Search NASA⌕ Search

SEARCH · Search NASA

Results for “Universal scaling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A Deterministic Interfacial Cyclic Oxidation Spalling Model: Algebraic Approximation, Descriptive Parameters, and Normalized Universal Curve - Part 2

A cyclic oxidation interfacial spalling model has been developed in Part 1. The governing equations have been simplified here by substituting a new algebraic expression for the series (Good-Smialek approximation). This produced a direct relationship between cyclic oxidation weight change and model input parameters. It also allowed for the mathematical derivation of various descriptive parameters as a function of the inputs. It is shown that the maximum in weight change varies directly with the parabolic rate constant and cycle duration and inversely with the spall fraction, all to the 1/2 power. The number of cycles to reach maximum and zero weight change vary inversely with the spall fraction, and the ratio of these cycles is exactly 1:3 for most oxides. By suitably normalizing the weight change and cycle number, it is shown that all cyclic oxidation weight change model curves can be represented by one universal expression for a given oxide scale.

Smialek, James L.↗

CIZA: The First Systematic X-Ray Search for Clusters of Galaxies Behind the Milky Way

The aim of the CIZA project (Clusters In the Zone of Avoidance) was to take the first step toward a complete X-ray census of clusters of galaxies behind the plane of the Galaxy (the absolute value of b less than or equal to 20 degrees), the historical Zone of Avoidance of optical extragalactic surveys. Finding these heavily obscured clusters in ROSAT All-Sky Survey data would allow us to: 1. Construct the first truly all-sky, statistically complete, X-ray flux limited sample of galaxy clusters; 2. Use this sample to obtain an improved measurement of the cluster dipole (both amplitude and direction); 3. Chart large-scale structure across the plane of the Milky Way as traced by galaxy clusters; 4. Identify potential massive galaxy clusters contributing to the observed large-scale flow pattern in the local universe, specifically in the region around the Great Attractor; and 5. Use least-action modelling to deduce the gravitational fields created by galaxy clusters and compare this reconstruction with the one obtained from local galaxy surveys. Our project was highly successful in demonstrating the feasibility of this undertaking and allowed substantial progress toward achieving the stated science goals.

Ebeling, Harald↗

A Cepheid Distance to NGC 4603 in the Centaurus Cluster

In an attempt to use Cepheid variables to determine the distance to the Centaurus cluster, we have obtained images of NGC 4603 with the Hubble Space Telescope for 9 epochs (totalling 24 orbits) over 14 months in the F555W filter and 2 epochs (totalling 6 orbits) in the F814W filter.

Cepheids distance redshifs large scale structure o↗

SPoRT - An End-to-End R2O Activity

Established in 2002 to demonstrate the weather and forecasting application of real-time EOS measurements, the Short-term Prediction Research and Transition (SPoRT) program has grown to be an end-to-end research to operations activity focused on the use of advanced NASA modeling and data assimilation approaches, nowcasting techniques, and unique high-resolution multispectral observational data applications from EOS satellites to improve short-term weather forecasts on a regional and local scale. SPoRT currently partners with several universities and other government agencies for access to real-time data and products, and works collaboratively with them and operational end users at 13 WFOs to develop and test the new products and capabilities in a "test-bed" mode. The test-bed simulates key aspects of the operational environment without putting constraints on the forecaster workload. Products and capabilities which show utility in the test-bed environment are then transitioned experimentally into the operational environment for further evaluation and assessment. SPoRT focuses on a suite of data and products from MODIS, AMSR-E, and AIRS on the NASA Terra and Aqua satellites, and total lightning measurements from ground-based networks. Some of the observations are assimilated into or used with various versions of the WRF model to provide supplemental forecast guidance to operational end users. SPoRT is enhancing partnerships with NOAA / NESDIS for new product development and data access to exploit the remote sensing capabilities of instruments on the NPOESS satellites to address short term weather forecasting problems. The VIIRS and CrIS instruments on the NPP and follow-on NPOESS satellites provide similar observing capabilities to the MODIS and AIRS instruments on Terra and Aqua. SPoRT will be transitioning existing and new capabilities into the AWIIPS II environment to continue the continuity of its activities.

