Search NASA⌕ Search

SEARCH · Search NASA

Results for “angular correlations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Nucleus morphology of Comet Halley

Images obtained by the Halley multicolor camera were used to determine the projected size and shape of the nucleus. The location of the terminator and numerous surface features were determined. There is good correlation between the brightest surface features and the dust jets; however, many bright features are seen which are not associated with jets. Most of the observed features are circular and appear to be related to surface elevation. The angularity of the terminator gives an indication of the three-dimensional structure of the face which was observed.

Reitsema, H. J.↗

Remote Sensing of Cloud Top Heights Using the Research Scanning Polarimeter

Clouds cover roughly two thirds of the globe and act as an important regulator of Earth's radiation budget. Of these, multilayered clouds occur about half of the time and are predominantly two-layered. Changes in cloud top height (CTH) have been predicted by models to have a globally averaged positive feedback, however observational changes in CTH have shown uncertain results. Additional CTH observations are necessary to better and quantify the effect. Improved CTH observations will also allow for improved sub-grid parameterizations in large-scale models and accurate CTH information is important when studying variations in freezing point and cloud microphysics. NASA's airborne Research Scanning Polarimeter (RSP) is able to measure cloud top height using a novel multi-angular contrast approach. RSP scans along the aircraft track and obtains measurements at 152 viewing angles at any aircraft location. The approach presented here aggregates measurements from multiple scans to a single location at cloud altitude using a correlation function designed to identify the location-distinct features in each scan. During NASAs SEAC4RS air campaign, the RSP was mounted on the ER-2 aircraft along with the Cloud Physics Lidar (CPL), which made simultaneous measurements of CTH. The RSPs unique method of determining CTH is presented. The capabilities of using single and combinations of channels within the approach are investigated. A detailed comparison of RSP retrieved CTHs with those of CPL reveal the accuracy of the approach. Results indicate a strong ability for the RSP to accurately identify cloud heights. Interestingly, the analysis reveals an ability for the approach to identify multiple cloud layers in a single scene and estimate the CTH of each layer. Capabilities and limitations of identifying single and multiple cloud layers heights are explored. Special focus is given to sources of error in the method including optically thin clouds, physically thick clouds, multi-layered clouds as well as cloud phase. When determining multi-layered CTHs, limits on the upper clouds opacity are assessed.

Cloud height indicators↗

Finite Element Aircraft Simulation of Turbulence

A turbulence model has been developed for realtime aircraft simulation that accommodates stochastic turbulence and distributed discrete gusts as a function of the terrain. This model is applicable to conventional aircraft, V/STOL aircraft, and disc rotor model helicopter simulations. Vehicle angular activity in response to turbulence is computed from geometrical and temporal relationships rather than by using the conventional continuum approximations that assume uniform gust immersion and low frequency responses. By using techniques similar to those recently developed for blade-element rotor models, the angular-rate filters of conventional turbulence models are not required. The model produces rotational rates as well as air mass translational velocities in response to both stochastic and deterministic disturbances, where the discrete gusts and turbulence magnitudes may be correlated with significant terrain features or ship models. Assuming isotropy, a two-dimensional vertical turbulence field is created. A novel Gaussian interpolation technique is used to distribute vertical turbulence on the wing span or lateral rotor disc, and this distribution is used to compute roll responses. Air mass velocities are applied at significant centers of pressure in the computation of the aircraft's pitch and roll responses.

McFarland, R. E.↗

Prediction of Turbulence-Generated Noise in Unheated Jets: JeNo Technical Manual (Version 1.0) - Part 1

The model-based approach, used by the JeNo code to predict jet noise spectral directivity, is described. A linearized form of Lilley's equation governs the non-causal Green s function of interest, with the non-linear terms on the right hand side identified as the source. A Reynolds-averaged Navier-Stokes (RANS) solution yields the required mean flow for the solution of the propagation Green s function in a locally parallel flow. The RANS solution also produces time- and length-scales needed to model the non-compact source, the turbulent velocity correlation tensor, with exponential temporal and spatial functions. It is shown that while an exact non-causal Green s function accurately predicts the observed shift in the location of the spectrum peak with angle as well as the angularity of sound at low to moderate Mach numbers, the polar directivity of radiated sound is not entirely captured by this Green s function at high subsonic and supersonic acoustic Mach numbers. Results presented for unheated jets in the Mach number range of 0.51 to 1.8 suggest that near the peak radiation angle of high-speed jets, a different source/Green s function convolution integral may be required in order to capture the peak observed directivity of jet noise. A sample Mach 0.90 heated jet is also discussed that highlights the requirements for a comprehensive jet noise prediction model.

