Search NASA⌕ Search

SEARCH · Search NASA

Results for “analyzable function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

A Priori Analysis of Flamelet-Based Modeling for a Dual-Mode Scramjet Combustor

An a priori investigation of the applicability of flamelet-based combustion models to dual-mode scramjet combustion was performed utilizing Reynolds-averaged simulations (RAS). For this purpose, the HIFiRE Direct Connect Rig (HDCR) flowpath, fueled with a JP-7 fuel surrogate and operating in dual- and scram-mode was considered. The chemistry of the JP-7 fuel surrogate was modeled using a 22 species, 18-step chemical reaction mechanism. Simulation results were compared to experimentally-obtained, time-averaged, wall pressure measurements to validate the RAS solutions. The analysis of the dual-mode operation of this flowpath showed regions of predominately non-premixed, high-Damkohler number, combustion. Regions of premixed combustion were also present but associated with only a small fraction of the total heat-release in the flow. This is in contrast to the scram-mode operation, where a comparable amount of heat is released from non-premixed and premixed combustion modes. Representative flamelet boundary conditions were estimated by analyzing probability density functions for temperature and pressure for pure fuel and oxidizer conditions. The results of the present study reveal the potential for a flamelet model to accurately model the combustion processes in the HDCR and likely other high-speed flowpaths of engineering interest.

Quinlan, Jesse R.↗
NASA NTRS2015

Evidence for the Sequestration of Hydrogen-Bearing Volatiles Towards the Moons Southern Pole-Facing Slopes

The Lunar Exploration Neutron Detector (LEND) onboard the Lunar Reconnaissance Orbiter (LRO) detects a widespread suppression of the epithermal neutron leakage flux that is coincident with the pole-facing slopes (PFS) of the Moon's southern hemisphere. Suppression of the epithermal neutron flux is consistent with an interpretation of enhanced concentrations of hydrogen-bearing volatiles within the upper meter of the regolith. Localized flux suppression in PFS suggests that the reduced solar irradiation and lowered temperature on PFS constrains volatility to a greater extent than in surrounding regions. Epithermal neutron flux mapped with LEND's Collimated Sensor for Epithermal Neutrons (CSETN) was analyzed as a function of slope geomorphology derived from the Lunar Orbiting Laser Altimeter (LOLA) and the results compared to co-registered maps of diurnally averaged temperature from the Diviner Lunar Radiometer Experiment and an averaged illumination map derived from LOLA. The suppression in the average south polar epithermal neutron flux on equator-facing slopes (EFS) and PFS (85-90 deg S) is 3.3 +/- 0.04% and 4.3 +/- 0.05% respectively (one-sigma-uncertainties), relative to the average count-rate in the latitude band 45-90 deg S. The discrepancy of 1.0 +/- 0.06% between EFS and PFS neutron flux corresponds to an average of approximately 23 parts-per-million-by-weight (ppmw) more hydrogen on PFS than on EFS. Results show that the detection of hydrogen concentrations on PFS is dependent on their spatial scale. Epithermal flux suppression on large scale PFS was found to be enhanced to 5.2 +/- 0.13%, a discrepancy of approximately 45 ppmw hydrogen relative to equivalent EFS. Enhanced poleward hydration of PFS begins between 50 deg S and 60 deg S latitude. Polar regolith temperature contrasts do not explain the suppression of epithermal neutrons on pole-facing slopes. The Supplemental on-line materials include supporting results derived from the uncollimated Lunar Prospector Neutron Spectrometer and the LEND Sensor for Epithermal Neutrons.

Ices↗
NASA NTRS2020

Goal-Oriented Architecture for Telescope Control Software

Modern telescope control systems control a multitude of sensors and actuators physically distributed across subsystems. Traditionally, control systems are specified to compute system outputs based on reference setpoints despite environmental or internal disturbances. The control strategies are typically tightly coupled and very prescriptive, defining how exactly the control is to be achieved. In a goal-oriented approach, the control system architecture emphasizes the operational aspect, specifying the behavior at a higher level in terms of operational goals, considering several aspects such as environmental conditions and required wavefront quality. The result is an architecture that can more autonomously handle different control strategies, taking into account systematically the physical states of the system which are relevant for control. This paper demonstrates the feasibility of a goal-oriented approach by analyzing four fundamental functions: pointing, tracking, offsetting, and dome vignetting. The resulting SysML analysis and design models are used to develop a software prototype for distributed telescope control. Typical operational scenarios are discussed and compared to the ESO Very Large Telescope control software architecture.

