter process has not been reported previously, and it starts from “pseudo-dissociated” state of water. In both pathways, the subsequent reverse proton transfer results in H2O recombination and statistical oxygen atom scrambling, as manifested by an apparent along- or across-row motion of Oa’s.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dielectric behavior related to TiOx phase change to TiO2 in TiOx/Al2O3 nanolaminate thin films

We previously demonstrated that TiOx/Al2O3 nanolaminates (TAO NL) exhibit abnormally high-dielectric constant k (800-1000), due to Maxwell-Wagner polarization, via charge accumulation at insulating Al2O3/semiconducting TiOx interfaces. Here, we report TAO NL dielectric properties related to TiOx phase change in TiOx (0.9 nm)/Al2O3 (0.1 nm) NL. High-resolution transmission electron microscopy shows amorphous TiOx phase change to crystalline anatase TiO2 due to free-energy minimization. The phase change induce reduction in leakage current and dielectric loss (J = 10(-2) to 10(-4) A/cm(2), tan delta = 10 to 10(-1)), still with k similar to 600 up to MHz, compared to amorphous TAO NLs.

Lee, Geunhee↗

Analyzing barium titanate TiO2 surface interactions with tert-butylphosphonic acid using density functional theory

Abstract Barium titanate (BTO) is a widely researched ferroelectric useful for energy storage. While BTO’s surface chemistry is commonly studied using density functional theory, little has been published on the TiO2 surface. Here, we determined that BTO’s surface response can be decoupled from the ferroelectric response by using a pre-optimized ferroelectric slab and allowing only the top three atomic z-layers to respond to ligand binding. Multiple favorable binding modes were identified for hydrogen, hydroxyl, water, and tert-butyl phosphonic acid on BTO’s TiO 2 surface. Of these ligands, tBuPA dominates surface binding with binding energies as low as − 2.61 eV for its nine configurations. Graphical abstract

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal

In this study, we report the influence of vanadium oxide (VO), as a photosensitive component, on the photoactivity of TiO2 nanotubes (TNTs). A series of TNTs of varying tube diameter were synthesized by the anodization of titanium foils at different voltages, while vanadium oxide was deposited on TNTs by wet chemical deposition. An improvement in the optical properties of nanotubes was observed after the deposition of vanadium oxide. An improvement in the optical properties (redshift in UV-Vis spectra) of TNTs and TNT/VO was noted. The photocatalytic activity was improved with increasing tube diameter, while it was weakened after the deposition of VO. Furthermore, photoactivity was investigated in photodiodes based on TNTs or TNT/VO and single crystals of CH3NH3PbI3. The photoelectric measurement revealed that different TNT diameters did not influence the I-V characteristic of the photodiodes, while the deposition of VO improved the photocurrent for smaller TNTs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrospun Nanofiber Dopped with TiO2 and Carbon Quantum Dots for the Photocatalytic Degradation of Antibiotics

Novel photocatalysts were synthesized through the association of carbon quantum dots (CQDs) with commercial (P25) titanium dioxide (TiO2) by sonication. The resulting TiO2/CQDs composite was then incorporated into the polyamide 66 (PA66) biopolymer nanofibers using the electrospinning technique, considering a composite nanoparticles-to-polymer ratio of 1:2 in the electrospinning precursor solution. The produced nanofibers presented suitable morphology and were tested for the photocatalytic degradation under simulated solar radiation of 10 mg L−1 of amoxicillin (AMX) and sulfadiazine (SDZ), in phosphate buffer solution (pH 8.06) and river water, using 1.5 g L−1 of photocatalyst. The presence of the photocatalyst increased the removal of AMX in phosphate buffer solution by 30 times, reducing the AMX degradation half-life time from 62 ± 1 h (without catalyst) to 1.98 ± 0.06 h. Moreover, SDZ degradation half-life time in phosphate buffer solution was reduced from 5.4 ± 0.1 h (without catalyst) to 1.87 ± 0.05 h in the presence of the photocatalyst. Furthermore, the PA66/TiO2/CQDs were also efficient in river water samples and maintained their performance in at least three cycles of SDZ photodegradation in river water. The presented results evidence that the produced photocatalyst can be a promising and sustainable solution for antibiotics’ efficient removal from water.

Silva, Valentina (ORCID:0000000285394787)↗

Interaction of Intercalated Li+ Ions with Oxygen Vacancies in Rutile TiO2

Point defects are known to affect transport properties of materials. The effect of oxygen vacancies on the diffusion of Li+ ions in rutile TiO2 is investigated using an embedded cluster method. The calculated Li+ diffusion pathway in vacancy-containing lattice is similar to that found for the ideal lattice. However, vacancies strongly modify the shape of the Li+ potential energy surface and increase the diffusion activation energies by the factor of two.

