Search NASA⌕ Search

SEARCH · Search NASA

Results for “Waveguide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Schottky Heterodyne Receivers With Full Waveguide Bandwidth

Compact THz receivers with broad bandwidth and low noise have been developed for the frequency range from 100 GHz to 1 THz. These receivers meet the requirements for high-resolution spectroscopic studies of planetary atmospheres (including the Earth s) from spacecraft, as well as airborne and balloon platforms. The ongoing research is significant not only for the development of Schottky mixers, but also for the creation of a receiver system, including the LO chain. The new receivers meet the goals of high sensitivity, compact size, low total power requirement, and operation across complete waveguide bands. The exceptional performance makes these receivers ideal for the broader range of scientific and commercial applications. These include the extension of sophisticated test and measurement equipment to 1 THz and the development of low-cost imaging systems for security applications and industrial process monitoring. As a particular example, a WR-1.9SHM (400-600 GHz) has been developed (see Figure 1), with state-of-the-art noise temperature ranging from 1,000-1,800 K (DSB) over the full waveguide band. Also, a Vector Network Analyzer extender has been developed (see Figure 2) for the WR1.5 waveguide band (500 750 GHz) with 100-dB dynamic range.

Hesler, Jeffrey↗
NASA NTRS2010

Photonic Choke-Joints for Dual-Polarization Waveguides

Photonic choke joint (PCJ) structures for dual-polarization waveguides have been investigated for use in device and component packaging. This interface enables the realization of a high performance non-contacting waveguide joint without degrading the in-band signal propagation properties. The choke properties of two tiling approaches, symmetric square Cartesian and octagonal quasi-crystal lattices of metallic posts, are explored and optimal PCJ design parameters are presented. For each of these schemes, the experimental results for structures with finite tilings demonstrate near ideal transmission and reflection performance over a full waveguide band.

Wollack, Edward J.↗
NASA NTRS2003

Correcting for Beam Aberrations in a Beam-Waveguide Antenna

A method for correcting the aim of a beam-waveguide microwave antenna compensates for the beam aberration that occurs during radio tracking of a target that has a component of velocity transverse to the line of sight from the tracking station. The method was devised primarily for use in tracking of distant target spacecraft by large terrestrial beam-waveguide antennas of NASA's Deep Space Network (DSN). The method should also be adaptable to tracking, by other beam-waveguide antennas, of targets that move with large transverse velocities at large distances from the antennas.

Franco, Manuel↗
NASA NTRS2011

Cup waveguide antenna with integrated polarizer and OMT

A cup waveguide antenna with integrated polarizer and OMT for simultaneously communicating left and right hand circularly polarized electromagnetic waves is adjustable to obtain efficient propagation and reception of electromagnetic waves. The antenna includes a circular waveguide having an orthomode transducer utilizing first and second pins longitudinally spaced apart and oriented orthogonally with respect to each other. Six radially-oriented adjustable polarizer screws extend from the exterior to the interior of the waveguide. A septum intermediate the first and second pins is aligned with the first pin. Adjustment of the polarizer screws enables maximized propagation of and/or response to left hand circularly polarized electromagnetic waves by the first pin while simultaneously enabling maximized propagation of and/or response to right hand circularly polarized electromagnetic waves by the second pin.

Acosta, Roberto J.↗
NASA NTRS2012

Glass Solder Approach for Robust, Low-Loss, Fiber-to-Waveguide Coupling

The key advantages of this approach include the fact that the index of interface glass (such as Pb glass n = 1.66) greatly reduces Fresnel losses at the fiber-to-waveguide interface, resulting in lower optical losses. A contiguous structure cannot be misaligned and readily lends itself for use on aircraft or space operation. The epoxy-free, fiber-to-waveguide interface provides an optically pure, sealed interface for low-loss, highpower coupling. Proof of concept of this approach has included successful attachment of the low-melting-temperature glass to the x-y plane of the crystal, successful attachment of the low-meltingtemperature glass to the end face of a standard SMF (single-mode fiber), and successful attachment of a wetted lowmelting- temperature glass SMF to the end face of a KTP crystal. There are many photonic components on the market whose performance and robustness could benefit from this coupling approach once fully developed. It can be used in a variety of fibercoupled waveguide-based components, such as frequency conversion modules, and amplitude and phase modulators. A robust, epoxy-free, contiguous optical interface lends itself to components that require low-loss, high-optical-power handling capability, and good performance in adverse environments such as flight or space operation.

