Results for “UAM;” — Page 15

NASA NTRSDate not supplied

A Data Analysis Approach for Simulations of Urban Air Mobility Operations

For the Urban Air Mobility (UAM) industry, NASA has defined a series of UAM Maturity Levels (UML) corresponding to increasingly more complex and operationally dense UAM operations. In support of the gradual progression towards higher UML levels, NASA is currently conducting a set of UAM air traffic simulations—collectively referred to as X4. This paper describes a set of system effectiveness measures, and their associated metrics, for data analysis of X4 simulations. The descriptions, rationales, and calculation procedures for two metrics to be used in data analysis of simulation results, the number of predicted demand-capacity imbalances and the pre-departure delays, are described. Results from data analysis of one set of simulation runs are presented to demonstrate how these metrics support the assessment of performance of the system architecture for X4 simulations and the verification of experiment requirements.

Urban Air Mobility↗

NASA NTRSDate not supplied

Demand Capacity Balancing at Vertiports for Initial Strategic Conflict Management of Urban Air Mobility Operations

Demand Capacity Balancing (DCB) can be applied in strategic conflict management for safe Urban Air Mobility (UAM) operations. Even when the operational tempo is low, traffic demand can locally exceed the capacity at airspace resources like vertiports. This paper proposes a DCB algorithm to manage the UAM traffic demand strategically, given the capacity at vertiports. The DCB algorithm is evaluated with traffic scenarios at Dallas/Fort Worth urban area in terms of various metrics such as demand distribution changes, pre-departure delay, and the number of simultaneous operations in the air. With the same experiment setup, more extended studies are also conducted to investigate how the UAM flight scheduling based on the DCB algorithm is affected by various conditions that can occur in a practical UAM environment, including vertiport capacity changes, a slot size parameter in capacity constraint, differences in operational policy between operators like lead time for flight plan submission and cruise flight speed, and uncertainties in actual departure and arrival times.

Urban Air Mobility↗

NASA NTRSDate not supplied

A Data Analysis and Simulation Study of Urban Air Mobility

For the Urban Air Mobility (UAM) industry, NASA has defined a series of UAM Maturity Levels (UML) corresponding to increasingly more complex and operationally dense UAM operations. In support of the gradual progression towards higher UML levels, NASA is currently conducting a set of UAM air traffic simulations—collectively referred to as X4. This paper describes a set of system effectiveness measures, and their associated metrics, for data analysis of X4 simulations. The descriptions, rationales, and calculation procedures for two metrics to be used in data analysis of simulation results, the number of predicted demand-capacity imbalances and the pre-departure delays, are described. Results from data analysis of one set of simulation runs are presented to demonstrate how these metrics support the assessment of performance of the system architecture for X4 simulations and the verification of experiment requirements.

Urban Air Mobility↗

NASA NTRSDate not supplied

Demand Capacity Balancing at Vertiports for Urban Air Mobility

Demand Capacity Balancing (DCB) can be applied in strategic conflict management for safe Urban Air Mobility (UAM) operations. Even when the operational tempo is low, traffic demand can locally exceed the capacity at airspace resources like vertiports. This paper proposes a DCB algorithm to manage the UAM traffic demand strategically, given the capacity at vertiports. The DCB algorithm is evaluated with traffic scenarios at Dallas/Fort Worth urban area in terms of various metrics such as demand distribution changes, pre-departure delay, and the number of simultaneous operations in the air. With the same experiment setup, more extended studies are also conducted to investigate how the UAM flight scheduling based on the DCB algorithm is affected by various conditions that can occur in a practical UAM environment, including vertiport capacity changes, a slot size parameter in capacity constraint, differences in operational policy between operators like lead time for flight plan submission and cruise flight speed, and uncertainties in actual departure and arrival times.

Urban Air Mobility↗

NASA NTRSDate not supplied

Challenges in Securing the Future of Air Travel

Urban air mobility (UAM) is a concept that proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical takeoff and landing (VTOL) or short takeoff and landing (STOL) aircraft to overcome increasing surface congestion. To realize the potential of UAM, an assurance of cybersecurity is critical for public acceptance. Cybersecurity has come to the forefront highlighting the need to protect these networks and systems from cyberattacks. The growth in the development of UAM systems, and the associated data exchange and service interactions will create abundant challenges due to numerous types of cybersecurity attacks. As these threats evolve, the UAM cybersecurity capabilities must adapt to these changes as well.