Khavaran, Abbas↗

Observation of low energy protons in the geomagnetic tail at lunar distances

Three suprathermal ion detectors stationed on the moon were used to detect a region of plasma flowing antisunward along the ordered field lines of the geomagnetic tail, exterior to the plasma sheet. The particle flow displays an integral flux, a bulk velocity, temperatures, and number densities uniquely different from the other particle regimes traversed by the moon. No consistent deviation in the field was found to correspond with the occurrence of the events, which have an angular distribution extending between 50 and 100 deg and a spatial distribution over a wide region in both the Y sub sm and Z sub sm directions. The duration of observable particles varies widely between tail passages, with an apparent correlation between the number of hours of observation and the Kp index averages over these times. It is proposed that these particles may have entered through the cusp region.

Hardy, D. A.↗

A search for hard X-rays from five strong extragalactic radio sources

Data from the University of California at San Diego (UCSD) hard X-ray instrument on OSO-7 have been used to search the regions containing 3C 390.3, M87, 3C 273, 3C 111, and 3C 129. We have a weak detection of 3C 390.3 and a possible detection of 3C 111. Sensitive upper limits on hard X-rays have been obtained for the other objects. The available observational data indicate a correlation between hard X-ray emission, self-absorbed gigahertz radio emission, and strong optical emission lines in extragalactic sources. Self-Compton X-ray models have been calculated for the sources observed in this paper, and the angular sizes, lifetimes, and B fields in these sources have been estimated. These model calculations agree with existing VLBI and time variability data.

Mushotzky, R. F.↗

Galactic and extragalactic contributions to the far-ultraviolet background

Data from the 1350-1550 A bandpass channel of the 2.5-deg angular resolution extreme-ultraviolet telescope on the Apollo-Soyuz mission have been analyzed for stellar and airglow radiation contributions for the galactic latitude range above 30 deg. At intermediate latitudes, the resulting diffuse background is found to be correlated with the neutral hydrogen column density as determined by 21 cm radio data. This result, together with the observed anisotropy and mean intensity of the radiation field, is consistent with the hypothesis that scattering of galactic-plane starlight off dust grains having an albedo of 0.5 and a phase function coefficient of 0.5 is the primary source of the observed radiation field at the intermediate latitudes. The background intensity near the poles is, however, higher than expected from the H I column density and extinction measurements.

Paresce, F.↗

Spatially extended measurements of magnetic field strength in solar plages

The study determines magnetic field strengths along one spatial dimension of a plage region from circularly polarized (Stokes V) spectra of a highly Zeeman-sensitive iron line at 6388.6/cm (1.565 micron). The measured fields are found to lie primarily in the range 1200-1700 G. The mean formal precision for a single determination is +/-65 G. More than 90 percent of the magnetic flux is kilogauss-strength fields. The field strength is coherently organized on spatial scales from 1 arcmin to the limit of angular resolution (2 arcsec). It is inferred from the amplitude of the V signal that the spatial filling factor of the strong-field elements can approach 0.5 within a 2-arcsec resolution element. Magnetic field strength and amplitude are correlated in the sense that locations with stronger mean fields have larger V amplitudes, but the relationship shows more scatter than can be explained by errors in measurement. The individual sigma-components of the V profile are broader than an average quiet-sun line profile would produce by an amount corresponding to 625 G or 4.1 km/s; Zeeman broadening due to a range of magnetic field strength within the resolution element is proposed as the likely explanation.

