Search NASA⌕ Search

SEARCH · Search NASA

Results for “Van der Waals interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Theoretical line shapes for rotational spectra of HCl in Ar

An interaction potential for HCl-Ar recently derived from spectra of van der Waals complexes (Hutson,1988) has been used to obtain converged close-coupling scattering S matrices from which pressure broadening (linewidth, line shift, and line coupling) cross sections have been computed within the Fano-Ben-Reuven formalism. Linewidths agree well with experimental data with the exception of the 0-1 line at low temperatures (an error of about 15 percent at 125 K). Line shifts, especially the largest, for the 0-1 line, are also in reasonable accord with experimental data. Line coupling is predicted to be quite small. The coupled-states molecular scattering approximation is found to be accurate except at very low collision energies. The infinite-order sudden approximations, on the other hand, is not reliable for this system. Inelastic scattering out of the spectroscopic levels accounts for only a fraction of the linewidth at thermal energies, especially in the lower rotational levels.

Green, Sheldon↗
NASA NTRS2001

A Model for Macromolecular Crystallization

Macromolecular crystallization is a complex process. involving a system which typically has 5 or more components (macromolecule, water, buffer + counter ion, and precipitant). Whereas small molecules have only several well defined contacts in the crystal lattice, macromolecules generally have 10's or even 100's of contacts between molecules. These can range from hydrogen bonds (direct or water-mediated), through van der Waals, hydrophobic, salt bridges, and ion-mediated contacts. The latter interactions are stronger and require some specificity in the molecular alignment, while the others are weaker, more prevalent, and more promiscuous, i.e., can often be readily broken and reformed between other sites. Formation of a consistent, ordered, 3D structure may be impossible in the absence of any or presence of too many strong interactions. Further complicating the process is the inherent structural asymmetry of monomeric single chain macromolecules. The process of crystal nucleation and growth involves the ordered assembly of growth units into a defined 3D lattice. We suggest that for many macromolecules, particularly those that are monomeric, this involves a preliminary solution-phase assembly process into a growth unit having some symmetry prior to addition to the lattice, recapitulating the initial stages of the nucleation process. If this model is correct then fluids and crystal growth models assuming a strictly monodisperse nutrient solution need to be revised. Experimental evidence, based upon face growth rate, AFM, and fluorescence energy transfer data, for a postulated model of the nucleation of tetragonal lysozyme crystals and how it transitions into crystal growth will be presented.

Pusey, Marc L.↗
NASA NTRS2002

A Proposed Pathway for the Nucleation and Crystal Growth of the Tetragonal Form of Lysozyme

A number of factors, the shape and charge distribution anisotropy, multiple components in the solution (buffer + counter ion, precipitant, protein, and water), conformational flexibility, and large numbers of intermolecular contacts, all serve as complicating variables in understanding the nucleation and growth mechanism for macromolecules. Intermolecular contacts include hydrogen bonds, van der Waals, hydrophobic, salt bridges, and ion-mediated contacts. The latter interactions are stronger and give specificity while the others are weaker, more prevalent, and more promiscuous, i.e., can lead to a range of possible molecular interactions. We propose that for tetragonal lysozyme, and by extension many other monomeric proteins, there is a solution-phase assembly process to form 4(sub 3) helix structures that are the basic unit for nucleation. The formation of these structures is continuous and concentration dependent. They subsequently also servc as growth units, with that process then being a recapitulation of the nucleation process. The advantages of solution phase assembly are the immediate burying of the strongest interactions, removing them from subsequent participation in the nucleation and growth process, and the introduction of symmetry into the system, which also assists in the assembly process.

Pusey, Marc L.↗
NASA NTRS2002

A Model for Tetragonal Lysozyme Crystal Nucleation and Growth

Macromolecular crystallization is a complex process, involving a system that typically has 5 or more components (macromolecule, water, buffer + counter ion, and precipitant). Whereas small molecules have only a few contacts in the crystal lattice, macromolecules generally have 10's or even 100's of contacts between molecules. These can range from hydrogen bonds (direct or water-mediated), through van der Waals, hydrophobic, salt bridges, and ion-mediated contacts. The latter interactions are stronger and require some specificity in the molecular alignment, while the others are weaker, more prevalent, and more promiscuous, i.e., can be readily broken and reformed between other sites. Formation of a consistent, ordered, 3D structure may be difficult or impossible in the absence of any or presence of too many strong interactions. Further complicating the process is the inherent structural asymmetry of monomeric (single chain) macromolecules. The process of crystal nucleation and growth involves the ordered assembly of growth units into a defined 3D lattice. We suggest that for many macromolecules, particularly those that are monomeric, this involves a preliminary solution-phase assembly process into a growth unit having some symmetry prior to addition to the lattice, recapitulating the initial stages of the nucleation process. If this model is correct then fluids and crystal growth models assuming a strictly monodisperse nutrient solution need to be revised. This model has been developed from experimental evidence based upon face growth rate, AFM, and fluorescence energy transfer data for the nucleation and growth of tetragonal lysozyme crystals.

