Search NASA⌕ Search

SEARCH · Search NASA

Results for “Value function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

A Unified Fault-Tolerance Protocol

Davies and Wakerly show that Byzantine fault tolerance can be achieved by a cascade of broadcasts and middle value select functions. We present an extension of the Davies and Wakerly protocol, the unified protocol, and its proof of correctness. We prove that it satisfies validity and agreement properties for communication of exact values. We then introduce bounded communication error into the model. Inexact communication is inherent for clock synchronization protocols. We prove that validity and agreement properties hold for inexact communication, and that exact communication is a special case. As a running example, we illustrate the unified protocol using the SPIDER family of fault-tolerant architectures. In particular we demonstrate that the SPIDER interactive consistency, distributed diagnosis, and clock synchronization protocols are instances of the unified protocol.

Miner, Paul↗
DOE OSTI2019

Review of experimental photon-induced K{sub β}/K{sub α} intensity ratios

In this paper, we present a compilation of the measured photon-induced K{sub β}/K{sub α} intensity ratio values published in the literature from 1969 to 2018. In the considered period, we found about 1118 values (127 papers) for elements with 11≤Z≤96. The analysis of the distribution of these experimental data values in function of the atomic number shows that almost all the elements from {sub 11}Na to {sub 96}Cm are covered, except some isolated cases with no data or less than two data values were found. It has been observed that the most exploited targets are in the region 22≤Z≤30 and 39≤Z≤42 and include an important number of data values. A critical examination of these data using weighted average values (K{sub β}/K{sub α}){sub w} have been calculated for each element and recommended weighted values have been proposed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1991

Canonical multi-valued input Reed-Muller trees and forms

There is recently an increased interest in logic synthesis using EXOR gates. The paper introduces the fundamental concept of Orthogonal Expansion, which generalizes the ring form of the Shannon expansion to the logic with multiple-valued (mv) inputs. Based on this concept we are able to define a family of canonical tree circuits. Such circuits can be considered for binary and multiple-valued input cases. They can be multi-level (trees and DAG's) or flattened to two-level AND-EXOR circuits. Input decoders similar to those used in Sum of Products (SOP) PLA's are used in realizations of multiple-valued input functions. In the case of the binary logic the family of flattened AND-EXOR circuits includes several forms discussed by Davio and Green. For the case of the logic with multiple-valued inputs, the family of the flattened mv AND-EXOR circuits includes three expansions known from literature and two new expansions.

Perkowski, M. A.↗
NASA NTRS1988

Theoretical study of the nitrogen atom hyperfine coupling constant

The nitrogen-atom isotropic hyperfine coupling constant A(iso) is studied as a function of improvements in both the one-particle and n-particle basis sets. The study underscores the importance of diffuse basis functions. For example, the (9s 5p) primitive set of Huzinaga (1965) augmented with an even-tempered diffuse s function yields values for A(iso) that are virtually identical to an energy-optimized (23s 12p) even-tempered set. The A(iso) constant is found to converge relatively quickly with increasing l quantum numbers: d, f, and g functions are estimated to contribute 2.5 + or - 0.2, 0.4 + or - 0.1, and 0.05 + or - 0.05 MHz, respectively. Full CI calibration calculations indicate that very high levels of correlation treatment are required for quantitative results. In addition, a strong coupling is observed between the one-particle and n-particle requirements. The best result, 10.4 MHz, is in excellent agreement with the accurate experimental value of 10.4509 MHz.

