SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Carbonates can potentially provide sites for organic materials to accrue and develop into complex macromolecules. This study examines the organics associated with carbonates in carbonaceous chondrites using μ-Raman imaging.
Carbonates can potentially provide sites for organic materials to accrue and develop into complex macromolecules. This study examines the organics associated with carbonates in carbonaceous chondrites using micron-Raman imaging.
This report describes Universities Space Research Association (USRA) activities in support of the Geophysical Parameter Retrieval and Analysis studies. Specifically it addresses personnel assigned to the effort, travel, consultant participants, technical progress, and contract spending.
An analysis is made of 35 proton bursts observed with the Max-Planck-Institut/University of Maryland sensor system on ISEE 3 far upstream of the earth's bow shock. These upstream bursts are found to fall into two distinctive groups. The first is accompanied by energetic electrons (more than about 75 keV), and the proton spectrum extends up to energies greater than about 300 keV and higher and bends over toward lower energies (less than about 30 keV). The second group, which is unaccompanied by energetic electron bursts, exhibits spectra which can be represented extremely well by exponentials in energy with a mean e-folding energy of approximately 15 keV. The first group is thought to be of a magnetospheric origin, and the second to be bow-shock associated.
Evaluation of evidence pertaining to apparent associations between galaxies and quasi-stellar objects. It is shown that for the five 3C QSOs which lie very close to bright galaxies the QSO-galaxy angular separations are inversely proportional to the redshifts of the galaxies. This lends additional support to the association hypothesis. However, an analysis of an essentially disjoint sample of QSOs identified from the Parkes radio catalog, and fainter galaxies in the catalog of Zwicky and his associates, reveals no statistically significant tendency toward pairing of QSOs and galaxies. The results can be explained in one of two ways. One is that, despite the evidence to the contrary, the 3C results are due to chance. The other is that real associations in the second sample are masked by selection effects. It is shown that several selectional biases do indeed discriminate against the detection of QSO-galaxy pairs, especially for fainter objects. Finally, on the assumption that the 3C QSO-galaxy associations are real, the relationship of QSOs to galaxies is discussed.
Various properties of Titan's troposphere are inferred from an analysis of Voyager I infrared spectrometer (IRIS) data between 200 and 600/ cm. Two homogeneous spectral averages acquired at widely separated emission angles are chosen for the analysis. Both data sets are associated with northern low latitudes very close to that of the radio science ingress occultation point. Solutions require simultaneous nonlinear least-squares fits to the two IRIS data sets, coupled with iteration of the radio occultation refractivity data. Values and associated 1-sigma uncertainties of several parameters are inferred from our analysis. These include mole fractions for molecular hydrogen (approx. 0.0011), argon (small), and methane near the surface ( approx. 0.057). Solutions are also obtained for the hydrogen parafraction (close to equilibrium, with considerable uncertainty), air temperature near the surface ( approx. 93 K), surface surface temperature discontinuity (approx. 1 K), and maximum degree of methane supersaturation in the upper troposphere (approx. 1.5). Actual values for the above-mentioned parameters depend on the amount of ethane cloud near the tropopause. There is no evidence for methane clouds in the upper troposphere, nor is their presence compatible with large degrees of supersaturation. A wave number dependence for the stratospheric haze opacity is inferred similar to that found for a polymeric residue created in laboratory discharge experiments. This haze appears to be uniformly distributed with latitude between altitudes of 40 and 160 km, provided those nighttime data at southern high latitudes that are discounted.
This paper describes the interim structural analysis of a redesigned Ice/Frost Ramp bracket for the Space Shuttle External Tank (ET). The proposed redesigned bracket consists of mounts for attachment to the ET wall, supports for the electronic/instrument cables and propellant repressurization lines that run along the ET, an upper plate, a lower plate, and complex bolted connections. The eight nominal bolted connections are considered critical in the summarized structural analysis. Each bolted connection contains a bolt, a nut, four washers, and a non-metallic spacer and block that are designed for thermal insulation. A three-dimensional (3D) finite element model of the bracket is developed using solid 10-node tetrahedral elements. The loading provided by the ET Project is used in the analysis. Because of the complexities associated with accurately modeling the bolted connections in the bracket, the analysis is performed using a global/local analysis procedure. The finite element analysis of the bracket identifies one of the eight bolted connections as having high stress concentrations. A local area of the bracket surrounding this bolted connection is extracted from the global model and used as a local model. Within the local model, the various components of the bolted connection are refined, and contact is introduced along the appropriate interfaces determined by the analysts. The deformations from the global model are applied as boundary conditions to the local model. The results from the global/local analysis show that while the stresses in the bolts are well within yield, the spacers fail due to compression. The primary objective of the interim structural analysis is to show concept viability for static thermal testing. The proposed design concept would undergo continued design optimization to address the identified analytical assumptions and concept shortcomings, assuming successful thermal testing.
