Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A Highly Soluble Iron–Based Posolyte Species with High Redox Potential for Aqueous Redox Flow Batteries

A novel iron-based posolyte redox species are presented for an aqueous redox flow battery, (Tetrakis(2-pyridylmethyl)ethylenediamine)iron(II) dichloride, which is obtained by a simple synthetic route, shows a high redox potential of 0.788 V versus SHE, and exhibits exceptional aqueous solubility of 1.46 M. Paired with bis(3-trimethylammonio)propyl viologen tetrachloride at neutral pH, the battery demonstrates an open-circuit voltage of 1.19 V and delivers good cycling performance, with a capacity fade rate of 0.28% per day and coulombic efficiency of 99.3%. Postmortem chemical and electrochemical analyses of the posolyte species suggest future routes for stabilization of the complex. Among all the iron complexes with a redox potential above 0.4 V versus SHE, this compound exhibits the highest solubility. Furthermore, these results offer valuable insights that can be applied to the development of future posolyte species for sustainable energy storage solutions.

25 ENERGY STORAGE↗
DOE OSTI2022

High-Energy and Stable Subfreezing Aqueous Zn–MnO 2 Batteries with Selective and Pseudocapacitive Zn-Ion Insertion in MnO 2

One major challenge of aqueous Zn–MnO 2 batteries for practical applications is their unacceptable performance below freezing temperatures. Here, in this study, the use of simple Zn(ClO 4 ) 2 aqueous electrolytes is described for all-weather Zn–MnO 2 batteries even down to -60 °C. The symmetric, bulky ClO 4 - anion effectively disrupts hydrogen bonds between water molecules and provides intrinsic ion diffusion even while frozen, and enables ≈260 mAh g -1 on MnO 2 cathodes at -30 °C . It is identified that subfreezing cycling shifts the reaction mechanism on the MnO 2 cathode from unstable H+ insertion to predominantly pseudocapacitive Zn 2+ insertion, which converts MnO 2 nanofibers into complicated zincated MnO x that are largely disordered and appeared as crumpled paper sheets. The Zn 2+ insertion at -30 °C is faster and much more stable than at 20 °C, and delivers ≈80% capacity retention for 1000 cycles without Mn 2+ additives. In addition, simple Zn(ClO 4 ) 2 electrolyte also enables a nearly fully reversible and dendrite-free Zn anode at -30 °C with ≈98% Coulombic efficiency. Zn–MnO 2 prototypes with an experimentally verified unit energy density of 148 Wh kg -1 at a negative-to-positive ratio of 1.5 and an electrolyte-to-capacity ratio of 2.0 are further demonstrated.

25 ENERGY STORAGE↗
DOE OSTI2023

Ultrahigh-Loading Manganese-Based Electrodes for Aqueous Batteries via Polymorph Tuning

Manganese-based aqueous batteries utilizing Mn 2+ /MnO 2 redox reactions are promising choices for grid-scale energy storage due to their high theoretical specific capacity, high power capability, low-cost, and intrinsic safety with water-based electrolytes. However, the application of such systems is hindered by the insulating nature of deposited MnO 2 , resulting in low normalized areal loading (0.005–0.05 mAh cm -2 ) during the charge/discharge cycle. Here, in this work, the electrochemical performance of various MnO 2 polymorphs in Mn 2+ /MnO 2 redox reactions is investigated, and ε-MnO 2 with low conductivity is determined to be the primary electrochemically deposited phase in normal acidic aqueous electrolyte. It is found that increasing the temperature can change the deposited phase from ε-MnO 2 with low conductivity to γ-MnO 2 with two order of magnitude increase in conductivity. It is demonstrated that the highly conductive γ-MnO 2 can be effectively exploited for ultrahigh areal loading electrode, and a normalized areal loading of 33 mAh cm -2 is achieved. At a mild temperature of 50 °C, cells are cycled with an ultrahigh areal loading of 20 mAh cm -2 (1–2 orders of magnitude higher than previous studies) for over 200 cycles with only 13% capacity loss.