McNeil, Shirley↗
NASA NTRS2012

Ka-Band Waveguide Three-Way Serial Combiner for MMIC Amplifiers

In this innovation, the three-way combiner consists internally of two branch-line hybrids that are connected in series by a short length of waveguide. Each branch-line hybrid is designed to combine input signals that are in phase with an amplitude ratio of two. The combiner is constructed in an E-plane split-block arrangement and is precision machined from blocks of aluminum with standard WR-28 waveguide ports. The port impedances of the combiner are matched to that of a standard WR-28 waveguide. The component parts include the power combiner and the MMIC (monolithic microwave integrated circuit) power amplifiers (PAs). The three-way series power combiner is a six-port device. For basic operation, power that enters ports 3, 5, and 6 is combined in phase and appears at port 1. Ports 2 and 4 are isolated ports. The application of the three-way combiner for combining three PAs with unequal output powers was demonstrated. NASA requires narrow-band solid-state power amplifiers (SSPAs) at Ka-band frequencies with output power in the range of 3 to 5 W for radio or gravity science experiments. In addition, NASA also requires wideband, high-efficiency SSPAs at Ka-band frequencies with output power in the range of 5 to 15 W for high-data-rate communications from deep space to Earth. The three-way power combiner is designed to operate over the frequency band of 31.8 to 32.3 GHz, which is NASA s deep-space frequency band.

Wintucky, Edwin G.↗
NASA NTRS2012

Fabrication of Silicon Backshorts with Improved Out-of-Band Rejection for Waveguide-Coupled Superconducting Detectors

The Cosmology Large Angular Scale Surveyor (CLASS) is a ground-based instrument that will measure the polarization of the cosmic microqave background to search for gravitational waves form a posited epoch of inflation early in the universe's history. This measurement will require integration of superconducting transition-edge sensors with microwave waveguide inputs with good conrol of systematic errors, such as unwanted coupling to stray signals at frequencies outside of a precisely defined microwave band. To address these needs we will present work on the fabrication of silicon quarter-wave backshorts for the CLASS 40GHz focal plane. The 40GHz backshort consists of three degeneratively doped silicon wafers. Two spacer wafers are micromachined with through wafer vins to provide a 2.0mm long square waveguide. The third wafer acts as the backshort cap. The three wafers are bonded at the wafer level by Au-Au thermal compression bonding then aligned and flip chip bonded to the CLASS detector at the chip level. The micromachining techniques used have been optimized to create high aspect ratio waveguides, silicon pillars, and relief trenches with the goal of providing improved out of band signal rejection. We will discuss the fabrication of integrated CLASS superconducting detectors with silicon quarter wave backshorts and present current measurement results.

Crowe, Erik J.↗
NASA NTRS2014

Photonic Choke-Joints for Dual Polarization Waveguides

A waveguide structure for a dual polarization waveguide includes a first flange member, a second flange member, and a waveguide member disposed in each of the first flange member and second flange member. The first flange member and the second flange member are configured to be coupled together in a spaced-apart relationship separated by a gap. The first flange member has a substantially smooth surface, and the second flange member has an array of two-dimensional pillar structures formed therein.

Wollack, Edward J.↗
NASA NTRS2016

A Cryogenic Waveguide Mount for Microstrip Circuit and Material Characterization

A waveguide split-block fixture used in the characterization of thin-film superconducting planar circuitry at millimeter wavelengths is described in detail. The test fixture is realized from a pair of mode converters, which transition from rectangular-waveguide to on-chip microstrip-line signal propagation via a stepped ridge-guide impedance transformer. The observed performance of the W-band package at 4.2K has a maximum in-band transmission ripple of 2dB between 1.53 and 1.89 times the waveguide cutoff frequency. This metrology approach enables the characterization of superconducting microstrip test structures as a function temperature and frequency. The limitations of the method are discussed and representative data for superconducting Nb and NbTiN thin film microstrip resonators on single-crystal Si dielectric substrates are presented.

U-yen, Kongpop↗
NASA NTRS2016

A Cryogenic Waveguide Mount for Microstrip Circuit and Material Characterization

A waveguide split-block fixture used in the characterization of thin-film superconducting planar circuitry at millimeter wavelengths is described in detail. The test fixture is realized from a pair of mode converters, which transition from rectangular-waveguide to on-chip microstrip-line signal propagation via a stepped ridge-guide impedance transformer. The observed performance of the W-band package at 4.2K has a maximum in-band transmission ripple of 2dB between 1.53 and 1.89 times the waveguide cutoff frequency. This metrology approach enables the characterization of superconducting microstrip test structures as a function temperature and frequency. The limitations of the method are discussed and representative data for superconducting Nb and NbTiN thin film microstrip resonators on single-crystal Si dielectric substrates are presented.

U-yen, Kongpop↗
NASA NTRS2017

Dynamic Control of Refractive Index During Pulsed-Laser-Deposited Waveguide Growth

Engineering the optical properties of waveguides is important for the optimization of their guided optical mode characteristics. Here, we document the dynamic control of the refractive index and composition of crystalline films, via the substrate temperature, during pulsed-laser-deposition growth of Er(1%)-doped yttrium gallium garnet on <100>-orientated single-crystal yttrium aluminium garnet. An increasing substrate temperature is observed to reduce the gallium content in the grown film, with a corresponding reduction of refractive index. We demonstrate the ability to accurately control the refractive index via this technique and use it to grow a complex multi-core crystal waveguide. Our results highlight the potential of using pulsed laser deposition to fabricate crystal films with bespoke optical properties and thus engineer passive and active waveguide devices in situ.