Bauschlicher, Charles W., Jr.↗
DOE OSTI2019

Distributions of the Mean for Lognormally Distributed Data - 19427

In environmental sciences, a distribution of the mean is often needed for right-skewed data. For example, risk assessments are often based on distributions of the mean to obtain upper confidence limits (UCLs) for analyte concentrations, and, in probabilistic performance assessment (PPA) models, parameters are given distributions rather than deterministic values, and they are usually given distributions of their mean rather than the population distributions to account for the large spatial and temporal domains to which they are applied. How this distribution of the mean is developed depends on the characteristics of the parameter's full distribution and how the parameter relates to its use. In this presentation, I will discuss the implications of a right skew in distribution development. Parameters may vary over orders of magnitude and/or may be right-skewed. The material property of saturated hydraulic conductivity, Ks, is a prime example of such a parameter. Right-skewed parameters are often assumed to follow lognormal distributions. If X follows a lognormal distribution, then log(X) follows a normal distribution. For some right-skewed parameters, practitioners go back and forth between the two forms of the data depending on their needs. For example, it may be preferred to use the untransformed version of X in a model or equation, but it is easier to visualize the parameter values on a logarithmic scale. However, distribution development for the average value of the parameter will differ depending on whether X or log(X) is modeled. This difference is due to Jensen's Inequality, a theorem which states that the expected value of a concave function of a variable is less than or equal to the same function of the expected value of the variable; a logarithm is a concave function. In other words, the mean of log(X) is always less than or equal to the log of the mean of X and therefore the mean estimated from a distribution based on log(X) is less than or equal to the mean estimated from a distribution based on X. If a parameter is naturally considered on a log scale by subject matter experts, then distributions developed for the mean of log(X) may be more consistent with the use of the parameters in the literature than distributions developed for X. The statistical decisions of distribution development will be discussed within the context of right-skewed, lognormal data. These issues include method-of-moments versus maximum likelihood estimation of the distribution parameters and the use of bootstrapping to aid in the visualization of a distribution of the mean. The details surrounding Jensen's Inequality will be explained and visualized within the context of distribution development of a right-skewed parameter such as saturated hydraulic conductivity. (authors)

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

First-principles study of the Stark shift effect on the zero-phonon line of the NV center in diamond

Point defects in semiconductors are attractive candidates for quantum information science applications owing to their ability to act as spin-photon interface or single-photon emitters. However, the coupling between the change of dipole moment upon electronic excitation and stray electric fields in the vicinity of the defect, an effect known as Stark shift, can cause significant spectral diffusion in the emitted photons. In this work, using first principles computations, we revisit the methodology to compute the Stark shift of point defects up to the second order. The approach consists of applying an electric field on a defect in a slab and monitoring the changes in the computed zero-phonon line (i.e., difference in energy between the ground and excited state) obtained from constraining the orbital occupations (constrained-DFT). Here, we study the Stark shift of the negatively charged nitrogen-vacancy (NV) center in diamond using this slab approach. We discuss and compare two approaches to ensure a negatively charged defect in a slab and we show that converged values of the Stark shift measured by the change in dipole moment between the ground and excited states (Δ⁢μ) can be obtained. We obtain a Stark shift of Δ⁢μ = 2.68⁢D using the semilocal GGA-PBE functional and of Δ⁢μ = 2.23⁢D using the HSE hybrid functional. These values are in good agreement with experimental results. We also show that modern theory of polarization can be used on constrained-DFT to obtain Stark shifts in very good agreement with the slab computations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Objective and algorithm considerations when optimizing the number and placement of turbines in a wind power plant

Abstract. Optimizing turbine layout is a challenging problem that has been extensively researched in the literature. However, optimizing the number of turbines within a given boundary has not been studied as extensively and is a difficult problem because it introduces discrete design variables and a discontinuous design space. An essential step in performing wind power plant layout optimization is to define the objective function, or value, that is used to express what is valuable to a wind power plant developer, such as annual energy production, cost of energy, or profit. In this paper, we demonstrate the importance of selecting the appropriate objective function when optimizing a wind power plant in a land-constrained site. We optimized several different wind power plants with different wind resources and boundary sizes. Results show that the optimal number of turbines varies drastically depending on the objective function. For a simple, one-dimensional, land-based scenario, we found that a wind power plant optimized for minimal cost of energy produced just 72 % of the profit compared to the wind power plant optimized for maximum profit, which corresponded to a loss of about USD 2 million each year. This paper also compares the performance of several different optimization algorithms, including a novel repeated-sweep algorithm that we developed. We found that the performance of each algorithm depended on the number of design variables in the problem as well as the objective function.