Karban, R.↗
NASA NTRSDate not supplied

Advanced Al Mirrors Protected with LiF Overcoat to Realize Stable Mirror Coatings for Astronomical Telescopes

Pure Aluminum (Al) exhibits intrinsic high reflectance over the proposed Large UV/Optical/IR (LUVOIR) Surveyor observatory target spectral range (90-2500 nm). However, Al coatings have to be protected from oxygen exposure in order to prevent the formation of the naturally occurring Al2O3 oxide layer, which limit performance for use only above 160 nm. Aluminum protected with fluorides such as LiF or MgF2 have been the most commonly used solutions. But below 102 nm and down to 90 nm, no transparent material is available to protect Al and coating mirror reflectance stays below 40%. But even above 102 nm, the reflectance of protected Al is limited by the residual absorption of the fluoride overcoats. Hence, this paper will report on recent advances in producing enhanced Al-based mirror coatings with the highest possible far-ultraviolet (FUV) reflectance, while exhibiting a more stable LiF protection layer. The process starts with a bare optically smooth glass substrate that is coated with Al in an ultra-high vacuum chamber by using the physical vapor deposition (PVD) process, which has been shown to provide the best aluminum thin-films when compared to other approaches. The next step is done by in-situ exposure of the freshly made Al film to a reactive XeF2 gas that will grant a thin AlF3 overcoat (2-3 nm) to the Al film that prevents further oxidation. This fluorinated Al film is then coated with a final layer of a LiF metal-fluoride overcoat. The coating process is finalized with a second exposure to the XeF2 precursor gas. The preparation of these mirror coatings will be studied and analyzed as a function of the XeF2 exposure time and deposition rate of the LiF layer during the PVD process. This paper will present and discuss characterization of a number of Al+XeLiF witness coupons produced with this reactive PVD (rPVD) process. These studies include characterization of specular reflectance in the 90-2500 nm spectral range, micro-roughness, long-term stability, as well as polarization characteristics in the visible and near-infrared spectral regions. These studies have been performed in order to demonstrate the improved reflectance performance, longer durability, and less hygroscopic nature of protected Al mirrors produced with the rPVD process (through exposure to XeF2) and in comparison with the standard PVD process.

optics↗
NASA NTRSDate not supplied

Evaluating a Cognitive Extension for the Licklider Transmission Protocol in a Spacecraft Emulation Testbed

In space communications, particularly when involving regions beyond cislunar space, the development of advanced networking solutions is essential to address the challenges posed by limited connectivity, substantial propagation delays, and radio signal variations. This study explores a data-driven approach to the Licklider Transmission Protocol (LTP), specifically focusing on dynamically adjusting the maximum payload size of segments. Prior research has emphasized the potential benefits of dynamically adjusting this parameter, introducing the concept of Cognitive LTP. This paper presents a software implementation of Cognitive LTP (CLTP) within an open-source Delay Tolerant Networking (DTN) framework, specifically the High-rate Delay Tolerant Networking (HDTN), and experimentally evaluates its performance under realistic space conditions. Leveraging the Cognitive Ground Testbed (CGT), developed by NASA GRC for spacecraft communication emulation, this study effectively bridges the gap between theoretical advancements and practical applications. By thoroughly analyzing CLTP’s functionality within the CGT, this research offers insights into the practical implications of adaptive networking strategies, emphasizing the importance of conducting tests in relevant environments for the maturation of space communication technologies.

Delay Tolerant Networking↗
DOE OSTI2021

Search for CPT and Lorentz invariance violation in the muon $g -2$ experiment at Fermilab

The Muon g-2 experiment at Fermilab (E989) aims to measure the anomalous magnetic moment of the muon, $a_{\mu}= (g-2)/2$, to a groundbreaking precision of $140$ ppb, obtaining a near four-fold increase in precision over the previous experiment, E821, at the Brookhaven National Laboratory (BNL). The value of $a_{\mu}$ from BNL currently differs from the Standard Model prediction by $\sim 3.7$ standard deviations, suggesting the potential for new physics and therefore, motivating a new experiment.Because the theory predicts this number with high precision, testing the g-factor through experiment provides a stringent test of the SM and can suggest physics beyond the Standard Model. The goal of the Fermilab Muon $g-2$ experiment is to increase the statistical precision by more than a factor of 20 and reduce systematic errors by a factor of 3. By measuring muon precession rate ($\omega_a$) in an external magnetic field, the anomalous magnetic moment will be calculated. This is an incredibly challenging experiment with a unique opportunity to provide new insight into nature. \\ The $g-2$ data also provides a great opportunity for setting the most stringent limits on some of the Standard Model Extension CPT Lorentz violating (LV) parameters in the muon sector. One of the CPT and Lorentz violating signatures that we can look for using $g-2$ data is a sidereal variation of $\omega_a(t)$. Extensive simulation studies confirm that the sensitivity regarding the sidereal varation roughly scales with $\omega_a$ uncertainty. Hence, the $g-2$ experiment at FNAL should be able to reach limits of $\sim 5\times10^{-25}$ GeV. Because the CPT and LV analyses are essentially studies of variations in $\omega_a$ as a function of time and charge, performing an $\omega_a$ analysis sets the stage for the CPT and LV measurement. This dissertation focuses on the methodology of a fully functioning framework and analyzing the Fermilab Muon $g - 2$ Run 2 data containing $\sim 11$ billion events above an energy threshold of $1.7$~GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Exploring the exact limits of the real-time equation-of-motion coupled cluster cumulant Green’s functions

