Search NASA⌕ Search

SEARCH · Search NASA

Results for “acetate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Stress-relaxation and stress-strain behavior of poly(ethylene-co-vinylacetate) at varying crosslink density

The stress-relaxation modulus of an unfilled ethylene vinyl acetate polymer at three different degrees of crosslinking was measured at 15 temperatures over a temperature span of about 160 C. At each temperature, the time response was measured for at least three decades of time. From these data it was possible to construct a master curve for each degree of crosslinking. The time-temperature shift factors, alpha(T), were found to be related to temperature by the relation log alpha(T) = -A(T - 273), where the parameter A has an average value of 0.234 for the three materials.

Fedors, R. F.↗
NASA NTRS1985

An attempt to localize and identify the gravity sensing mechanism of plants

The oxidation and transport of indole-3-acetic acid (IAA) in Zea mays is examined towards an understanding of the gravity-influenced promotion of growth in plants. An enzyme that oxidizes IAA to a nongrowth-promoting species has been partially purified, and determined to be stimulated by a lipoidal factor. Data suggest that the upward transport of IAA in the stele and outward movement from the stele into the mesophyll cortex is metabolically mediated, and possibly affected by the gravitational stimulus. It is postulated that hormone assymmetries can arise by 'potential-gating' of the transport channels between the various plant tissues.

Bandurski, R. S.↗
NASA NTRS1986

JPL encapsulation task

A detailed summary of the diverse encapsulation materials and techniques that evolved to meet the cost goals of the Flat-plate Solar Array (FSA) Project is presented. A typical solar cell now consists of low iron glass, two layers of ethylene vinyl acetate (EVA) polymers, a porous space, primers/adhesives, a back cover of Tedlar, and a gasket/seal for a volume cost of $1.30/sq ft. This compares well with the project goal of $1.40/sq ft.

Willis, P.↗
NASA NTRS1986

Chemical bonding technology

Primers employed in bonding together the various material interfaces in a photovoltaic module are being developed. The approach develops interfacial adhesion by generating actual chemical bonds between the various materials bonded together. The current status of the program is described along with the progress toward developing two general purpose primers for ethylene vinyl acetate (EVA), one for glass and metals, and another for plastic films.

Plueddemann, E.↗
NASA NTRS1986

Anticorrosion studies

The aging behavior of chemically bonded interfaces between metals and pottants, such as ethylene vinyl acetate (EVA) was studied using the Dow Corning primer systems. It was observed that the primers seem to function as anticorrosive agents on metal surfaces. It was demonstrated that EVA, and the A-11861 EVA/glass primer stops corrosion of the aluminum used on the back surfaces of crystalline silicon solar cells. However, this same treatment does not work for the aluminum on the back surfaces of amorphous silicon solar cells.

Boerio, J.↗
NASA NTRS1986

Electrochemical aging effects in photovoltaic modules

Leakage currents were experimentally measured in PV modules undergoing natural aging outdoors, and in PV modules undergoing accelerated aging in laboratory environmental chambers. The significant contributors to module leakage current were identified with a long range goal to develop techniques to reduce or stop module leakage currents. For outdoor aging in general, module leakage current is relatively insensitive to temperature fluctuations, but is very sensitive to moisture effects such as dew, precipitation, and fluctuations in relative humidity. Comparing ethylene vinyl acetate (EVA) and polyvinyl butyral (PVB), module leakage currents are much higher in PVB as compared to EVA for all environmental conditions investigated. Leakage currents proceed in series along two paths, bulk conduction followed by interfacial (surfaces) conduction.

Mon, G. R.↗
NASA NTRS1986

Leakage-current properties of encapsulants

A theoretical modeling of leakage current in ethylene vinyl acetate (EVA) and polyvinyl butyral (PVB) modules is being developed and is described. The modeling effort derives mathematical relationships for the bulk and surface conductivites of EVA and PVB, the surface conductivities of glass and polymeric films, and the EVA and PVB pottants, all as functions of environmental parameters. Results from the modeling indicate that for glass/EVA, the glass surface controls the interfacial conductivity, although EVA bulk conductivity controls total leakage current. For PVB/glass, the interface conductivity controls leakage currents for relative humidity (RH) less than 40 to 50%, but PVB bulk conductivity controls leakage current above 50% RH.