Rabin, Douglas↗

Spatial variations of ocean wave directional spectra from the Seasat synthetic aperture radar

Seasat synthetic aperture radar ocean wave spectra for a 900-km pass are analyzed and interpreted in the context of both their probable generation sources and their surface current and bathymetric modifiers. Systematic vector wavenumber variations of several times the standard error of determination (about 1.5 percent in magnitude and 0.9 deg in direction) occur along the entire 900-km pass. The large-scale spatial variation of a 200-m swell system can be accurately accounted for as a result of dispersion from a distant storm. The more local variations are qualitatively well correlated in position with known currents and bathymetry but show systematic biases that appear partly due to an environmentally dependent instrument transfer function in the regions of high current and highest sea state. There is also substantial evidence that a large angular deviation in the center of the pass is the result of a mesoscale eddy just to the east.

Beal, R. C.↗

Radiation Protection Effectiveness of Polymeric Based Shielding Materials at Low Earth Orbit

Correlations of limited ionizing radiation measurements onboard the Space Transportation System (STS; shuttle) and the International Space Station (ISS) with numerical simulations of charged particle transport through spacecraft structure have indicated that usage of hydrogen rich polymeric materials improves the radiation shielding performance of space structures as compared to the traditionally used aluminum alloys. We discuss herein the radiation shielding correlations between measurements on board STS-81 (Atlantis, 1997) using four polyethylene (PE) spheres of varying radii, and STS-89 (Endeavour, 1998) using aluminum alloy spheres; with numerical simulations of charged particle transport using the Langley Research Center (LaRC)-developed High charge (Z) and Energy TRaNsport (HZETRN) algorithm. In the simulations, the Galactic Cosmic Ray (GCR) component of the ionizing radiation environment at Low Earth Orbit (LEO) covering ions in the 1< or equals Z< or equals 28 range is represented by O'Neill's (2004) model. To compute the transmission coefficient for GCR ions at LEO, O'Neill's model is coupled with the angular dependent LaRC cutoff model. The trapped protons/electrons component of LEO environment is represented by a LaRC-developed time dependent procedure which couples the AP8min/AP8max, Deep River Neutron Monitor (DRNM) and F10.7 solar radio frequency measurements. The albedo neutron environment resulting from interaction of GCR ions with upper atmosphere is modeled through extrapolation of the Atmospheric Ionizing Radiation (AIR) measurements. With the validity of numerical simulations through correlation with PE and aluminum spheres measurements established, we further present results from the expansion of the simulations through the selection of high hydrogen content commercially available polymeric constituents such as PE foam core and Spectra fiber(Registered TradeMark) composite face sheet to assess their radiation shield properties as compared to generic PE.

Badavi, Francis F.↗

Influence of the neutral sheet on the Swinson's type north-south anisotropy of cosmic rays

The relations between the north-south anisotropy of cosmic rays and/or nucleonic intensity variation and the latitudinal angular distance (lambda) of the Earth from the neutral sheet is examined using the data in the period from Apr. 1976 to Aug. 1977 at the solar minimum. It is found that the nucleonic intensity variation of the cosmic rays has no correlation with sin lambda in this period as shown in a correlation diagram; but the amplitude of the north-south anisotropy is fairly correlated with sin lambda as shown in another diagram.

Munakata, Y.↗

A search for anisotropy in the cosmic microwave radiation at medium angular scales

The results are reported from a search for anisotropy in the cosmic microwave radiation (CMR) at angular scales of 0.5 to 5 deg. No temperature fluctuations are detected, and limits are placed on intrinsic CMR anisotropy. These limits are expressed in terms of two models which describe the temperature fluctuations. For models specified by a Gaussian-shaped correlation function, the fluctuation amplitude is found to be 1.1 x 10 to the -4th or less at 1.1 deg; for models with monochromatic fluctuations it is 7.5 x 10 to the -5th or less at 1.7 deg. These limits satisfy the likelihood ratio test at the 95 percent confidence level. The implications of the results for large-scale structure information scenarios are discussed.