25 ENERGY STORAGE↗
DOE OSTI2022

Unveiling Charge Transport and Degradation Mechanisms of Aqueous Zn|α-MoO 3 Batteries in Conventional Concentration and Water-in-Salt Electrolytes: A Multi-Modal In Situ and Operando Study

Herein charge storage and transport properties are elucidated and cell degradation mechanisms of rechargeable aqueous Zn|alpha-MoO 3 batteries in three electrolyte systems (3 m ZnSO 4 , 3 m ZnCl 2 , and 30 m ZnCl 2 [12.5 m] water-in-salt (WIS)) are distinguished by a combination of in situ X-ray diffraction (XRD), in situ X-ray absorption spectroscopy (XAS), operando optoelectrochemistry, and operando energy dispersive X-ray diffraction (EDXRD). In conventional concentration 3 m electrolytes, in situ XRD and XAS, as well as ex situ scanning transmission electron microscopy data collectively support Zn 2+ as the primary charge carrier. In addition, these systems are susceptible to cathode dissolution, Zn corrosion coupled with the hydrogen evolution reaction, and the resultant formation of basic zinc salt phases. The multi-modal in situ and operando experimental analyses validate facile H+ intercalation and extraction in concentrated 30 m ZnCl 2 WIS electrolyte. Via operando EDXRD, reaction front and charge transport limitation during discharge and charge in the viscous WIS electrolyte are spatially tracked. Here this work provides new insight into the stability and degradation mechanisms of aqueous zinc batteries during static storage and upon dynamic cycling, and highlights the utility of in situ and operando techniques in understanding the superior stability of WIS electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2020

Opportunities of Aqueous Manganese-Based Batteries with Deposition and Stripping Chemistry

Rechargeable aqueous manganese-based batteries have been attracting significant attention owing to their advantages of low cost, high safety, and ease of manufacturing, which are promising attributes for grid-scale energy storage applications. However, most traditional manganese-based batteries with solid-state conversion and intercalation reactions suffer from low capacity and poor long-term cycling stability. The recent novel storage mechanism based on cathode Mn 2+ /MnO 2 deposition/stripping chemistry has fundamentally tackled these issues, enabling a new generation of manganese-based batteries with superior electrochemical performance. Here, the recent advances in aqueous manganese-based batteries with the Mn 2+ /MnO 2 deposition/stripping chemistry are reviewed. Furthermore, a summary of the development of manganese-based batteries with different storage mechanisms is provided and new opportunities for the emerging Mn 2+ /MnO 2 chemistry in the latest generation are highlighted. Then, the current understanding of the Mn 2+ /MnO 2 charge storage mechanism and its potential in manganese-based batteries for large-scale energy storage applications is presented. Moreover, insights into opportunities and future directions for manganese-based batteries with the Mn 2+ /MnO 2 chemistry are proposed.

25 ENERGY STORAGE↗
DOE OSTI2022

A High Potential, Low Capacity Fade Rate Iron Complex Posolyte for Aqueous Organic Flow Batteries

An iron complex, tris(4,4'-bis(hydroxymethyl)-2,2'-bipyridine) iron dichloride is reported, which operates at near-neutral pH with a redox potential of 0.985 V versus SHE. This high potential compound is employed in the posolyte of an aqueous flow battery, paired with bis(3-trimethylammonio)propyl viologen tetrachloride in the negolyte, exhibiting an open-circuit voltage of 1.3 V at near-neutral pH. It demonstrates excellent cycling performance with a low temporal capacity fade rate of 0.07% per day over 35 days of cycling. The extended cycling lifetime is the result of low permeability and improved structural stability of the newly developed iron complex compared to that of the iron tris(bipyridine) complex. The combination of high redox potential and low capacity fade rate compares favorably with those of all previously demonstrated organic and organometallic aqueous posolytes. Extensive investigation into the possible degradation mechanisms, including post-mortem chemical and electrochemical analyses, indicates that stepwise ligand dissociations of the iron complex are responsible for the reported capacity loss during cell cycling. Further, this investigation provides unprecedented insight to guide further improvements of such metalorganic compounds for energy storage and conversion applications.