Combinations of high temperature gradients associated with strong transients in both temperature and rotational speed fields are discussed. Blade definition and results of the analysis are shown. Since the same model should later be used to define some dynamic characteristics and certain areas would require a nonlinear analysis, NASTRAN was chosen as a convenient program to manage the several alternatives.
An assessment of risk, in terms of delivery delays, cost overrun, and performance achievement, associated with the V/STOL technology airplane is presented. The risk is discussed in terms of weight, structure, aerodynamics, propulsion, mechanical drive, and flight controls. The analysis ensures that risks associated with the design and development of the airplane will be eliminated in the course of the program and a useful technology airplane that meets the predicted cost, schedule, and performance can be produced.
An incremental iterative formulation together with the well-known spatially split approximate-factorization algorithm, is presented for solving the large, sparse systems of linear equations that are associated with aerodynamic sensitivity analysis. This formulation is also known as the 'delta' or 'correction' form. For the smaller two dimensional problems, a direct method can be applied to solve these linear equations in either the standard or the incremental form, in which case the two are equivalent. However, iterative methods are needed for larger two-dimensional and three dimensional applications because direct methods require more computer memory than is currently available. Iterative methods for solving these equations in the standard form are generally unsatisfactory due to an ill-conditioned coefficient matrix; this problem is overcome when these equations are cast in the incremental form. The methodology is successfully implemented and tested using an upwind cell-centered finite-volume formulation applied in two dimensions to the thin-layer Navier-Stokes equations for external flow over an airfoil. In three dimensions this methodology is demonstrated with a marching-solution algorithm for the Euler equations to calculate supersonic flow over the High-Speed Civil Transport configuration (HSCT 24E). The sensitivity derivatives obtained with the incremental iterative method from a marching Euler code are used in a design-improvement study of the HSCT configuration that involves thickness. camber, and planform design variables.
A well-defined chicken osteoblast culture system(18) has been used to examine fibronectin (FN) mRNA levels, synthesis, and accumulation during in vitro differentiation and matrix mineralization. Immunofluorescent staining of cells after 6 or 18 days in culture revealed that FN was initially associated with the cell surface and in partial coalignment with cytoskeletal elements while at the latter time most FN was associated with the extracellular matrix as a ubiquitous fibrillar network. Western blot analysis of total cell-associated proteins also detected FN at all culture times. However, when results were normalized to cellular DNA, FN levels increased until 12-16 and remained relatively constant thereafter. Similarly, FN synthesis as measured by [35S]-methionine labeling, and immunoprecipitation was greatest in early cultures (culture day 3) and then declined such that synthesis decreased 60% at day 18 and 94% after 24-31 days. FN mRNA levels as measured by Northern blot analysis were well correlated with FN synthesis. These results clearly show that FN is made by primary osteoblasts during their in vitro maturation. In contrast to other osteoblast markers such as alkaline phosphatase, osteocalcin, and osteopontin, whose expression increases as cells differentiate, FN accumulates in the matrix during periods of early cell growth and attachment and then remains proportional to cell number. Results with FN differ from those obtained with collagen which continues to accumulate in the extracellular matrix during osteoblast maturation. These results are consistent with FN being important for the initial attachment of early osteoblasts or osteoblast precursors to the pericellular matrix.
An analysis is conducted for 149 flare-associated shock wave events based on interplanetary scintillation observational data. All of the flare-associated shock waves tend to propagate toward the low latitude region near the solar equator for flares that are located in both the solar Northern and Southern Hemispheres. Also, the fastest propagation directions tend toward the heliospheric current sheet near 1 AU. This tendency is caused by the dynamic action of near-sun magnetic forces on the ejected coronal plasma that traverses the helmet-like magnetic topologies near the sun outward to the classical topology that is essentially parallel to the heliospheric current sheet.
This grant supported the analysis of a ROSAT observation of a field in the Orion OB1A star forming region. The data were obtained without problem, and a number of sources were detected. The data have been analyzed. We have obtained the optical and near-IR photometry, and some of the optical spectroscopy (the latter in November 1999) we need to fully analyzed and understand the data.