Jedlovec, Gary J.↗

Developing Avionics Hardware and Software for Rocket Engine Testing

My summer was spent working as an intern at Kennedy Space Center in the Propulsion Avionics Branch of the NASA Engineering Directorate Avionics Division. The work that I was involved with was part of Rocket University's Project Neo, a small scale liquid rocket engine test bed. I began by learning about the layout of Neo in order to more fully understand what was required of me. I then developed software in LabView to gather and scale data from two flowmeters and integrated that code into the main control software. Next, I developed more LabView code to control an igniter circuit and integrated that into the main software, as well. Throughout the internship, I performed work that mechanics and technicians would do in order to maintain and assemble the engine.

liquid rocket↗

Optical Design of the STAR-X Telescope

Top-level science goals of the Survey and Time-domain Astrophysical Research eXplorer (STAR-X) include: investigations of most violent explosions in the universe, study of growth of black holes across cosmic time and mass scale, and measure how structure formation heats majority of baryons in the universe. To meet these goals, the field-of-view of the telescope should be about 1 square-degree, the angular resolution should be 5 arc-seconds or below across large part of the field-of-view. The on-axis effective area at 1 KeV should be about 2,000 sq cm. Payload cost and launch considerations limit the outer diameter, focal length, and mass to 1.3 meters, 5 meters, and 250 kilograms, respectively. Telescope design is based on a segmented meta-shell approach we have developed at Goddard Space Flight Center for the STAR-X telescope. The telescope shells are divided into 30-degree segments. Individual telescopes and meta-shells are nested inside each other to meet the effective area requirements in 0.5 - 6.0 KeV range. We consider Wolter-Schwarzschild, and Modified-Wolter-Schwarzschild telescope designs as basic building blocks of the nested STAR-X telescope. These designs offer an excellent resolution over a large field of views. Nested telescopes are vulnerable to stray light problems. We have designed a multi-component baffle system to eliminate direct and single-reflection light paths inside the telescopes. Large number of internal and external baffle vane structures are required to prevent stray rays from reaching the focal plane. We have developed a simple ray-trace based tool to determine the dimensions and locations of the baffles. In this paper, we present the results of our trade studies, baffle design studies, and optical performance analyses of the STAR-X telescope.

Saha, Timo T.↗

Design of the STAR-X Telescope

Top-level science goals of the Survey and Time-domain Astrophysical Research eXplorer (STAR-X) include: investigations of most violent explosions in the universe, study of growth of black holes across cosmic time and mass scale, and measure how structure formation heats majority of baryons in the universe. To meet these goals, the field-of-view of the telescope should be about 1 square-degree, the angular resolution should be 5 arc-seconds or below across large part of the field-of-view. The on-axis effective area at 1 KeV should be about 2,000 sq cm. Payload cost and launch considerations limit the outer diameter, focal length, and mass to 1.3 meters, 5 meters, and 250 kilograms, respectively. Telescope design is based on a segmented meta-shell approach we have developed at Goddard Space Flight Center for the STAR-X telescope. The telescope shells are divided into 30-degree segments. Individual telescopes and meta-shells are nested inside each other to meet the effective area requirements in 0.5 - 6.0 KeV range. We consider Wolter-Schwarzschild, and Modified-Wolter-Schwarzschild telescope designs as basic building blocks of the nested STAR-X telescope. These designs offer an excellent resolution over a large field of views. Nested telescopes are vulnerable to stray light problems. We have designed a multi-component baffle system to eliminate direct and single-reflection light paths inside the telescopes. Large number of internal and external baffle vane structures are required to prevent stray rays from reaching the focal plane. We have developed a simple ray-trace based tool to determine the dimensions and locations of the baffles. In this paper, we present the results of our trade studies, baffle design studies, and optical performance analyses of the STAR-X telescope.

Saha, Timo T.↗

The Atacama Cosmology Telescope: A CMB lensing mass map over 2100 square degrees of sky and its cross-correlation with BOSS-CMASS galaxies

We construct cosmic microwave background lensing mass maps using data from the 2014 and 2015 seasons of observations with the Atacama Cosmology Telescope (ACT). These maps cover 2100 square degrees of sky and overlap with a wide variety of optical surveys. The maps are signal dominated on large scales and have fidelity such that their correlation with the cosmic infrared background is clearly visible by eye. We also create lensing maps with thermal Sunyaev-Zel’dovich contamination removed using a novel cleaning procedure that only slightly degrades the lensing signal-to-noise ratio. The cross-spectrum between the cleaned lensing map and the BOSS CMASS galaxy sample is detected at 10-σ significance, with an amplitude of A = 1.02±0.10 relative to the Planck best-fit LCDM cosmological model with fiducial linear galaxy bias. Our measurement lays the foundation for lensing cross-correlation science with current ACT data and beyond.

