Search NASA⌕ Search

SEARCH · Search NASA

Results for “actinide materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Effect and measurement of residual water in CaCl 2 intended for use as electrolyte in molten salt electrochemical processing

We report CaCl 2 has applications for electrochemical processing of nuclear materials. Thermal dehydration leads to formation of oxide ions, which are shown to react and cause precipitation of dissolved CeCl 3 that was selected as a surrogate for actinide chlorides. Thus, measurement of residual water in CaCl 2 is an essential capability. Thermogravimetric analysis (TGA) was shown to underestimate starting water concentration. Subsequent analysis of solid samples via acid–base titration and cyclic voltammetry (CV) of the molten salt yielded consistent values within 5% for residual water. Hydroxides were shown to be unstable, thus oxygen is retained as oxide ions. Thus, total water in a sample of CaCl 2 can be quantified by combining TGA with with either CV of molten salt or titration of salt samples. The importance of quantifying residual water in the salt was demonstrated by showing that cerium chloride (surrogate for actinide chlorides) will react with oxide ions in CaCl 2 to form insoluble oxides and oxychlorides.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Isolation of a californium(II) crown–ether complex

The actinides, from californium to nobelium (Z = 98–102), are known to have an accessible +2 oxidation state. Understanding the origin of this chemical behaviour requires characterizing Cf II materials, but investigations are hampered by the fact that they have remained dificult to isolate. This partly arises from the intrinsic challenges of manipulating this unstable element, as well as a lack of suitable reductants that do not reduce Cf III to Cf°. Here we show that a Cf II crown–ether complex, Cf(18-crown-6)I 2 , can be prepared using an Al/Hg amalgam as a reductant. Spectroscopic evidence shows that Cf III can be quantitatively reduced to Cf II , and rapid radiolytic re-oxidation in solution yields co-crystallized mixtures of Cf II and Cf III complexes without the Al/Hg amalgam. Furthermore, quantum-chemical calculations show that the Cf– ligand interactions are highly ionic and that 5f/6d mixing is absent, resulting in weak 5f→5f transitions and an absorption spectrum dominated by 5f→6d transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Verification Testing of OLI Systems Mixed Solvent Electrolyte Model for the Na-K-Mg-Ca-H-Cl-SO 4 -OH-HCO 3 -CO 3 -CO 2 -H 2 ) System to High Ionic Strength at 25°C

This technical report summarizes model verification results and summary statistics for 41 evaporite mineral solubility cases evaluated by Savannah River National Laboratory using OLI Systems’ aqueous electrolyte thermodynamic modeling software. The 41 verification cases containing a total of 60 solubility curves comprise mineral solubility data from low to high ionic strength at 25°C for the eight-component system Na-K-Mg-Ca-H-Cl-SO 4 -OH-HCO 3 -CO 3 -CO 2 -H 2 O as reported by Harvie et al. (1984). Thermodynamic calculations were executed using OLI Systems’ Stream Analyzer computation module within the OLI Studio software platform (Ver. 11.0, Rev. 11.0.1.9). The Mixed Solvent Electrolyte (MSE) thermodynamic framework was chosen for this investigation because of its superiority in modeling high ionic-strength inorganic salt solutions and actinide redox chemistry and solubility, both of which are relevant to the geological repository conditions at the Waste Isolation Pilot Plant in Carlsbad, New Mexico. Mineral solubility data in various inorganic salt solutions were digitized and extracted from figures generated by Harvie et al. (1984). For each of the 60 solubility curves, a case-specific chemistry model and input file were generated in OLI Studio using OLI Stream Analyzer and the MSE (H 3 O + ion) public databank provided by OLI Systems. Model simulation results were exported to Microsoft Excel to calculate summary statistics and to generate graphs comparing the OLI model predictions to the solubility data. Summary statistics include residuals (model – data) and concordance (accuracy × precision, where precision is indicated by the Pearson correlation coefficient and accuracy accounts for bias and scale differential). Private databanks were not developed, and activity coefficient model regressions were not performed to improve OLI model fits to the data. Of the 41 model verification plots, 83% have a mean of the percent residuals less than or equal to 25%. Similarly, 75% display a concordance greater than or equal to 0.75. Only seven of the 41 verification plots fail to show good agreement between the model and data. Of these seven, three are relevant to the WIPP repository because they involve the Mg-OH-Cl-SO 4 -CO 3 aqueous system. The remaining four address salt solubilities at the pH extremes (strong acid and strong base). It should be noted that in two of the three Mg-OH-Cl-SO 4 -CO 3 system cases, the regressed Harvie et al. (1984) solubility curve also deviated from the data. Lack of agreement between the OLI model-predicted solubility curves and the data is attributable to one or more of the following: specific solid species are not included in the OLI MSE databank; there is significant variation among the different solubility datasets chosen by Harvie et al. (1984); the OLI MSE model’s thermodynamic parameters were determined using different solubility datasets; and the activity coefficient parameters for certain relevant ion-ion and ion-molecule pairs have not been optimized via data regression. Two recommendations for future work are to (1) evaluate solubility data for the Mg-OH-Cl-SO 4 -CO 3 system at high ionic strength and, if necessary, develop a private OLI MSE database that includes missing species and, where necessary, regressed standard state properties and interaction parameters; (2) perform similar verification testing of the OLI model for actinide solubility data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Re-evaluating the Thermal-Spectrum Molten-Salt Breeder Reactor Fuel Cycle in a Modern Context

