Search NASA⌕ Search

SEARCH · Search NASA

Results for “asymmetric unit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Linear-Scaling Asymmetric Triples Correction through the Solution of the DLPNO–CCSD Lambda Equations: DLPNO–CCSD(T) Λ

In this research, we derive equations for solving for the stationary points of the DLPNO–CCSD Lagrangian, in the t 1 -transformed formalism introduced earlier and as currently implemented in the P SI 4 quantum chemistry software package. These lambda equations in the local pair natural orbital basis allow for the evaluation of CCSD(T) Λ energetics with linear-scaling computational effort, also known as the asymmetric triples correction. This DLPNO–CCSD(T) Λ method allows for accurate triples contributions to be computed for larger molecules, especially in cases that CCSD(T) is known to be insufficient, such as with multireference systems and bond-breaking systems. We showcase the accuracy of our code on reaction energies, barrier heights, and noncovalent interaction energies. Also showcased are the capabilities of our code by evaluating DLPNO–CCSD(T) Λ energetics on large noncovalent dimers up to 112 atoms, as well as a rhodium catalyst complex containing 66 atoms.

Cluster chemistry↗
NASA NTRS1994

Orbital processing of high-quality CdTe compound semiconductors

CdZnTe crystals were grown in one-g and in micro-g for comparative analysis. The two micro-g crystals were grown in the Crystal Growth Furnace during the First United States Microgravity Laboratory mission (USML-1). The samples were analyzed for chemical homogeneity, structural perfection, and optoelectronic performance (infrared transmission). Fourier Transform Infrared (FTIR) transmission of both ground and flight materials showed that the infrared transmission was close to theoretical, 63% versus 66%, suggesting that the material was close to the stochiometric composition during both the ground and flight experiments. Infrared microscopy confirmed that the principal precipitates were Te and their size (1-10 microns) and density suggested that the primary flight and ground base samples experienced similar cooling rates. Macrosegregation was predicted, using scaling analysis, to be low even in one-g crystals and this was confirmed experimentally, with nearly diffusion controlled growth achieved even in the partial mixing regime on the ground. Radial segregation was monitored in the flight samples and was found to vary with fraction solidified, but was disturbed due to the asymmetric grvitational and thermal fields experienced by the flight samples. The flight samples, however, were found to be much higher in structural perfection than the ground samples produced in the same furnace under identical growth conditions except for the gravitational level. Rocking curve widths were found to be substantially reduced, from 20/35 (one-g) to 9/20 (micro-g) for the best regions of the crystals. The full width at half maximum (FWHM) of 9 arc seconds is as good as the best reported terrestrially for this material. The ground samples were found to have a fully developed mosaic structure consisting of subgrains, whereas the flight sample dislocations were discrete and no mosaic substructure was evident. The defect density was reduced from 50-100,000 (one-g) to 500-25000 EPD (micro-g). These results were confirmed using rocking curve analysis, synchrotron topography, and etch pit analysis. The low dislocation density is thought to have resulted from the near-absence of hydrostatic pressure which allowed the melt to solidify with minimum or no wall contact, resulting in very low stress being exerted on the crystal during growth or during post-solidification cooling.

Larson, David J., Jr.↗
DOE OSTI2025

Asymmetrical cavity design that bypasses mode mixings in axion haloscope experiments

Microwave cavities used in axion haloscope experiments typically employ a tuning rod as a means to widen the range of resonance frequencies at which it is sensitive to axion-to-photon conversion. A realistic tuning mechanism requires a gap between the cavity end caps and the tuning rod to ensure movement, and causes some modes to hybridize with the resonant mode that is being tracked for the experiment. These so-called mode mixings lead to gaps in the frequency range that practically lose sensitivity to axions. Here, to solve this problem, we present a cavity design which, for two tuning rod configurations corresponding to a lower and higher frequency range, have a dielectric rod inserted at a specific location that makes the cavity asymmetrical. Moving the tuning rod closer to the dielectric insert changes the location and frequency of the mode mixing compared to when it is farther away from it. This design is easily realizable in practical experiments and makes possible an axion dark matter search with minimal loss in sensitivity due to mode mixings. We also show that the same design has the same desired effect when cavity dimensions are scaled down to be smaller and are at higher resonance frequencies.

