Search NASA⌕ Search

SEARCH · Search NASA

Results for “anode catalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Preparation and evaluation of advanced catalysts for phosphoric acid fuel cells

The platinum electrocatalysts were characterized for their crystallite sizes and the degree of dispersion on the carbon supports. One application of these electrocatalysts was for anodic oxidation of hydrogen in hot phosphoric acid fuel cells, coupled with the influence of low concentrations of carbon monoxide in the fuel gas stream. In a similar way, these platinum on carbon electrocatalysts were evaluated for oxygen reduction in hot phosphoric acid. Binary noble metal alloys were prepared for anodic oxidation of hydrogen and noble metal-refractory metal mixtures were prepared for oxygen reduction. An exemplar alloy of platinum and palladium (50/50 atom %) was discovered for anodic oxidation of hydrogen in the presence of carbon monoxide, and patent disclosures were submitted. For the cathode, platinum-vanadium alloys were prepared showing improved performance over pure platinum. Preliminary experiments on electrocatalyst utilization in electrode structures showed low utilization of the noble metal when the electrocatalyst loading exceeded one weight percent on the carbon.

Stonehart, P.↗
DOE OSTI2022

Surface oxygenation induced strong interaction between Pd catalyst and functional support for zinc–air batteries

Employing the strong metal-support interaction (SMSI) effect for promoting the catalyst's activity toward the oxygen reduction reaction (ORR) is promising due to the electronic structure optimization and high utilization efficiency of platinum group metal (PGM) catalysts. Metal oxides as alternative supports for PGMs facilitate intrinsic activity and improve durability as compared to conventional carbon supports. However, the restricted mass and electron transfer at the metal/support interface need to be addressed. Herein, to strengthen the interaction at the metal/support interfaces and improve the utilization efficiency of PGM, an ultralow loading of Pd was embedded in a surface-oxygenated PdNiMnO porous film. The Mn-doping was designed to promote surface oxygenation using a facile anodization process that created sufficiently exposed interfaces between Pd and the support, strengthening the SMSI effects at the Pd/oxygenated support interface for enhancing ORR performance. Furthermore, the Ni-containing oxygenated catalyst served as both the active component for the oxygen evolution reaction (OER) and the functional support for stabilizing Pd, making PdNiMnO a bifunctional catalyst for zinc–air flow batteries (ZAFB). As a proof-of-concept, the ZAFB (PdNiMnO) shows a maximal power density of 211.6 mW cm –2 and outstanding cycling stability for over 2000 h with a minimal voltage gap of 0.69 V at a current density of 10 mA cm –2 , superior to the state-of-the-art catalysts.

25 ENERGY STORAGE↗
NASA NTRS2013

Pt-Ni and Pt-Co Catalyst Synthesis Route for Fuel Cell Applications

Oxygen reduction reactions (ORRs) at the cathode are the rate-limiting step in fuel cell performance. The ORR is 100 times slower than the corresponding hydrogen oxidation at the anode. Speeding up the reaction at the cathode will improve fuel cell efficiency. The cathode material is generally Pt powder painted onto a substrate (e.g., graphite paper). Recent efforts in the fuel cell area have focused on replacing Pt with Pt-X alloys (where X = Co, Ni, Zr, etc.) in order to (a) reduce cost, and (b) increase ORR rates. One of these strategies is to increase ORR rates by reducing the powder size, which would result in an increase in the surface area, thereby facilitating faster reaction rates. In this work, a process has been developed that creates Pt-Ni or Pt-Co alloys that are finely divided (on the nano scale) and provide equivalent performance at lower Pt loadings. Lower Pt loadings will translate to lower cost. Precursor salts of the metals are dissolved in water and mixed. Next, the salt mixtures are dried on a hot plate. Finally, the dried salt mixture is heattreated in a furnace under flowing reducing gas. The catalyst powder is then used to fabricate a membrane electrode assembly (MEA) for electrochemical performance testing. The Pt- Co catalyst-based MEA showed comparable performance to an MEA fabri cated using a standard Pt black fuel cell catalyst. The main objective of this program has been to increase the overall efficiencies of fuel cell systems to support power for manned lunar bases. This work may also have an impact on terrestrial programs, possibly to support the effort to develop a carbon-free energy source. This catalyst can be used to fabricate high-efficiency fuel cell units that can be used in space as regenerative fuel cell systems, and terrestrially as primary fuel cells. Terrestrially, this technology will become increasingly important when transition to a hydrogen economy occurs.