17 WIND ENERGY↗
DOE OSTI2020

Lineage-based functional types: characterising functional diversity to enhance the representation of ecological behaviour in Land Surface Models

Process-based vegetation models attempt to represent the wide range of trait variation in biomes by grouping ecologically similar species into plant functional types (PFTs). This approach has been successful in representing many aspects of plant physiology and biophysics but struggles to capture biogeographic history and ecological dynamics that determine biome boundaries and plant distributions. Grass-dominated ecosystems are broadly distributed across all vegetated continents and harbour large functional diversity, yet most Land Surface Models (LSMs) summarise grasses into two generic PFTs based primarily on differences between temperate C 3 grasses and (sub)tropical C 4 grasses. Incorporation of species-level trait variation is an active area of research to enhance the ecological realism of PFTs, which form the basis for vegetation processes and dynamics in LSMs. Using reported measurements, we developed grass functional trait values (physiological, structural, biochemical, anatomical, phenological, and disturbance-related) of dominant lineages to improve LSM representations. In this work, our method is fundamentally different from previous efforts, as it uses phylogenetic relatedness to create lineage-based functional types (LFTs), situated between species-level trait data and PFT-level abstractions, thus providing a realistic representation of functional diversity and opening the door to the development of new vegetation models.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1971

The optimization of complex systems with respect to multiple criteria.

A difficult aspect of system optimization is the choice of a single cost function relating system parameters to the quality of the design; there are generally conflicting criteria by which the system can be evaluated. This paper discusses the problem of optimization with respect to multiple criteria, i.e., with a vector-valued cost function, without prespecifying constraints or the weighting of the criteria. The paper discusses theoretical results concerning the set of non-inferior solutions so generated and a computational algorithm for obtaining a characteristic set of non-inferior solutions.

Beeson, R. M.↗
DOE OSTI2023

Hybrid renewable energy systems: the value of storage as a function of PV-wind variability

As shares of variable renewable energy (VRE) on the electric grid increase, sources of grid flexibility will become increasingly important for maintaining the reliability and affordability of electricity supply. Lithium-ion battery energy storage has been identified as an important and cost-effective source of flexibility, both by itself and when coupled with VRE technologies like solar photovoltaics (PV) and wind. In this study, we explored the current and future value of utility-scale hybrid energy systems comprising PV, wind, and lithium-ion battery technologies (PV-wind-battery systems). Using a price-taker model with simulated hourly energy and capacity prices, we simulated the revenue-maximizing dispatch of a range of PV-wind-battery configurations across Texas, from the present through 2050. Holding PV capacity and point-of-interconnection capacity constant, we modeled configurations with varying wind-to-PV capacity ratios and battery-to-PV capacity ratios. We found that coupling PV, wind, and battery technologies allows for more effective utilization of interconnection capacity by increasing capacity factors to 60%–80%+ and capacity credits to close to 100%, depending on battery capacity. We also compared the energy and capacity values of PV-wind and PV-wind-battery systems to the corresponding stability coefficient metric, which describes the location-and configuration-specific complementarity of PV and wind resources. Our results show that the stability coefficient effectively predicts the configuration-location combinations in which a smaller battery component can provide comparable economic performance in a PV-wind-battery system (compared to a PV-battery system). These PV-wind-battery hybrids can help integrate more VRE by providing smoother, more predictable generation and greater flexibility.