gravitational lensing↗

Atacama Cosmology Telescope measurements of a large sample of candidates from the Massive and Distant Clusters of WISE Survey: Sunyaev-Zeldovich effect confirmation of MaDCoWS candidates using ACT

Context. Galaxy clusters are an important tool for cosmology, and their detection and characterization are key goals for current and future surveys. Using data from the Wide-field Infrared Survey Explorer (WISE), the Massive and Distant Clusters of WISE Survey (MaDCoWS) located 2839 significant galaxy overdensities at redshifts 0.7 . z . 1.5, which included extensive follow-up imaging from the Spitzer Space Telescope to determine cluster richnesses. Concurrently, the Atacama Cosmology Telescope (ACT) has produced large area millimeter-wave maps in three frequency bands along with a large catalog of Sunyaev-Zeldovich (SZ)-selected clusters as part of its Data Release 5 (DR5). Aims. We aim to verify and characterize MaDCoWS clusters using measurements of, or limits on, their thermal SZ effect signatures. We also use these detections to establish the scaling relation between SZ mass and the MaDCoWS-defined richness. Methods. Using the maps and cluster catalog from DR5, we explore the scaling between SZ mass and cluster richness. We do this by comparing cataloged detections and extracting individual and stacked SZ signals from the MaDCoWS cluster locations. We use complementary radio survey data from the Very Large Array, submillimeter data from Herschel, and ACT 224 GHz data to assess the impact of contaminating sources on the SZ signals from both ACT and MaDCoWS clusters. We use a hierarchical Bayesian model to fit the mass-richness scaling relation, allowing for clusters to be drawn from two populations: one, a Gaussian centered on the mass-richness relation, and the other, a Gaussian centered on zero SZ signal. Results. We find that MaDCoWS clusters have submillimeter contamination that is consistent with a gray-body spectrum, while the ACT clusters are consistent with no submillimeter emission on average. Additionally, the intrinsic radio intensities of ACT clusters are lower than those of MaDCoWS clusters, even when the ACT clusters are restricted to the same redshift range as the MaDCoWS clusters. We find the best-fit ACT SZ mass versus MaDCoWS richness scaling relation has a slope of p1 = 1.84+0.15 −0.14, where the slope is defined as M ∝ λ p1 15 and λ15 is the richness. We also find that the ACT SZ signals for a significant fraction (∼57%) of the MaDCoWS sample can statistically be described as being drawn from a noise-like distribution, indicating that the candidates are possibly dominated by low-mass and unvirialized systems that are below the mass limit of the ACT sample. Further, we note that a large portion of the optically confirmed ACT clusters located in the same volume of the sky as MaDCoWS are not selected by MaDCoWS, indicating that the MaDCoWS sample is not complete with respect to SZ selection. Finally, we find that the radio loud fraction of MaDCoWS clusters increases with richness, while we find no evidence that the submillimeter emission of the MaDCoWS clusters evolves with richness. Conclusions. We conclude that the original MaDCoWS selection function is not well defined and, as such, reiterate the MaDCoWS collaboration’s recommendation that the sample is suited for probing cluster and galaxy evolution, but not cosmological analyses. We find a best-fit mass-richness relation slope that agrees with the published MaDCoWS preliminary results. Additionally, we find that while the approximate level of infill of the ACT and MaDCoWS cluster SZ signals (1–2%) is subdominant to other sources of uncertainty for current generation experiments, characterizing and removing this bias will be critical for next-generation experiments hoping to constrain cluster masses at the sub-percent level.

large↗

Cosmological Shocks Around Galaxy Clusters: A Coherent Investigation With DES, SPT & ACT