Pusey, Marc L.↗
DOE OSTI2025

Lattice Structure and Dynamics of Sparse Molecular Crystals: OsO 4 and RuO 4

OsO 4 and RuO 4 are molecular oxides with unique tetrameric structures and rare +8 oxidation states. Accurately modeling their properties remains challenging for density functional theory (DFT) due to weak intertetramer interactions, which standard functionals fail to capture. Here, in this work, we show that the van der Waals (vdW)-corrected density functional (vdW-DF-optB86b) provides structural parameters that are much closer to experimental values than the standard generalized gradient approximation, with volume predictions that fall within the experimentally observed range. Phonon band structure analysis shows that the inclusion of vdW interactions stabilizes soft phonon modes, highlighting the importance of dispersion corrections for accurate predictions of lattice dynamics. Experimental measurements of the phonon density of states for OsO 4 , obtained via inelastic neutron scattering, demonstrate good agreement with our vdW-DF-optB86b calculations. These results validate OsO 4 and RuO 4 as valuable benchmarks for structural and vibrational calculations via vdW-corrected DFT methods and offer insights for studying the broader class of sparse molecular materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dipolar spin wave packet transport in a van der Waals antiferromagnet

Antiferromagnets are promising platforms for transduction and transmission of quantum information via magnons—the quanta of spin waves—and they offer advantages over ferromagnets in regard to dissipation, speed of response and robustness to external fields. Recently, transduction was shown in a van der Waals antiferromagnet, where strong spin-exciton coupling enables readout of the amplitude and phase of coherent magnons by photons of visible light. This discovery shifts the focus of research to transmission, specifically to exploring the non-local interactions that enable magnon wave packets to propagate. Here we demonstrate that magnon propagation is mediated by long-range dipole–dipole interaction. This coupling is an inevitable consequence of fundamental electrodynamics and, as such, will likely mediate the propagation of spin at long wavelengths in the entire class of van der Waals magnets currently under investigation. In conclusion, successfully identifying the mechanism of spin propagation provides a set of optimization rules, as well as caveats, that are essential for any future applications of these promising systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Giant Topological Hall Effect in van der Waals Heterostructures of CrTe 2 /Bi 2 Te 3

Discoveries of the interfacial topological Hall effect (THE) provide an ideal platform for exploring the physics arising from the interplay between topology and magnetism. The interfacial topological Hall effect is closely related to the Dzyaloshinskii-Moriya interaction (DMI) at an interface and topological spin textures. However, it is difficult to achieve a sizable THE in heterostructures due to the stringent constraints on the constituents of THE heterostructures, such as strong spin-orbit coupling (SOC). Here, we report the observation of a giant THE signal of 1.39 mu Omega.cm in the van der Waals heterostructures of CrTe 2 /Bi 2 Te 3 fabricated by molecular beam epitaxy, a prototype of two-dimensional (2D) ferromagnet (FM)/topological insulator (TI). This large magnitude of THE is attributed to an optimized combination of 2D ferromagnetism in CrTe 2 , strong SOC in Bi 2 Te 3 , and an atomically sharp interface. Furthermore, our work reveals CrTe 2 /Bi 2 Te 3 as a convenient platform for achieving large interfacial THE in hybrid systems, which could be utilized to develop quantum science and high-density information storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Vacancies and spin-phonon coupling in CrSi 0.8 Ge 0.1 Te 3

We report temperature-dependent Raman scattering and magnetization studies of van der Waals ferromagnetic compound CrSi 0.8 Ge 0.1 Te 3 . Magnetic susceptibility measurements revealed dominant ferromagnetic interactions below T C which shift to the lower values due to the presence of vacancies. A Raman active mode, additional to the ones predicted by symmetry in the parent compounds, has been observed. This A g symmetry mode most likely emerges as a consequence of the atomic vacancies on Si/Ge site. Presence of the strong spin–phonon coupling at temperature around 210 K is indicated by deviations from conventional phonon self-energy temperature dependence of all analysed modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Spin Waves and Magnetic Exchange Hamiltonian in CrSBr