Temperature↗
DOE OSTI2019

AN ADVANCED ULTRASONIC WAVEGUIDE CONCEPT FOR SPATIALLY DISTRIBUTED MONITORING OF IN-CORE TEMPERATURES

Critical process temperatures in a reactor core are conventionally measured using either resistance temperature detectors or thermocouples, both of which exhibit performance degradation at the temperature ranges of advanced reactors. Ultrasonic thermometry (UT) has long been offered as an alternative, potentially robust measurement option. With emerging interest in advanced reactors and a trend toward extracting more information from the core and the connected heat transport systems, UT is again considered a potential measurement method. Conventionally, acoustic waveguides employ simple notches at a measurement point to reflect incident waves. However, this approach results in rapid attenuation of acoustic energy as the wave crosses notches, as some fraction of its energy is reflected while the rest is transmitted. This research addresses this fundamental issue. This paper reports on the development of an ultrasonic waveguide concept that exploits the constructive interference of wave dynamics. The waveguide uses acoustic filters at the measurement zones that exhibit very high transmittance or reflectance as a function of interrogation frequency. Preliminary results will be discussed.

Cetiner, Nesrin↗
DOE OSTI2023

Embedded waveguide including a substrate with a channel formed therein which includes conductive walls formed thereon and with solid via connections

Waveguides and methods for manufacturing a waveguide that include forming a first channel in a first layer of dielectric material, the first channel comprising one or more walls; forming a second channel in a second layer of dielectric material, the second channel comprising one or more walls; depositing electrically conductive material on the one or more walls of the first channel; depositing electrically conductive material on the one or more walls of the second channel; arranging the first layer adjacent to the second layer to form a stack with the first channel axially aligned with and facing the second channel; and heating the stack so that the conductive material on the one or more walls of the first channel and the conductive material on the one or more walls of the second channel connect to form the waveguide.

Krueger, Daniel Scott↗
DOE OSTI2024

Waveguide including a conductive channel embedded in a substrate and with vias connected to an antenna and a circuit component

Waveguides and methods for manufacturing a waveguide that include forming a first channel in a first layer of dielectric material, the first channel comprising one or more walls; forming a second channel in a second layer of dielectric material, the second channel comprising one or more walls; depositing electrically conductive material on the one or more walls of the first channel; depositing electrically conductive material on the one or more walls of the second channel; arranging the first layer adjacent to the second layer to form a stack with the first channel axially aligned with and facing the second channel; and heating the stack so that the conductive material on the one or more walls of the first channel and the conductive material on the one or more walls of the second channel connect to form the waveguide.

Krueger, Daniel Scott↗
NASA NTRS1995

Integrated back to back barrier-N-N(+) varactor diode tripler using a split-waveguide block

The back-to-back barrier-N-N(+) (bbBNN) varactor is a nonlinear device being developed for frequency multiplier applications above 100 GHz. Its symmetrical C-V characteristic, low series resistance, freedom from external bias and suitability to planarization make it an ideal choice for high frequency, low power, odd harmonic generation. In this paper, the performance of a 220-GHz waveguide tripler using, for the first time, a planar GaAs bbBNN device integrated on a quartz microstrip circuit is presented. A new split-waveguide block design has been employed to provide the proper embedding impedances to the device at the input and third harmonic output frequencies. A flange-to-flange tripling efficiency of 7% has been obtained at 220 GHz with an output power in excess of 700 mu W. This is believed to be the highest conversion efficiency yet reported for a tripler with an integrated device at this frequency. Theoretical calculations indicate that substantial improvement is possible with modest changes to the device and circuit parameters.

QUARTZ MICROSTRIP CIRCUITS↗
DOE OSTI2019

Structured illumination of a sub-wavelength hollow-waveguide array

A hollow-waveguide array with sub-wavelength dimensions was suggested earlier as a space-variant polarization converter. For optimum light transmission through the array, periodic structured illumination is generated by using a dielectric grating with the same period. In this paper various numerical simulations are performed. The transmission depends on numerous parameters. Particularly, it is shown how the grating can be optimized and how longitudinal and lateral displacements influence the results. For the considered configuration it is found that the transmission can be increased by factors up to 1.46 (TE) and 1.35 (TM) compared to a uniform illumination of the hollow waveguide array.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Parametric optimization of fiber to waveguide coupler using Bragg gratings

The uniform grating coupler which consists of two pairs of reflector layers in the substrate region has been proposed to couple the optical power from single mode fiber to standard 220 nm silicon-on-insulator waveguide. The efficiency of ≈ 79% in a broadband 3 dB bandwidth of ≈ 150 nm is achieved for uniform Bragg grating coupler devices. Further, by making a sequence of chirped and uniform grating, the power coupling efficiency of ≈ 98% at 1550 nm wavelength and 3 dB bandwidth of 35 nm is achieved. The importance and benefits of reflector layers along with its parametric optimization is thoroughly investigated for the calculation of optimum coupling efficiency. This research mainly focus on fiber-to-waveguide/waveguide-to-fiber coupling design. The major contribution of the research focuses on compact and efficient optical interconnection of coupler devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