We search for signatures of cosmological shocks in gas pressure profiles of galaxy clusters using the cluster catalogues from three surveys: the Dark Energy Survey (DES) Year 3, the South Pole Telescope (SPT) SZ survey, and the Atacama Cosmology Telescope (ACT) data releases 4, 5, and 6, and using thermal Sunyaev–Zeldovich (SZ) maps from SPT and ACT. The combined cluster sample contains around 105 clusters with mass and redshift ranges 10 13.7 200m /M ⊙ <10 15.5 and 0.1 < z < 2, and the total sky coverage of the maps is ≈15000deg 2 ⁠. We find a clear pressure deficit at R/R 200m ≈ 1.1 in SZ profiles around both ACT and SPT clusters, estimated at 6σ significance, which is qualitatively consistent with a shock-induced thermal non-equilibrium between electrons and ions. The feature is not as clearly determined in profiles around DES clusters. We verify that measurements using SPT or ACT maps are consistent across all scales, including in the deficit feature. The SZ profiles of optically selected and SZ-selected clusters are also consistent for higher mass clusters. Those of less massive, optically selected clusters are suppressed on small scales by factors of 2–5 compared to predictions, and we discuss possible interpretations of this behaviour. An oriented stacking of clusters – where the orientation is inferred from the SZ image, the brightest cluster galaxy, or the surrounding large-scale structure measured using galaxy catalogues – shows the normalization of the one-halo and two-halo terms vary with orientation. Finally, the location of the pressure deficit feature is statistically consistent with existing estimates of the splashback radius.

galaxies↗

XLSSC 122 Caught in the Act of Growing Up: Spatially Resolved SZ Observations of a z=1.98 Galaxy Cluster

Context. How protoclusters evolved from sparse galaxy overdensities to mature galaxy clusters is still not well understood. In this context, detecting and characterizing the hot intracluster medium (ICM) at high redshifts (z ∼ 2) is key to understanding how the continuous accretion from the filamentary large-scale structure and the mergers along it impact the first phases of cluster formation. Aims. We study the dynamical state and morphology of the z = 1:98 galaxy cluster XLSSC 122 with high-resolution observations (≈5″) of the ICM through the Sunyaev–Zeldovich (SZ) effect. XLSSC 122 is the highest redshift optically confirmed galaxy cluster found in an unbiased, widefield survey. Methods. Via Bayesian forward modeling, we mapped the ICM on scales from the virial radius down to the core of the cluster. To constrain such a broad range of spatial scales, we employed a new technique that jointly forward-models parametric descriptions of the pressure distribution to interferometric ACA and ALMA observations and multiband imaging data from ACT. Results. We detect the SZ effect with 11σ significance in the ALMA+ACA observations and find a flattened inner pressure profile that is consistent with a noncool core classification with a significance of ≥3σ. In contrast to the previous works, we find better agreement between the SZ effect signal and the X-ray emission as well as the cluster member distribution. Further, XLSSC 122 exhibits an excess of SZ flux in the south of the cluster where no X-ray emission is detected. By reconstructing the interferometric observations and modeling in the uv-plane, we obtain a tentative detection of an infalling group or filamentary-like structure in the southeast that is believed to boost and heat up the ICM while the density of the gas is still low. In addition to characterizing the dynamical state of the cluster, we provide an improved SZ mass estimate M500,c = 1.66−0.20+0.23 × 1014 M⊙ . Conclusions. Altogether, the observations indicate that we see XLSSC 122 in a dynamic phase of cluster formation while a large reservoir of gas is already thermalized.

large-scale structure of Universe↗

Concepts and methods for describing critical phenomena in fluids

The predictions of theoretical models for a critical-point phase transistion in fluids, namely the classical equation with third-degree critical isotherm, that with fifth-degree critical isotherm, and the lattice gas, are reviewed. The renormalization group theory of critical phenomena and the hypothesis of universality of critical behavior supported by this theory are discussed as well as the nature of gravity effects and how they affect cricital-region experimentation in fluids. The behavior of the thermodynamic properties and the correlation function is formulated in terms of scaling laws. The predictions of these scaling laws and of the hypothesis of universality of critical behavior are compared with experimental data for one-component fluids and it is indicated how the methods can be extended to describe critical phenomena in fluid mixtures.

Sengers, J. V.↗

deltaT/T limits from the UCSB South Pole degree-scale experiment and constraints on the large-scale deviations from the Hubble flow

The limits to the cosmic microwave background radiation (CBR) temperature anisotropy derived from the results of the University of California at Santa Barbara South Pole degree-scale experiment are translated into upper bounds on large-scale deviations from the Hubble flow. The lack of measurable CBR anisotropy in this experiment implies very low upper bounds upon the rms amplitude V(R) of the streaming motion within a Gaussian window of radius R: Vmax(R is greater than 4000 km/s) less than 200 km/s, and Vmax(R is greater than 7500 km/s) is less than 100 km/s. Thus, the smoothness of the CBR at about 1-2 deg and the apparent large-amplitude (about 500 km/s) deviations from pure Hubble flow at R greater than about 4000 km/s cannot be simultaneously explained in the framework of usual large-scale structure formation models based on the assumptions involved in this calculation.