Firdosy, Samad A.↗
DOE OSTI2026

Controlled Acidity Gradients Enable CO 2 Reduction to Formic Acid (Not Formate) by Molecular Electrocatalysts

Neutral or basic conditions are commonly required for the selective electrochemical reduction of CO 2 , leading to the accumulation of carbonate salts and the generation of formate rather than formic acid. A generalizable strategy for obtaining formic acid (not formate) in the electroreduction of CO 2 with molecular catalysts is introduced, based on controlling acidity gradients using a dual-electrolyte cell with a proton-exchange membrane. This approach uses anodic water oxidation as the source of protons and electrons for CO 2 reduction to formic acid, while mitigating H 2 evolution near the cathode and avoiding carbonate formation. Mechanistic studies, including systems modeling, provide insight into the origin of the formic acid selectivity and guide the broader implementation of this strategy in molecular electrocatalysis for CO 2 utilization.

Alcohols↗
NASA NTRS1991

Development of a 300 Amp-hr high rate lithium thionyl chloride cell

The development of a high-rate lithium thionyl chloride cylindrical cell with parallel plate electrodes is discussed. The development was divided into three phases: phase 1, a 150 Amp/hour low rate (1 mA/sq cm) design; phase 2, a 25 Amp/hour high rate (5 mA/sq cm) design; and phase 3, a 300 Amp/hour high rate (5 mA/sq cm) design. The basic design is the same for all three cells. The electrodes are perpendicular to the axis of the cylinder. Multiple electrodes are bussed up the side of the cylinder, 180 deg apart allowing excellent anode and cathode utilization. It is a lithium limited design with excess electrolyte. The cathode is Shawinigan or Gulf Acetylene black with no catalyst. The electrolyte is 1.8 Molar lithium tetrachloroaluminate (LiAlCl4) in thionyl chloride. All cell cases are 304L Stainless Steel with a BS&B burst disc.

Boyle, Gerard H.↗
DOE OSTI2025

Synergy between Ni and Fe in NiFe aerogel oxygen evolution reaction catalyst: in situ 57 Fe Mössbauer and X-ray absorption spectroscopy studies

Anion-exchange-membrane water electrolyzers (AEMWE) for hydrogen production have attracted interest because cost-effective Ni- and Fe-based catalysts can be used for the oxygen evolution reaction (OER). Although NiFe oxide/hydroxide-based catalysts have been extensively studied, the role of Fe and its chemical state during OER are not well understood, with inconsistent findings across different studies. In this work, we combined in situ 57 Fe Mössbauer (MS) and X-ray absorption spectroscopy (XAS) to investigate the chemical states of Fe and Ni and elucidate their synergy during the OER. A NiFe (8 : 1 molar ratio) aerogel catalyst with high surface area, nano crystallinity, and high performance in AEMWE was used. We show that both Fe and Ni are oxidized during anodic polarization, and the potential for the change of oxidation states correlates well with the onset of the OER. In situ MS shows that 80–90% of Fe 3+ becomes tetravalent at OER potentials and remains so even after the potential is lowered below OER onset. Analysis of in situ XAS results suggests full Fe incorporation into Ni hydroxide. At OER potentials, lattice contraction indicates high oxidation states for both Ni and Fe. Upon returning to lower potentials, a portion of the Fe remains in its more oxidized form which corroborates the in situ MS findings. Results from this work affirm the importance of high-valent Ni and Fe in promoting the OER. Ni and Fe exhibit synergy during OER and the aerogel's unique nanomorphology leads to high OER activity.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Advanced PEM Electrolyzer Membrane for Hydrogen Crossover Mitigation