Abstract CrSBr is an air‐stable two‐dimensional (2D) van der Waals semiconducting magnet with great technological promise, but its atomic‐scale magnetic interactions—crucial information for high‐frequency switching—are poorly understood. An experimental study is presented to determine the CrSBr magnetic exchange Hamiltonian and bulk magnon spectrum. The A ‐type antiferromagnetic order using single crystal neutron diffraction is confirmed here. The magnon dispersions are also measured using inelastic neutron scattering and rigorously fit the excitation modes to a spin wave model. The magnon spectrum is well described by an intra‐plane ferromagnetic Heisenberg exchange model with seven nearest in‐plane exchanges. This fitted exchange Hamiltonian enables theoretical predictions of CrSBr behavior: as one example, the fitted Hamiltonian is used to predict the presence of chiral magnon edge modes with a spin‐orbit enhanced CrSBr heterostructure.

2D materials↗
NASA NTRS1996

Relationship Between Equilibrium Forms of Lysozyme Crystals and Precipitant Anions

Molecular forces, such as electrostatic, hydrophobic, van der Waals and steric forces, are known to be important in determining protein interactions. These forces are affected by the solution conditions and changing the pH, temperature or the ionic strength of the solution can sharply affect protein interactions. Several investigations of protein crystallization have shown that this process is also strongly dependent on solution conditions. As the ionic strength of the solution is increased, the initially soluble protein may either crystallize or form an amorphous precipitate at high ionic strengths. Studies done on the model protein hen egg white lysozyme have shown that different crystal forms can be easily and reproducibly obtained, depending primarily on the anion used to desolubilize the protein. In this study we employ pyranine to probe the effect of various anions on the water structure. Additionally, lysozyme crystallization was carried out at these conditions and the crystal form was determined by X-ray crystallography. The goal of the study was to understand the physico-chemical basis for the effect of changing the anion concentration on the equilibrium form of lysozyme crystals. It will also verify the hypothesis that the anions, by altering the bulk water structure in the crystallizing solutions, alter the surface energy of the between the crystal faces and the solution and, consequently, the equilibrium form of the crystals.

Nadarajah, Arunan↗
NASA NTRS2001

Computer Simulation of the Forces Acting on the Polystyrene Probe Submerged into the Succinonitrile Near Phase Transition

Modeling approach to simulate both mesoscale and microscopic forces acting in a typical AFM experiment is presented. At mesoscale level interaction between the cantilever tip and the sample surface is primarily described by the balance of attractive Van der Waals and repulsive forces. The model of cantilever oscillations is applicable to both non-contact and "tapping" AFM. This model can be farther enhanced to describe nanoparticle manipulation by cantilever. At microscopic level tip contamination and details of tip-surface interaction can be simulated using molecular dynamics approach. Integration of mesoscale model with molecular dynamic model is discussed.

Bune, Andris V.↗
DOE OSTI2020

Reactivity descriptors in acid catalysis: acid strength, proton affinity and host–guest interactions

Brønsted acids mediate chemical transformations via proton transfer to bound species and interactions between the conjugate anion and bound cationic intermediates and transition states that are also stabilized by van der Waals forces within voids of molecular dimensions in inorganic hosts. This Feature Article describes the relevant descriptors of reactivity in terms of the properties of acids and molecules that determine their ability to donate and accept protons and to reorganize their respective charges to optimize their interactions at bound states. The deprotonation energy (DPE) of the acids and the protonation energy (Eprot) of the gaseous analogs of bound intermediates and transition states reflect their respective properties as species present at non-interacting distances. These properties accurately describe the reactivity of acids of a given type, such as polyoxometalates (POM) with a given type of addenda atom but different central atoms and heterosilicates, for different families of reactions. They do not fully capture, however, differences among acid types (e.g., Mo and W POM, heterosilicates, mineral acids) for diverse types of chemical transformations (e.g., elimination, isomerization, dimerization, condensation). The incompleteness of such descriptors reflects their inability to describe how protonated molecular species and conjugate anions restructure their respective charges when present as a binding pair at interacting distances. Such interaction energies represent electrostatic forces that depend on charge distributions in the cations and anions and the ability to reorganize the distributions to maximize the interactions. In the case of deprotonation, the electrostatic and charge reorganization components of DPE for various acids solely reflect the ability of the conjugate anion to accept and distribute the negative charge, a characteristic unique of each type of solid acid and specifically of the composition of its extended conjugate anion framework. The energy required to accept and rearrange the positive charge in bound intermediates and transition states reflects, in turn, their respective ability to recover the ionic and covalent components of DPE, the energy required to detach proton from conjugate anions. The DPE components and the recovery fractions together lead to a modified DPE, which captures only the part of DPE that remains unrecovered by the ion-pair interactions at bound intermediates and transition states, as the unifying descriptor for broad families of acids and reactions. The electrostatic and charge reorganization energies involved in these general descriptors are placed in historical context by assessing their connections to the heuristics of hard–soft acid–base displacements. Further development of these concepts requires benchmarking and extension of electrostatic and reorganization components of energies for a more diverse set of reaction types and acid families and advancement of methods for more efficient calculations of electrostatic interactions. Reactivity descriptors must also account for dispersive interactions between host cavities and guest molecules, requiring a framework analogous to the one described here for ion-pair interactions; these dispersive interactions depend on the fit between their shapes and sizes as well as their ‘‘structural stiffness’’ that determines the ability to modify the shapes of molecules and voids to minimize free energy. Entropy considerations and estimates of their dependence on properties of catalysts and molecules are also required for accurately determining Gibbs free energies that ultimately determine reaction rates.