The current need to rapidly and substantially expand clean power production combined with limited capability for domestic uranium enrichment results in a U.S. nuclear power production planning environment similar to that of the first nuclear era. The U.S. thermal-spectrum molten-salt breeder reactor (TS-MSBR) program emerged during the first nuclear era as means to support rapid nuclear power expansion while minimizing demand on fissile resources. The primary reasons that the TS-MSBR program was discontinued in the 1970s were the comparatively large amount of required effort to mature its technology sufficiently for commercial deployment and the access to separated fissile material provided by the design of its integrated fuel cycle. The slowdown in U.S. electrical load growth after 1980 and the abundance of inexpensive fossil fuels inhibited reconsideration of TS-MSBR development for decades. The purpose of this discussion is to re-examine the value and technical challenges of TS-MSBRs with integrated fuel salt chemical processing considering the renewed need for rapid expansion of clean energy production worldwide, the current state of technology, the challenge of actinide wastes, and the continuing need to maintain a high degree of proliferation resistance and to integrate safeguards into the design.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Metal complexes and methods of making the same

Disclosed herein are embodiments of metal complexes and methods of making the same. The disclosed method embodiments provide a one-step approach to making metal complexes, such as complexes comprising lanthanide metals, rare earth metals, transition metals, main group metals, and/or actinide metals that can be used various applications, such as in separations technology, catalysis (e.g., catalysts for pharmaceutical synthesis and/or catalysts for biomass conversion), nuclear chemistry, LED phosphors, scintillator materials, magnetic materials, and nuclear fuels.