14 SOLAR ENERGY↗
NASA NTRS1992

Pressure vessel flex joint

An airtight, flexible joint is disclosed for the interfacing of two pressure vessels such as between the Space Station docking tunnel and the Space Shuttle Orbiter bulkhead adapter. The joint provides for flexibility while still retaining a structural link between the two vessels required due to the loading created by the internal/external pressure differential. The joint design provides for limiting the axial load carried across the joint to a specific value, a function returned in the Orbiter/Station tunnel interface. The flex joint comprises a floating structural segment which is permanently attached to one of the pressure vessels through the use of an inflatable seal. The geometric configuration of the joint causes the tension between the vessels created by the internal gas pressure to compress the inflatable seal. The inflation pressure of the seal is kept at a value above the internal/external pressure differential of the vessels in order to maintain a controlled distance between the floating segment and pressure vessel. The inflatable seal consists of either a hollow torus-shaped flexible bladder or two rolling convoluted diaphragm seals which may be reinforced by a system of straps or fabric anchored to the hard structures. The joint acts as a flexible link to allow both angular motion and lateral displacement while it still contains the internal pressure and holds the axial tension between the vessels.

Kahn, Jon B.↗
DOE OSTI2024

Improving Predictions of Spin-Crossover Complex Properties through DFT Calculations with a Local Hybrid Functional

We conducted a study on the performance of the local hybrid exchange-correlation functional PBE0r for a set of 95 experimentally-characterized iron spin crossover (SCO) complexes. The PBE0r functional is a variant of PBE0 where the exchange correction is restricted to on-site terms formulated within the basis of local orbitals. We determine the free parameters of the PBE0r functional against experimental data and other hybrid functionals. With a Hartree-Fock (HF) exchange factor of 4%, the PBE0r functional accurately reproduces the electronic and free energy trends predicted in prior DFT studies for these 95 complexes using the B3LYP functional. Larger values of HF exchange stabilize high-spin states. The PBE0r-predicted bond lengths tend to exceed the experimental bond lengths, and bond lengths are less sensitive to HF exchange. The predicted SCO transition temperatures T 1/2 from PBE0r correlate moderately with the experimental transition temperatures, showing a slight improvement compared to the previous modB3LYP-predicted T 1/2 . Furthermore, this study suggests the PBE0r functional as computationally cost-effective and offers the possibility of simulating larger complexes with accuracy comparable to other global hybrid functionals, provided the HF exchange parameter is carefully optimized.

25 ENERGY STORAGE↗
NASA NTRS2005

Implementation of Programmatic Quality and the Impact on Safety

The purpose of this paper is to discuss the implementation of a programmatic quality assurance discipline within the International Space Station Program and the resulting impact on safety. NASA culture has continued to stress safety at the expense of quality when both are extremely important and both can equally influence the success or failure of a Program or Mission. Although safety was heavily criticized in the media after Col~imbiaa, strong case can be made that it was the failure of quality processes and quality assurance in all processes that eventually led to the Columbia accident. Consequently, it is possible to have good quality processes without safety, but it is impossible to have good safety processes without quality. The ISS Program quality assurance function was analyzed as representative of the long-term manned missions that are consistent with the President s Vision for Space Exploration. Background topics are as follows: The quality assurance organizational structure within the ISS Program and the interrelationships between various internal and external organizations. ISS Program quality roles and responsibilities with respect to internal Program Offices and other external organizations such as the Shuttle Program, JSC Directorates, NASA Headquarters, NASA Contractors, other NASA Centers, and International Partner/participants will be addressed. A detailed analysis of implemented quality assurance responsibilities and functions with respect to NASA Headquarters, the JSC S&MA Directorate, and the ISS Program will be presented. Discussions topics are as follows: A comparison of quality and safety resources in terms of staffing, training, experience, and certifications. A benchmark assessment of the lessons learned from the Columbia Accident Investigation (CAB) Report (and follow-up reports and assessments), NASA Benchmarking, and traditional quality assurance activities against ISS quality procedures and practices. The lack of a coherent operational and sustaining quality assurance strategy for long-term manned space flight. An analysis of the ISS waiver processes and the Problem Reporting and Corrective Action (PRACA) process implemented as quality functions. Impact of current ISS Program procedures and practices with regards to operational safety and risk A discussion regarding a "defense-in-depth" approach to quality functions will be provided to address the issue of "integration vs independence" with respect to the roles of Programs, NASA Centers, and NASA Headquarters. Generic recommendations are offered to address the inadequacies identified in the implementation of ISS quality assurance. A reassessment by the NASA community regarding the importance of a "quality culture" as a component within a larger "safety culture" will generate a more effective and value-added functionality that will ultimately enhance safety.