Axion↗
DOE OSTI2025

Shell effects in quasi-fission: Reactions forming actinide and superheavy compound nuclei

Quasi-fission occurs in fully damped heavy-ion collisions following a significant mass transfer between the fragments, without formation of a compound nucleus. As in fission, quasi-fission is expected to be affected by quantum effects leading to asymmetric mass splits. Quantum shells stabilising fission fragments with octupole shapes have been invoked as a factor determining the distribution of nucleons between the fragments at scission, explaining the fact that the centroid of the heavy fragment charge distribution is found around Z = 54 protons in fission and quasi-fission of actinides. These shell effects are studied in microscopic studies of quasi-fission. In particular, time-dependent Hartree-Fock (TDHF) calculations have been performed for reactions forming actinides.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Predicted third-order sweet spots for phi-junction Josephson parametric amplifiers

Hybrid superconductor-semiconductor nanowire Josephson junctions exhibit skewed and phi-shifted current phase relations when an in-plane magnetic field is applied along the weak link's spin-orbit effective field direction. These junctions can have an asymmetric Josephson potential with odd-order nonlinearities. A dominant third-order nonlinearity can be achieved by tuning the magnetic field to a sweet spot. Sweet spots persist when higher order Josephson harmonics are included. This makes it possible to have a single Josephson junction dipole element with three-wave mixing capability, which is favorable for pump-efficient amplification. Electrostatic gate tunability of the semiconductor weak link can make it operable within an extended range of working frequencies, and the inclusion of micromagnets can facilitate near-zero magnetic field operation.

Reza, Tasnum [Univ. of Pittsburgh, PA (United Stat↗
DOE OSTI2025

Geometric Delocalization in Two Dimensions

We demonstrate the existence of transient two-dimensional surfaces where a random-walking particle escapes to infinity in contrast to localization in standard flat two-dimensional space. We first prove that any rotationally symmetric two-dimensional membrane embedded in flat three-dimensional space cannot be transient. Then we formulate a criterion for the transience of a general asymmetric two-dimensional membrane. We use it to explicitly construct a class of transient two-dimensional manifolds with a nontrivial metric and height function but “zero average curvature,” which we dub “tablecloth manifolds.” The absence of the logarithmic infrared divergence of the Laplace-Beltrami operator in turn implies the absence of weak localization, nonexistence of bound states in shallow potentials, and breakdown of the Mermin-Wagner theorem and Kosterlitz-Thouless transition on the tablecloth manifolds, which may be realizable in both quantum simulators and corrugated two-dimensional materials.

Anderson localization↗
DOE OSTI2026

Reductions in wind farm main bearing rating lives resulting from wake impingement

This paper studies the impacts of wake impingement on main bearing rating lives predicted during the wind turbine design stage. A computational tool chain was developed to explore and quantify these effects across a wind farm populated by 10 MW wind turbines. Wind field and turbine load modelling was undertaken using the Dynamiks Python package, including application of a dynamic wake meandering model. The ISO 281 basic bearing rating life formulation was subsequently applied in order to evaluate impacts from wake effects. Analyses included a two-turbine parametric analysis, followed by a full wind farm analysis undertaken for the TotalControl 32-turbine reference wind farm, including full wind rose simulations across all operational wind speeds. Site conditions were accounted for using a Weibull wind speed distribution and a range of parametric wind direction rose models. Results indicate that wind farm main bearing rating lives are negatively impacted by the effects of wake impingement, resulting in rating life reductions for the analysed wind farm of the order of 16 % on average and as much as 20 %–25 %, both for the locating main bearing. Despite these high sensitivities, it is important to note that these resultant rating lives (i.e. the predicted lives) still far exceed the standard wind turbine operational lifetimes of 20–30 years. Wake impacts were also found to be asymmetrically related to the side on which the rotor is impinged, suggesting that, for the main bearing, there may be a “better” side for wake impingement to occur. Rating life sensitivities to wind rose shape were also observed. While these findings must be interpreted with due consideration for the various methodological limitations present, they provide compelling evidence that wake effects at the wind farm level should necessarily be included when undertaking main bearing operational load modelling, rating life assessment, or other load-related analyses.

17 WIND ENERGY↗
DOE OSTI2026

Symmetry-energy expansion with strange dense matter

The quantum chromodynamics (QCD) phase diagram at large densities and low temperatures can be probed using both neutron stars and low-energy heavy-ion collisions. Heavy-ion collisions are nearly isospin-symmetric systems, whereas neutron stars are highly isospin asymmetric since they are neutron rich. The symmetry-energy expansion is used to connect these regimes across isospin asymmetry. However, the current symmetry-energy expansion does not account for strange particles. In this work, we include finite strangeness by redefining the isospin-asymmetry parameter and the symmetry-energy expansion in a way that is consistent with QCD SU(3) flavor symmetry. Furthermore, our new symmetry energy works well beyond typical neutron star central densities and admits a skewness term in the presence of strangeness for the case of weak equilibrium.