In this paper, we analyze the properties of the recently proposed real-time equation-of-motion coupled-cluster (RT-EOM-CC) cumulant Green’s function approach [Rehr et al., J. Chem. Phys. 152, 174113 (2020)]. We specifically focus on identifying the limitations of the original time-dependent coupled cluster (TDCC) ansatz and propose an enhanced double TDCC ansatz, ensuring the exactness in the expansion limit. In addition, we introduce a practical cluster-analysis-based approach for characterizing the peaks in the computed spectral function from the RT-EOM-CC cumulant Green’s function approach, which is particularly useful for the assignments of satellite peaks when many-body effects dominate the spectra. Our preliminary numerical tests focus on reproducing, approximating, and characterizing the exact impurity Green’s function of the three-site and four-site single impurity Anderson models using the RT-EOM-CC cumulant Green’s function approach. The numerical tests allow us to have a direct comparison between the RT-EOM-CC cumulant Green’s function approach and other Green’s function approaches in the numerical exact limit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Use of Cardiac Imaging to Evaluate Cardiac Function and Pulmonary Hemodynamics in Patients with Heart Failure

Purpose of Review: Noninvasive hemodynamic assessments in patients with heart failure (HF) are essential for appropriate diagnosis and establishment of the best treatment strategies. Recently, the impact of pulmonary circulation and right ventricular function on prognosis in HF patients has drawn increasing attention. In this article, we explore the usefulness of cardiac imaging for hemodynamic assessments, mainly focusing on echocardiographic evaluation. Recent Findings: The reliability of Doppler echocardiography as a noninvasive alternative to Swan-Ganz catheterization has been well investigated with higher than 80% accuracy for estimating pulmonary artery pressure. Strain measurement and three-dimensional echocardiography are useful for evaluating right ventricular function together with pulmonary circulation. The accuracy of analyzing left and right ventricular functions by cardiac computed tomography and cardiac magnetic resonate imaging has also been established. These modalities can provide myocardial tissue information and allow calculation of the extracellular volume fraction as well. Summary: According to the rapid improvement of technologies, cardiac imaging has become an essential tool for hemodynamic evaluation in HF management.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2025

Monitoring of asteroids in cometary orbits and activated asteroids through archival images and new observations

Transitional objects are minor bodies that share some characteristics with asteroids and others with comets. These objects include asteroids in cometary orbits (ACOs), which behave dynamically like comets, but lack observed activity, while activated asteroids (AAs) follow typical asteroidal orbits, but have shown dust ejections. The monitoring of a set of these objects carried out in 2015 and 2016 is continued using archival images from various observatories and new data from the IMPACTON telescope in Brazil. Two techniques were applied to detect activity: (i) surface brightness profiles were compared with those of field stars to identify widening, and (ii) the magnitudes reported in the Minor Planet Center, combined with our observations, were reduced and analyzed to identify abrupt brightness increases as a function of heliocentric distance. We analyzed the surface brightness profiles of 133 ACOs and 7 AAs. To study the reduced magnitude, we obtained data from the 705 ACOs that were known at the time of the analysis. Together with the data from our previous work, our analysis covered 23% of the total known ACOs; 8 deviated slightly in the surface brightness profile, 6 brightened in the reduced magnitude, and one object is in common in both samples. A very low percentage of objects might show activity (4% of the sample with brightness profiles and <1% in the reduced magnitudes). These results would rule out a slow transition from active to inert. Regarding AAs, 4 showed activity, and 3 of them matched previously reported periods, while the data we analyzed for P/2015 X 6 were obtained 19 days before the first existing activity report. The activity episodes of these objects are very restricted in time and do not always occur in the same region of the orbit.

asteroids: general↗
NASA NTRS1984

Theoretical aspects of photoclinometric terrain profiling on the Galilean satellites

