Search NASA⌕ Search

SEARCH · Search NASA

Results for “aircraft testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Data acquisition system for NASA LaRC impact dynamics research facility

A data system is designed to permit the simultaneous recording of 90 data channels on one 28 track magnetic tape recorder using a constant bandwidth FM multiplexing technique. Dynamic signals from transducers located in the test aircraft are amplified and fed to voltage controlled oscillators where they are converted to discrete FM signals. The signals from each group of five VCO's are fed to a mixer/distribution amplifier where they are combined into one composite signal and recorded, using direct recording techniques, on one magnetic tape recorder track. Millivolt signals from the recorders reproduce heads are amplified to one volt and then electronically switched to an FM demultiplexing system where appropriate frequency discrimination and signal filtering recover the original analog information.

Mccormick, R. F.↗

Investigation of installation effects of single-engine convergent-divergent nozzles

An investigation was conducted in the Langley 16-Foot Transonic Tunnel to determine installation effects on single-engine convergent-divergent nozzles applicable to reduced-power supersonic cruise aircraft. Tests were conducted at Mach numbers from 0.50 to 1.20, at angles of attack from -3 degrees to 9 degrees, and at nozzle pressure ratios from 1.0 (jet off) to 8.0. The effects of empennage arrangement, nozzle length, a cusp fairing, and afterbody closure on total aft-end drag coefficient and component drag coefficients were investigated. Basic lift- and drag-coefficient data and external static-pressure distributions on the nozzle and afterbody are presented and discussed.

Burley, J. R., II↗

Investigation of installation effects on twin-engine convergent-divergent nozzles

An investigation was conducted in the Langley 16-Foot Transonic Tunnel to determine installation effects on convergent-divergent nozzles applicable to twin-engine reduced-power supersonic cruise aircraft. Tests were conducted at Mach numbers from 0.50 to 1.20, angles of attack from -5 deg to 9 deg, and at nozzle pressure ratios from jet off (1.0) to 8.0. The effects of empennage arrangement, nozzle length, and afterbody closure on total and component drag coefficients were investigated.

Bare, E. A.↗

Real-time pilot guidance system for improved flight test maneuvers

The Dryden Flight Research Facility of the NASA Ames Research Center has developed a pilot trajectory guidance system that increases the accuracy of flight-test data and decreases the time required to achieve and maintain desired test conditions. The system usually presented to the pilot computed differences between reference or desired and actual flight state conditions. The pilot then used a cockpit display as an aid to acquire and hold desired test conditions. This paper discusses various flight-test maneuvers and the quality of data obtained using the guidance system. Some comparisons are made between the quality of maneuvers obtained with and without the system. Limited details of the guidance system and algorithms used are included. In general, the guidance system improved the quality of the maneuvers and trajectories flown, as well as allowing trajectories to be flown that would not have been possible without the system. This system has moved from the developmental stage to full operational use in various Dryden research and test aircraft.

Meyer, R. R., Jr.↗

Low-speed wind-tunnel study of the high-angle-of-attack stability and control characteristics of a cranked-arrow-wing fighter configuration

The low-speed, high-angle-of-attack stability and control characteristics of a fighter configuration incorporating a cranked arrow wing were investigated in the Langley 30- by 60-foot tunnel as part of a NASA/General Dynamics cooperative research program to investigate the application of advanced wing designs to combat aircraft. Tests were conducted on a baseline configuration and on several modified configurations. The results show that the baseline configuration exhibited a high level of maximum lift but displayed undesirable longitudinal and lateral-directional stability characteristics at high angles of attack. Various wing modifications were made which improved the longitudinal and lateral-directional stability characteristics of the configuration at high angles of attack. However, most of the modifications were detrimental to maximum lift.

Grafton, S. B.↗

Real-time pilot guidance system for improved flight-test maneuvers

The Dryden Flight Research Facility has developed a pilot trajectory guidance system that is intended to increase the accuracy of flight-test data and decrease the time required to achieve and maintain desired test conditions, or both. The system usually presented to the pilot computed differences between reference or desired and actual flight state conditions. The pilot then used a cockpit display as an aid to acquire and hold desired test conditions. This paper discusses various flight-test maneuvers and the quality of data obtained using the guidance system. Some comparisons are made between the quality of maneuvers obtained with and without the system. Limited details of the guidance system and algorithms used are included. In general, the guidance system improved the quality of the maneuvers and trajectories flown, as well as allowing trajectories to be flown that would not have been possible without the system. This system has moved from the developmental stage to full operational use in various Dryden research and test aircraft.