Equations of state of nuclear matter↗
DOE OSTI2025

Controlling rotational air lasing lineshape by carrier-envelope offset phase

The carrier-envelope offset phase (CEP) of a few-cycle optical pulse is commonly used to control electron dynamics on the attosecond timescale, whereas lasing spectra from transitions between rotational states are generally emitted over much longer durations, typically nanoseconds. Here, we demonstrate CEP control of the rotational lasing spectra corresponding to the transition from B 2 Σ$^+_u$ to X 2 Σ$^+_g$ (1) in N$^+_2$ cations, transforming its lineshape from a symmetric Lorentzian profile to an asymmetric Fano type–and vice versa. This lineshape modulation arises from the interference between the B-X coherence initiated by the main pulse and the supercontinuum (self seed) by self-phase modulation, resembling an “f-to-3f" interferometry. Additionally, for lasing lines with lower rotational quantum numbers, we observe a stronger coupling between adjacent lasing peaks, which originates from the amplification of both even- and odd-order rotational coherent emission lines. Our study presents a general framework for controlling lasing lineshapes and provides new insights into sub-optical-cycle dynamics in air lasing.

atomic and molecular interactions with photons↗
DOE OSTI2026

Tailorable multiferroic tunnel junctions from all-van der Waals multilayer stacking

Multiferroic tunnel junctions (MFTJs) represent a class of multistate, non-volatile spintronic devices, in which electron tunnelling can be manipulated by switching long-range lattice and spin orders. In contrast to conventional oxide-based MFTJs, MFTJs constructed from two-dimensional van der Waals (vdW) crystals promise minimal defect concentration in the constituents and at interfaces, which may allow for probing intrinsic tunnelling physics and the development of high-performance devices. Here, in this study, we construct Fe 3 GeTe 2 /CuInP 2 S 6 /Fe 3 GeTe 2 all-vdW MFTJs by assembling multilayer flakes of ferromagnetic Fe 3 GeTe 2 electrodes and a ferroelectric CuInP 2 S 6 spacer. These MFTJs exhibit four non-volatile resistance states featuring sizable tunnelling magnetoresistance of ∼10 2 % and tunnelling electroresistance of ∼10 4 %. To tune the properties of the vdW MFTJ, we make use of the flexibility in material choice offered by vdW heterostructure devices; we use Fe 3 GeTe 2 /Fe 5 GeTe 2 asymmetric electrodes to boost the tunnelling electroresistance by 10 3 %, we integrate In 2 Se 3 as a ferroelectric with a smaller bandgap to enhance the ON-state current density by 10 4 % to 10 4 A cm −2 and we use Fe 3 GaTe 2 electrodes to demonstrate room temperature operation. Furthermore, when we combine the asymmetric ferromagnetic electrodes with the small-bandgap ferroelectric spacer to construct Fe 3 GeTe 2 /In 2 Se 3 /Fe 5 GeTe 2 MFTJs, we simultaneously realized tunnelling electroresistance of 10 6 % and an ON-state current density of 10 4 A cm −2 , both two orders of magnitude higher than the highest values achieved with conventional oxide-based MFTJs. In the future, our all-vdW MFTJs with the tailorability of all functional layers may make it possible to investigate fundamental aspects of interlayer tunnelling and enable the design of functional magnetoelectric nanodevices.

Xie, Ti [University of Maryland, College Park, MD ↗
DOE OSTI2025

Robust and symmetric magnetic field dependency of superconducting diode effect in asymmetric Dirac semimetal SQUIDs

The recent demonstration of the superconducting diode effect (SDE) has generated renewed interest in superconducting electronics, in which devices such as compact superconducting diodes that can perform signal rectification with low-energy operations are needed. In this article, we present our results of robust and symmetric-in-magnetic-field SDE in asymmetric superconducting quantum interference devices (SQUIDs) realized in high-quality Dirac semimetal Cd 3 As 2 thin film grown by the molecular beam epitaxy technique. Consistent with previous work, a zero magnetic field SDE is observed. Furthermore, the difference in switching current is independent of the strength and polarity of an out-plane magnetic field in the range of −10 and 10 mT. We speculate that this robust symmetric-in-field SDE in our Dirac semimetal SQUIDs is due to the formation of helical spin texture, theoretically predicted in Dirac semimetals.