For large parts of the surfaces of the Galilean satellites there is no stereoscopic high resolution imagery, and so for shadow-free regions far from the terminator, the only method of obtaining topograpic information is photoclinometry, the technique of converting brightness variations into local surface tilts and hence into topographic profiles and contour maps. The conversion from brightness changes to slopes require knowledge of the angular photometric function for the type of planetary surface terrain being analyzed, i.e., the relationship describing the brightness of the surface as a function of the angles of incidence (I) and emergence (E) of light at a surface element. In order to investigate the effects of these changes on the shapes of topographic profiles deduced from the functions, an area of grooved terrain (lines 500-505, samples 550-650 on frame 20640.27 0060J2) using wide ranges of values of all the adjustable parameters in Hapke's new photometric function were analyzed.

Wilson, L.↗
DOE OSTI2025

Hydrogen Bond Benchmark: Focal‐Point Analysis and Assessment of DFT Functionals

We performed a hierarchical, convergent ab initio benchmark study and systematically analyzed the performance of density functional approximations for describing hydrogen bonds in small neutral, cationic, and anionic complexes, as well as in larger systems involving amide, urea, deltamide, and squaramide moieties. Focal point analyses (FPA), extrapolating to the ab initio limit, were carried out using correlated wave function methods up to CCSDT(Q) for the small complexes and CCSD(T) for the larger systems, together with correlation-consistent Gaussian basis sets up to the complete basis set limit. Optimized geometries and vibrational frequencies were obtained at the CCSD(T) level. The resulting FPA hydrogen-bond energies converge within a few tenths of a kcal mol −1 . These reference data were used to evaluate 60 density functionals (including 12 dispersion-corrected), spanning the local-density approximation (LDA), generalized gradient approximations (GGAs), meta-GGAs, hybrids, meta-hybrids, double-hybrids, and range-separated hybrids. Overall, the meta-hybrid M06-2X provides the best performance for both hydrogen bond energies and geometries, while the dispersion-corrected GGAs BLYP-D3(BJ) and BLYP-D4 also yield accurate hydrogen-bond data and can serve as cost-effective options for studying large and complex systems.

coupled cluster theory↗
NASA NTRS1993

An empirical comparison of a dynamic software testability metric to static cyclomatic complexity

This paper compares the dynamic testability prediction technique termed 'sensitivity analysis' to the static testability technique termed cyclomatic complexity. The application that we chose in this empirical study is a CASE generated version of a B-737 autoland system. For the B-737 system we analyzed, we isolated those functions that we predict are more prone to hide errors during system/reliability testing. We also analyzed the code with several other well-known static metrics. This paper compares and contrasts the results of sensitivity analysis to the results of the static metrics.

Voas, Jeffrey M.↗
NASA NTRS1984

Statistical structure of convective periods derived from satellite ground based data

The documentation of characteristics of Vertical Atmospheric Soundings (VAS) through the use of statistical structure and correlation functions is presented. A measure of random error is also provided. Rawinsonde data from various periods is analyzed. Structure and correlation functions are used to compare VAS retrievals obtained using a physical algorithm with those from a regression technique. Results from both procedures are evaluated against those from a mesoscale network of rawinsonde stations. The parameters documented include temperature, mixing ratio, geopotential height, thickness, and precipitable water. Calculation are performed at several layers in the lower and upper troposphere.

Meyer, P. J.↗
DOE OSTI2021

Resource selection functions based on hierarchical generalized additive models provide new insights into individual animal variation and species distributions

Habitat selection studies are designed to generate predictions of species distributions or inference regarding general habitat associations and individual variation in habitat use. Such studies frequently involve either individually indexed locations gathered across limited spatial extents and analyzed using resource selection functions (RSFs) or spatially extensive locational data without individual resolution typically analyzed using species distribution models. Both analytical methodologies have certain desirable features, but analyses that combine individual- and population-level inference with flexible non-linear functions may provide improved predictions while accounting for individual variation. Here, we describe how RSFs can be fit using hierarchical generalized additive models (HGAMs) using widely available software, providing a means to explore individual variation in habitat associations and to generate species distribution maps. We used GPS tracking data from golden eagles Aquila chrysaetos from across eastern North America with four environmental predictors to generate monthly distribution models. We considered three model structures that assumed different amounts of individual variation in the functional relationship between predictors and habitat use and used k-fold cross-validation to compare model performance. Models accounting for individual variability in shape and smoothness of functional responses performed best. Eagles exhibited the least amount of individual variation in response to land cover variables during winter months, with most individuals more closely adhering to the population-level trend. During the summer months, eagles exhibited more substantial individual variation in shape and smoothness of the functional relationships, suggesting some need to account for individual variation in eagle habitat use for both inferential and predictive purposes, during this time of year. Because they allow users to blend flexible functions with random effects structures and are well-supported by a variety of software platforms, we believe that HGAMs provide a useful addition to the suite of analyses used for modeling habitat associations or predicting species distributions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A Sequential Quadratic Programming Algorithm for Nonsmooth Problems with Upper- \({\boldsymbol{\mathcal{C}^2}}\) Objective