Meyer, R. R., Jr.↗

Extinction of in-flight engine fuel-leak fires with dry chemicals

The dry chemicals discussed here are seen as having a greater weight effectiveness than the halons in current use for controlling fuel-leak fires, especially in the presence of high airflow rates. The commercial dry chemicals K2CO3, KHCO3, and KC2N2H3O3 are found to be more effective than CF2ClBr and CF3Br in delaying the hot-surface reignition of fuel-leak fires after initial extinguishment. Experimental dry chemical formulations of potassium dawsonite, KAl(OH)2CO3, and of KCl and KI are seen as being even more weight effective than the above-mentioned commercial dry chemicals. It is noted, however, that the suitability and effectiveness of dry chemicals in controlling engine nacele fires has not yet been demonstrated in test aircraft.

Altman, R. L.↗

Direct Observation of Critical Point Wetting in Microgravity

The objective of this program is to observe the interface shape in single and multicomponent systems at the onset of critical wetting in microgravity using the MSFC drop tower and KC-135 aircraft. Test cells for the drop facility were built and tested up to critical point of CCl. Low temperature drops were conducted for two-component systems near the critical consolute point. Contact angle seems to approach 90 deg near the critical consolute temperature contrary to expectations. It is suspected that since the interfacial energy becomes vanishingly small at the critical consolute temperature, the interface shape has not reached equilibrium in the available low-gravity time.

Kaukler, W. F.↗

Effects of inlet distortion on a static pressure probe mounted on the engine hub in an F-15 airplane

Problems encountered in obtaining good engine face pressure data were studied. A single static measurement located upstream of the engine hub in the stream flow was found to provide a pressure signal suitable for engine control. Two identical probes for measuring fan inlet static (PS2) pressure were designed and mounted on the hub of the left F100-PW-100 turbofan engine installed in the F-15 test aircraft for flight evaluation. The probe is used as a static pressure sensor for a digital engine control system.

Hughes, D. L.↗

Real-time open-loop frequency response analysis of flight test data

A technique has been developed to compare the open-loop frequency response of a flight test aircraft real time with linear analysis predictions. The result is direct feedback to the flight control systems engineer on the validity of predictions and adds confidence for proceeding with envelope expansion. Further, gain and phase margins can be tracked for trends in a manner similar to the techniques used by structural dynamics engineers in tracking structural modal damping.

Bosworth, J. T.↗

Development of HIDEC adaptive engine control systems

The purpose of NASA's Highly Integrated Digital Electronic Control (HIDEC) flight research program is the development of integrated flight propulsion control modes, and the evaluation of their benefits aboard an F-15 test aircraft. HIDEC program phases are discussed, with attention to the Adaptive Engine Control System (ADECS I); this involves the upgrading of PW1128 engines for operation at higher engine pressure ratios and the production of greater thrust. ADECS II will involve the development of a constant thrust mode which will significantly reduce turbine operating temperatures.

Landy, R. J.↗

Digital program for calculating static pressure position error

A computer program written to calculate the static pressure position error of airspeed systems contains five separate methods for determining position error, of which the user may select from one to five at a time. The program uses data from both the test aircraft and the ground-based radar to calculate the error. In addition, some of the methods require rawinsonde data or an atmospheric analysis, or both. The program output lists the corrections to Mach number, altitude, and static pressure that are due to position error. Reference values such as angle of attack, angle of sideslip, indicated Mach number, indicated pressure altitude, stagnation pressure, and total temperature are also listed.