Current-voltage characteristic↗
DOE OSTI2026

Distortion of a Relativistic Jet Echoing a Magnetic Flux Eruption

Magnetized accretion onto spinning black holes (BHs) can accumulate a large magnetic flux across the event horizon and launch a pair of relativistic jets via the Blandford–Znajek mechanism. In the magnetically saturated (arrested) state, excess magnetic flux is ejected from the BH in episodic magnetic flux eruptions, which result in a significant yet temporary reduction of jet power. We analyze results of a high-resolution 3D general-relativistic magnetohydrodynamic numerical simulation of geometrically thick magnetically saturated accretion onto a high-spin Kerr BH for a single cycle of magnetic flux eruption and accumulation. We show that following an eruption, a weakened jet develops a strong helical distortion with a distinct structure of magnetic fields—the poloidal field along the jet core is unaffected by the eruption; while toroidal field lines, ejected from the BH during the eruption and later readvected onto it, form poloidal “bypasses” along the inner jet sheath. Such a distortion may appear in sources fed by geometrically thick accretion flows as an asymmetric superluminal knot, strongly interacting with the jet sheath along an oblique working surface. The jet section repowered by magnetic flux reaccumulated on the BH is tilted by a few degrees, implying significant variations in radiation boost towards observers of BL Lac blazars. The intrinsic structure of the jet spine is consistent with axisymmetric semi-analytical models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Systematic Bayesian evaluation of resonance parameters in 19 Ne for the 15 O ⁡(𝛼, 𝛾)⁢ 19 Ne and 18 F ⁡(𝑝, 𝛼)⁢ 15 O reactions

Here, we present a comprehensive evaluation of the nuclear structure properties of 19 Ne using a novel and rigorous Bayesian statistical framework. Precise characterization of 19 Ne resonance parameters is critical for accurately determining reaction rates of the astrophysically significant 15 O ⁡(𝛼, 𝛾)⁢ 19 Ne and 18 F ⁡(𝑝, 𝛼)⁢ 15 O reactions, which govern breakout from the hot CNO cycle in x-ray bursts and influence 𝛾-ray emission in novae, respectively. By reconstructing likelihood functions from published experimental data—including asymmetric uncertainties and upper or lower limits—we derive posterior distributions for resonance energies, decay widths, and branching ratios. Our Bayesian approach systematically incorporates previously reported discrepancies among measurements, providing a statistically robust and consistent treatment of these uncertainties. The evaluated resonance parameters and associated uncertainties provide crucial input for stellar nucleosynthesis modeling, contributing to a refined understanding of explosive astrophysical phenomena.

Kim, Sohyun H. [Sungkyunkwan Univ., Suwon (Republi↗
DOE OSTI2026

Substitution or Shared Utilization? Intrahousehold Vehicle Use in Mixed-Powertrain Households

While previous research has focused heavily on understanding the factors deriving alternative fuel vehicle adoption rates, there remains a significant gap in understanding how households distribute mileage across different powertrains. This study utilizes data from the 2022 Next Generation National Household Travel Survey to investigate vehicle miles traveled within a sample of 150 plug-in electric vehicle (PEV)-owning households (in which at least one battery electric vehicle is present), characterizing how different powertrains are integrated into daily mobility. Leveraging a Seemingly Unrelated Regression (SUR) framework the study jointly models the utilization of PEVs, hybrid electric vehicles (HEV), and internal combustion engine vehicles (ICEVs) while accounting for household-level substitution effects. The results provide evidence of an asymmetric substitution effect. In households with mixed-powertrain configurations, the ICEV captures a substantially higher share of household miles (compared with the PEV), acting as a utility sponge. Conversely, the model identifies specific socioeconomic and geographic cohorts that prioritize PEV as the primary household workhorse, indicating a systematic sorting effect. Although the sample size limits broader generalizability, these findings suggest that PEVs are used for frequent, specific routine-intensive roles, whereas the ICEV remains a specialized utility vehicle. These insights highlight distinct intrahousehold vehicle use behaviors that are often obscured by aggregate fleetwide statistics.