An optimization algorithm for nonsmooth nonconvex constrained optimization problems with upper- \({\boldsymbol{\mathcal{C}^2}}\) objective functions is proposed and analyzed. Upper- \({\boldsymbol{\mathcal{C}^2}}\) is a weakly concave property that exists in difference of convex (DC) functions and arises naturally in many applications, particularly certain classes of solutions to parametric optimization problems e.g., recourse of stochastic programming and projection onto closed sets. The algorithm can be viewed as an extension of sequential quadratic programming (SQP) to nonsmooth problems with upper- \({\boldsymbol{\mathcal{C}^2}}\) objectives or a simplified bundle method. It is globally convergent with bounded algorithm parameters that are updated with a trust-region criterion. The algorithm handles general smooth constraints through linearization and uses a line search to ensure progress. The potential inconsistencies from the linearization of the constraints are addressed through a penalty method. In conclusion, the capabilities of the algorithm are demonstrated by solving both simple upper- \({\boldsymbol{\mathcal{C}^2}}\) problems and a real-world optimal power flow problem used in current power grid industry practices.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2002

Efficient Reformulation of the Thermoelastic Higher-order Theory for Fgms

Functionally graded materials (FGMs) are characterized by spatially variable microstructures which are introduced to satisfy given performance requirements. The microstructural gradation gives rise to continuously or discretely changing material properties which complicate FGM analysis. Various techniques have been developed during the past several decades for analyzing traditional composites and many of these have been adapted for the analysis of FGMs. Most of the available techniques use the so-called uncoupled approach in order to analyze graded structures. These techniques ignore the effect of microstructural gradation by employing specific spatial material property variations that are either assumed or obtained by local homogenization. The higher-order theory for functionally graded materials (HOTFGM) is a coupled approach developed by Aboudi et al. (1999) which takes the effect of microstructural gradation into consideration and does not ignore the local-global interaction of the spatially variable inclusion phase(s). Despite its demonstrated utility, however, the original formulation of the higher-order theory is computationally intensive. Herein, an efficient reformulation of the original higher-order theory for two-dimensional elastic problems is developed and validated. The use of the local-global conductivity and local-global stiffness matrix approach is made in order to reduce the number of equations involved. In this approach, surface-averaged quantities are the primary variables which replace volume-averaged quantities employed in the original formulation. The reformulation decreases the size of the global conductivity and stiffness matrices by approximately sixty percent. Various thermal, mechanical, and combined thermomechanical problems are analyzed in order to validate the accuracy of the reformulated theory through comparison with analytical and finite-element solutions. The presented results illustrate the efficiency of the reformulation and its advantages in analyzing functionally graded materials.

Bansal, Yogesh↗
NASA NTRS1997

Structural and functional analyses of human cerebral cortex using a surface-based atlas

We have analyzed the geometry, geography, and functional organization of human cerebral cortex using surface reconstructions and cortical flat maps of the left and right hemispheres generated from a digital atlas (the Visible Man). The total surface area of the reconstructed Visible Man neocortex is 1570 cm2 (both hemispheres), approximately 70% of which is buried in sulci. By linking the Visible Man cerebrum to the Talairach stereotaxic coordinate space, the locations of activation foci reported in neuroimaging studies can be readily visualized in relation to the cortical surface. The associated spatial uncertainty was empirically shown to have a radius in three dimensions of approximately 10 mm. Application of this approach to studies of visual cortex reveals the overall patterns of activation associated with different aspects of visual function and the relationship of these patterns to topographically organized visual areas. Our analysis supports a distinction between an anterior region in ventral occipito-temporal cortex that is selectively involved in form processing and a more posterior region (in or near areas VP and V4v) involved in both form and color processing. Foci associated with motion processing are mainly concentrated in a region along the occipito-temporal junction, the ventral portion of which overlaps with foci also implicated in form processing. Comparisons between flat maps of human and macaque monkey cerebral cortex indicate significant differences as well as many similarities in the relative sizes and positions of cortical regions known or suspected to be homologous in the two species.

NASA Discipline Neuroscience↗