Method and system for analyzing aircraft data, including multiple selected flight parameters for a selected phase of a selected flight, and for determining when the selected phase of the selected flight is atypical, when compared with corresponding data for the same phase for other similar flights. A flight signature is computed using continuous- valued and discrete-valued flight parameters for the selected flight parameters and is optionally compared with a statistical distribution of other observed flight signatures, yielding a typicality scores for the same phase for other similar flights. A cluster analysis is optionally applied to the flight signatures to define an optimal collection of clusters. A level of atypicality for a selected flight is estimated, based upon an index associated with the cluster analysis.
Method and system for analyzing aircraft data, including multiple selected flight parameters for a selected phase of a selected flight, and for determining when the selected phase of the selected flight is atypical, when compared with corresponding data for the same phase for other similar flights. A flight signature is computed using continuous-valued and discrete-valued flight parameters for the selected flight parameters and is optionally compared with a statistical distribution of other observed flight signatures, yielding atypicality scores for the same phase for other similar flights. A cluster analysis is optionally applied to the flight signatures to define an optimal collection of clusters. A level of atypicality for a selected flight is estimated, based upon an index associated with the cluster analysis.
As part of an overall focus on space exploration, National Aeronautics and Space Administration (NASA) continues to evaluate potential approaches for sending humans beyond low Earth orbit (LEO). In addition, various external organizations are studying options for beyond LEO exploration. Recent studies include NASA's Evolvable Mars Campaign and Design Reference Architecture (DRA) 5.0, JPL's Minimal Mars Architecture; the Inspiration Mars mission; the Mars One campaign; and the Global Exploration Roadmap (GER). Each of these potential exploration constructs applies unique methods, architectures, and philosophies for human exploration. It is beneficial to compare potential approaches in order to better understand the range of options available for exploration. Since most of these studies were conducted independently, the approaches, ground rules, and assumptions used to conduct the analysis differ. In addition, the outputs and metrics presented for each construct differ substantially. This paper will describe the results of an effort to compare and contrast the results of these different studies under a common set of metrics. The paper will first present a summary of each of the proposed constructs, including a description of the overall approach and philosophy for exploration. Utilizing a common set of metrics for comparison, the paper will present the results of an evaluation of the potential benefits, critical challenges, and uncertainties associated with each construct. The analysis framework will include a detailed evaluation of key characteristics of each construct. These will include but are not limited to: a description of the technology and capability developments required to enable the construct and the uncertainties associated with these developments; an analysis of significant operational and programmatic risks associated with that construct; and an evaluation of the extent to which exploration is enabled by the construct, including the destinations visited and the exploration capabilities provided at those destinations. Based upon the comparison of constructs, the paper will identify trends and lessons learned across all of the candidate studies.
The lunar regolith will most likely be a primary raw material for lunar base construction and resource extraction. High-resolution radar observations of the Moon provide maps of radar backscatter that have intensity variations generally controlled by the local slope, material, and structural properties of the regolith. The properties that can be measured by the radar system include the dielectric constant, density, loss tangent, and wavelength scale roughness. The radar systems currently in operation at several astronomical observatories provide the ability to image the lunar surface at spatial resolutions approaching 30 m at 3.8 cm and 12.6 cm wavelengths and approximately 500 m at 70 cm wavelength. The radar signal penetrates the lunar regolith to a depth of 10-20 wavelengths so the measured backscatter contains contributions from the vacuum-regolith interface and from wavelength-scale heterogeneities in the electrical properties of the subsurface material. The three wavelengths, which are sensitive to different scale structures and scattering volumes, provide complementary information on the regolith properties. Aims of the previous and future observations include (1) analysis of the scattering properties associated with fresh impact craters, impact crater rays, and mantled deposits; (2) analysis of high-incidence-angle observations of the lunar mare to investigate measurement of the regolith dielectric constant and hence porosity; (3) investigation of interferometric techniques using two time-delayed observations of the same site, observations that require a difference in viewing geometry less than 0.05 deg and, hence, fortuitous alignment of the Earth-Moon system when visible from Arecibo Observatory.
The Data Systems Operations Team (DSOT) currently monitors the Multimission Ground Data System (MGDS) at JPL. The MGDS currently supports five spacecraft and within the next five years, it will support ten spacecraft simultaneously. The ground processing element of the MGDS consists of a distributed UNIX-based system of over 40 nodes and 100 processes. The MGDS system provides operators with little or no information about the system's end-to-end processing status or end-to-end configuration. The lack of system visibility has become a critical issue in the daily operation of the MGDS. A task analysis was conducted to determine what kinds of tools were needed to provide DSOT with useful status information and to prioritize the tool development. The analysis provided the formality and structure needed to get the right information exchange between development and operations. How even a small task analysis can improve developer-operator communications is described, and the challenges associated with conducting a task analysis in a real-time mission operations environment are examined.