Johnson, J. Blair↗

Three-dimensional analysis of potential vorticity associated with tropopause folds and observed variations of ozone and carbon monoxide

The usability and reliability of potential vorticity as a meteorological stratospheric tracer are evaluated. The concept of potential vorticity conservation during transport in which stratospheric and tropospheric air are mixing is tested. Aircraft data collected on April 20, 1984 in the western and southwestern U.S. are analyzed in order to derive potential vorticity data; vertical cross sections of constant-pressure data and temperature and wind speed gradients are examined. The tropopause fold observed during the April 20, 1984 aircraft flights is described. The potential vorticity, ozone mixing ratio, and carbon monoxide mixing ratio are compared; a positive correlation between potential vorticity and the ozone mixing ratio and a negative correlation between the potential vorticity and the carbon monoxide mixing ratio are detected. The data support the concepts of the conservation of potential vorticity, the entrainment and mixing of tropospheric air across the boundaries of the fold, and the applicability of potential vorticity as a stratospheric tracer.

Danielsen, Edwin F.↗

Smart command recognizer (SCR) - For development, test, and implementation of speech commands

The SCR, a rapid prototyping system for the development, testing, and implementation of speech commands in a flight simulator or test aircraft, is described. A single unit performs all functions needed during these three phases of system development, while the use of common software and speech command data structure files greatly reduces the preparation time for successive development phases. As a smart peripheral to a simulation or flight host computer, the SCR interprets the pilot's spoken input and passes command codes to the simulation or flight computer.

Simpson, Carol A.↗

Laser Velocimeter For Outdoor Or Wind-Tunnel Measurements

Laser velocimeter developed for remotely controlled operation in large wind tunnel or at outdoor aircraft-testing site. Long-range laser velocimeter has expanded focal range and ability to measure two perpendicular components of velocity simultaneously. Includes electronic subsystems for control and acquisition of data.

Reinath, Michael S.↗

Pressure visualization (PreViz) package version 1.0 user's guide

The Pressure Visualization (PreViz) package is a software tool which merges a wireframe model of the test aircraft with pressure data represented as a series of displacement vectors normal to the aircraft's skin. The PreViz package automates much of the researcher's data reduction effort, reduces the time required to review large amounts of pressure data, presents the data more clearly than tabular listings, and provides a wireframe description for a black and white graphic suitable for a technical publication (the actual graphic images must be created by a local package since PreViz has no graphics capability). Although designed for pressure data, the PreViz package works equally well for any surface property (such as structural loading or skin temperature). Written in ANSI-standard FORTRAN 77 and self-contained, PreViz executes in UNIX, VAX/VMS, and CDC/NOS host environments.

Bingel, Bradford D.↗

Charge control experiments on a CH-53E helicopter in a dusty environment

Charge control tests were carried out on a ground based, Marine Corps helicopter to determine if control of the electric fields acting on the engine exhaust gases could be used to reduce the electrification of the helicopter when it operated in a dusty atmosphere. The test aircraft was flown to a dusty, unpaved area and was then isolated electrically from the earth. When the helicopter engines were operated at ground idle with the rotor locked, the isolated aircraft charged positively, as had been observed previously. However, when the rotor brake was released and the turning rotor created a downdraft that raised dust clouds, the aircraft always became charged more positively, to potentials ranging form +30 to +45 kV. The dust clouds raised by the rotor downwash invariably carried negative space charges with concentrations of up to -100 nC/cu m and caused surface electric fields with strengths of up to 10 kV/m immediately down wind of the aircraft. The natural charging of the helicopter operating in these dust clouds was successfully opposed by control of the electric fields acting on the hot, electrically conductive exhaust gases. The control was achieved by placing electrostatic shield around the exhausts.

Moore, C. B.↗

Validation of the dynamic response of a blade-element UH-60 simulation model in hovering flight

The dynamic fidelity of an operational blade-element simulation model of the UH-60 helicopter is assessed for the hovering and low-speed flight regimes. Nonparametric frequency-domain identification techniques and time-history comparisons are used to determine the validity of total-vehicle on-axis and coupled responses. A dedicated flight-test program was conducted to provide data used in the analysis. The flight-test techniques and data verification methods employed are briefly described. Frequency-domain methods are applied to the model and to several model components in order to isolate deficiencies and verify refinements and corrections. Model deficiencies are also identified by using side-by-side pilot assessments of a motion-base simulation and of a test aircraft. Model updates are found to significantly improve fidelity in the frequency range that is of interest to handling-qualities research. The applicability of the model to high-bandwidth flight-control research is also discussed.

Dalang-Secretan, Marie-Alix↗