UAM↗

NASA NTRS2023

A Blockchain Case Study for Urban Air Mobility Operational Intent

To realize the potential of Urban Air Mobility (UAM), an assurance of cybersecurity is critical for public acceptance. UAM is a concept that proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical takeoff and landing (VTOL) aircraft to overcome increasing surface congestion. The growth in the development of UAM systems, and the associated data exchange and service interactions will be at risk due to numerous types of cybersecurity attacks. The intent of this work is to leverage a permissioned blockchain to simulate secure data exchange and storage for the UAM operational intent use case. In this case study, two vehicle operators are operating in the same airspace. Their intent is to fly vehicles that land at a shared vertiport, securely.

Urban Air Mobility↗

NASA NTRS2023

A Blockchain Case Study for Urban Air Mobility Operational Intent

To realize the potential of Urban Air Mobility (UAM), an assurance of cybersecurity is critical for public acceptance. UAM is a concept that proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical takeoff and landing (VTOL) aircraft to overcome increasing surface congestion. The growth in the development of UAM systems, and the associated data exchange and service interactions will be at risk due to numerous types of cybersecurity attacks. The intent of this work is to leverage a permissioned blockchain to simulate secure data exchange and storage for the UAM operational intent use case.

UAM↗

NASA NTRSDate not supplied

High Density Vertiplex: Scalable Autonomous Operations Prototype Assessment Simulation

Urban Air Mobility (UAM) is a rapidly growing topic within the field of aviation because of the impact a refined ecosystem and uncrewed aerial vehicles could have on modern society, such as urban air mobility, cargo, and emergency transport. Before the UAM concept can be actualized, research is needed to understand how to integrate these new classes of vehicles and operations into the National Airspace System. One under-researched but critical piece of infrastructure required for UAM operations is Vertiport operations. Vertiports are the envisioned takeoff and landing locations for these uncrewed aerial vehicles. To accommodate the high use of the vertiport, new technologies and roles will be required for optimal use. At NASA, the High Density Vertiplex sub-project targets research into vertiports. The High Density Vertiplex team created an Urban Air Mobility ecosystem to test and evaluate different concepts and tools used to support higher density operations at vertiports. Part of the test and evaluation included the Prototype Assessment Operations simulation of highdensity operations around a vertiport to study vertiport management and vertiport operations. The research team also evaluated how the prototype Urban Air Mobility ecosystem supported fleet managers, ground control station operators, and vertiport managers in execution of nominal and off-nominal high-density operations. Results from this simulation provided insight regarding UAM ecosystem research and development and vertiport automation systems.

Small Uncrewed Aerial Vehicle (sUAS)↗

NASA NTRSDate not supplied

Best Practices for Predicting Acoustics of a Single Rotor Using the NASA RVLT Conceptual Design Toolchain

To facilitate the development of the Urban Air Mobility (UAM) market, the NASA Revolutionary Vertical Lift Technology Project has created the Conceptual Design Toolchain, a suite of tools developed and/or selected to assist rotorcraft designers in all stages of rotorcraft design. Of particular interest to the UAM noise community are the following two steps in this toolchain: comprehensive analysis and acoustic prediction. Since the UAM application is relatively new, there is a need for a systematic study on how best to utilize these codes. To this end, the current study documents best practices for using the comprehensive analysis codes, CAMRAD II and CHARM, along with the acoustic code AARON. Two single rotors are considered: i) a simple rotor and ii) a rotor that is more exemplary of what UAM designers might use. Best practices are presented for the prediction of both tonal and broadband self-noise, along with the corresponding results. The goal is to provide conceptual designers the tools to conduct accurate noise prediction using the RVLT Conceptual Design Toolchain.

Acoustics↗

NASA NTRSDate not supplied

Aircraft Design Implications for Urban Air Mobility Vehicles Performing Public Good Missions

NASA has previously designed and described set of concept aircraft to serve as reference vehicles for Urban Air Mobility (UAM), to encourage public discussion and research. These vehicles are used in this paper to quantify how suitable UAM aircraft might be for missions other than their primary commercial design missions. A set of representative public good missions are described, along with design requirements and equipage. For two of these missions, the additional weight, power, and cost to facilitate a basic vehicle which may be built or configured with the ability to perform these missions is quantified. Special layout and other considerations which may impact vehicle design are described. For aircraft designed to the NASA UAM reference mission, the addition of some meaningful public good missions causes less than 10% growth in weight and power for fossil-fueled aircraft; advanced batteryelectric powered aircraft grow by a significantly larger amount and may only be possible with relaxed requirements. Meaningful public good missions with UAM vehicles are feasible, provided that public good mission requirements are considered and incorporated in the conceptual design stage of development.