Huls, Dale Thomas↗
DOE OSTI2024

IDAES-PSE 2.6.0 Release

The Institute for the Design of Advanced Energy Systems (IDAES) Integrated Platform is a versatile computational environment offering extensive process systems engineering (PSE) capabilities for optimizing the design and operation of complex, interacting technologies and systems. IDAES enables users to efficiently search vast, complex design spaces to discover the lowest cost solutions while supporting the full process modeling lifecycle, from conceptual design to dynamic optimization and control. The extensible, open platform empowers users to create models of novel processes and rapidly develop custom analyses, workflows, and end-user applications. IDAES-PSE 2.6.0 Release Highlights Upcoming Changes IDAES will be switching to the new Pyomo solver interface in the next release. Whilst this will hopefully be a smooth transition for most users, there are a few important changes to be aware of. The new solver interface uses a different version of the IPOPT writer (“ipopt_v2”) and thus any custom configuration options you might have set for IPOPT will not carry over and will need to be reset. By default, the new Pyomo linear presolver will be activated with ipopt_v2. Whilst are working to identify any bugs in the presolver, it is possible that some edge cases will remain. IDAES will begin deploying a new set of scaling tools and APIs over the next few releases that make use of the new solver writers. The old scaling tools and APIs will remain for backward compatibility but will begin to be deprecated. New Models, Tools and Features New Intersphinx extension automatically linking Jupyter notebook examples to project documentation New end-to-end diagnostics example demonstrated on a real problem New complementarity formulation for VLE with cubic equations of state, backward compatibility for old formulation New solver interface with presolve (ipopt_v2) in support of upcoming changes to the initialization and APIs methods, with default set to ipopt to maintain backwards compatibility; this will deprecate once all examples have been updated New forecaster and parameterized bidder methods within grid integration library Updated surrogates API and examples to support Keras 3, with backwards compatibility for older formats such as TensorFlow SavedModel (TFSM) Updated costing base dictionary to include the 2023 cost year index value Updated ProcessBlock to include information on the constructing block class Updated Flowsheet Visualizer to allow visualize() method to return value and functions Bug Fixes Fixed bug in the Modular Property Framework that would cause errors when trying to use phase-based material balances with phase equilibria. Fixed bug in Modular Properties Framework that caused errors when initializing models with non-vapor-liquid phase equilibria. Fixed typos flagged by June update to crate-ci/typos and removed DMF-related exceptions Minor corrections of units of measurement handling in power plant waste/transport costing expressions, control volume material holdup expressions, and BTX property package parameters Fixed throwing >7500 numpy deprecation warnings by replacing scalar value assignment with element extraction and item iteration calls Testing and Robustness Migrated slow tests (>10s) to integration, impacting test coverage but also yielding a nearly 30% decrease in local test runtime Pinned pint to avoid issues with older supported Python versions Pinned codecov versions to avoid tokenless upload behavior with latest version Bumped extensions to version 3.4.2 to allow pointing to non-standard install location Deprecations and Removals Python 3.8 is no longer supported. The supported Python versions are 3.9 through 3.12 The Data Management Framework (DMF) is no longer supported. Importing idaes.core.dmf will cause a deprecation warning to be displayed until the next release The SOFC Keras surrogates have been removed. The current version of the SOFC surrogate model in the examples repository is a PySMO Kriging model.