Kiplinger, Jaqueline↗
DOE OSTI2021

Photodissociation and Infrared Spectroscopy of Uranium–Nitrogen Cation Complexes

Laser vaporization of uranium in a pulsed supersonic expansion of nitrogen is used to produce complexes of the form U + (N 2 ) n (n = 1–8). These ions are mass selected in a reflectron time-of-flight spectrometer and studied with visible and UV laser fixed-frequency photodissociation and with tunable infrared laser photodissociation spectroscopy. The dissociation patterns and spectroscopy of U + (N 2 ) n indicate that N 2 ligands are intact molecules and that there is no insertion chemistry resulting in UN + or NUN + . Fixed frequency photodissociation at 532 and 355 nm indicate that the U + –N 2 bond dissociation energy varies little with changing coordination. The photon energy and the number of ligands eliminated allow an estimate of the average U + –N 2 dissociation energy of 12 kcal/mol. Infrared bands are observed for these complexes near the N–N stretch vibration via elimination of N 2 molecules. These resonances are observed to be shifted about 130 cm–1 to the red from the free-N 2 frequency for complexes with n = 3–8. Density functional theory indicates that U + is most stable in the sextet state in these complexes and that N 2 molecules bind in end-on configurations. Furthermore, the fully coordinated complex is predicted to be U + (N 2 ) 8 , which has a cubic structure. The vibrational frequencies predicted by theory are consistently lower than those in the experiment, independent of the isomeric structure or spin state of the complexes. Despite its failure to reproduce the infrared spectra, theory provides an average U + –N 2 dissociation energy of 11.8 ± 0.5 kcal/mol, in good agreement with the value from the experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Flowsheet Evaluation of Dissolving Used Nuclear Fuel in PUREX Solvent

This study explores the potential benefit to the used nuclear fuel actinide recovery flowsheet of a process simplification and establish the experimental work needed to develop the simplified flowsheet. The simplification is based on replacing acid dissolution of used nuclear fuel with dissolution in the tri-butyl phosphate solvent used in the industrially mature Plutonium Uranium Reduction Extraction flowsheet. Though characterized by considerable uncertainty, simplified flowsheets appear feasible and potentially offer significant reductions in process complexity, nitrate inventory, secondary liquid effluent generation and plant footprint. Initial development of the technology should focus on key fission product and actinide dissolution as a function of process conditions and understanding the fundamental chemistry of tri-butyl phosphate solvent chemistry. Development of ancillary technologies for minor actinide separations and fuel pretreatment for tritium management is also recommended.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

A Review of Advanced Test Reactor Fuel and Assessment of Its Compatibility with the ZIRCEX Chlorination Process

Advanced Test Reactor (ATR) fuel has been identified as a resource for high-assay low-enriched uranium (HALEU) production. A survey was performed on the published literature describing ATR fuel. The geometry of the fuel is complex; different parts of the fuel compact experience differing neutron flux and burnup. The literature is sparse, and access is controlled. Therefore, fundamental studies of fuel reprocessing must use a model fuel that represents the main chemical and structural features. Advanced chlorination, or chlorination with sulfur-chlorine bearing reagents is being investigated as way to separate the fuel from metal matrix alloys. A UAl x alloy will be fabricated with x = 3, 4, and 5. The potential chlorination of individual UAl x intermetallics will be assessed in the advanced chlorination process of Al-8001 and Al-6061 as well as a representative mixture. Initial studies will track the alloying elements of the Al, which are Si, Fe, Cu, Mn, Mg, Cr, Zn, and Ti, in addition to the U itself. Further studies will include fission product simulants. Because advanced chlorination solvents include sulfur, the chemistry of sulfur with major and minor constituents will also be investigated. The experimental work accompanied by neutronic calculations will allow the assessment of the feasibility of advanced chlorination to separate aluminum from uranium. If bench-scale testing appears promising, then small-scale tests in shielded facilities with irradiated cladding, lightly irradiated fuel, and spent nuclear fuel are recommended to track the complete inventory of fissile actinides, fission product impurities, and reagent solids and liquids.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Cerium oxide impact on fresh and hardened properties of cementitious materials

Cements used in global nuclear waste treatment, storage, and disposal require thorough testing of fresh and cured properties to demonstrate regulatory compliance. Using actual radioactive wastes is often cost-prohibitive during early scoping tests necessitating the use of non-radiological surrogates. Cerium (Ce) is often used as a surrogate for actinides uranium (U) and plutonium (Pu) in spent nuclear fuel, yet few studies have explored how Ce impacts the properties used to qualify a cement for use. Here, this work compares the fresh and cured properties of three classes of cements – ordinary portland cements, ultra-high performance cement composites, and magnesium phosphate cements – each with and without ceria (CeO 2 ). Due to CeO 2 sorption of water (54 vol%) that effectively decreases the water available to hydrate and form binding cement phases, variations in key cement properties were detected that suggest surrogate CeO 2 –cementitious matrices may not be representative of matrix behaviors when using U and Pu sources.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Plutonium and Cerium Perrhenate/Pertechnetate Coordination Polymers and Frameworks