25 ENERGY STORAGE↗
DOE OSTI2023

3D-Printed Graded Electrode with Ultrahigh MnO 2 Loading for Non-Aqueous Electrochemical Energy Storage

Electrolytic manganese dioxide is one of the promising cathode candidates for electrochemical energy storage devices due to its high redox capacity and ease of synthesis. Yet, high-loading MnO 2 often suffers from sluggish reaction kinetics, especially in non-aqueous electrolytes. The non-uniform deposition of MnO 2 on a porous current collectors also makes it difficult to fully utilize the active materials at high mass loading. Here, a 3D printed graded graphene aerogel (3D GA) that contains sparsely separated exterior ligaments is developed to create large open channels for mass transport as well as densely arranged interior ligaments providing large ion-accessible active surface. The unique structural design homogenizes the thickness of electro deposited MnO 2 even at an ultrahigh mass loading of ≈70 mg cm -2 . The electrode achieves a remarkable volumetric capacity of 29.1 mA h cm -3 in the non-aqueous electrolyte. A Li-ion hybrid capacitor device assembled with a graded 3D GA/MnO2 cathode and graded 3D GA/VO x anode exhibits a wide voltage window of 0–4 V and a superior volumetric energy density of 20.2 W h L -1 . The findings offer guidance on 3D printed electrode design for supporting ultrahigh loading of active materials and developments of high energy density energy storage devices.

electrochemical energy storage↗
DOE OSTI2025

Understanding the Benefit of Hybrid Electrolytes towards Vanadium Dissolution Suppression and Improved Capacity Retention in Zinc‐Aqueous Batteries Using NaV 3 O 8 Cathodes

Vanadate cathodes used in aqueous Zn-ion batteries with ZnSO 4 are hindered by capacity loss from V dissolution into the electrolyte. However, studies pinpointing the onset of dissolution as a function of electrochemical redox state and quantifying the amount of associated active material are lacking. To prevent dissolution of the NaV 3 O 8 active material, Na + ions are introduced into the electrolyte. Specifically, a hybrid ZnSO 4 + Na 2 SO 4 electrolyte is investigated in concert with NaV 3 O 8 (NVO) cathodes of varied crystallinity to determine the resulting impacts on cathode dissolution and functional electrochemistry. The use of Na + -containing hybrid electrolyte shows no significant change in Zn 2+ diffusion coefficients yet improved capacity retention. Time-resolved quantitative optical emission spectroscopy demonstrates the suppression of V dissolution with the hybrid electrolyte in both pristine and cycled electrodes. Operando synchrotron X-ray diffraction and absorption provide mechanistic insights. Hydrated NVO with wider interplanar spacing exhibits much higher H + /Zn 2+ capacity, while the Na 2 SO 4 mitigates the formation of irreversible side products. Furthermore, this study demonstrates that the use of hybrid electrolytes and control of crystallite size in the parent material can significantly improve electrochemical behavior of layered V-based cathodes in Zn-ion batteries, providing a general strategy toward safe and resilient aqueous battery systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Aqueous Phase Aldol Condensation of Formaldehyde and Acetone on Anatase TiO2(101) Surface: A Theoretical Investigation

A mechanistic understanding of catalytic reactions at solid-liquid interface is limited both experimentally and theoretically but attracts much interest. Using density functional theory calculations (DFT) and ab initio molecular dynamics (AIMD) simulations, we investigated the effect of liquid water on a-H abstraction, C-C coupling, and dehydration steps of aldol condensation of formaldehyde and acetone on an anatase TiO2(101) surface. The existence of the aqueous phase lowered the Gibbs energy of activation of dehydration step pronouncedly from 187 to 74 kJ/mol through proton transfer mechanism, making the hydrogenation pathway more favorable in the aqueous phase. In contrast, a mixed route prevails in the vapor phase. This work provides insights into the effect of the bulk water through a proton transfer mechanism on the dehydrogenation, C-C coupling, and dehydration

anatase TiO2, formaldehyde and acetone, aldol cond↗
DOE OSTI2024

Influence of Linker Group on Bipolar Redox-Active Molecule Performance in Non-Aqueous Redox Flow Batteries