AS↗
DOE OSTI2023

A data-driven method for modelling dissipation rates in stratified turbulence

We present a deep probabilistic convolutional neural network (PCNN) model for predicting local values of small-scale mixing properties in stratified turbulent flows, namely the dissipation rates of turbulent kinetic energy and density variance, $\varepsilon$ and $\chi$ . Inputs to the PCNN are vertical columns of velocity and density gradients, motivated by data typically available from microstructure profilers in the ocean. The architecture is designed to enable the model to capture several characteristic features of stratified turbulence, in particular the dependence of small-scale isotropy on the buoyancy Reynolds number $Re_b:=\varepsilon /(\nu N^2)$ , where $\nu$ is the kinematic viscosity and $N$ is the background buoyancy frequency, the correlation between suitably locally averaged density gradients and turbulence intensity and the importance of capturing the tails of the probability distribution functions of values of dissipation. Empirically modified versions of commonly used isotropic models for $\varepsilon$ and $\chi$ that depend only on vertical derivatives of density and velocity are proposed based on the asymptotic regimes $Re_b\ll 1$ and $Re_b\gg 1$ , and serve as an instructive benchmark for comparison with the data-driven approach. When trained and tested on a simulation of stratified decaying turbulence which accesses a range of turbulent regimes (associated with differing values of $Re_b$ ), the PCNN outperforms assumptions of isotropy significantly as $Re_b$ decreases, and additionally demonstrates improvements over the fitted empirical models. A differential sensitivity analysis of the PCNN facilitates a comparison with the theoretical models and provides a physical interpretation of the features enabling it to make improved predictions.

42 ENGINEERING↗
DOE OSTI2019

Surface Termination Dependent Work Function and Electronic Properties of Ti 3 C 2 T x MXene

MXenes, an emerging family of 2D transition metal carbides and nitrides, have shown promise in various applications, such as energy storage, electromagnetic interference shielding, conductive thin films, photonics, and photothermal therapy. Their metallic nature, wide range of optical absorption, and tunable surface chemistry are the key to their success in those applications. The physical properties of MXenes are known to be strongly dependent on their surface terminations. In this study, we investigated the electronic properties of Ti 3 C 2 T x for different surface terminations, as achieved by different annealing temperatures, with the help of photoelectron spectroscopy, inverse photoelectron spectroscopy, and density functional theory calculations. We find that fluorine occupies solely the face-centered cubic adsorption site, whereas oxygen initially occupies at least two different adsorption sites, followed by a rearrangement after fluorine desorption at high annealing temperatures. The measured electronic structure of Ti 3 C 2 T x showed strong dispersion of more than 1 eV, which we conclude to stem from Ti–O bonds by comparing it to calculated band structures. We further measured the work function of Ti 3 C 2 T x as a function of annealing temperature and found that it is in the range of 3.9–4.8 eV, depending on the surface composition. A comparison of the experimental work function to detailed density functional theory calculations shows that the measured value is not simply an average of the work function values of uniformly terminated Ti 3 C 2 surfaces but that the interplay between the different surface moieties and their local dipoles plays a crucial role.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Discreteness and integrality in Conformal Field Theory

Various observables in compact CFTs are required to obey positivity, discreteness, and integrality. Positivity forms the crux of the conformal bootstrap, but understanding of the abstract implications of discreteness and integrality for the space of CFTs is lacking. We systematically study these constraints in two-dimensional, non-holomorphic CFTs, making use of two main mathematical results. First, we prove a theorem constraining the behavior near the cusp of integral, vector-valued modular functions. Second, we explicitly construct non-factorizable, non-holomorphic cuspidal functions satisfying discreteness and integrality, and prove the non-existence of such functions once positivity is added. Application of these results yields several bootstrap-type bounds on OPE data of both rational and irrational CFTs, including some powerful bounds for theories with conformal manifolds, as well as insights into questions of spectral determinacy. We prove that in rational CFT, the spectrum of operator twists t ≥ c/12 is uniquely determined by its complement. Likewise, we argue that in generic CFTs, the spectrum of operator dimensions Δ > c–1/12 is uniquely determined by its complement, absent fine-tuning in a sense we articulate. Finally, we discuss implications for black hole physics and the (non-)uniqueness of a possible ensemble interpretation of AdS 3 gravity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