Spent nuclear fuel (SNF) contains transuranic and lanthanide species, which are sometimes recovered and repurposed. One particularly problematic fission product, 99 TcO 4 – , hampers this recovery via coextraction with high valence metals, perhaps by complexation during aqueous reprocessing of SNF. There is limited molecular-level knowledge concerning the coordination chemistry between TcO 4 – or its well-known surrogate ReO 4 – and transuranic/lanthanide species. In the current study, we investigated the coordination of ReO 4 – /TcO 4 – with plutonium and cerium cations by structural and chemical characterization of a series of isolated extended solids. In this study, Ce represents both trivalent lanthanides and is considered a surrogate for Pu, respectively, in its common trivalent and tetravalent oxidation states. The structural elucidation of the seven isolated crystalline solids revealed that ReO 4 – /TcO 4 – directly connects to Pu IV , Pu VI O 2 2 + , Ce III , and Ce IV in the terminal and bridging coordination modes, leading to 1-, 2-, and 3-dimensional frameworks. For example, ReO 4 – coordination to Pu(IV) formed a 1D chain or 2D framework, isostructural with previously isolated Th(IV) compounds. However, Pu VI O 2 2 + alternating with ReO 4 – led to a unique 1D chain, different from the prior-reported U(VI)/Np(VI)-ReO 4 – /TcO 4 – structures. Coordination of ReO 4 – /TcO 4 – with Ce(III) promotes the assembly of 3D frameworks. Finally, attempted synthesis of a Ce(IV)-ReO 4 – compound resulted in a 2D framework with a mixed-valence Ce III/IV . The highly acidic reaction conditions supported the reduction of both Ce IV and Tc VII , challenging isolation of compounds featuring these species. Only one TcO 4 -containing structure was obtained in this study (Ce III –TcO 4 3D framework), vs the six total Ce/Pu-ReO 4 compounds. Furthermore, our three Pu-ReO 4 crystal structures are the first reported and translated to atomic-level information about Pu-TcO 4 coordination in nuclear fuel reprocessing scenarios, in addition to broadening our knowledge of bonding trends in the early, high-valence actinides.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Molten Flux Synthesis of Plutonium (IV) Silicates K 2 PuSi 2 O 7 and Rb 2 PuSi 6 O 15

Few plutonium containing silicates have been reported in the literature and only one other tetravalent plutonium silicate structure has been reported using the flux growth method. With the goal of understanding actinide incorporation into silicates, we describe herein two new plutonium (IV) silicates, Rb 2 PuSi 6 O 15 and K 2 PuSi 2 O 7 , synthesized using a mixed alkali chloride/alkali fluoride flux growth. Both structures crystallize in the C2/c space group with lattice parameters a=24.2980(10) Å, b=7.1466(3) Å, c=17.2025(8) Å and $\blacksquare$96.6560(10)° for Rb 2 PuSi 6 O 15 , and a=9.9478(2) Å, b=5.59820 (10) Å, c=13.1848(2) Å, and $\blacksquare$105.7400(10)° for K 2 PuSi 2 O 7 . Comparisons to the synthesis of other reported alkali actinide silicates (Ce, U, and Th) are made. Raman spectra and DFT calculations of formation enthalpies and vibrational modes provide confirmation of structure refinements and enhanced product characterization for comparison with other materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Defect-induced phonon-resonant scattering and its influence on thermal transport of irradiated thorium-dioxide