Aircraft↗

NASA NTRSDate not supplied

Large-Scale Simulation of a Distributed Sensing Network Supporting Regional Urban Air Mobility Operations

Urban Air Mobility (UAM) is set to transform transportation in densely populated regions like the San Francisco Bay Area. This paper introduces an innovative simulation approach to explore large-scale UAM scenarios, emphasizing the use of distributed sensing to enhance operational efficiency and safety. The Revolutionary Vertical Lift Technology (RVLT) model is employed as the framework for simulating complex interactions among multiple vehicles within urban landscapes. Strategically deployed ground sensor nodes enable distributed sensing, enhancing situational awareness and operational effectiveness. By integrating empirical data and geographical realism, the simulations provide a systematic analysis of the feasibility, efficiency, and safety considerations associated with UAM deployment in urban environments. Factors such as air traffic density and infrastructural requirements are thoroughly examined, offering actionable insights for policymakers and industry stakeholders. This paper aims to refine the structure and scenarios for large-scale simulations based on distributed sensing, thereby contributing to the advancement of UAM operations.

UAM↗

NASA NTRSDate not supplied

Large-Scale Simulation of a Distributed Sensing Network Supporting Regional Urban Air Mobility Operations

Urban Air Mobility (UAM) is set to transform transportation in densely populated regions like the San Francisco Bay Area. This paper introduces an innovative simulation approach to explore large-scale UAM scenarios, emphasizing the use of distributed sensing to enhance operational efficiency and safety. The Revolutionary Vertical Lift Technology (RVLT) model is employed as the framework for simulating complex interactions among multiple vehicles within urban landscapes. Strategically deployed ground sensor nodes enable distributed sensing, enhancing situational awareness and operational effectiveness. By integrating empirical data and geographical realism, the simulations provide a systematic analysis of the feasibility, efficiency, and safety considerations associated with UAM deployment in urban environments. Factors such as air traffic density and infrastructural requirements are thoroughly examined, offering actionable insights for policymakers and industry stakeholders. This paper aims to refine the structure and scenarios for large-scale simulations based on distributed sensing, thereby contributing to the advancement of UAM operations.

Aircraft Mobility↗

NASA NTRS2019

Urban Air Mobility Network and Vehicle Type - Modeling and Assessment

This paper describes exploratory modeling of an on-demand urban air mobility (UAM) network and sizing of vehicles to operate within that network. UAM seeks to improve the movement of goods and people around a metropolitan area by utilizing the airspace for transport. Aircraft sizing and overall network performance results are presented that include comparisons of battery-electric and various hybrid-electric vehicles that are fueled with diesel, jet fuel, compressed natural gas, and liquefied natural gas (LNG). Hybrid-electric propulsion systems consisting of internal combustion engine-generators, turbine-generators, and solid oxide fuel cells are explored. Ultimately, the "performance" of the UAM network over a day for each of the different vehicle types, propulsion systems, and stored energy sources is described in four parameters: 1) the average cost per seat-kilometer, which considers the costs of the energy/fuel, vehicle acquisition, insurance, maintenance, pilot, and battery replacement costs, 2) carbon dioxide emission rates associated with vehicle operations, 3) the average passenger wait time, and 4) the average load factor, i.e., the total number of seats filled with paying passengers divided by the total number of available seats. Results indicate that the "dispatch model," which determines when and where aircraft are flown around the UAM network, is critical in determining the overall network performance. This is due to the often-conflicting desires to allow passengers to depart with minimal wait time while still maintaining a high load factor to reduce operating costs. Additionally, regardless of the dispatch model, hybrid-electric aircraft powered by internal combustion engines fueled with diesel or LNG are consistently the lowest cost per seat-kilometer. Battery-electric and future technology LNG/solid oxide fuel cell aircraft produce the lowest emissions (assuming the California grid) with LNG-fueled internal combustion engine-powered hybrids producing only slightly more carbon dioxide.

Assessment↗

NASA NTRS2019

Multidisciplinary Optimization of a Turboelectric Tiltwing Urban Air Mobility Aircraft

Urban air taxis, also known as urban air mobility (UAM) vehicles, are anticipated to be an area of significant market growth in the near future. These vehicles are typically vertical take-off and landing (VTOL) designs which are capable of carrying 1 to 30 passengers in an intra-urban environment with flights of less than 50 nautical miles. Development of UAM vehicles and their integration into the airspace will be enabled by advancements in a number of areas including electrified propulsion systems, structures, acoustics, automation, and controls. However, the strong multidisciplinary interactions for these unique vehicles presents a significant new design challenge. This work describes the development of a multidisciplinary analysis and optimization environment which can be used to support the conceptual design of these UAM vehicles, using efficient gradient based optimization with analytic derivatives. The tools included in this multidisciplinary analysis model the aircraft trajectory, vehicle aerodynamics, structures, and electrified propulsion system. The multidisciplinary environment created in this research is unique in that all the physics tools are tightly integrated together, with the trajectory model directly calling the aerodynamics, structures, and propulsion models. This multidisciplinary analysis environment is then demonstrated in the design optimization of a turboelectric tiltwing UAM vehicle concept.