An unintended reaction in the electrochemical conversion of water to hydrogen in proton exchange membrane (PEM) electrolyzers is the crossover of hydrogen from the anode to the oxygen-containing cathode through the membrane, creating hydrogen losses and safety concerns. Efforts to date have focused on embedding platinum catalysts in perfluorosulfonic (PFSA) membranes to convert H 2 to protons. The objective of this project is to design and develop hydrocarbon (HC) proton exchange membranes (PEMs) that can help overcome the risk of high H 2 crossover in current PEM electrolyzer (ELX) stacks by designing and optimizing the gas recombination catalyst (GRC) within the membrane and membrane electrode assembly (MEA) structure.

08 HYDROGEN↗
NASA NTRS1993

Near-ambient solid polymer fuel cell

Fuel cells are extremely attractive for extraterrestrial and terrestrial applications because of their high energy conversion efficiency without noise or environmental pollution. Among the various fuel cell systems the advanced polymer electrolyte membrane fuel cells based on sulfonated fluoropolymers (e.g., Nafion) are particularly attractive because they are fairly rugged, solid state, quite conductive, of good chemical and thermal stability and show good oxygen reduction kinetics due to the low specific adsorption of the electrolyte on the platinum catalyst. The objective of this program is to develop a solid polymer fuel cell which can efficiently operate at near ambient temperatures without ancillary components for humidification and/or pressurization of the fuel or oxidant gases. During the Phase 1 effort we fabricated novel integral electrode-membrane structures where the dispersed platinum catalyst is precipitated within the Nafion ionomer. This resulted in electrode-membrane units without interfacial barriers permitting unhindered water diffusion from cathode to anode. The integral electrode-membrane structures were tested as fuel cells operating on H2 and O2 or air at 1 to 2 atm and 10 to 50 C without gas humidification. We demonstrated that cells with completely dry membranes could be self started at room temperature and subsequently operated on dry gas for extended time. Typical room temperature low pressure operation with unoptimized electrodes yielded 100 mA/cm(exp 2) at 0.5V and maximum currents over 300 mA/cm(exp 2) with low platinum loadings. Our results clearly demonstrate that operation of proton exchange membrane fuel cells at ambient conditions is feasible. Optimization of the electrode-membrane structure is necessary to assess the full performance potential but we expect significant gains in weight and volume power density for the system. The reduced complexity will make fuel cells also attractive for smaller and portable power supplies and as replacement for batteries.

Holleck, G. L.↗
NASA NTRS2004

Electrochemical Reconstitution of Biomolecules for Applications as Electrocatalysts for the Bionanofuel Cell

Platinum-cored ferritins were synthesized as electrocatalysts by electrochemical biomineralization of immobilized apoferritin with platinum. The platinum cored ferritin was fabricated by exposing the immobilized apoferritin to platinum ions at a reduction potential. On the platinum-cored ferritin, oxygen is reduced to water with four protons and four electrons generated from the anode. The ferritin acts as a nano-scale template, a biocompatible cage, and a separator between the nanoparticles. This results in a smaller catalyst loading of the electrodes for fuel cells or other electrochemical devices. In addition, the catalytic activity of the ferritin-stabilized platinum nanoparticles is enhanced by the large surface area and particle size phenomena. The work presented herein details the immobilization of ferritin with various surface modifications, the electrochemical biomineralization of ferritin with different inorganic cores, and the fabrication of self-assembled 2-D arrays with thiolated ferritin.