Redox flow batteries (RFBs) are an attractive choice for stationary energy storage of renewables such as solar and wind. Non-aqueous redox flow batteries (NARFBs) have garnered broad interest due to their high voltage operation compared to their aqueous counterparts. Further, the utilization of bipolar redox-active molecules (BRMs) is a practical way to alleviate crossover faced by asymmetric RFBs. In this work, ferrocene (Fc) and phthalimide (PI) are covalently linked with various tethering groups which vary in structure and length. The compiled results suggest that the length and steric shielding ability of the linker group can greatly influence the stability and overall performance of Fc-n-PI BRM-based NARFBs. Primary sources of capacity loss are found to be BRM degradation for straight chain spacers <6 carbons and membrane (Nafion) fouling. Fc-hexyl-PI provided the most stable battery cycling and coulombic efficiencies of >98 % over 100 cycles (~13 days). NARFB using Fc-hexyl-PI as an active material exhibited high working voltage (1.93 V) and maximum capacity (1.28 Ah L -1 ). Additionally, this work highlights rational strategies to improve cycling stability and optimize NARFB performance.

25 ENERGY STORAGE↗
DOE OSTI2023

Kinetics of the Temperature-Dependent e aq - and ·OH Radical Reactions with Cr(III) Ions in Aqueous Solutions

The reactivity of chromium(III) species with the major oxidizing and reducing radiolysis products of water was investigated in aqueous solutions at temperatures up to 150 °C. The reaction between the hydrated electron (e aq - ) and Cr(III) species showed a positive temperature dependence over this temperature range. The reaction was also studied in pH 2.5 and 3.5 solutions for the first time. This work also studied the reaction between acidic Cr(III) species and the hydroxyl radical (·OH). It was found that Cr 3+ did not react significantly with the ·OH radical, but the first hydrolysis species, Cr(OH) 2+ , did with a rate coefficient of k= (7.2±0.3)×10 8 M -1 s -1 at 25 °C. The oxidation of Cr(OH) 2+ by the ·OH radical formed an absorbing product species that ultimately oxidized to give Cr(VI). In conclusion, these newly measured reaction rates allow for the development of improved models of aqueous chromium speciation for the effective remediation of liquid high-level nuclear waste via vitrification processes.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Solvation Structure and Dynamics of Mg(TFSI) 2 Aqueous Electrolyte

Using ab initio molecular dynamics (AIMD) simulations, classical molecular dynamics (CMD) simulations, small-angle X-ray scattering (SAXS), and pulsed-field gradient nuclear magnetic resonance (PFG-NMR), the solvation structure and ion dynamics of magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 ) aqueous electrolyte at 1, 2, and 3 m concentrations are investigated. From AIMD and CMD simulations, the first solvation shell of an Mg 2+ ion is found to be composed of six water molecules in an octahedral configuration and the solvation shell is rather rigid. The TFSI - ions prefer to stay in the second solvation shell and beyond. Meanwhile, the comparable diffusion coefficients of positive and negative ions in Mg(TFSI) 2 aqueous electrolytes have been observed, which is mainly due to the formation of the stable [Mg(H 2 O) 6 ] 2+ complex, and, as a result, the increased effective Mg ion size. Finally, the calculated correlated transference numbers are lower than the uncorrelated ones even at the low concentration of 2 and 3 m, suggesting the enhanced correlations between ions in the multivalent electrolytes. This work provides a molecular-level understanding of how the solvation structure and multivalency of the ion affect the dynamics and transport properties of the multivalent electrolyte, providing insight for rational designs of electrolytes for improved ion transport properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Understanding the Role of Zinc Hydroxide Sulfate and its Analogues in Mildly Acidic Aqueous Zinc Batteries: A Review