Thermal transport in proton irradiated thorium-dioxide (ThO 2 ) is investigated. Using a combination of experiments and first-principles computational framework, the role of lattice defects on thermal conductivity is analyzed. A resonant-phonon scattering mechanism beyond the traditionally considered Rayleigh scattering is found to significantly influence low-temperature thermal transport in the presence of irradiation-induced point defects. The existence of localized phonon modes associated with irradiation-induced defects is suggested by the inability of the first-principles based thermal conductivity model—which considers only three-phonon interactions and phonon-defects scattering using the Tamura formalism—to predict the experimental results, unless a resonant scattering mechanism is included. The emergence of additional peaks in the Raman spectra in the proximity of phonon-resonant frequency provides further evidence for the existence of localized modes. Coupled with a microstructure evolution model, this analysis enables more accurate analysis for contrasting the contributions of different phonon scattering mechanisms across all irradiation doses and temperatures.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Analysis of a Bulk 237 Np Oxide Sample for Trace Actinides

A neptunium oxide sample was dissolved and trace actinide constituents were measured by isotope dilution ICP-MS (for 239–244 Pu, 233–238 U, 237 Np, 241–243 Am) and alpha spectrometry ( 238 Pu, 242 Cm, 244 Cm). This material contained significant quantities of transuranic elements, notably americium and curium. The isotopic composition of the material will continue to evolve over time due to radioactive decay; the measurements reported here include all isotopes decay corrected to a reference date of 1/1/2022. These factors may be considerations in criticality studies of the related 237 Np sphere.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Development of an MC&A toolbox for liquid-fueled molten salt reactors with online reprocessing (Final Report)

A critical barrier to the deployment of MSRs is the absence of a well-defined nuclear material control and accounting (MC&A) approach, a vital prerequisite to meet NRC licensing requirements as well as facilitating future international exports. Liquid-fueled MSR variants (especially those incorporating online refueling or reprocessing) present a unique set of challenges to traditional nuclear material control and accountancy. Unlike solid-fueled light-water reactors, traditional item-counting methods cannot be applied as an accountancy strategy. Rather, MC&A approaches to MSR variants (including both uranium and thorium fueled designs) are more analogous to bulk material handling facilities (e.g., enrichment and reprocessing); yet further complicating matters is the fact that fuel medium is also highly radioactive. Meanwhile, the space of MSRs covers a broad range of design parameters, including thermal and fast spectra designs; operation in actinide breeder or burner modes, choice of actinide fuel used (e.g., 235 U, 232 Th / 233 U, denatured 233 U, etc.), pool or loop-type configuration, and even different salt chemistry. Each of these design choices introduce significant challenges to MC&A approaches within MSR facilities. We propose to bridge this gap for liquid-fueled MSRs by developing a modular, component-based test framework for evaluating viable process monitoring and MC&A techniques specifically suited to liquid-fueled MSR system variants employing online refueling or reprocessing. This test platform will consist of a toolbox of independent process modules representing discrete physical units (such as the reactor core, off-gas processing, decay tanks, and actinide separation units), each with its own self-contained physics responsive to the input mass flow, along with appropriate measurement models that can be coupled to key flow points. These dynamic physical signatures thus afford the ability to test the viability and efficacy of potential accountancy techniques under the full range of reactor operating conditions. As process modules are connected via mass flows, the result is a reconfigurable, generic MSR mass flow model capable of serving as an MC&A test platform for a broad spectrum of possible MSR configurations. The resulting MSR MC&A toolbox will enable robust assessment of accountancy strategies for this unique facility type, including analysis of physical feedbacks arising both from depletion of the fuel over time as well as from potential off-normal events, including those introduced by equipment failures (e.g., a pump failure) as well as by malicious action (i.e., attempts to divert material). The proposed toolbox both addresses a critical needs area for the MPACT analysis toolkit while leveraging existing MPACT-sponsored tools, especially with respect to simulation of measurement and accountancy techniques for advanced fuel cycle facilities. Beyond enabling new analysis capabilities for MSR systems, the design of this toolbox will be to such to maximize compatibility with existing MPACT tools, such to enhance existing facility MC&A analysis capabilities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