36 MATERIALS SCIENCE↗

The Rutile (110)-Water Interface: A comment on "Structure and Dynamics of Liquid Water on Rutile TiO2(110)" by L.-M. Liu, C. Zhang, G. Thornton and A. Michaelides

The (110) surface of rutile ( -TiO2) in contact with water is one of the most technologically-important and scientifically-investigated interfaces that exists. Liu and coworkers1 (hereafter Liu1) expanded on an excellent review of water-titania interfaces2, by conducting extensive static density functional theory (DFT) and DFT molecular dynamics (DFT-MD) investigations of rutile (110) using a range of cell configurations and DFT functionals. We agree with their DFT calculations of the influence of crystal slab thickness on water sorption energies, but find some of their major conclusions unwarranted or overstated, namely a.) that there is no dissociation of first-layer sorbed water at ~300K; b.) that translational diffusion of water molecules in contact with the surface approaches that of bulk liquid water ; and c.) that second layer water structuring and hydrogen bonding to surface oxygens are weak. We present published evidence not cited by Liu1 that challenge these assertions.

08 HYDROGEN↗

Local Probing of Electrochemically Induced Negative Differential Resistance in TiO2 Memristive Materials

Early stage of electroforming in TiO2 was observed by deliberately combining conductive atomic force microscopy and electrochemical strain microscopy. The negative differential resistance and the corresponding surface deformation were observed below electroforming voltages. The surface deformations induced by surface oxidation are thermodynamically stable, reversibly controlled by applying voltage bias of different polarities, and electrochemically less active.

Kim, Yunseok↗

Giant Enhancement of Hydrogen Transport in Rutile TiO2 at Low Temperatures

Measurements of the O-H and O-D vibrational lifetimes show that the room-temperature hydrogen diffusion rate in rutile TiO2 can be enhanced by nine orders of magnitude when stimulated by resonant infrared light. We find that the local oscillatory motion of the proton quickly couples to a wag-mode-assisted classical transfer process along the c-channel with a jump rate of greater than 1 THz and a barrier height of 0.2 eV. Such an increase in proton transport rate at moderate temperatures is significant for renewable energy applications ranging from hydrogen fuel cells to water splitting by photo-catalysis.

08 HYDROGEN↗

Thermal formation of silicon-doped TiO2 thin films with enhanced visible light photoelectrochemical response

Si-doped TiO{sub 2} thin films were fabricated by annealing titanium metal sheet embedded in SiO{sub 2} powders and characterized by X-ray photoemission spectroscopy (XPS) and photoelectrochemical measurements. The results showed that the content of silicon in the doped films was proportional to the annealing time and temperature. Enhanced visible light response, more negative flat band potential and higher carrier density were demonstrated by the electrochemical measurement. The technique proposed in this paper can be also applicable to fabricate other doped TiO{sub 2} based on the corresponding oxide bath.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced photocatalytic and photoelectrochemical activities of reduced TiO 2-x /BiOCl heterojunctions

A key issue to design highly efficient photoelectrodes for hydrogen production is how to prohibit the rapid carrier recombination. In order to use the visible light and reduce the recombination of electrons and holes, reduced TiO 2-x /BiOCl heterojunctions are successfully synthesized and the photoelectrodes are assembled in this work. The effects of various Bi/Ti molar ratios on the structural, morphological, optical, photoelectrochemical and photocatalytic activities of the resultant samples are investigated systematically. The TiO 2-x nanoparticles contain Ti 3+ , Ti 2+ , and oxygen vacancies (Ov), while the BiOCl nanosheets exposed {001} facet. Ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS) results indicate that the existence of Ti 3+ , Ti 2+ and Ov expand the light-response range. Linear scan voltammetry and electrochemical impedance spectroscopy results indicate that more efficient electron transportation is presented in the heterojunctions with the appropriate Bi/Ti molar ratio. Consequently, the reduced TiO 2-x /BiOCl heterojunction with the most appropriate Bi/Ti molar ratio exhibits a high photocurrent density of 0.755 mA cm -2 with photoconversion efficiency up to 0.634%, 10.5 and 22.6 times larger than that of pure TiO 2 and BiOCl. Furthermore, this heterojunction exhibit 48.38 and 12.54 times enhancement for the visible-light decomposition of rhodamine B compared with pure TiO 2 and BiOCl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