25 ENERGY STORAGE↗
NASA NTRS1995

Receiver design, performance analysis, and evaluation for space-borne laser altimeters and space-to-space laser ranging systems

Laser altimeters measure the time of flight of the laser pulses to determine the range of the target. The simplest altimeter receiver consists of a photodetector followed by a leading edge detector. A time interval unit (TIU) measures the time from the transmitted laser pulse to the leading edge of the received pulse as it crosses a preset threshold. However, the ranging error of this simple detection scheme depends on the received, pulse amplitude, pulse shape, and the threshold. In practice, the pulse shape and the amplitude are determined by the target target characteristics which has to be assumed unknown prior to the measurement. The ranging error can be improved if one also measures the pulse width and use the average of the leading and trailing edges (half pulse width) as the pulse arrival time. The ranging error becomes independent of the received pulse amplitude and the pulse width as long as the pulse shape is symmetric. The pulse width also gives the slope of the target. The ultimate detection scheme is to digitize the received waveform and calculate the centroid as the pulse arrival time. The centroid detection always gives unbiased measurement even for asymmetric pulses. In this report, we analyze the laser altimeter ranging errors for these three detection schemes using the Mars Orbital Laser Altimeter (MOLA) as an example.

Davidson, Frederic M.↗
DOE OSTI2025

MXene/graphitic carbon nitride-supported metal selenide for all-solid-state flexible supercapacitor and oxygen evolution reaction

We report a new type of combination of rare earth metal selenides (Ce 2 Se 3 and Er 2 Se 3 ) with a Ti 3 C 2 T x /S-doped graphitic carbon nitride heterostructure for bifunctional application in flexible supercapacitors and oxygen evolution reactions. The incorporation of S-doped graphitic carbon nitride in MXenes reduced the layer stacking tendency of both two-dimensional sheets and eliminated volume expansion by forming a heterostructure. Cerium and erbium rare earth metal centers induce reactive surface sites, whereas binary layers of Ti 3 C 2 T x /S-doped graphitic carbon nitride provide a conducting matrix for the homogeneous growth of the metal selenides. The assembled all-solid-state flexible asymmetric supercapacitor exhibited a high specific capacitance of 60 F g –1 , an energy density of 10.1 W h kg –1 (volumetric energy density: 0.9 mW h cm –3 ) at 2 A g –1 , and 100% capacitance retention after 10 000 charge–discharge cycles with good flexibility for real-time applications. Furthermore, the optimum nanohybrid showed a low overpotential of 280 mV and a Tafel slope of 99 mV dec –1 with durable electrocatalytic performance. Furthermore, this work is the first to investigate the bifunctional energy efficiency of rare earth metal selenides grown over MXene materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Non-resonant Raman optical activity from phase-space electronic structure theory

In order to model experimental non-resonant Raman optical activity, chemists must compute a host of second-order response tensors (e.g., the electric-dipole–magnetic-dipole polarizability) and their nuclear derivatives along a set of vibrational modes. While these response functions are almost always computed within a Born–Oppenheimer (BO) framework, here we provide a natural interpretation of the electric-dipole–magnetic-dipole polarizability within phase space electronic structure theory, a beyond-BO model whereby the electronic structure depends on nuclear momentum (P) in addition to nuclear position (R). By coupling to nuclear momentum, phase space electronic structure theory is able to capture the asymmetric response of the electronic properties to an external field, in so far as for a vibrating (non-stationary) molecule, $\frac{∂μ}{∂B}$≠$\frac{∂m}{∂F}$, where μ and m are the electrical linear and magnetic dipoles, and F and B are electric and magnetic fields. As an example, for a prototypical methyloxirane molecule, we show that phase space electronic structure theory is able to deliver a reasonably good match with experimental results in a manner that is formally invariant to gauge origin G 0 —provided that one uses a complete basis or, alternatively, gauge invariant atomic orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Three-dimensional imaging of pion using lattice QCD: generalized parton distributions

In this work, we report a lattice calculation of x-dependent valence pion generalized parton distributions (GPDs) at zero skewness with multiple values of the momentum transfer −t. The calculations are based on an N f = 2 + 1 gauge ensemble of highly improved staggered quarks with Wilson-Clover valence fermion. The lattice spacing is 0.04 fm, and the pion valence mass is tuned to be 300 MeV. We determine the Lorentz-invariant amplitudes of the quasi-GPD matrix elements for both symmetric and asymmetric momenta transfers with similar values and show the equivalence of both frames. Then, focusing on the asymmetric frame, we utilize a hybrid scheme to renormalize the quasi-GPD matrix elements obtained from the lattice calculations. After the Fourier transforms, the quasi-GPDs are then matched to the light-cone GPDs within the framework of large momentum effective theory with improved matching, including the next-to-next-to-leading order perturbative corrections, and leading renormalon and renormalization group resummations. We also present the 3-dimensional image of the pion in impact-parameter space through the Fourier transform of the momentum transfer −t.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