Kim, Jae-Woo↗
DOE OSTI2022

Selenium-doped copper oxide nanoarrays: Robust electrocatalyst for the oxygen evolution reaction with ultralow overpotential

The oxygen evolution reaction (OER) is the key anodic reaction in electrochemical water splitting. OER is a four-electron process with sluggish reaction kinetics. RuO 2 and IrO 2 are the benchmark catalysts for OER. Thus, finding a low-cost, earth-abundant, and stable electrocatalyst for OER is a big challenge. Here in this work, we report OER over Se-CuO/CF nanoarrays with an ultralow overpotential of 440 mV (at 50 mA/cm 2 current density). Se-CuO/CF nanoarray has a TOF of 0.05 s -1 at 300 mV. The catalyst showed consistent OER performance upto1000 cycles run over a period of 10 h. The OER performance of Se-CuO/CF nanoarrays was compared with RuO 2 /CF catalyst and the overpotential for RuO 2 /CF nanoarray was only 10 mV lower than Se-CuO/CF 50 mA/cm 2 current density. Se-CuO/CF nanoarray showed 50 mV lower overpotential than the state of the art RuO 2 /CF catalyst at a current density of 100 mA/cm 2 . The Tafel slope of Se-CuO/CF is 21 mV/decade lower compared to RuO 2 /CF suggesting faster reaction kinetics of Se-CuO/CF. The electrochemical surface area and the conductivity were increased upon doping Se into CuO/CF nanoarrays which can be attributed to enhanced OER performance of the Se-CuO/CF nanoarrays.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Long term durability test and post mortem for metal-supported solid oxide electrolysis cells

Hydrogen is a renewable energy carrier, and electrolysis to split water is the most environmentally friendly method to produce hydrogen. This work reports long-term durability and degradation mode analysis for metal-supported solid oxide electrolysis cells (MS-SOECs). Catalyst screening showed that MS-SOECs with composite electrode catalysts (samarium-doped ceria-nickel [SDC-Ni] serving as a fuel electrode catalyst, and praseodymium oxide [PrO x ]-SDC or La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 [LSCF]-SDC serving as an air electrode catalyst) exhibit the highest electrochemical performance at 700 °C. The degradation rate of cells with LSCF-SDC as the air electrode catalyst was as low as 1.3%/100 h in long term durability tests at a current density of 0.33 A cm -2 , in contrast to rapid degradation observed for a cell with a PrO x -SDC air electrode. Furthermore, post-mortem analysis reveals the degradation is dependent on the primary modes of fuel electrode catalyst coarsening and Cr poisoning on the air electrode catalyst, as well as secondary modes of oxidation of the metal support and local elemental accumulation of Ni. Other degradation modes reported in conventional anode-supported SOECs, such as Ni migration, foreign element contamination, delamination of the cell, and nano-voids on the electrolyte, are not observed in the present MS-SOECs.

25 ENERGY STORAGE↗
DOE OSTI2025

A Cocatalytic System for Electrooxidation of Primary, Secondary, and Benzyl Alcohols Based on a Triruthenium Oxo-Centered Cluster and NHPI

Increasing interest in alternative methods for fuel generation and chemical synthesis has resulted in an increased focus on the development of electrocatalysts for energy relevant small molecule transformations, such as the oxidation of methanol. Partial methanol oxidation is a crucial step in the generation of the commodity chemical formaldehyde, and its complete oxidation to carbon dioxide can also serve as the anodic reaction in direct methanol fuel cells. We report a coelectrocatalytic system comprised of an oxo-centered triruthenium cluster (Ru 3 O) as the catalyst, with the electro-generated N-phthalimido-N-oxyl (PINO) radical species acting as a redox mediator. Only a mild Brønsted base, 2,6-lutidine, is required to achieve an electrocatalytic response. The cocatalytic system demonstrates remarkable cooperativity, shifting the oxidation potential of MeOH (Ep) less positive by ca. 0.5 V compared to the intrinsic response of the Ru 3 O complex. Controlled potential electrolysis on a model substrate, 4-trifluoromethylbenzyl alcohol, demonstrates selective production of the two-electron, two-proton aldehyde product with a Faradaic efficiency of 79 ± 11% at a rate of 3.14 s –1 . The rate of cocatalysis is 50-fold greater than the intrinsic activity of Ru3O and 26-fold greater than that of PINO alone under otherwise identical conditions. Mechanistic studies reveal the oxidation of a Ru 3 O–alkoxide species as the potential-determining step, while two possible rate-determining steps are identified depending on the substrate. A preference for sterically uninhibited electron-rich benzyl alcohol substrates suggests that a H atom transfer from the Ru 3 O–alkoxide adduct to PINO is rate-determining, while the lack of an observed kinetic isotope effect using deuterated MeOH suggests the oxidation of the Ru 3 O–alkoxide species is both rate- and potential-determining for cocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural Characterization of the Platinum Nanoparticle Hydrogen-Evolving Catalyst Assembled on Photosystem I by Light-Driven Chemistry