Abstract Mildly acidic aqueous zinc batteries (AZBs) have attracted tremendous attention for grid storage applications with the expectation to tackle the issues of Li‐ion batteries on high cost and poor safety. However, the performance, particularly energy density and cycle stability of AZBs are still unsatisfactory when compared with LIBs. To help the development of AZBs, a lot of effort have been made to understand the battery reaction mechanisms and precedent microscopic and spectroscopic analyses have shown flake‐like large particles of zinc hydroxide sulfate (ZHS) and its analogues formed on the surfaces of cathodes and anodes in sulfate and other electrolyte systems during cycling. However, because of the complexity of the thermodynamics and kinetics of aqueous reactions to understand different battery conditions, controversies still exist. This article will review the roles of ZHS discussed in recent representative references aiming to shine light on the fundamental mechanisms of AZBs and pave ways to further improve the battery performance.

25 ENERGY STORAGE↗
DOE OSTI2021

Uptake of aqueous heavy metal ions (Co2+, Cu2+ and Zn2+) by calcium-aluminium-silicate-hydrate gels

Highlights: • C-A-S-H gels containing metal ions (Co{sup 2+}, Cu{sup 2+} or Zn{sup 2+}) were precipitated by a sol-gel technique. • Uptake mechanism and immobilization capacity of divalent metal ions by C-A-S-H are elucidated. • Up to ~55–60 mol% of Zn can be incorporated in defective tobermorite-type C-A-S-H. • Metal uptake by C-A-S-H is controlled mainly by isomorphous substitution for Ca ions. • Crystal-chemical features of C-A-S-H gels and implications for practical application are discussed. Calcium-aluminium-silicate-hydrate (C-A-S-H) gels containing heavy metal ions (Me: Co{sup 2+}, Cu{sup 2+} or Zn{sup 2+}) were precipitated at different Me/Si molar ratios to study the uptake mechanism and immobilization capacity. Aqueous solution chemistry and solid-phase characterization using XRD, FTIR, ESEM-EDX, TEM-HAADF and TG-DSC methods reveal threshold values for ion substitution of ~55–60 mol% for Zn, ~30–40 mol% for Co and ~25–30 mol% for Cu in defective tobermorite-type C-A-S-H with (Ca + Me)/(Si + Al) molar ratios from 0.86 to 1.04. At higher aqueous Me concentrations, Me (chloride) hydroxides start to co-precipitate. The uptake mechanism of Me ions by C-A-S-H is based on (i) isomorphous substitution of Me for Ca in the CaO layer, (ii) ion exchange in the interlayer, (iii) tetrahedral substitution (Zn) within the dreierketten chains and (iv) surface adsorption onto the C-A-S-H gel structure. Systematics in crystal-chemistry of Me-bearing C-A-S-H and implications for application and performance in natural and man-made settings are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Aqueous solution-based synthesis approach for carbon-disordered rocksalt composite cathode development and its limitations

Disordered rocksalt cathodes exhibit high specific capacities and high energy density; however, their low electronic conductivity poses a great challenge. Herein, we explored an aqueous-solution-based synthesis route that involves controlling the surface charges of Li 1.2 Mn 0.6 Ti 0.2 O 1.8 F 0.2 (LMTOF) to be anchored by a few-layer reduced graphene oxide (rGO) for the first time. The uniform rGO wrapping on the surface of the LMTOF particles is achieved by electrostatic attraction between the negatively charged rGO and positively charged LMTOF particles. Although the initial specific capacity of rGO-LMTOF composite increased by 58 % compared to the pristine LMTOF, the composite experienced a severe capacity fade over cycling. The synthesis process in an aqueous medium resulted in Li + /H + exchange and TM dissolution as evidenced from inductively coupled plasmon analysis and X-ray diffraction analysis. Therefore, this work suggests the search for alternative media or conditions for the synthesis of carbon-disordered rock salt cathode composite.