Timbie, Peter T.↗

The equatorial rotation rate of the supergranulation cells

The equatorial rotation rate of the supergranulation cells has been observed to be 14.72 plus or minus 0.07 deg/day. Velocity patterns observed at different times are cross-correlated to derive the rotation rate. The observed rate is 3% faster than recent observations of the surface rotation rate by Doppler shifts. The difference between the cell rate and surface rate is consistent with a model of the supergranular convection in which angular momentum per unit mass is conserved in the radial flow (Foukal, 1977).

Duvall, T. L., Jr.↗

Magnetic fields in late-type stars

Observations show that magnetic activity in late-type stars is correlated with rotation rates and that there is a discontinuous change in behavior at a critical rotation period. This can be explained as a consequence of a transition from convection in rolls parallel to the rotation axis to normal convection cells as the angular velocity is decreased.

Knobloch, E.↗

The large scale dust distribution in the inner galaxy

Initial results are presented from a new large-scale survey of the first quadrant of the galactic plane at wavelengths of 160, 260, and 300 microns. The submillimeter wavelength emission, interpreted as thermal radiation by dust grains, reveals an optically thin disk of angular width about 0.09 deg (FWHM) with a mean dust temperature of 23 K and significant variation of the dust mass column density. Comparison of the dust column density with the gas column density inferred from CO survey data shows a striking spatial correlation. The mean luminosity per hydrogen atom is found to be 2.5 x 10 to the -30th W/H, implying a radiant energy density in the vicinity of the dust an order of magnitude larger than in the solar neighborhood. The data favor dust in molecular clouds as the dominant submillimeter radiation source.

Hauser, M. G.↗

The evolution of cataclysmic and low-mass X-ray binaries

The observational data for the 124 cataclysmic and low-mass X-ray binaries of known orbital period are compiled. It is found that the eruption properties are very well correlated with the orbital periods, in a manner that suggests that the mass transfer is the all-important determinant of evolution and of the eruptive behavior. Transfer rates of 10 to the -11th to 10 to the -7th solar mass/year are found, which are well correlated with orbital period. It is concluded that the mechanism which drives these systems is the magnetic braking of the secondary's rotation by its own stellar wind, coupled with the enforcement of synchronous rotation by tidal friction. This permits CVs to lose sufficient angular momentum to begin mass transfer in a reasonable time and drives the mass transfer at a high rate once it begins. An account of the long-lived phases of CV evolution is given.

Patterson, J.↗

Combining Passive Thermography and Acoustic Emission for Large Area Fatigue Damage Growth Assessment of a Composite Structure

Passive thermography and acoustic emission data were obtained for improved real time damage detection during fatigue loading. A strong positive correlation was demonstrated between acoustic energy event location and thermal heating, especially if the structure under load was nearing ultimate failure. An image processing routine was developed to map the acoustic emission data onto the thermal imagery. This required removing optical barrel distortion and angular rotation from the thermal data. The acoustic emission data were then mapped onto thermal data, revealing the cluster of acoustic emission event locations around the thermal signatures of interest. By combining both techniques, progression of damage growth is confirmed and areas of failure are identified. This technology provides improved real time inspections of advanced composite structures during fatigue testing.Keywords: Thermal nondestructive evaluation, fatigue damage detection, aerospace composite inspection, acoustic emission, passive thermography

Zalameda, Joseph N.↗

Effects of vegetation canopy on the radar backscattering coefficient

Airborne L- and C-band scatterometer data, taken over both vegetation-covered and bare fields, were systematically analyzed and theoretically reproduced, using a recently developed model for calculating radar backscattering coefficients of rough soil surfaces. The results show that the model can reproduce the observed angular variations of radar backscattering coefficient quite well via a least-squares fit method. Best fits to the data provide estimates of the statistical properties of the surface roughness, which is characterized by two parameters: the standard deviation of surface height, and the surface correlation length. In addition, the processes of vegetation attenuation and volume scattering require two canopy parameters, the canopy optical thickness and a volume scattering factor. Canopy parameter values for individual vegetation types, including alfalfa, milo and corn, were also determined from the best-fit results. The uncertainties in the scatterometer data were also explored.

Mo, T.↗