Directed assembly of abiotic catalysts onto biological redox protein frameworks is of interest as an approach for the synthesis of biohybrid catalysts that combine features of both synthetic and biological materials. In this report, we provide a multiscale characterization of the platinum nanoparticle (NP) hydrogen-evolving catalysts that are assembled by light-driven reductive precipitation of platinum from an aqueous salt solution onto the photosystem I protein (PSI), isolated from cyanobacteria as trimeric PSI. The resulting PSI-NP assemblies were analyzed using a combination of X-ray energy-dispersive spectroscopy (XEDS), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), small-angle X-ray scattering (SAXS), and high-energy X-ray scattering with atomic pair distribution function (PDF) analyses. The results show that the PSI-supported NPs are approximately 1.8 nm diameter disk-shaped particles that assemble at discrete sites with 145 Å separation. This separation is too large to be consistent with NP nucleation and growth at a site adjacent to the F B cofactor site. Instead, we suggest a mechanism for NP growth at hydrophobic sites on the PSI stromal surface. The NPs photoreductively assembled on the PSI stromal surface are found to be analogous to the nanostructures produced by successive cycles of atomic layer deposition (ALD) of platinum onto 40 nm porous anodic alumina oxide supports, although the mechanisms for nucleation appear to differ. In conclusion, this work establishes a foundation for the investigation of the reductive assembly of abiotic metal catalysts at sites connected to photochemically reducing equivalent production in PSI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Towards a Unified Low-Cost Flow Plate, Flow-Field, PTL Solution for Proton Exchange Membrane Electrolyzers

Proton exchange membrane (PEM) water electrolysis is a highly efficient method for hydrogen production. Research cells typically consist of one proton exchange membrane, two catalyst layers, two porous transport layers, two flow-field plates, and two endplates. In commercial systems, the machined flow-field plates that are employed in research cells are typically replaced by stamped parts or open mesh material solutions to reduce manufacturing cost at scale. Nonetheless, the cell contains about 8 total interfaces: bipolar plate / flow plate material / porous transport medium / electrode / membrane / electrode / porous transport medium / flow plate material / bipolar plate. All these materials and interfaces need to be optimized for maximum performance and efficiency. Reducing the amount of interfaces by combining individual cell components directly benefits the fabrication cost (by reducing the parts count and the needs for surface coatings) and the electrochemical performance (by reducing ohmic losses). We have designed a novel PEM electrolysis cell with a piece of channeled titanium felt functioning as both the anode flow-field and the PTL, referred to as the channeled diffusion layer (CDL). The pores of the felt facilitate both in-plane and through-plane diffusion, ensuring maximum catalyst utilization while also minimizing mass transport loss. The titanium felt can be mass manufactured with existing stamping and forming methods and is therefore a promising candidate to reduce the capital cost of PEM electrolyzers whilst improving hydrogen production efficiency. Experiments conducted with 3mg IrOx/cm2 loading MEAs have shown a approximately 40% boost in peak current by implementing the CDL design. Low catalyst-loading MEAs are being tested in ongoing experiments and their results will be discussed and compared.