Wen, L. C.↗
NASA NTRS1986

Water permeation and electrical properties of pottants, backings, and pottant/backing composites

It is reported that the interface between plastic film back covers and ethylene vinyl acetates (EVA) or polyvinyl butyral (PVB) in photovoltaic modules can influence water permeation, and electrial properties of the composites such as leakage current and dielectric constant. The interface can either be one of two dissimilar materials in physical contact with no intermixing, or the interface can constitute a thin zone which is an interphase of the two materials having a gradient composition from one material to the other. The former condition is described as a discrete interface. A discrete interface model was developed to predict water permeation, dielectric strength, and leakage current for EVA, ethylene methyl acrylate (EMA), and PVB coupled to Tedlar and mylar films. Experimental data was compared with predicted data.

Orehotsky, J.↗
NASA NTRS1985

Closure measurements on short fatigue cracks

Single-edged notched specimens, 2.3 mm thick, of 2024-T3 aluminum were cyclicly loaded at R-ratios of 0.5, 0.0, -1.0 and -2.0. The notch roots were periodically inspected with an optical microscope to locate the initiation of very short cracks. Acetate replicas were also taken. The loads were selected to produce fatigue lives of 500,000 cycles or less. Crack opening displacements were measured at single positions across cracks as short as 0.035 mm and as long as the full thickness of the specimen. The opening load ratios for the short cracks are somewhat smaller than for long cracks at positive R-ratios, but are considerably smaller for negative R-ratios.

Lee, J. J.↗
NASA NTRS1986

Seasonal variations in the stable carbon isotopic signature of biogenic methane in a coastal sediment

Systematic seasonal variations in the stable carbon isotopic signature of methane gas occur in the anoxic sediments of Cape Lookout Bight, a lagoonal basin on North Carolina's Outer Banks. Values for the carbon isotope ratio of methane range from -57.3 per mil during summer to -68.5 per mil during winter in gas bubbles with an average methane content of 95 percent. The variations are hypothesized to result from changes in the pathways of microbial methane production and cycling of key substrates including acetate and hydrogen. The use of stable isotopic signatures to investigate the global methane cycle through mass balance calculations, involving various sediment and soil biogenic sources, appears to require seasonally averaged data from individual sites.

Martens, C. S.↗
NASA NTRS1985

Electrochemical degradation of amorphous-silicon photovoltaic modules

Techniques of module electrochemical corrosion research, developed during reliability studies of crystalline-silicon modules (C-Si), have been applied to this new investigation into amorphous-silicon (a-Si) module reliability. Amorphous-Si cells, encapsulated in the polymers polyvinyl butyral (PVB) and ethylene vinyl acetate (EVA), were exposed for more than 1200 hours in a controlled 85 C/85 percent RH environment, with a constant 500 volts applied between the cells and an aluminum frame. Plotting power output reduction versus charge transferred reveals that about 50 percent a-Si cell failures can be expected with the passage of 0.1 to 1.0 Coulomb/cm of cell-frame edge length; this threshold is somewhat less than that determined for C-Si modules.

Mon, G. R.↗
NASA NTRS1986

Possible effects of organelle charge and density on cell metabolism

A system of perception and transduction involving the gravity-induced asymmetric distribution of a plant growth hormone is studied. A theory is constructed which assumes that the perception of the gravitational stimulus involved a perturbation of the plant's bioelectric field and that the transduction of the stimulus involved voltage-gating of hormone movement from the plant's vascular tissue into the hormone responsive growing tissue. Particular attention is focused on the barriers to indole-3-acetic acid (IAA) transport from the seed to the mesocotyl cortex, the protoinhibition of IAA movement from the endosperm to the shoot, the effects of the gravitational stimulus on the movement of IAA from the kernel to the shoot, electrochemical gating as a target for the gravity stimulus, and the gravity sensing mechanism.

Bandurski, Robert S.↗
NASA NTRS1986

Role of 5-hydroxytryptamine in the regulation of brain neuropeptides in normal and diabetic rat

The effect of 5-hydroxytryptamine (5-HT) alteration on brain dopamine (DA), norepinephrine (NE), beta-endorphin (beta-E), and immunoreactive insulin was studied in Sprague-Dawley diabetic and control rats. Diabetes was induced using alloxan (45 mg/kg), 15 days prior to sacrificing. Both control and diabetic animals were treated with either p-chlorophenylalanine (PCPA, 300 mg/kg) three days prior to sacrificing or fluoxetine (10 mg/kg) twice daily for three days. PCPA treatment significantly decreased brain content of 5-HT and 5-hydroxyindolel acetic acid, while it caused significant increase and decrease in brain beta-E and insulin levels, respectively, in both normal and diabetic rat. Meanwhile, the administration of fluoxetine resulted in significant increase in brain content of 5-HT, DA, NE and insulin but significant decline of beta-E in diabetic and saline control rats. The results of this experiment indicate that 5-HT may be regulating both beta-E and insulin regardless of the availability of pancreatic insulin.