Deshlahra, Prashant↗
NASA NTRS2001

Computer Simulation of the Forces Acting on a Submerged Polystyrene Probe as it Approaches the Succinonitrile Melt-Solid Interface

A Modeling approach to simulate both mesoscale and microscopic forces acting in a typical AFM experiment is presented. A mesoscale level interaction between the cantilever tip and the sample surface is primarily described by the balance of attractive Van der Waals and repulsive forces. Ultimately, the goal is to measure the forces between a particle and the crystal-melt interface. Two modes of AFM operation are considered in this paper - a stationary and a "tapping" one. The continuous mechanics approach to model tip-surface interaction is presented. At microscopic levels, tip contamination and details of tip-surface interaction are modeled using a molecular dynamics approach for the case of polystyrene - succinonitrile contact. Integration of the mesoscale model with a molecular dynamic model is discussed.

Bune, Andris V.↗
DOE OSTI2024

Time-of-flight detection of terahertz phonon-polariton

A polariton is a fundamental quasiparticle that arises from strong light-matter interaction and as such has attracted wide scientific and practical interest. When light is strongly coupled to the crystal lattice, it gives rise to phonon-polaritons (PPs), which have been proven useful in the dynamical manipulation of quantum materials and the advancement of terahertz technologies. Yet, current detection and characterization methods of polaritons are still limited. Traditional techniques such as Raman or transient grating either rely on fine-tuning of external parameters or complex phase extraction techniques. To overcome these inherent limitations, we propose and demonstrate a technique based on a time-of-flight measurement of PPs. We resonantly launch broadband PPs with intense terahertz fields and measure the time-of-flight of each spectral component with time-resolved second harmonic generation. The time-of-flight information, combined with the PP attenuation, enables us to resolve the real and imaginary parts of the PP dispersion relation. We demonstrate this technique in the van der Waals magnets NiI 2 and MnPS 3 and reveal a hidden magnon-phonon interaction. We believe that this approach will unlock new opportunities for studying polaritons across diverse material systems and enhance our understanding of strong light-matter interaction.

condensed-matter physics↗
DOE OSTI2023

Modeling phonons in nanomaterials

The vibrational properties of nanomaterials play fundamentally important roles in determining their stability and various functionalities, from rippling of otherwise flat two-dimensional (2D) monolayers to the extreme thermal transport behaviors observed in one-dimensional (1D) and 2D carbon-based systems. Here we discuss modeling efforts to understand how phonons in lower dimensional materials differ from those in bulk, and how these behaviors manifest in their unusual properties. In particular, this chapter gives a heavy focus to calculations of phonon dynamics, interactions, and lattice thermal transport in 1D chains and nanotubes, 2D monolayers, and van der Waals coupled bulk materials from first principles methods. This chapter will discuss important phonon calculation details related to nanomaterials with examples and discussions providing both historical and modern perspectives.