08 HYDROGEN↗
DOE OSTI2023

Pathways Toward Efficient and Durable Anion Exchange Membrane Water Electrolyzers Enabled By Electro‐Active Porous Transport Layers

Abstract Green hydrogen, produced via water electrolysis using renewable electricity, will play a crucial role in decarbonizing industrial and heavy‐duty transportation sectors. Anion exchange membrane water electrolyzers (AEMWEs) can overcome many of the performance and cost limitations of incumbent technologies, however, still suffer from durability challenges due to oxidative instability of anion‐exchange ionomers. Herein, the use of an electro‐active porous transport layer as anode (PTL‐electrode) is demonstrated to enable efficient and durable AEMWEs. The stainless‐steel PTL‐electrodes are shown to have superior performance and durability compared to traditional catalyst layers containing ionomer and nanoparticle catalysts. An AEMWE cell operating at 2 A cm −2 for over 600 h exhibited a degradation rate of just 5 µV h −1 . During operation, the surface composition of the stainless steel transforms into a mixture of iron and nickel oxyhydroxides, contributing to enhanced oxygen‐evolution reaction activity. The combination of experimental work and modeling elucidates how the bulk structure of the PTL‐electrode offers an additional design dimension to further improve electrolyzer performance. Lastly, a surface modification strategy is applied to a PTL‐electrode to achieve an even higher performing AEMWE (2.3 vs 2.0 A cm −2 at 1.8 V). Overall, this work lays out pathways toward more efficient, durable, and affordable AEMWEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

From Pyrolysis Oil to Advanced Biographite Anode: Unravelling Biocoke Structural Evolution and Delayed Coking Effects

Catalytic graphitization of biomass-derived carbon offers a promising route to produce biographite as a sustainable alternative to petroleum-based synthetic graphite for lithium-ion battery (LIB) anodes. This study investigates the physicochemical properties of biocokes produced from pyrolysis oil at carbonization temperatures ranging from 150 degrees C to 500 degrees C. Using an iron (Fe) catalyst, graphitization was performed at 1500 degrees C, significantly lower than the ~3000 degrees C required for conventional synthetic graphite. The effects of introducing an intermediate-temperature hold (400 degrees C-600 degrees C) prior to graphitization were evaluated, simulating a "delayed coking" process to enable the coproduction of sustainable aviation fuels (SAFs). Chemical structure evolution during biocoke formation was analyzed, and proposed mechanisms are presented. Biographites produced via the delayed coking pathway exhibited high crystallinity and excellent electrochemical performance in both half-cell and full-cell LIB configurations. The full cells exhibited an initial discharge capacity close to the theoretical capacity of the NMC622 cathode (175 mAh/g at 4.2 V), and high capacity retention (~88%) after 150 cycles. Notably, the graphitic and electrochemical properties remained stable across the range of intermediate hold temperatures. These findings provide a foundation for optimizing temperature parameters in delayed coking systems to enable scalable, integrated production of biographite and SAFs from pyrolysis oil.

09 BIOMASS FUELS↗
NASA NTRS2014

Lithium-Air Cell Development

Lithium-air (Li-air) primary batteries have a theoretical specific capacity of 11,400 Wh/kg, the highest of any common metal-air system. NASA is developing Li-air technology for a Mobile Oxygen Concentrator for Spacecraft Emergencies, an application which requires an extremely lightweight primary battery that can discharge over 24 hours continuously. Several vendors were funded through the NASA SBIR program to develop Li-air technology to fulfill the requirements of this application. New catalysts and carbon cathode structures were developed to enhance the oxygen reduction reaction and increase surface area to improve cell performance. Techniques to stabilize the lithium metal anode surface were explored. Experimental results for prototype laboratory cells are given. Projections are made for the performance of hypothetical cells constructed from the materials that were developed.

Lithium-air↗