Hendricks, Eric S.↗

NASA NTRS2019

Exploration of Near-Term Potential Routes and Procedures for Urban Air Mobility

This paper investigates routes and procedures for Urban Air Mobility (UAM), which aims to reduce congestion on the roads and highways by offering air taxi as an alternative to driving. The routes and procedures being explored are current-day helicopter routes along with different communication procedures that are available as tools in the near-term. Three different levels of UAM traffic were evaluated in the Dallas Fort Worth (DFW) area. The current-day helicopter routes were modified to separate them from traditional traffic, and a Letter of Agreement (LOA) was introduced in some of the conditions to reduce verbal communications. We found that modifications to the routes and introduction of LOA helped increase the number of UAM flights that the controllers reported they could manage and reduce their communications, which made controller self-reported workload more operationally acceptable. However, the self-reported workload experienced by busy airport towers cannot be effectively managed via the usage of LOA and modified helicopter routes, suggesting there is an opportunity to re-think roles and responsibilities of the UAM system participants.

Verma, Savita A.↗

NASA NTRS2019

Propulsion System Optimization for a Turboelectric Tiltwing Urban Air Mobility Aircraft

An emerging potential market within the aviation industry is short, frequent air taxi flights within the urban airspace. These air taxis (also called urban air mobility or UAM vehicles) are envisioned to be vertical take-o and landing designs which are capable of carrying 1 to 15 passengers in an intra-urban environment with less than 50 nautical miles of range. Numerous vehicle conceptual designs have been proposed by various industry and government organizations to fulfill these potential missions. These concepts are enabled by recent advancements in a number of areas including propulsion and power systems. While new technologies are making these vehicles possible, this new UAM design space is large, unexplored, and multidisciplinary in nature. New challenges exist in identifying and creating optimized designs for these unique vehicles with new propulsion technologies. This work presents the development of a suite of propulsion system analysis tools, which when coupled together, can improve the multidisciplinary conceptual design and optimization of UAM vehicle propulsion systems. These analysis tools are then applied to the design optimization of a turboelectric propulsion system for a notional UAM tiltwing concept. The optimization demonstration for this vehicle shows how a tightly-coupled multidisciplinary design can be developed which considers both physical design characteristics and operating schedules. Furthermore, the results explore trade-o s in the thermal management system design and how those trade-o s impact the overall vehicle.

Hendricks, Eric S.↗

NASA NTRS2019

Urban Air Mobility Fleet Manager Gap Analysis and System Design

NASA's Urban Air Mobility (UAM) Sub-Project is engaged in research to support the introduction of air taxis into the National Airspace System. Such operations will require a range of communication, navigation, and surveillance systems. Air vehicles for UAM are under development and will initially have human pilots. Separation from other aircraft, obstacles, and weather may be a pilot responsibility or provided by an operator's ground-based systems. Eventually, air taxis may be flown from the ground or fly autonomously. There will be a need for dispatch services for UAM. This report presents a gap analysis, data and capability requirements, and workstation design concepts for the UAM dispatcher or Fleet Manager (FM) position.

Mogford, Richard↗

NASA NTRS2019

Mission Planner Algorithm for Urban Air Mobility – Initial Performance Characterization

In this paper, an initial characterization was performed of the Mission Planner algorithm developed by NASA for Urban Air Mobility (UAM) operations research. The algorithm plans conflict-free trajectories for flights to support a given set of UAM passenger trips. The UAM trips are planned in an on-demand, first-come, first-served manner, such that any given trip is subject to the constraints imposed by previously planned trips. For this analysis, the mission planning algorithm considered only the trajectory constraints from previously-planned trips in one test condition and added vertiport constraints for the second test condition. The conflict and constraint resolution strategies used by the Mission Planner were characterized by their percentage contribution to planning iterations, their percentage effectiveness in those iterations, and their contributions to the departure delay applied to each UAM trip’s flight. With the exception of the climb and descent vertical speed strategies, most strategies showed reasonable or good performance in all test scenarios. In the test condition with vertipad constraints enabled, both the total number of iterations executed, and the number of flights that required planning iterations, was reduced for all scenarios. This was the result of the natural conditioning of the traffic achieved with scheduling and the additional information available to the Mission Planner from the vertiport scheduler. The next steps for this work will include improvements to the mission planning strategies and analyses with additional constraints and under other demand scenarios.

Guerreiro, Nelson M.↗