25 ENERGY STORAGE↗
DOE OSTI2021

Iron-iminopyridine complexes as charge carriers for non-aqueous redox flow battery applications

Non-aqueous redox flow batteries (RFBs) have been gaining increased attention in the energy storage arena. Some of their attractive features include the promise for high energy densities, wider voltage windows compared to aqueous systems, as well as wider operating temperature ranges. One of the major challenges in the development of these systems is the lack of electroactive materials that can undergo reversible redox events within the larger potential window of organic solvents. In this paper, we present the design, synthesis, and measurement of electrochemical properties of some iron-based imine- and iminopyridine complexes as promising candidates for RFB applications. Synthesized complexes afforded three reversible redox couples over a ~3 V range. The redox events were also computationally explored and are in good agreement with experimental data. Theoretical calculations show that the redox event at the positive potential can be characterized as metal-centered event corresponding to Fe 3+ → Fe 2+ reduction, while the two redox events at negative potentials are associated with the consecutive reductions of iminopyridine or diimine moieties. This work has led to the identification of a promising anolyte material, [tris(imino)pyridine)Fe][OTf] 2 (1), which is soluble in acetonitrile and is synthesized in two simple steps. This species shows outstanding performance when cycled between 1.0 V and 2.35 V, with 93% coulombic efficiency, 84% energy efficiency, and a capacity decay rate of 0.61% per cycle at 5 mA cm –2 . Further modifications to this kind of charge carrier may lead to the development of high energy density materials for grid scale energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2020

Aqueous Ni-rich-cathode dispersions processed with phosphoric acid for lithium-ion batteries with ultra-thick electrodes

Lithium-ion battery (LIB) production can benefit both economically and environmentally from aqueous processing. Although these electrodes have the potential to surpass electrodes conventionally processed with N -methyl-2-pyrrolidone (NMP) in terms of performance, significant issues still exist with respect to ultra-thick cathodes ($\gg$4 mAh/cm 2 areal capacities). A major concern for these types of electrodes with high-nickel active material stems from lithium leaching from active material, which drives the pH of the dispersion in excess of 12 and subsequently corrodes the current collector interface. As this corrosion reaction proceeds, hydrogen generation at the interface creates bubbles which cause severe cracking in the dried electrode surface. When areal loadings are increased, this effect becomes more pronounced and is detrimental to both mechanical and electrochemical properties of these electrodes. In this work, a technique for mitigating corrosion at the current collector by adjusting the pH of the dispersion with the addition of phosphoric acid is investigated. Phosphoric acid was added in 0.5 wt% increments between 0.0 and 1.5 wt%, and effects on rheology, adhesion, corrosion, and electrochemical performance were investigated. A technique is reported for producing aqueous processed cathodes with areal loadings of 6–8 mAh/cm 2 with reduced surface cracking and superior high-rate discharge capacity (i.e. high-power performance) for this class of cathode loadings.

25 ENERGY STORAGE↗
DOE OSTI2024

A reversible four-electron Sn metal aqueous battery

Sn is a promising metal anode for aqueous batteries, with up to four-electron redox available per atom (903 mAh g −1 Sn ). However, practically harnessing the four-electron Sn(OH) 6 2− /Sn reversibility remains challenging due to limited mechanistic understanding. Here, in this study, we reveal a kinetically asymmetric redox pathway involving a successive four-electron plating and a stepwise 2 + 2 electron stripping through a Sn(OH) 3 − intermediate. The crossover of Sn(OH) 3 − induces a reversible self-discharge that reduces Coulombic efficiency but does not impact cyclability, demonstrated by four-electron Sn-Ni full cells that sustain >800 h of stable cycling. By tuning the ion selectivity of the separator to suppress Sn(OH) 3 − crossover while allowing OH − transport, we further demonstrate high Sn utilization (67%) and high energy density (143.1 Wh L −1 cell). The results provide key understandings of the tradeoffs in engineering reversible multi-electron metal anodes and define a new benchmark for practical energy density that exceeds any Sn-based aqueous batteries to date.

SN anode↗