Kolta, Malak G.↗
NASA NTRS1988

Biomass-burning emissions and associated haze layers over Amazonia

The characteristics of haze layers, which were visually observed over the central Amazon Basin during many of the Amazon Boundary Layer Experiment 2A flights in July/August 1985, were investigated by remote and in situ measurements, using the broad range of instrumentation and sampling equipment on board the Electra aircraft. It was found that these layers strongly influenced the chemical and optical characteristics of the atmosphere over the eastern Amazon Basin. Relative to the regional background, the concentrations of CO, CO2, O3, and NO were significantly elevated in the plumes and haze layers, with the NO/CO ratio in fresh plumes much higher than in the aged haze layers. The haze aerosol was composed predominantly of organic material, NH4, K(+), NO3(-), SO4(2-), and organic anions (formate, acetate, and oxalate).

Andreae, M. O.↗
NASA NTRS1988

Seasonal variations of D/H and C-13/C-12 ratios of microbial methane in surface sediments

Appreciable seasonal and spatial variation has been found in the delta D and delta C-13 of gas-phase microbial CH4 produced in the marine sediments of Cape Lookout Bight (CLB), North Carolina. The observations provide indirect evidence that the CLB CH4 delta variation reflects variation in the relative contributions of the main CH4 precursors, acetate and CO2/H2. The delta D-CH4 and delta C-13-CH4 are inversely correlated, indicating that microbial consumption is not responsible for the delta variation. While CLB is not strictly representative of wetlands in general, some of the key microbial processes and environmental characteristics that appear largely responsible for the observed CLB CH4 delta variation are probably similar in typical temperate and high-latitude wetlands.

Burke, Roger A., Jr.↗
NASA NTRS1988

Closure measurements of naturally initiating small cracks

The initiation and growth of cracks in smooth 2024-T3 aluminum specimens have been investigated using acetate replicas. Crack opening displacements were measured as a function of load at several positions along the crack as it grew across the thickness of the specimen and became a through-the-thickness crack of a few millimeters in length. Tests run for R-ratios of 0.5, 0.0 and -1.0 showed that closure loads were well predicted by Newman's (1984) model. It is noted that small cracks grow slightly faster than would be predicted by long-crack data, and it is suggested that effects other than plasticity-induced closure must be taken into account.

Sharpe, W. N., Jr.↗
NASA NTRS1989

Glass Coats For Hot Isostatic Pressing

Surface voids sealed from pressurizing gas. Coating technique enables healing of surface defects by hot isostatic pressing (HIP). Internal pores readily closed by HIP, but surface voids like cracks and pores in contact with pressurizing gas not healed. Applied to casting or weldment as thick slurry of two glass powders: one melts at temperature slightly lower than used for HIP, and another melts at higher temperature. For example, powder is glass of 75 percent SiO2 and 25 percent Na2O, while other powder SiO2. Liquid component of slurry fugitive organic binder; for example, mixture of cellulose acetate and acetone. Easy to apply, separates voids from surrounding gas, would not react with metal part under treatment, and easy to remove after pressing.

Ecer, Gunes M.↗
NASA NTRS1988

Primary sedimentary structures and the internal architecture of a Martian sand body in search of evidence for sand transport and deposition

Lunar experiences show that unmanned sample return missions, despite limitations on sample size, can produce invaluable data to infer crustal processes, regolith processes, regolith-atmosphere/ionosphere interaction processes, etc. Drill cores provide a record of regolith evolution as well as a more complete sample of the regolith than small scoops and/or rakes. It is proposed that: (1) a hole be drilled in a sand body to obtain continuous oriented cores; a depth of about 10 m would be compatible with what we know of bed form hierarchy of terrestrial stream deposits; (2) two trenches, at right angles to each other and close to the drill-hole, be dug and the walls scraped lightly such that primary/internal sedimentary structures of the sand body become visible; (3) the walls of the trenches be made gravitationally stable by impregnation techniques; (4) acetate or other peels of a strip on each wall be taken; and (5) appropriately scaled photographs of the walls be taken at different sun-angles to ensure maximum ease of interpretation of sedimentary structures; and, to correlate these structural features with those in the core at different depth levels of the core.

Basu, Abhijit↗