Gorski, Krzysztof M.↗

Coherent structures in the universe and the adhesion model

An adhesion model is used to study the formation process of large-scale structures due to nonlinear gravitational growth of small initial fluctuations in the universe dominated by dark matter. The model is compared with 2D N-body simulations with initial power-law spectral indices n = -2, 0, +2, and various cutoffs. It is found that the adhesion model imitates the skeleton of the structure extremely well for the parameters of the initial spectra until the stage when the nonlinear scale reaches the correlation length R(phi) of the initial gravitational potential. The model explains the origin of large-scale coherent sructures, such as superpancakes and superfilaments, as a result of coherent motion of clumps due to large-scale inhomogeneities in the initial gravitational potential. It is found that clumps of mass identified in the N-body simulations correspond to several knots in the adhesion model, which influences the way of calculating the mass distribution function. The distribution functions of velocities and masses of clumps and areas of cells in the adhesion model satisfy self-similar scaling laws of the n = 2 model.

Kofman, Lev↗

NASA / NIST / FAA Technical Interchange Meeting on Computational Materials Approaches for Qualification by Analysis for Aerospace Applications

This report documents the goals, organization and outcomes of a Technical Interchange Meeting (TIM) on Computational Materials Approaches for Qualification by Analysis, co-organized by NASA, NIST and the FAA. The TIM was held at NASA Langley Research Center on January 15-16, 2020. Approximately 60 subject matter experts (SMEs) representing 8 aerospace manufacturers, 7 government organizations and 2 universities participated. Expertise of the SMEs spanned the Technology Readiness Level (TRL) scale from the low-to-mid TRL focus of government laboratories and universities to the high TRL perspective of the regulatory organizations and aerospace manufacturers. During this TIM, the future needs of the government regulators and manufacturers motivated the overall discussion and framed the input given by the participants. Hence, the key objectives of the TIM were to understand existing gaps in model-based, e.g., computational materials, processing and performance predictions for aerospace materials and components and forecast how they can be matured to support material, process and part-level qualification and certification (Q&C). The TIM focused on process-intensive metallic materials technologies, including, but not limited to, additive manufacturing. Participation was roughly evenly divided among the processing and performance tracks, suggesting that both topic areas are generally perceived as being both valuable and requiring additional investment. The output of this TIM may be used by both participating and other organizations, in part, as guidance for future national efforts on maturing computational materials capabilities for use in the Q&C of advanced metallic material systems in aerospace applications.

Edward H Glaessgen↗

Models for Galaxy halos in an open universe

The properties of simple, self-consistent infall models which embed an 'isothermal' dark halo in an open universe are presented. These models depend on one scaling parameter and two shape parameters. The first may be taken to be the circular velocity in the inner regions, and the others to be the density of the universe, Omega, and a measure, e, of the shape of orbits. These models provide a useful description of ensembles of satellite galaxies, or of binary galaxies, because they allow explicitly for the fact that such systems have orbital periods approaching the age of the universe and so cannot have a random orbital phase.

White, Simon D. M.↗

Scale covariance and G-varying cosmology. III - The /m, z/, /theta sub m, z/, /theta sub i, z/, and /N/m/, m/ tests

The Einstein gravitational equations in atomic units are fully solved for a matter-dominated universe in the context of a recently proposed scale-covariant cosmology. The magnitude-redshift relation for elliptical galaxies is studied, the evolutionary parameter used in such a study is derived, and the relation between isophotal angular diameters and redshifts is investigated, along with the relation between metric angular diameters and redshifts, the N(m)-magnitude relation for QSOs, and the magnitude-redshift relation for QSOs. Results are presented for four gauges (i.e., relations between G and the scale function beta (t)), and no contradictions are found between the proposed theory and the observational data. It is shown that only an open universe can fit the data if certain gauges suggested by a recent analysis of the time variation of the moon's period are selected and that observations made with atomic instruments do not necessarily yield geometrical parameters unless specific assumptions are made regarding the relation between atomic and gravitational dynamics.

Canuto, V. M.↗