Lindsay, Lucas↗
DOE OSTI2026

Structural Phase Transitions in the van der Waals Ferromagnets Fe x Pd y Te 2

Two-dimensional van der Waals (vdW) magnets are attracting significant attention, both as platforms for studying fundamental magnetic interactions and for the exciting possibility of utilizing them as building blocks in devices and heterostructures, which may lead to new physical phenomena and functionalities. Here, we provide a detailed study of the crystal structure and physical properties of the recently discovered vdW ferromagnet FePd 2 Te 2 . We find this compound has a relatively wide width of formation, and grow single crystals with compositions Fe x Pd y Te 2 where x ranges from 0.9 to 1.1 and y from 1.8 to 2.5, respectively. Temperature-dependent X-ray diffraction and transport measurements reveal that a first-order structural transition occurs in the range of T = 360–420 K, where the critical temperature, modulation wave vector, and corresponding room-temperature crystal structures all depend on chemical composition. Above the transition, the compounds with Pd fraction y > 2 adopt a disordered derivative of the tetragonal FeTe structure, with the Fe layer showing mixed Fe/Pd occupancy and the extra Pd atoms partially occupying interstitial sites. Below 370 K, the structure is incommensurately modulated, likely associated with the complex ordering of Pd/Fe atoms in the metal layers or the interstitial Pd in the vdW gaps. For y < 2, the composition Fe 1.1 Pd 1.8 Te 2 has monoclinic symmetry at room temperature that is consistent with the reported structure of FePd 2 Te 2 . This phase undergoes a structural transition at 420 K for which the high temperature structure is yet to be determined; however, based on the similarities with the y > 2 compounds, we speculate that its T > 420 K structure is also tetragonal. Importantly, the high temperature, symmetry-breaking structural transition observed here provides a likely explanation for the origin of the structural domains previously observed in FePd 2 Te 2 . All compounds investigated in the Fe x Pd y Te 2 series show metallic behavior, with magnetic characterization indicating that they are easy-plane, hard, ferromagnets with T C spanning 98–180 K. Both the critical temperature for the structural transition and the Curie temperature are moderately suppressed with increasing Pd fraction y and corresponding decreasing Fe fraction x, indicating that synthetic control over x and y paves way for the further exploration of these compounds.

crystal structure↗
DOE OSTI2025

Magnetically Tunable Polariton Cavities in van der Waals Heterostructures

Nanophotonic cavities are the foundation for a broad spectrum of applications, including quantum sensing, on-chip communication, and cavity quantum electrodynamics. In van der Waals (vdW) materials, these cavities can harness polaritons, which are quasiparticles emerging from photon interactions with excitons, plasmons, or phonons that are confined in microscopic sample flakes. Hybrid phonon–plasmon cavities leverage the long lifetimes of phonons and good tunability of plasmons, but their reconfigurability remains fundamentally limited. Here, in this work, we introduce a magnetic-field-tuning mechanism for polaritonic cavities in a vdW heterostructure. Specifically, we demonstrate that the primary Landau transition in magnetized charge-neutral graphene can be harvested for controlling polaritonic cavity modes in a graphene-based phononic heterostructure. Additionally, we predict a magnetic-field-induced topological transition in the polariton isofrequency contour, causing a nontrivial cavity mode profile redistribution. Our study underscores the versatility of Landau-based nanophotonic cavities, offering new paradigms for the design and manipulation of light–matter interactions at the nanoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tunable room-temperature ferromagnetism in Co-doped two-dimensional van der Waals ZnO

The recent discovery of ferromagnetism in two-dimensional van der Waals crystals has provoked a surge of interest in the exploration of fundamental spin interaction in reduced dimensions. However, existing material candidates have several limitations, notably lacking intrinsic room-temperature ferromagnetic order and air stability. Here, motivated by the anomalously high Curie temperature observed in bulk diluted magnetic oxides, we demonstrate room-temperature ferromagnetism in Co-doped graphene-like Zinc Oxide, a chemically stable layered material in air, down to single atom thickness. Through the magneto-optic Kerr effect, superconducting quantum interference device and X-ray magnetic circular dichroism measurements, we observe clear evidences of spontaneous magnetization in such exotic material systems at room temperature and above. Transmission electron microscopy and atomic force microscopy results explicitly exclude the existence of metallic Co or cobalt oxides clusters. X-ray characterizations reveal that the substitutional Co atoms form Co 2+ states in the graphitic lattice of ZnO. By varying the Co doping level, we observe transitions between paramagnetic, ferromagnetic and less ordered phases due to the interplay between impurity-band-exchange and super-exchange interactions. Our discovery opens another path to 2D ferromagnetism at room temperature with the advantage of exceptional tunability and robustness.

36 MATERIALS SCIENCE↗